SPECIFICATION
Supplier : Samsung electro-mechanics Samsung P/N : CL31C471JIHNNNE
Product : Multi-layer Ceramic Capa citor Description : CAP, 470, 1000V, ±5%, C0G, 1206
CL 31 C471 J I H N N N E
⑤⑥⑦⑧⑨⑩⑪
Series Samsung Multi-layer Ceramic Capacitor
Size 1206 (inch code) L: 3.2 ± 0.2 mm W: ± 0.2 mm
Dielectric C0G Inner electrode
Capacitance 470 Termination
Capacitance ±5 %Plating (Pb Free)
tolerance Product Normal
Rated Voltage 1000 V Special Reserved for future use
Thickness 1.6 ± 0.2 mm Packaging Embossed Type,7"reel(2,000ea)
A. Samsung Part Number
1.6
Ni
Cu
Sn 100%
B. Samsung Reliability Test and Judgement condition
Capacitance Within specified tolerance 1±10% 0.5~5Vrms
Q1000 min
Insulation More than 500Mohm500±50 Vdc 60~120 sec.
Resistance
Appearance No abnormal exterior appearance Visual inspection
Withstanding No dielectric breakdown or of the rated voltage
Voltage mechanical breakdown
Temperature C0G
Characteristics (From -55 to 125, Capacitance change should be within ±30PPM/)
Adhesive Strength No peeling shall be occur on the 500gF, for 10±1 sec.
of Termination terminal electrode
Bending Strength Capacitance change : within ±5% Bending to the limit (1mm)
with 1.0mm/sec.
Solderability More than 75% of terminal surface SnAg3.0Cu0.5 solder
is to be soldered newly 245±5, 3±0.3sec.
(preheating : 80~120 for 10~30sec.)
Resistance to Capacitance change : within ±2.5% Solder pot : 270±5, 10±1sec.
Soldering heat Tan δ, IR : initial spec.
120%
Performance Test condition
Vibration Test Capacitance change : within ±2.5% Amplitude : 1.5mm
Tan δ, IR : initial spec. From 10 to 55 (return : 1min.)
2hours 3 direction (x, y, z)
Moisture Capacitance change : within ±7.5% With rated voltage
Resistance Q : 200 min 40±2, 90~95%RH, 500 +12/-0 hours
IR : More than 25·
High Temperature Capacitance change : within ±3% Wit
h
of the rated voltage
Resistance Q : 350 min Max. operating temperature
IR : More than 50·1000+48/-0 hours
Temperature Capacitance change : within ±2.5% 1 cycle condition
Cycling Tan δ, IR : initial spec. Min. operating temperature 25
Max. operating temperature 25
5 cycles test
C. Recommended Soldering method :
Reflow ( Reflow Peak Temperature : 260+0/-5, 10sec. Max )
* For the more detail Specification, Please refer to the Samsung MLCC catalogue.
Performance Test condition
100%