CD00002861 Rev 6.1 IN APPROVAL PAGE A ft Power Schottky rectifier -D ra Technical Literature Alternate Identifier(s) Key process 8616 Product Development Dr ISO Definition aft CUSTOM ATTRIBUTES ft - Confidentiality Level Specification Public Technical Literature Document Category Datasheet Dr a Document Type Document Family Original ID Original Repository Status IN APPROVAL Responsible Caramanna Marcello Keywords Technical Literature, 8616, Product Development, Specification, Datasheet, STPS41L60C, NOTICE: This document may have been revised since it was printed. Check Document Control System for latest version before using or copying. (c) Copyright STMicroelectronics. Unauthorized reproduction and communication strictly prohibited. DOCUMENT HISTORY Version Release Date Change Qualifier Rev 6.1 Document change Dr a ft - Dr aft -D ra ft 07/01/2014 AUTOMATIC REVALIDATION DATE WORKFLOW STARTED CD00002861 Rev 6.1 IN APPROVAL PAGE C DOCUMENT APPROVAL USER FUNCTION DATE Donohoo Sean Michael Document Controller 17-Apr-2015 Dr a ft - Dr aft -D ra ft LABEL NOTICE: This document may have been revised since it was printed. Check Document Control System for latest version before using or copying. (c) Copyright STMicroelectronics. Unauthorized reproduction and communication strictly prohibited. Document CD00002861 6.1 Revision IN APPROVAL 4 / 12 STPS41L60C Power Schottky rectifier Features A1 Low forward voltage drop Negligible switching losses Low thermal resistance Avalanche capability specified K A2 K ra Description I V STPS41L60CR STPS41L60CT A2 IO Dr a VRRM VR VAR A1 X IF A2 K ft - 2 x IO K TO-220AB "Forward" I A1 I2PAK aft Electrical characteristics A1 A2 K Dr Figure 1. (a) -D These dual center tap Schottky rectifiers are suited for switch mode power supplies and high frequency DC to DC converters. Packaged in D2PAK, I2PAK and TO-220AB, this device is intended for use in low voltage, high frequency inverters, free-wheeling and polarity protection applications. ft K D2PAK STPS41L60CG X V IR Table 1. VTo VF(Io) VF VF(2xIo) "Reverse" IAR Device summary IF(AV) 2 x 20 A VRRM 60 V Tj (max) 150 C VF (max) 0.58 V a. VARM and IARM must respect the reverse safe operating area defined in Figure 12 VAR and IAR are pulse measurements (tp < 1 s). VR, IR, VRRM and VF, are static characteristics July 2011 Doc ID 8616 Rev 6 1/9 www.st.com Copyright STMicroelectronics Company Internal 9 Unauthorized reproduction and communication strictly prohibited Document CD00002861 Characteristics Revision 6.1 IN APPROVAL 1 Characteristics Table 2. Absolute ratings (limiting values, per diode) Symbol VRRM STPS41L60C Parameter Value Unit 60 V 30 A 20 40 A Repetitive peak reverse voltage IF(RMS) Forward rms current IF(AV) Average forward current TC = 125 C = 0.5 IFSM Surge non repetitive forward current tp = 10 ms Sinusoidal 220 A Repetitive peak avalanche power tp = 1 s Tj = 25 C 9500 W 80 V 80 V -65 to + 175 C 150 C Tstg tp < 1 s, Tj < 150 C, IAR < 35 A Maximum single pulse peak avalanche voltage tp < 1 s, Tj < 150 C, IAR < 35 A Storage temperature range Maximum operating junction Tj temperature(3) -D VASM (2) ft VARM (2) Maximum repetitive peak avalanche voltage ra PARM(1) Per diode Per device 5 / 12 1. For temperature or pulse time duration deratings, refer to Figure 4 and Figure 5. More details regarding the avalanche energy measurements and diode validation in the avalanche are provided in the application notes AN1768 and AN2025. 2. Refer to Figure 12 1 - condition to avoid thermal runaway for a diode on its own heatsink < ------------------------Rth ( j - a ) Table 3. aft dPtot --------------dTj 3. Thermal resistances Parameter Junction to case Rth (c) Coupling Value Unit 1.5 0.8 C/W Per diode Total ft - Rth (j-c) Dr Symbol 0.1 Table 4. Symbol IR (1) Dr a When the diodes 1 and 2 are used simultaneously : Tj(diode 1) = P(diode1) x Rth(j-c)(Per diode) + P(diode 2) x Rth(c) Static electrical characteristics (per diode) Parameter Reverse leakage current Tests conditions Tj = 25 C Min. VR = VRRM 100 Tj = 125 C VF (1) Forward voltage drop Tj = 25 C IF = 20 A Tj = 125 C IF = 20 A Tj = 25 C IF = 40A Tj = 125 C IF = 40A Typ. Max. Unit 600 A 175 mA 0.60 0.50 0.58 V 0.77 0.67 0.71 1. Pulse test: tp = 380 s, < 2% To evaluate the conduction losses use the following equation: P = 0.42 x IF(AV) + 0.007 x IF2(RMS) 2/9 Copyright STMicroelectronics Doc ID 8616 Rev 6 Company Internal Unauthorized reproduction and communication strictly prohibited Document CD00002861 STPS41L60C Figure 2. 6.1 Revision IN APPROVAL Conduction losses versus average current Figure 3. PF(av)(W) 16 =1 16 =0.1 10 Rth(j-a)=Rth(j-c) 18 =0.2 12 / 12 Average forward current versus ambient temperature ( = 0.5) 20 14 6 IF(av)(A) 22 =0.5 Characteristics 14 =0.05 12 8 10 T 6 8 Rth(j-a)=50 C/W 6 T 4 =tp/T tp 4 2 IF(av)(A) =tp/T 2 tp 0 Tamb(C) 0 15 20 25 Normalized avalanche power derating versus pulse duration 0 25 Figure 5. 50 75 100 125 150 Normalized avalanche power derating versus junction temperature ra Figure 4. 10 ft 5 PARM(Tj) PARM(25 C) PARM(tp) PARM(1 s) 1.2 1 1 0.8 aft 0.1 -D 0 0.6 0.4 Dr 0.01 0.2 tp(s) 0.001 0.1 10 100 1000 Non repetitive surge peak forward current versus overload duration (maximum values) Dr a Figure 6. 250 1 ft - 0.01 IM(A) 225 200 25 50 Figure 7. 1.0 75 100 125 150 Relative variation of thermal impedance junction to case versus pulse duration Zth(j-c)/Rth(j-c) Single pulse 0.9 0.8 175 0.7 150 0.6 Tc=25 C 125 0.5 Tc=75 C 100 75 50 Tj(C) 0 0.4 0.3 T Tc=125 C 0.2 IM 25 0.1 t t(s) =0.5 0 1.E-03 1.E-02 1.E-01 1.E+00 1.E-03 Doc ID 8616 Rev 6 Copyright STMicroelectronics =tp/T tp(s) tp 0.0 Company Internal 1.E-02 1.E-01 1.E+00 3/9 Unauthorized reproduction and communication strictly prohibited Document CD00002861 Characteristics Figure 8. 1.E+03 6.1 Revision IN APPROVAL Reverse leakage current versus reverse voltage applied (typical values) Figure 9. IR(mA) STPS41L60C 7 / 12 Junction capacitance versus reverse voltage applied (typical values) C(nF) 10.0 Tj=150C 1.E+02 F=1 MHz VOSC= 30 mV Tj=25 C Tj=125C Tj=100C 1.E+01 Tj=75C 1.E+00 1.0 Tj=50C Tj=25C 1.E-01 VR(V) VR(V) 1.E-02 0.1 10 15 20 25 30 35 40 45 50 55 10 100 Figure 11. Thermal resistance junction to ambient versus copper surface under tab (STPS41L60CG only) ra Figure 10. Forward voltage drop versus forward current 100 1 60 ft 5 IFM(A) 80 70 Tj=125 C (Maximum values) 60 Tj=125 C (Typical values) Rth(j-a)(C/W) -D 0 Epoxy printed circuit board copper thickness = 35 m aft 50 10 40 Tj=25 C (Maximum values) Dr 30 20 10 VFM(V) 0.0 0.2 0.4 ft - 1 0.6 0.8 1.0 S(cm) 0 1.2 0 5 10 15 20 25 30 35 40 Dr a Figure 12. Reverse safe operating area (tp < 1 s, Tj > 150 C) 50 IARM (A) 45 Forbidden area 40 35 Operating area 30 25 VARM (V) 20 60 4/9 Copyright STMicroelectronics 65 70 75 80 85 90 Doc ID 8616 Rev 6 Company Internal Unauthorized reproduction and communication strictly prohibited Document CD00002861 STPS41L60C 2 6.1 Revision IN APPROVAL Package information 8 / 12 Package information Epoxy meets UL94,V0 Cooling method: by conduction (C) Recommended torque value: 0.4 to 0.6 N*m In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK(R) packages, depending on their level of environmental compliance. ECOPACK(R) specifications, grade definitions and product status are available at: www.st.com. ECOPACK(R) is an ST trademark. Figure 13. Package dimensions I2PAK Dimensions L2 Dr A1 b1 L c Dr a e1 ft - b e aft D L1 Doc ID 8616 Rev 6 Copyright STMicroelectronics Max. Min. Max. A 4.40 4.60 0.173 0.181 A1 2.49 2.69 0.098 0.106 b 0.70 0.93 0.028 0.037 b1 1.14 1.17 0.044 0.046 b2 1.14 1.17 0.044 0.046 -D c2 Company Internal Inches Min. ra A E Millimeters ft Ref. c 0.45 0.60 0.018 0.024 c2 1.23 1.36 0.048 0.054 D 8.95 9.35 0.352 0.368 e 2.40 2.70 0.094 0.106 E 10.0 10.4 0.394 0.409 L 13.1 13.6 0.516 0.535 L1 3.48 3.78 0.137 0.149 L2 1.27 1.40 0.050 0.055 5/9 Unauthorized reproduction and communication strictly prohibited Document CD00002861 Revision Package information 6.1 IN APPROVAL STPS41L60C 9 / 12 Figure 14. Package dimensions D2PAK Dimensions Ref. A E C2 L2 Millimeters Inches Min. Max. Min. Max. A 4.40 4.60 0.173 0.181 A1 2.49 2.69 0.098 0.106 A2 0.03 0.23 0.001 0.009 B 0.70 0.93 0.027 0.037 B2 1.14 1.70 0.045 0.067 C 0.45 0.60 0.017 0.024 C2 1.23 1.36 0.048 0.054 D L L3 B2 9.35 0.352 0.368 E 10.00 10.40 0.393 0.409 G 4.88 5.28 0.192 0.208 L 15.00 15.85 0.590 0.624 L2 1.27 1.40 0.050 0.055 L3 1.40 1.75 0.055 0.069 M 2.40 3.20 0.094 0.126 ra G * -D A2 aft V2 Dr * FLAT ZONE NO LESS THAN 2mm ft - Figure 15. Footprint 8.95 R C B M D ft A1 R 0.40 typ. V2 0 0 8 Dr a 5.08 1.30 8.90 Copyright STMicroelectronics 8 16.90 10.30 6/9 0.016 typ. 3.70 Doc ID 8616 Rev 6 Company Internal Unauthorized reproduction and communication strictly prohibited Document CD00002861 STPS41L60C Revision 6.1 IN APPROVAL 10 Package information / 12 Figure 16. Package dimensions TO-220AB Dimensions Ref. Dia C L5 L7 L6 L2 F2 Max. Min. Max. A 4.40 4.60 0.173 0.181 C 1.23 1.32 0.048 0.051 D 2.40 2.72 0.094 0.107 E 0.49 0.70 0.019 0.027 F 0.61 0.88 0.024 0.034 F1 1.14 1.70 0.044 0.066 F2 1.14 1.70 0.044 0.066 4.95 5.15 0.194 0.202 G1 2.40 2.70 0.094 0.106 H2 10 10.40 0.393 0.409 ra G D L9 L4 F -D F1 L2 M G1 aft E 16.4 typ. 0.645 typ. L4 13 14 0.511 0.551 L5 2.65 2.95 0.104 0.116 L6 15.25 15.75 0.600 0.620 L7 6.20 6.60 0.244 0.259 L9 3.50 3.93 0.137 0.154 M Diam. 2.6 typ. 3.75 3.85 0.102 typ. 0.147 0.151 Dr a ft - Dr G Inches Min. ft A H2 Millimeters Doc ID 8616 Rev 6 Copyright STMicroelectronics Company Internal 7/9 Unauthorized reproduction and communication strictly prohibited Document CD00002861 Revision Ordering information 11 STPS41L60C / 12 Ordering information Table 5. Ordering information Order code Marking Package Weight Base qty Delivery mode STPS41L60CG STPS41L60CG D2PAK 1.48 g 50 Tube STPS41L60CG-TR STPS41L60CG D2PAK 1.48 g 1000 Tape and reel STPS41L60CT TO-220AB 2.20 g 50 Tube STPS41L60CR 2PAK 1.49 g 50 Tube STPS41L60CT STPS41L60CR I ra Document revision history -D Table 6. ft Revision history Date Revision July 2003 3A 10-Jan-2007 4 Reformated to current standards. Added ECOPACK statement Removed IRRM and dV/dT from the Absolute ratings table on page 1. Updated reverse leakage current values in Table 3 and Figure 7. 28-May-2007 5 Updated figures 1, 2, and 5 to 10. 15-Jul-2011 6 Added electrical diagram on first page. Added parameters VARM and VASM to Table 2. Added Figure 12. Previous issue Changes aft 4 IN APPROVAL Dr a ft - Dr 3 6.1 8/9 Copyright STMicroelectronics Doc ID 8616 Rev 6 Company Internal Unauthorized reproduction and communication strictly prohibited Document CD00002861 STPS41L60C Revision 6.1 IN APPROVAL 12 / 12 Please Read Carefully: ra ft Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. -D Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. aft No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. Dr UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. Dr a ft - UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2011 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com Doc ID 8616 Rev 6 Copyright STMicroelectronics Company Internal 9/9 Unauthorized reproduction and communication strictly prohibited