© Coilcraft, Inc. 2009
Specifications subject to change without notice.
Please check our website for latest information.
Chip Inductors - 0603LS Series (1608)
Document 264-1
Document 264-1 Revised 10/06/08
• Higher inductance values than other 0603 inductors
• Ferrite construction for high current handling
• Inductance values: 47 nH – 22 µH; 5% and 2% tolerance
100 1000
100
1000
10000
100000
Inductance (nH)
110
10
Frequency (MHz)
8200 nH
3300 nH
1000 nH
330 nH
100 nH
Typical L vs Frequency
Irms Derating
Designer’s Kit C347 contains 10 each of all 5% values
Core material Ceramic/Ferrite
Terminations RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Weight 4.8 – 6.2 mg
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+100°C with derated current
Storage temperature Component: –40°C to +100°C.
Packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL) +50 to +150 ppm/°C
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
One per billion hours / one billion hours, calculated per Telcordia SR-332
Packaging 2000 per 7″ reel. Plastic tape: 8 mm wide, 0.23 mm thick,
4 mm pocket spacing, 1.1 mm pocket depth
PCB washing Only pure water or alcohol recommended
35
30
25
20
15
10
5
00.1 1 10 100
Frequency (MHz)
Q factor
8200 nH
3300 nH
1000 nH
330 nH
100 nH
Typical Q vs Frequency
-40 -20 0 20 40 60 80 100 120
Ambient temperature (°C)
120
110
100
90
80
70
60
50
40
30
20
10
0
Percent of rated rmsI
25°C
© Coilcraft, Inc. 2009
Specifications subject to change without notice.
Please check our website for latest information.
Document 264-2
Document 264-2 Revised 10/06/08
Chip Inductors – 0603LS Series
Inductance2Percent SRF min4DCR max5Irms6Color Overall
Part number1(nH) tolerance Q min3(MHz) (Ohms) (A) code width
0603LS-47NX_L_ 47 @ 7.9 MHz 5,2 12 @ 7.9 MHz 1500 0.075 1.40 Black B1
0603LS-51NX_L_ 51 @ 7.9 MHz 5,2 12 @ 7.9 MHz 1400 0.075 1.00 Violet B1
0603LS-72NX_L_ 72 @ 7.9 MHz 5,2 12 @ 7.9 MHz 1400 0.12 1.40 Brown B1
0603LS-101X_L_ 100 @ 7.9 MHz 5,2 12 @ 7.9 MHz 1150 0.13 1.40 Red B1
0603LS-121X_L_ 120 @ 7.9 MHz 5,2 12 @ 7.9 MHz 1100 0.15 1.40 Orange B1
0603LS-151X_L_ 150 @ 7.9 MHz 5,2 15 @ 7.9 MHz 1050 0.15 1.30 Yellow B1
0603LS-181X_L_ 180 @ 7.9 MHz 5,2 15 @ 7.9 MHz 950 0.15 1.30 Green B1
0603LS-241X_L_ 240 @ 7.9 MHz 5,2 15 @ 7.9 MHz 800 0.16 0.95 Violet B1
0603LS-271X_L_ 270 @ 7.9 MHz 5,2 15 @ 7.9 MHz 775 0.30 0.71 Gray B1
0603LS-331X_L_ 330 @ 7.9 MHz 5,2 15 @ 7.9 MHz 725 0.46 0.56 White B1
0603LS-391X_L_ 390 @ 7.9 MHz 5,2 15 @ 7.9 MHz 620 0.51 0.50 Black B1
0603LS-471X_L_ 470 @ 7.9 MHz 5,2 15 @ 7.9 MHz 540 0.62 0.42 Brown B1
0603LS-561X_L_ 560 @ 7.9 MHz 5,2 15 @ 7.9 MHz 525 0.44 0.55 Red B1
0603LS-681X_L_ 680 @ 7.9 MHz 5,2 15 @ 7.9 MHz 260 0.52 0.47 Orange B2
0603LS-781X_L_ 780 @ 7.9 MHz 5,2 15 @ 7.9 MHz 460 0.83 0.39 Yellow B1
0603LS-821X_L_ 820 @ 7.9 MHz 5,2 15 @ 7.9 MHz 410 0.69 0.40 Green B2
0603LS-102X_L_ 1000 @ 7.9 MHz 5,2 15 @ 7.9 MHz 190 0.81 0.40 Blue B2
0603LS-122X_L_ 1200 @ 7.9 MHz 5,2 15 @ 7.9 MHz 160 0.87 0.37 Violet B2
0603LS-152X_L_ 1500 @ 7.9 MHz 5,2 15 @ 7.9 MHz 100 0.96 0.35 Gray B2
0603LS-182X_L_ 1800 @ 7.9 MHz 5,2 15 @ 7.9 MHz 80 1.1 0.35 White B2
0603LS-222X_L_ 2200 @ 7.9 MHz 5,2 15 @ 7.9 MHz 68 1.2 0.32 Black B2
0603LS-272X_L_ 2700 @ 7.9 MHz 5,2 15 @ 7.9 MHz 60 1.5 0.28 Brown B2
0603LS-332X_L_ 3300 @ 7.9 MHz 5,2 15 @ 7.9 MHz 42 1.5 0.28 Red B2
0603LS-392X_L_ 3900 @ 7.9 MHz 5,2 15 @ 7.9 MHz 40 1.6 0.28 Orange B2
0603LS-472X_L_ 4700 @ 7.9 MHz 5,2 15 @ 7.9 MHz 34 2.1 0.26 Yellow B2
0603LS-562X_L_ 5600 @ 7.9 MHz 5,2 15 @ 7.9 MHz 32 2.6 0.24 Green B2
0603LS-682X_L_ 6800 @ 7.9 MHz 5,2 15 @ 7.9 MHz 31 3.1 0.20 Black B2
0603LS-782X_L_ 7800 @ 7.9 MHz 5,2 15 @ 7.9 MHz 28 3.5 0.20 Blue B2
0603LS-822X_L_ 8200 @ 7.9 MHz 5,2 15 @ 7.9 MHz 26 3.6 0.19 Violet B2
0603LS-103X_L_ 10,000 @ 2.5 MHz 5,2 12 @ 2.5 MHz 25 4.8 0.18 Gray B2
0603LS-153X_L_ 15,000 @ 2.5 MHz 5,2 20 @ 2.5 MHz 23 7.1 0.17 White B2
0603LS-183X_L_ 18,000 @ 2.5 MHz 5,2 20 @ 2.5 MHz 22 7.6 0.16 Brown B2
0603LS-223X_L_ 22,000 @ 2.5 MHz 5,2 22 @ 2.5 MHz 19 8.81 0.13 Black B2
1. When ordering, specify tolerance, termination and packaging codes:
0603LS-822XJLC
Tolerance: G=2% J = 5% (Table shows stock tolerances in bold.)
Termination: L = RoHS compliant silver-palladium-platinum-glass frit.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or
S = non-RoHS tin-lead (63/37).
Packaging: C =7″ machine-ready reel. EIA-481 embossed plastic
tape (2000 parts per full reel).
B= Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
2. Inductance measured at 0.1 Vrms, using Coilcraft SMD-A fixture in
Agilent/HP 4286A impedance analyzer with Coilcraft-provided
correlation pieces.
3. Q measured on Agilent/HP 4395A with Agilent/HP 16193 test fixture.
4. SRF measured using Agilent/HP 8753D network analyzer with Coilcraft
SMD-D test fixture.
5. DCR measured on Cambridge Technology Micro-ohmmeter.
6. Current that causes a 15°C temperature rise from 25°C ambient.
Because of their open construction, these parts will not saturate.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
ACD
max B max ref E F G H IJ
0.071 0.044 0.015 0.030 0.013 0.034 0.040 0.025 0.025 inches
1,80 1,12 0,38 0,76 0,33 0,86 1,02 0,64 0,64 mm
A
B
overall
C
D
Terminal wraparound:
approx 0.008/0,20 both ends
I
I
J
F
F
G
H
E
terminal
Recommended
Land Pattern
Note:
B1 = 0.040 ±0.004 in / 1,016 ±0,102 mm
B2 = 0.046 ±0.004 in / 1,169 ±0,102 mm
See
note
