DATA SHEE
T
SURFACE-MOUNT CERAMIC
MULTILAYER CAPACITORS
General purpose & High capacitance
Class 2, Y5V
6.3 V TO 50
V
10 nF to 47 µF
RoHS compliant & Halogen Free
Product Specification – Jul 29, 2010 V.5
www.yageo.com
J
ul 29, 2010 V.5
General Purpose & High Cap.
6.3 V to 50 V
Surface-Mount Ceramic Multilayer Capacitors
2
14
Product specification
Y5V
ORDERING INFORMATION - GLOBAL PART NUMBER, PHYCOMP
CTC & 12NC
All part numbers are identified by the series, size, tolerance, TC material,
packing style, voltage, process code, termination and capacitance value.
Y
YA
AG
GE
EO
O
B
BR
RA
AN
ND
D
o
or
rd
de
er
ri
in
ng
g
c
co
od
de
e
GLOBAL PART NUMBER (PREFERRED)
CC
XXXX X X
Y5V
X
BB
XXX
(1) (2) (3) (4) (5)
(1) SIZE – INCH BASED (METRIC)
0201 (0603)
0402 (1005)
0603 (1608)
0805 (2012)
1206 (3216)
1210 (3225)
(2) TOLERANCE
M = ±20%
Z = –20% to +80%
(3) PACKING STYLE
R = Paper/PE taping reel; Reel 7 inch
K = Blister taping reel; Reel 7 inch
P = Paper/PE taping reel; Reel 13 inch
F = Blister taping reel; Reel 13 inch
C = Bulk case
(4) RATED VOLTAGE
5 = 6.3 V
6 = 10 V
7 = 16 V
8 = 25 V
9 = 50 V
(5) CAPACITANCE VALUE
2 significant digits+number of zeros
The 3rd digit signifies the multiplying factor, and letter R is decimal point
Example: 103 = 10 x 103 = 10,000 pF = 10 nF
SCOPE
This specification describes Y5V
series chip capacitors with lead-
free terminations.
APPLICATIONS
Consumer electronics, for
example:
- Tuners
- Television receivers
- Video recorders
- All types of cameras
- Mobile telephones
FEATURES
Supplied in tape on reel
Nickel-barrier end termination
RoHS compliant
Halogen Free compliant
www.yageo.com
J
ul 29, 2010 V.5
General Purpose & High Cap.
6.3 V to 50 V
Surface-Mount Ceramic Multilayer Capacitors
3
14
Product specification
Y5V
handbook, full pagewidth
2 2 X X X X X X 9 X X X
Carrier type
50 = Blister (6.3 V)
55 = Paper/PE (6.3 V)
22 = Blister
38 = Paper/PE
54 = Bulk
Voltage
20 = 6.3 V
24 = 10 V
78 = 16 V
91 = 25 V
58 = 50 V
Size
8 = 0201
7 = 0402
6 = 0603
0 = 0805
1 = 1206
2 = 1210
Capacitance value
(1)
Tolerance
7 = ±20%
8 = −20 to +80%
Packaging
(2)
1 = reel: ∅180 mm; 7"
5 = reel: ∅330 mm; 13"
4 = bulk case
YNM0009
P
PH
HY
YC
CO
OM
MP
P
B
BR
RA
AN
ND
D
o
or
rd
de
er
ri
in
ng
g
c
co
od
de
es
s
GLOBAL PART NUMBER (preferred), PHYCOMP CTC (for North America) and 12NC (traditional) codes are
acceptable to order Phycomp brand products.
GLOBAL PART NUMBER (PREFERRED)
For detailed information of GLOBAL PART NUMBER and ordering example, please refer to page 2.
12NC CODE
PHYCOMP CTC CODE (FOR NORTH AMERICA)
Example: 12062F105M8BB0D
1206 2F 105 M 8 B B 0 D
Size
code
Temp.
Char.
Capacitance
in pF Tolerance Voltage Termination Packing Marking Range identifier
0201
0402
0603
0805
1206
1210
2F = Y5V
101 = 100 pF;
the third digit
signifies the
multiplying factor:
0 = × 1
1 = × 10
2 = × 100
3 = × 1,000
4 = x 10,000
5 = x 100,000
6 = x 1,000,000
M = ±20%
Z = –20% to +80%
5 = 6.3 V
6 = 10 V
7 = 16 V
8 = 25 V
9 = 50 V
B = NiSn 2 = 180 mm
7” Paper/PE
3 = 330 mm
13” Paper/PE
B = 180 mm
7” Blister
F = 330 mm
13” Blister
P = Bulk case
0 = no marking D = Class 2 MLCC
(1) Please refer to "Last 2-digit of 12NC" in "CAPACITANCE RANGE & THICKNESS FOR Y5V"
(2) Quantity on reel depends on thickness classification; see table 5
www.yageo.com
J
ul 29, 2010 V.5
General Purpose & High Cap.
6.3 V to 50 V
Surface-Mount Ceramic Multilayer Capacitors
4
14
Product specification
Y5V
MBB211
T
L4
L1
L2L3
W
For dimension see Table 1
O
OU
UT
TL
LI
IN
NE
ES
S
Fig. 2 Surface mounted multilayer ceramic
capacitor dimension
CONSTRUCTION
The capacitor consists of a
rectangular block of ceramic
dielectric in which a number of
interleaved metal electrodes are
contained. This structure gives
rise to a high capacitance per
unit volume.
The inner electrodes are
connected to the two end
terminations and finally covered
with a layer of plated tin (NiSn).
The terminations are lead-free. A
cross section of the structure is
shown in Fig.1.
MLB457
terminations
electrodes
ceramic material
Fig. 1 Surface mounted multilayer ceramic capacito
r
construction
L2 / L3 (mm) L4 (mm)
TYPE L1 (mm) W (mm) T (MM) min. max. min.
0201
0
.
6
±
0
.
03
0
.
3
±
0
.
03
0
.1
0
0
.2
0
0
.2
0
0402 1.0 ±0.05 0.5 ±0.05 0.20 0.30 0.40
0603 1.6 ±0.10 0.8 ±0.10 0.20 0.60 0.40
2.0 ±0.10 (1) 1.25 ±0.10
(1)
0805 2.0 ±0.20 (2) 1.25 ±0.20
(2) 0.25 0.75 0.55
3.2 ±0.15 (1) 1.6 ±0.15
(1)
1206 3.2 ±0.30 (2) 1.6 ±0.20
(2) 0.25 0.75 1.40
3.2 ±0.20 (1) 2.5 ±0.20 (1)
1210 3.2 ±0.40 (2) 2.5 ±0.30
(2) 0.25 0.75 1.40
4.5 ±0.20 (1) 3.2 ±0.20 (1)
1812 4.5 ±0.40 (2) 3.2 ±0.40 (2)
Refer to
table 2 to 4
0.25 0.75 2.20
NOTE
1. Dimension for size 0805 to 1812, C ≤ 100 nF
2. Dimension for size 0805 to 1812, C > 100 nF
Table 1 For outlines see fig. 2
DIMENSION
www.yageo.com
J
ul 29, 2010 V.5
General Purpose & High Cap.
6.3 V to 50 V
Surface-Mount Ceramic Multilayer Capacitors
5
14
Product specification
Y5V
CAPACITANCE RANGE & THICKNESS FOR Y5V
Table 2 Sizes from 0201 to 0402
CAP. Last 2-digit of 12NC 0201 0402
≤ 25 V 50 V
6.3 V 25 V 6.3 V 10 V 16 V 25 V 50 V
10 nF 36 05 0.3±0.03 0.5±0.05
22 nF 41 07
47 nF 45 09
100 nF 49 12 0.3±0.03
0.5±0.05
220 nF 52 14
470 nF 58 16
0.5±0.05
1.0 µF 63 18
0.5±0.05
0.5±0.05
2.2 µF 67
4.7 µF 72
10 µF 76
22 µF 81
47 µF 85
Table 3 Sizes from 0603 to 0805
CAP. Last 2-digit of 12NC 0603 0805
≤ 25 V 50 V
6.3 V 10 V 16 V 25 V 50 V 6.3 V 10 V 16 V 25 V 50 V
10 nF 36 05
22 nF 41 07
47 nF 45 09
100 nF 49 12
0.8±0.1
0.6±0.1 0.6±0.1
220 nF 52 14 0.6±0.1
470 nF 58 16
0.8±0.1
0.85±0.1
1.0 µF 63 18
0.85±0.1
1.25±0.2
2.2 µF 67
0.8±0.1
0.8±0.1
0.85±0.1
0.85±0.1
1.25±0.2
4.7 µF 72
0.8±0.1
0.85±0.1 0.85±0.1
1.25±0.2
10 µF 76
1.25±0.2
22 µF 81
1.25±0.2 1.25±0.2
47 µF 85
NOTE
1. Values in shaded cells indicate thickness class in mm
2. Capacitance value of non E-3 series is on request
www.yageo.com
J
ul 29, 2010 V.5
General Purpose & High Cap.
6.3 V to 50 V
Surface-Mount Ceramic Multilayer Capacitors
6
14
Product specification
Y5V
Table 4 Sizes from 1206 to 1210
CAP. Last 2-digit of 12NC 1206 1210
≤ 25 V 50 V
6.3 V 10 V 16 V 25 V 50 V 6.3 V 10 V 16 V 25 V
10 nF 36 05
22 nF 41 07
47 nF 45 09
100 nF 49 12
220 nF 52 14
0.6±0.1 0.6±0.1
470 nF 58 16
1.0 µF 63 18
0.85±0.1
2.2 µF 67
0.85±0.1
4.7 µF 72
0.85±0.1
10 µF 76 0.85±0.1
0.85±0.1
1.15±0.1 1.5±0.1 1.5±0.1 1.5±0.1
22 µF 81 1.6±0.2 1.6±0.2 1.6±0.2
1.6±0.2
1.6±0.2 1.6±0.2
47 µF 85 2.0±0.2
NOTE
1. Values in shaded cells indicate thickness class in mm
2. Capacitance value of non E-3 series is on request
CAPACITANCE RANGE & THICKNESS FOR Y5V
www.yageo.com
J
ul 29, 2010 V.5
General Purpose & High Cap.
6.3 V to 50 V
Surface-Mount Ceramic Multilayer Capacitors
7
14
Product specification
Y5V
Table 5
THICKNESS CLASSES AND PACKING QUANTITY
Ø180 MM / 7 INCH Ø330 MM / 13 INCH
SIZE
CODE
THICKNESS
CLASSIFICATION
TAPE WIDTH
QUANTITY PER REEL Paper Blister Paper Blister QUANTITY
PER BULK CASE
0201 0.3 ±0.03 mm 8 mm 15,000 --- 50,000 --- ---
0402 0.5 ±0.05 mm 8 mm 10,000 --- 50,000 --- 50,000
0603 0.8 ±0.1 mm 8 mm 4,000 --- 15,000 --- 15,000
0.6 ±0.1 mm 8 mm 4,000 --- 20,000 --- 10,000
0805 0.85 ±0.1 mm 8 mm 4,000 --- 15,000 --- 8,000
1.25 ±0.2 mm 8 mm --- 3,000 --- 10,000 5,000
0.6 ±0.1 mm 8 mm 4,000 --- 20,000 --- ---
0.85 ±0.1 mm 8 mm 4,000 --- 15,000 --- ---
1.00 / 1.15 ±0.1 mm 8 mm --- 3,000 --- 10,000 ---
1.25 ±0.2 mm 8 mm --- 3,000 --- 10,000 ---
1.6 ±0.15 mm 8 mm --- 2,500 --- 10,000 ---
1206
1.6 ±0.2 mm 8 mm --- 2,000 --- 10,000 ---
0.6 / 0.7 ±0.1 mm 8 mm --- 4,000 --- 15,000 ---
0.85 ±0.1 mm 8 mm --- 4,000 --- 10,000 ---
1.15 ±0.1 mm 8 mm --- 3,000 --- 10,000 ---
1.15 ±0.15 mm 8 mm --- 3,000 --- 10,000 ---
1.25 ±0.2 mm 8 mm --- 3,000 --- --- ---
1.5 ±0.1 mm 8 mm --- 2,000 --- --- ---
1.6 / 1.9 ±0.2 mm 8 mm --- 2,000 --- --- ---
2.0 ±0.2 mm 8 mm --- 2,000
1,000 --- --- ---
1210
2.5 ±0.2 mm 8 mm --- 1,000
500 --- --- ---
1.15 ±0.15 mm 12 mm --- 3,000 --- --- ---
1.25 ±0.2 mm 12 mm --- 3,000 --- --- ---
1.35 ±0.15 mm 12 mm --- 2,000 --- --- ---
1.5 ±0.1 mm 12 mm --- 2,000 --- --- ---
1.6 ±0.2 mm 12 mm --- 2,000 --- --- ---
1808
2.0 ±0.2 mm 12 mm --- 2,000 --- --- ---
0.6 / 0.85 ±0.1 mm 12 mm --- 2,000 --- --- ---
1.15 ±0.1 mm 12 mm --- 1,000 --- --- ---
1.25 ±0.2 mm 12 mm --- 1,000 --- --- ---
1.5 ±0.1 mm 12 mm --- 1,000 --- --- ---
1.6 ±0.2 mm 12 mm --- 1,000 --- --- ---
2.0 ±0.2 mm 12 mm --- 1,000 --- --- ---
1812
2.5 ±0.2 mm 12 mm --- 500 50,000 --- ---
www.yageo.com
J
ul 29, 2010 V.5
General Purpose & High Cap.
6.3 V to 50 V
Surface-Mount Ceramic Multilayer Capacitors
8
14
Product specification
Y5V
ELECTRICAL CHARACTERISTICS
Y
Y5
5V
V
D
DI
IE
EL
LE
EC
CT
TR
RI
IC
C
C
CA
AP
PA
AC
CI
IT
TO
OR
RS
S;
;
N
NI
IS
SN
N
T
TE
ER
RM
MI
IN
NA
AT
TI
IO
ON
NS
S
Unless otherwise specified, all test and measurements shall be made under standard atmospheric conditions
for testing as given in 5.3 of IEC 60068-1:
- Temperature: 15 °C to 35 °C
- Relative humidity: 25% to 75%
- Air pressure: 86 kPa to 106 kPa
Before the measurements are made, the capacitor shall be stored at the measuring temperature for a time
sufficient to allow the entire capacitor to reach this temperature.
The period as prescribed for recovery at the end of a test is normally sufficient for this purpose.
DESCRIPTION VALUE
Capacitance range 10 nF to 47 µF
Capacitance tolerance ±20%
–20% to +80%
Dissipation factor (D.F.)
≤ 6.3 V ≤ 15%
Exception: 0805 ≥ 22 µF ≤ 20%
10 V ≤ 12.5%
Exception: 0402 ≥ 680 nF; 0603 ≥ 2.2 µF; ≤ 15%
0805 ≥ 10 µF; 1206 ≥ 10 µF ≤ 20%
16 V ≤ 12.5%
Exception: 0603 ≥ 4.7 µF ≤ 15%
≥ 25 V ≤ 9%
Exception: 0201 ≥ 10 nF ≤ 12.5%
Insulation resistance after 1 minute at Ur (DC) Rins ≥ 10 GΩ or Rins × Cr ≥ 500 seconds whichever is less
Maximum capacitance change as a function of temperature
(temperature characteristic/coefficient): +22% to –82%
Operating temperature range: –30 °C to +85 °C
Table 6
www.yageo.com
J
ul 29, 2010 V.5
General Purpose & High Cap.
6.3 V to 50 V
Surface-Mount Ceramic Multilayer Capacitors
9
14
Product specification
Y5V
30 95
25
100
75
YNM0019
50
25
0
-5 20 55 70
Δ
T ( C)
o
C
(%)
C
Fig. 3 Typical capacitance change as a function of
temperature
050
15
110
85
YNM0020
60
35
10
10 20 30 40
Δ
C
(%)
V (V)
DC
C
25 V
10 V
50 V
16 V
Fig. 4 Typical capacitance change with respect to the
capacitance at 1 V as a function of DC voltage at
20 °C
25 100
0
500
MBD078
1000
1500
2000
0 255075
T ( C)
o
tan
δ
(x 10 )
4
Fig. 5 Typical tan δ as a function of temperature
SOLDERING RECOMMEND
A
TION
Table 7
SOLDERING
METHOD SIZE
0402 0603 0805 1206 ≥ 1210
Reflow ≥ 0.1 µF ≥ 1.0 µF ≥ 2.2 µF ≥ 4.7 µF Reflow only
Reflow/Wave < 0.1 µF < 1.0 µF < 2.2 µF < 4.7 µF ---
www.yageo.com
J
ul 29, 2010 V.5
General Purpose & High Cap.
6.3 V to 50 V
Surface-Mount Ceramic Multilayer Capacitors
10
14
Product specification
Y5V
TESTS AND REQUIREMENTS
Table 8 Test procedures and requirements
TEST TEST METHOD PROCEDURE REQUIREMENTS
Mounting IEC 60384
-
21/22
4.3 The capacitors may be mounted on printed-circuit boards or
ceramic substrates
No visible damage
Visual
inspection and
dimension
check
4.4 Any applicable method using × 10 magnification In accordance with specification
Capacitance (1) 4.5.1 Class 2:
At 20 °C, 24 hrs after annealing
f = 1 KHz for C ≤ 10 µF, rated voltage > 6.3 V, measuring at
voltage 1 Vrms at 20 °C
f = 1 KHz, for C ≤ 10 µF, rated voltage ≤ 6.3 V, measuring at
voltage 0.5 Vrms at 20 °C
f = 120 Hz for C > 10 µF, measuring at voltage 0.5 Vrms at 20 °C
Within specified tolerance
Dissipation
factor (D.F.) (1)
4.5.2 Class 2:
At 20 °C, 24 hrs after annealing
f = 1 KHz for C ≤ 10 µF, rated voltage > 6.3 V, measuring at
voltage 1 Vrms at 20 °C
f = 1 KHz, for C ≤ 10 µF, rated voltage ≤ 6.3 V, measuring at
voltage 0.5 Vrms at 20 °C
f = 120 Hz for C > 10 µF, measuring at voltage 0.5 Vrms at 20 °C
In accordance with specification
Insulation
resistance
4.5.3 At Ur (DC) for 1 minute In accordance with specification
Temperature
characteristic
4.6 Class 2:
Between minimum and maximum temperature
Y5V: -30 °C to +85 °C
Normal Temperature: 20 °C
<General purpose series>
∆C/C
Class 2:
Y5V: 22% to -82%
<High Capacitance series>
∆C/C
Class 2:
Y5V: 22% to -82%
Adhesion 4.7
A force applied for 10 seconds to the line joining the termination
s
and in a plane parallel to the substrate
Force
size ≥ 0603: 5N
size = 0402: 2.5N
size = 0201: 1N
NOTE:
1. For individual product specification, please contact local sales.
www.yageo.com
J
ul 29, 2010 V.5
General Purpose & High Cap.
6.3 V to 50 V
Surface-Mount Ceramic Multilayer Capacitors
11
14
Product specification
Y5V
TEST TEST METHOD PROCEDURE REQUIREMENTS
Mounting in accordance with IEC 60384-22
paragraph 4.3
No visible damage
Bond
strength of
plating on
end face
IEC 60384-
21/22
4.8
Conditions: bending 1 mm at a rate of 1 mm/s,
radius jig 340 mm
<General purpose series>
∆C/C
Class2:
Y5V: ±10%
<High Capacitance series>
∆C/C
Class2:
Y5V: ±10%
Dissolution of the end face plating shall not
exceed 25% of the length of the edge
concerned
<General purpose series>
∆C/C
Class2:
Y5V: ±20%
<High Capacitance series>
∆C/C
Class2:
Y5V: ±20%
Resistance to
soldering
heat
4.9
Precondition: 150 +0/–10 °C for 1 hour, then keep
for 24 ±1 hours at room temperature
Preheating: for size ≤ 1206: 120 °C to 150 °C for 1
minute
Preheating: for size >1206: 100 °C to 120 °C for 1
minute and 170 °C to 200 °C for 1 minute
Solder bath temperature: 260 ±5 °C
Dipping time: 10 ±0.5 seconds
Recovery time: 24 ±2 hours
D.F. within initial specified value
Rins within initial specified value
Solderability 4.10 Preheated the temperature of 80 °C to 140 °C and
maintained for 30 seconds to 60 seconds.
Test conditions for lead containing solder alloy
Temperature: 235 ±5 °C
Dipping time: 2 ±0.2 seconds
Depth of immersion: 10 mm
Alloy Composition: 60/40 Sn/Pb
Number of immersions: 1
Test conditions for leadfree containing solder alloy
Temperature: 245 ±5 °C
Dipping time: 3 ±0.3 seconds
Depth of immersion: 10 mm
Alloy Composition: SAC305
Number of immersions: 1
The solder should cover over 95% of the
critical area of each termination
www.yageo.com
J
ul 29, 2010 V.5
General Purpose & High Cap.
6.3 V to 50 V
Surface-Mount Ceramic Multilayer Capacitors
12
14
Product specification
Y5V
TEST TEST METHOD PROCEDURE REQUIREMENTS
No visual damage
<General purpose series>
∆C/C
Class2:
Y5V: ±20%
<High Capacitance series>
∆C/C
Class2:
Y5V: ±20%
Rapid change
of
temperature
IEC 60384-
21/22
4.11 Preconditioning;
150 +0/–10 °C for 1 hour, then keep for
24 ±1 hours at room temperature
5 cycles with following detail:
30 minutes at lower category temperature
30 minutes at upper category temperature
Recovery time 24 ±2 hours
D.F. meet initial specified value
Rins meet initial specified value
No visual damage after recovery
Damp heat
with Ur load
4.13 1. Preconditioning, class 2 only:
150 +0/-10 °C /1 hour, then keep for
24 ±1 hour at room temp
2. Initial measure:
Spec: refer initial spec C, D, IR
3. Damp heat test:
500 ±12 hours at 40 ±2 °C;
90 to 95% R.H. 1.0 Ur applied
4. Recovery:
Class 2: 24 ±2 hours
5. Final measure: C, D, IR
P.S. If the capacitance value is less than the
minimum value permitted, then after the other
measurements have been made the capacitor shall
be precondition according to “IEC 60384 4.1” and
then the requirement shall be met.
<General purpose series>
∆C/C
Class2:
Y5V: ±30%
D.F.
Class2:
Y5V: ≤ 15%
Rins
Class2:
Y5V: ≥ 500 MΩ or Rins x Cr ≥ 25s
whichever is less
<High Capacitance series>
∆C/C
Class2:
Y5V: ±30%
D.F.
Class2:
Y5V: 2 x initial value max
Rins
Class2:
Y5V: 500 MΩ or Rins x Cr ≥ 25s
whichever is less
www.yageo.com
J
ul 29, 2010 V.5
General Purpose & High Cap.
6.3 V to 50 V
Surface-Mount Ceramic Multilayer Capacitors
13
14
Product specification
Y5V
TEST TEST METHOD PROCEDURE REQUIREMENTS
No visual damage
Endurance IEC 60384-
21/22
4.14 1. Preconditioning, class 2 only:
150 +0/-10 °C /1 hour, then keep for
24 ±1 hour at room temp
2. Initial measure:
Spec: refer initial spec C, D, IR
3. Endurance test:
Temperature: Y5V: 85 °C
Specified stress voltage applied for 1,000 hours:
Applied 2.0 x Ur for general product.
Applied 1.5 x Ur for high cap. product.
4. Recovery time: 24 ±2 hours
5. Final measure: C, D, IR
P.S. If the capacitance value is less than the minimum
value permitted, then after the other measurements
have been made the capacitor shall be precondition
according to “IEC 60384 4.1” and then the
requirement shall be met.
<General purpose series>
∆C/C
Class2:
Y5V: ±30%
D.F.
Class2:
Y5V: ≤ 15%
Rins
Class2:
Y5V: ≥ 1,000 MΩ or Rins x Cr ≥ 50s
whichever is less
<High Capacitance series>
∆C/C
Class 2:
Y5V: ±30%
D.F.
Class 2:
Y5V: 2 x initial value max
Rins
Class 2:
Y5V: 1,000 MΩ or Rins x Cr ≥ 50s
whichever is less
Voltage proof IEC 60384-1 4.6 Specified stress voltage applied for 1 minute
Ur ≤ 100 V: series applied 2.5 Ur
100 V < Ur ≤ 200 V series applied (1.5 Ur + 100)
200 V < Ur ≤ 500 V series applied (1.3 Ur + 100)
Ur > 500 V: 1.3 Ur
I: 7.5 mA
No breakdown or flashover
www.yageo.com
J
ul 29, 2010 V.5
General Purpose & High Cap.
6.3 V to 50 V
Surface-Mount Ceramic Multilayer Capacitors
14
14
Product specification
Y5V
REVISION HISTORY
REVISION DATE CHANGE NOTIFICATION DESCRIPTION
Version 5 Jul 29, 2010 - - Modify the last 2-digit of 12NC
Version 4 Jun 24, 2010 - - Dimension on 1206 case size updated
Version 3 Apr 22, 2010 - - Dimension updated
Version 2 Feb 04, 2010 - - The statement of "Halogen Free" on the cover added
Version 1 Nov 04, 2009 - - Ordering code updated
- Dimension updated
Version 0 Apr 15, 2009 - - New datasheet for general purpose and high capacitance Y5V series with
RoHS compliant
- Replace the "6.3V to 50V" part of pdf files: Y5V_6.3V_10V_9_Preliminary,
Y5V_10V-to-50V_10_Preliminary, Y5V_16V_25V_50V_11
- Combine 0201 from pdf files: UP-NP0X5RX7RY5V_0201_6.3-to-50V_2
and UY-NPOX5RX7RY5V_0201_6.3-to-50V_2
- Define global part number
- Description of "Halogen Free compliant" added
- Test method and procedure updated