DESCRIPTION
Tyco Electronics’ new MINIPAK HDL
connector combines a high density
power interface into a blind-mateable
board-to-board connector, which stands
only 8mm off the edge of the printed
circuit board.
The MINIPAK HDL product consists of a
right angle plug and a right angle receptacle,
which utilizes an eye of the needle tail
that can be used in both solder and
press-fit applications. The contact offers
a current rating of 16 amps, low contact
resistance, and mating forces less than
0.3 pounds per contact.
The connector is designed and manufac-
tured to be mass-customizable, allowing
the customer to select a wide array of
configurations and layouts. MINIPAK HDL
connectors also contain three levels of
mating sequences.
This product is designed specifically for
modular hot-swappable power distribution
systems. The MINIPAK HDL connector
offers 20% more current density in a
smaller package than other products
currently offered in the market.
APPLICATIONS
• 1U servers
• High End Servers
• Telecommunications Switches requiring
low profile
• Hot Pluggable Power Supplies
KEY FEATURES
• High Density, low profile, power/signal,
blind-mate connector
• Developed to meet next generation 1u
application by reducing airflow impedance
• Design is customizable
• Serves both solder reflow and press fit
applications with the same contact
FOR MORE INFORMATION
Technical Support
Internet: http://www.tycoelectronics.com
USA: 1-800-522-6752
Canada: 1-905-470-4425
UK: 44-141-810-8967
Japan: 81-44-844-8013
MINIPAK HDL Connectors
TECHNICAL DOCUMENTS
Product Specification: 108-2325
Application Specification: 114-13215
MINIPAK HDL Connectors
2
• Maximum operating temperature - 120º C
• Current Rating - 16 amps
MECHANICAL
SPECIFICATIONS
PRODUCT DIMENSIONS
• Gatherability - +/- 2mm
• Mating forces of 1 1/2 N max per
power contact
• Single piece molded housing for best
strength and alignment
The connector configuration is described
by reading left to right on the plug and
right to left on the receptacle.
For example, the connector shown would
be described 25SX10P
A wide variety of additional configurations
can be produced due to the modular
design of the product. Some popular
configurations are shown here.
• Durability - 250 mating cycles
• Wipe - min of 2.5mm on shortest signal
• 3 levels of sequencing
PART NUMBERS
Configuration Right Angle Plug Right Angle Receptacle
25S/10P 2-1926732-5 2-1926733-5
25S16P 4-1926732-6 4-1926733-6
6p/15s/6p 1-1926720-6 1-1926721-6
8P/25S/8P 2-1926720-5 2-1926721-5
Note: Part Numbers are RoHS compliant.
MINIPAK HDL Connectors
3
Disclaimer
While Tyco Electronics Corporation and its affiliates referenced herein (“Tyco Electronics”) have made every reasonable effort to
ensure the accuracy of the information in this catalog, Tyco Electronics does not guarantee that it is error free, nor does
Tyco Electronics make any other representation, warranty or guarantee that the information is accurate, correct reliable or current.
Tyco Electronics reserves the right to make any adjustments to the information contained herein at any time without notice.
Tyco Electronics expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to,
any implied warranties of merchantability or fitness for a particular purpose. Tyco Electronics’ only obligations are those in the
Tyco Electronics Standard Terms and Conditions of Sale, and in no case will Tyco Electronics be responsible for any incidental,
indirect, or consequential damages arising from the sale, resale, or misuse of its products. Users should independently evaluate
the suitability of, and test each product for, their application.
8-1773448-5-CC&CE-PDF-11-07 © 2007 by Tyco Electronics Corporation. All Rights Reserved.
MINIPAK, TE logo and TYCO ELECTRONICS are trademarks.
Other Products, logos, and company names
mentioned herein may be trademarks of their respective owners.
Restriction on the use of Hazardous Substances (RoHS)
At Tyco Electronics, we’re ready to support your RoHS
requirements. We’ve assessed more than 1.5 million end
items/components for RoHS compliance, and issued new
part numbers where any change was required to eliminate
the restricted materials. Part numbers in this catalog are
identified as:
RoHS Compliant — Part numbers in this catalog are RoHS
Compliant, unless marked otherwise. These products comply
with European Union Directive 2002/95/EC as amended 1
January 2006 that restricts the use of lead, mercury, cadmium,
hexavalent chromium, PBB, and PBDE in certain electrical and
electronic products sold into the EU as of 1 July 2006.
NOTE: For purposes of this Catalog, included within the
definition of RoHS Compliant are products that are clearly
“Out of Scope” of the RoHS Directive such as hand tools and
other non-electrical accessories.
NOTE: Information regarding RoHS compliance is provided
based on reasonable inquiry of our suppliers and represents
our current actual knowledge based on the information
provided by our suppliers. This information is subject to
change. For latest compliance status, refer to our website
referenced at right.
Getting the Information You Need
Our comprehensive on-line RoHS Customer Support Center
provides a forum to answer your questions and support your
RoHS needs. A RoHS FAQ (Frequently Asked Questions) is
available with links to more detailed information. You can also
submit RoHS questions and receive a response within 24
hours during a normal work week.
The Support Center also provides:
• Cross-Reference from Non-compliant to
Compliant Products
• Ability to browse RoHS Compliant
Products in our on-line catalog
• Downloadable Technical Data
Customer
Information Presentation
• More detailed information regarding
the definitions used above
• So whatever your questions when it comes to RoHS, we’ve
got the answers at www.tycoelectronics.com/leadfree
