150 Series Metallized Polyester / Axial Leads Dissipation Factor (DF) tg x 10-4 at +25 C 5 C KHz 1 10 100 Max Value Typical Value C0.1F 80 150 250 SPECIFICATIONS Operating Temperature: -55 C to +125 C with voltage derating above 85 C Voltage Range: 63 VDC to 1000 VDC Capacitance Range: 0.001 F to 10 F Capacitance Tolerance: 5%, 10%, 20% Total Self Inductance (L): 1nH maximum per 1mm lead and capacitor length Dielectric Withstand Voltage: 1.6 x Rated Voltage for 2 sec at +25 C 5 C CECC Approval: Detail Specification 30401-021 Excellent choice for general purpose applications such as blocking, bypass, decoupling, smoothing and some timing, energy storage/discharge and arc suppression. Test Method and Performance Insulation Resistance 0.1FC1F 80 150 -- Test Conditions Temperature Voltage Charge Time Voltage Charge C1F 100 -- -- Maximum Pulse Rise Time dv/dt and Pulse Characteristic (Wo) 25C 5C 1 minute 50 VDC for Vn 100 VDC 100 VDC for Vn 100 VDC Performance For Vn 100 VDC 30,000 M for C 0.33F 10,000 M x F for C 0.33F 10,000 M for C 0.1F 1,000 M x F for C 0.1F For Vn 100 VDC L max Vn .GENERAL 16.5 19-20.5 26.5-28 31.5-33 4 2 1.5 1 dv/dt (V/sec) 504 252 189 126 Wo (V2/sec) 5 3 2 1 dv/dt (V/sec) 1,000 600 400 300 Wo (V2/sec) 10 7 4 2.5 dv/dt (V/sec) 5,000 3,500 2,000 1,250 Wo (V2/sec) 13.5 10 6.5 4 dv/dt (V/sec) 10,800 8,000 5,200 3,200 Wo (V2/sec) 20 15 10 6 dv/dt (V/sec) 25,200 18,900 12,600 7,560 Wo (V2/sec) Damp Heat Test 50-63 100 250 400 630 If the working voltage (V) is less than the nominal voltage (Vn), the capacitor can work at higher dv/dt. In this case, the maximum value allowed is obtained by multiplying the above value (See table dv/dt) with the ratio Vn/V. The pulse characteristic (Wo) is a function of the peak-to-peak voltage and may not exceed the value given in the above table. Tape and Reel Specifications^ L Max (Body Length) Lead Spacing Distance Between Reel Flanges Class Inches mm Inches mm Inches mm .433 11 2.06 52.4 3.0 75 1 .551 - .808 1.03 14 - 20.5 26 2.5 2.87 63.6 73 3.4 3.7 86 95 2 3 Test Conditions Temperature Relative Humidity Test Duration Performance Capacitance Change C/C DF Change tg Insulation Resistance +40C 95% 21 days 5% 50 x 104 at 1kHz 50% of limit value Life Test Test Conditions Temperature Test Duration Voltage Applied Performance Capacitance ChangeC/C DF Change tg +85C 1000 hrs 1.25 x Vn 5% 30 x 10-4 at 10kHz for C 1F 20 x 10-4 at 1kHz for C 1F 50% of limit value Insulation Resistance Soldering Test Conditions Soldering Temperature Soldering Duration Performance Capacitance Change C/C DF Change tg 260C 5C 10 sec 1 sec 2% 30 x 10-4 at 10kHz for C 1F 20 x 10-4 at 1kHz for C 1F 50% of limit value Insulation Resistance Long Term Stability (after two years) Storage Standard Environmental Conditions Performance Capacitance Change C/C 3% ^ Add class number (1, 2, or 3) to Catalog Number to indicate tape and reel Diameter Inches mm Quantity per Reel .197 .236 thru .256 .276 .315 thru .346 .354 thru .413 .433 thru .512 .551 thru .571 .571 5 6.0 thru 6.5 7 8 thru 8.5 9 thru 10.5 11 thru 13 14 thru 14.5 14.5 3,000 1,200 1,100 800 500 300 200 Not available d .002 (0.05mm) 1.58 0.2 (40 5mm) L Max 1.58 0.2 (40 5mm) Mallory Products for CDE/6325 Digital Way/Indianapolis IN 46278/Phone: (317)275-2285/Fax: (317)275-2293/www.cornell-dubilier.com D Max 193 Film Capacitors Low Leakage Non-Polar Axial Leads Lead Material - Tinned Copper Wire (Min. Lead content 5%) Available Tape and Reel Tape Wrapped with Epoxy End Fill Non Inductively Wound Flame Retardant Polyester Wrap Meets UL510 Epoxy End Fill Meets UL94V-0 150 Series Metallized Polyester / Axial Leads Film Capacitors Catalog Number Cap F Inches D Max Millimeters L Max d D Max L Max d .024 .024 .024 .024 .024 .024 .024 .024 .024 .031 .031 .031 .031 .031 .031 .031 .031 5.0 5.0 6.0 6.0 6.0 6.5 7.0 7.0 7.0 8.0 8.0 9.5 9.5 11.0 12.5 14.5 15.5 11.0 11.0 16.5 16.5 16.5 16.5 16.5 16.5 20.5 20.5 20.5 20.5 28.0 28.0 28.0 33.0 33.0 .6 .6 .6 .6 .6 .6 .6 .6 .6 .8 .8 .8 .8 .8 .8 .8 .8 .024 .024 .024 .024 .024 .024 .024 .024 .031 .031 .031 .031 .031 .031 .031 .031 .031 .031 .031 .031 .031 5.0 5.0 5.0 6.0 6.0 6.5 6.5 6.5 8.0 8.0 7.0 8.0 8.5 9.5 10.0 10.0 11.5 13.5 15.0 17.5 20.5 11.0 11.0 11.0 16.5 16.5 16.5 16.5 16.5 16.5 16.5 20.5 20.5 20.5 20.5 20.5 28.0 28.0 28.0 33.0 33.0 33.0 .6 .6 .6 .6 .6 .6 .6 .6 .8 .8 .8 .8 .8 .8 .8 .8 .8 .8 .8 .8 .8 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 6.0 6.0 6.5 7.0 8.0 8.0 8.5 8.0 8.5 9.0 9.5 10.0 9.0 9.5 10.5 12.5 13.5 15.5 18.5 21.5 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 16.5 16.5 16.5 16.5 16.5 16.5 16.5 20.5 20.5 20.5 20.5 20.5 28.0 28.0 28.0 28.0 33.0 33.0 33.0 33.0 .6 .6 .6 .6 .6 .6 .6 .6 .6 .6 .6 .6 .6 .8 .8 .8 .8 .8 .8 .8 .8 .8 .8 .8 .8 .8 .8 .8 .8 Catalog Number Cap F 150822*400AA^ 150103*400AA^ 150123*400AA^ 150153*400BB^ 150183*400BB^ 150223*400BB^ 150273*400BB^ 150333*400BB^ 150393*400CB^ 150473*400DB^ 150563*400EB^ 150683*400DC^ 150823*400EC^ 150104*400EC^ 150124*400EC^ 150154*400GC^ 150184*400EE^ 150224*400FE^ 150274*400GE^ 150334*400IE^ 150394*400JE^ 150474*400LF^ 150564*400LF^ 150684*400MF^ 150824*400PF^ 150105*400QF^ 150155*400WF^ 150225*400YF^ .0082 .01 .012 .015 .018 .022 .027 .033 .039 .047 .056 .068 .082 .10 .12 .15 .18 .22 .27 .33 .39 .47 .56 .68 .82 1.0 1.5 2.2 63 VDC/40 VAC 150154*63AA^ 150184*63AA^ 150224*63BB^ 150274*63BB^ 150334*63BB^ 150394*63CB^ 150474*63DB^ 150564*63DB^ 150684*63DC^ 150824*63EC^ 150105*63EC^ 150155*63HC^ 150225*63HE^ 150335*63KE^ 150475*63ME^ 150685*63QF^ 150106*63TF^ .15 .18 .22 .27 .33 .39 .47 .56 .68 .82 1.0 1.5 2.2 3.3 4.7 6.8 10.0 150683*100AA^ 150823*100AA^ 150104*100AA^ 150124*100BB^ 150154*100BB^ 150184*100CB^ 150224*100CB^ 150274*100CB^ 150334*100EB^ 150394*100EB^ 150474*100DC^ 150564*100EC^ 150684*100FC^ 150824*100HC^ 150105*100IC^ 150155*100IE^ 150225*100LE^ 150335*100PE^ 150475*100RF^ 150685*100WF^ 150106*100YF^ .068 .082 .1 .12 .15 .18 .22 .27 .33 .39 .47 .56 .68 .82 1.0 1.5 2.2 3.3 4.7 6.8 10.0 .197 .197 .236 .236 .236 .256 .276 .276 .276 .315 .315 .374 .374 .433 .492 .571 .610 .433 .433 .650 .650 .650 .650 .650 .650 .807 .807 .807 .807 1.102 1.102 1.102 1.299 1.299 .433 .433 .433 .650 .650 .650 .650 .650 .650 .650 .807 .807 .807 .807 .807 1.102 1.102 1.102 1.299 1.299 1.299 250 VDC/160 VAC 150123*250AA^ 150153*250AA^ 150183*250AA^ 150223*250AA^ 150273*250AA^ 150333*250AA^ 150393*250AA^ 150473*250AA^ 150563*250AA^ 150683*250BB^ 150823*250BB^ 150104*250CB^ 150124*250DB^ 150154*250EB^ 150184*250EB^ 150224*250FB^ 150274*250EC^ 150334*250FC^ 150394*250GC^ 150474*250HC^ 150564*250IC^ 150684*250GE^ 150824*250HE^ 150105*250JE^ 150155*250ME^ 150225*250PF^ 150335*250TF^ 150475*250XF^ 150685*250ZF^ 194 .012 .015 .018 .022 .027 .033 .039 .047 .056 .068 .082 .10 .12 .15 .18 .22 .27 .33 .39 .47 .56 .68 .82 1.0 1.5 2.2 3.3 4.7 6.8 .197 .197 .197 .197 .197 .197 .197 .197 .197 .236 .236 .256 .276 .315 .315 .335 .315 .335 .354 .374 .394 .354 .374 .413 .492 .531 .610 .728 .845 .433 .433 .433 .433 .433 .433 .433 .433 .433 .650 .650 .650 .650 .650 .650 .650 .807 .807 .807 .807 .807 1.102 1.102 1.102 1.102 1.299 1.299 1.299 1.299 Millimeters L Max d D Max L Max d .024 .024 .024 .024 .024 .024 .024 .024 .024 .024 .024 .024 .031 .031 .031 .031 .031 .031 .031 .031 .031 .031 .031 .031 .031 .031 .031 .031 5.0 5.0 5.0 6.0 6.0 6.0 6.0 6.0 6.5 7.0 8.0 7.0 8.0 8.0 8.0 9.0 8.0 8.5 9.0 10.0 10.5 11.5 11.5 12.5 13.5 14.5 17.5 20.5 11.0 11.0 11.0 16.5 16.5 16.5 16.5 16.5 16.5 16.5 16.5 20.5 20.5 20.5 20.5 20.5 28.0 28.0 28.0 28.0 28.0 33.0 33.0 33.0 33.0 33.0 33.0 33.0 .6 .6 .6 .6 .6 .6 .6 .6 .6 .6 .6 .6 .8 .8 .8 .8 .8 .8 .8 .8 .8 .8 .8 .8 .8 .8 .8 .8 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 6.0 6.0 6.0 6.0 6.5 7.0 6.5 8.0 8.0 8.0 8.5 9.0 9.5 8.5 9.0 10.0 10.5 11.5 12.5 13.0 14.5 15.0 15.5 17.5 18.5 20.5 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 16.5 16.5 16.5 16.5 16.5 16.5 20.5 20.5 20.5 20.5 20.5 20.5 20.5 28.0 28.0 28.0 28.0 28.0 28.0 33.0 33.0 33.0 33.0 33.0 33.0 33.0 .6 .6 .6 .6 .6 .6 .6 .6 .6 .6 .6 .6 .6 .6 .6 .6 .6 .6 .8 .8 .8 .8 .8 .8 .8 .8 .8 .8 .8 .8 .8 .8 .8 .8 .8 .8 .8 400 VDC/200 VAC 100 VDC/63 VAC .197 .197 .197 .236 .236 .256 .256 .256 .315 .315 .276 .315 .335 .374 .394 .394 .453 .531 .591 .689 .807 Inches D Max .024 .024 .024 .024 .024 .024 .024 .024 .024 .024 .024 .024 .024 .031 .031 .031 .031 .031 .031 .031 .031 .031 .031 .031 .031 .031 .031 .031 .031 .197 .197 .197 .236 .236 .236 .236 .236 .256 .276 .315 .276 .315 .315 .315 .354 .315 .335 .354 .394 .413 .453 .453 .492 .531 .571 .689 .807 .433 .433 .433 .650 .650 .650 .650 .650 .650 .650 .650 .807 .807 .807 .807 .807 1.102 1.102 1.102 1.102 1.102 1.299 1.299 1.299 1.299 1.299 1.299 1.299 630 VDC/220 VAC 150102*630AA^ 150122*630AA^ 150152*630AA^ 150182*630AA^ 150222*630AA^ 150272*630AA^ 150332*630AA^ 150392*630AA^ 150472*630AA^ 150562*630AA^ 150682*630AA^ 150822*630BB^ 150103*630BB^ 150123*630BB^ 150153*630BB^ 150183*630CB^ 150223*630DB^ 150273*630CC^ 150333*630EC^ 150393*630EC^ 150473*630EC^ 150563*630FC^ 150683*630GC^ 150823*630HC^ 150104*630FE^ 150124*630GE^ 150154*630IE^ 150184*630JE^ 150224*630LE^ 150274*630ME^ 150334*630NF^ 150394*630QF^ 150474*630RF^ 150564*630TF^ 150684*630WF^ 150824*630XF^ 150105*630YF^ .001 .0012 .0015 .0018 .0022 .0027 .0033 .0039 .0047 .0056 .0068 .0082 .01 .012 .015 .018 .022 .027 .033 .039 .047 .056 .068 .082 .10 .12 .15 .18 .22 .27 .33 .39 .47 .56 .68 .82 1.0 .197 .197 .197 .197 .197 .197 .197 .197 .197 .197 .197 .236 .236 .236 .236 .256 .276 .256 .315 .315 .315 .335 .354 .374 .335 .354 .394 .413 .453 .492 .512 .571 .591 .610 .689 .728 .807 .433 .433 .433 .433 .433 .433 .433 .433 .433 .433 .433 .650 .650 .650 .650 .650 .650 .807 .807 .807 .807 .807 .807 .807 1.102 1.102 1.102 1.102 1.102 1.102 1.299 1.299 1.299 1.299 1.299 1.299 1.299 .024 .024 .024 .024 .024 .024 .024 .024 .024 .024 .024 .024 .024 .024 .024 .024 .024 .024 .031 .031 .031 .031 .031 .031 .031 .031 .031 .031 .031 .031 .031 .031 .031 .031 .031 .031 .031 * Indicate capacitance tolerance J = 5% K = 10% ^ If ordering Tape & Reel, insert 1, 2, or 3 M = 20% (See page 194 to determine which class applies) Mallory Products for CDE/6325 Digital Way/Indianapolis IN 46278/Phone: (317)275-2285/Fax: (317)275-2293/www.cornell-dubilier.com 150 Series Metallized Polyester / Axial Leads Cap F 150102*1000CB^ 150152*1000CB^ 150222*1000CB^ 150332*1000CB^ 150472*1000DB^ 150682*1000EB^ 150103*1000DC^ 150153*1000FC^ 150223*1000HC^ .001 .0015 .0022 .0033 .0047 .0068 .01 .015 .022 Inches D Max L Max Millimeters d D Max L Max d 6.5 6.5 6.5 6.5 7.0 8.0 7.0 8.5 9.5 16.5 16.5 16.5 16.5 16.5 16.5 20.5 20.5 20.5 .8 .8 .8 .8 .8 .8 .8 .8 .8 Catalog Number 1000 VDC/250 VAC .256 .256 .256 .256 .276 .315 .276 .335 .374 .650 .650 .650 .650 .650 .650 .807 .807 .807 .031 .031 .031 .031 .031 .031 .031 .031 .031 Cap F Inches D Max L Max Millimeters d D Max L Max d 8.5 9.5 11.0 13.0 14.0 17.5 20.5 24.0 28.0 28.0 28.0 28.0 33.0 33.0 33.0 33.0 .8 .8 .8 .8 .8 .8 .8 .8 1000 VDC/250 VAC 150333*1000FE^ 150473*1000HE^ 150683*1000KE^ 150104*1000NE^ 150154*1000OF^ 150224*1000WF^ 150334*1000YF^ 150474*1000Z1F^ .033 .047 .068 .1 .15 .22 .33 .47 .335 .374 .433 .512 .551 .689 .807 .945 1.102 1.102 1.102 1.102 1.299 1.299 1.299 1.299 .031 .031 .031 .031 .031 .031 .031 .031 * Indicate capacitance tolerance J = 5% K = 10% ^ If ordering Tape & Reel, insert 1, 2, or 3 M = 20% (See page 194 to determine which class applies) Mallory Products for CDE/6325 Digital Way/Indianapolis IN 46278/Phone: (317)275-2285/Fax: (317)275-2293/www.cornell-dubilier.com 195 Film Capacitors Catalog Number