193
Mallory Products for CDE/6325 Digital Way/Indianapolis IN 46278/Phone: (317)275-2285/Fax: (317)275-2293/www.cornell-dubilier.com
Film CapacitorsFilm Capacitors
Film CapacitorsFilm Capacitors
Film Capacitors
.
150 Series
Metallized Polyester / Axial Leads
Low Leakage
Non-Polar
Axial Leads
Lead Material - Tinned Copper
Wire (Min. Lead content 5%)
Available Tape and Reel
Tape Wrapped with Epoxy
End Fill
Non Inductively Wound
Flame Retardant Polyester
Wrap Meets UL510
Epoxy End Fill Meets UL94V-0
GENERAL
SPECIFICATIONS
Operating Temperature:
-55 C to +125 C with
voltage derating above 85 C
Voltage Range:
63 VDC to 1000 VDC
Capacitance Range:
0.001 F to 10 F
Capacitance Tolerance:
5%, 10%, 20%
Total Self Inductance (L):
1nH maximum per 1mm lead
and capacitor length
Insulation Resistance
Test Conditions
Temperature 25C 5C
Voltage Charge Time 1 minute
Voltage Charge 50 VDC for Vn 100 VDC
100 VDC for Vn 100 VDC
Performance
For Vn 100 VDC 30,000 M for C 0.33F
10,000 Mx F for C 0.33F
For Vn 100 VDC 10,000 M for C 0.1F
1,000 M x F for C 0.1F
Damp Heat Test
Test Conditions
Temperature +40C
Relative Humidity 95%
Test Duration 21 days
Performance
Capacitance ChangeC/C 5%
DF Changetg웃울 50 x 104 at 1kHz
Insulation Resistance 50% of limit value
Life Test
Test Conditions
Temperature +85C
Test Duration 1000 hrs
Voltage Applied 1.25 x Vn
Performance
Capacitance ChangeC/C 5%
DF Change tg웃울 30 x 10-4 at 10kHz for C 1F
20 x 10-4 at 1kHz for C 1F
Insulation Resistance 50% of limit value
Soldering
Test Conditions
Soldering Temperature 260C 5C
Soldering Duration 10 sec 1 sec
Performance
Capacitance Change C/C 울 앧 2%
DF Changetg웃울 30 x 10-4 at 10kHz for C 1F
20 x 10-4 at 1kHz for C 1F
Insulation Resistance 50% of limit value
Long Term Stability (after two years)
Storage Standard Environmental Conditions
Performance
Capacitance ChangeC/C 3%
Dissipation Factor (DF)
tg
x 10-4 at +25
C
5
C Test Method and Performance
KHz C0.1F0.1FC1µF C1F
Max Value 1 80 80 100
Typical 10 150 150
Value 100 250
Maximum Pulse Rise Time dv/dt and
Pulse Characteristic (Wo)
L max
Vn 16.5 19-20.5 26.5-28 31.5-33
4 2 1.5 1 dv/dt (V/sec)
50-63 504 252 189 126 Wo (V2/sec)
5 3 2 1 dv/dt (V/sec)
100 1,000 600 400 300 Wo (V2/sec)
10 7 4 2.5 dv/dt (V/sec)
250 5,000 3,500 2,000 1,250 Wo (V2/sec)
13.5 10 6.5 4 dv/dt (V/sec)
400 10,800 8,000 5,200 3,200 Wo (V2/sec)
20 15 10 6 dv/dt (V/sec)
630 25,200 18,900 12,600 7,560 Wo (V2/sec)
If the working voltage (V) is less than the nominal voltage (Vn), the capacitor can
work at higher dv/dt. In this case, the maximum value allowed is obtained by
multiplying the above value (See table dv/dt) with the ratio Vn/V.
The pulse characteristic (Wo) is a function of the peak-to-peak voltage
and may not exceed the value given in the above table.
Tape and Reel Specifications^
Inches mm Inches mm Inches mm
.433 11 2.06 52.4 3.0 75 1
.551 - .808 14 - 20.5 2.5 63.6 3.4 86 2
1.03 26 2.87 73 3.7 95 3
Distance Between
Reel Flanges
L Max
(Body Length) Lead Spacing
^ Add class number (1, 2, or 3) to Catalog Number to indicate tape and reel
Diameter
Inches mm Quantity per Reel
.197 5 3,000
.236 thru .256 6.0 thru 6.5 1,200
.276 7 1,100
.315 thru .346 8 thru 8.5 800
.354 thru .413 9 thru 10.5 500
.433 thru .512 11 thru 13 300
.551 thru .571 14 thru 14.5 200
.571 14.5 Not available
Dielectric Withstand Voltage:
1.6 x Rated Voltage for 2 sec at
+25 C 5 C
CECC Approval:
Detail Specification 30401-021
Excellent choice for general purpose
applications such as blocking, bypass,
decoupling, smoothing and some tim-
ing, energy storage/discharge and arc
suppression.
D
Max
1.58 0.2
(40 5mm) 1.58 0.2
(40 5mm)
d .002
(0.05mm)
L
Max
Class
194Mallory Products for CDE/6325 Digital Way/Indianapolis IN 46278/Phone: (317)275-2285/Fax: (317)275-2293/www.cornell-dubilier.com
Film CapacitorsFilm Capacitors
Film CapacitorsFilm Capacitors
Film Capacitors
150 Series
Metallized Polyester / Axial Leads
63 VDC/40 VAC
150154*63AA^ .15 .197 .433 .024 5.0 11.0 .6
150184*63AA^ .18 .197 .433 .024 5.0 11.0 .6
150224*63BB^ .22 .236 .650 .024 6.0 16.5 .6
150274*63BB^ .27 .236 .650 .024 6.0 16.5 .6
150334*63BB^ .33 .236 .650 .024 6.0 16.5 .6
150394*63CB^ .39 .256 .650 .024 6.5 16.5 .6
150474*63DB^ .47 .276 .650 .024 7.0 16.5 .6
150564*63DB^ .56 .276 .650 .024 7.0 16.5 .6
150684*63DC^ .68 .276 .807 .024 7.0 20.5 .6
150824*63EC^ .82 .315 .807 .031 8.0 20.5 .8
150105*63EC^ 1.0 .315 .807 .031 8.0 20.5 .8
150155*63HC^ 1.5 .374 .807 .031 9.5 20.5 .8
150225*63HE^ 2.2 .374 1.102 .031 9.5 28.0 .8
150335*63KE^ 3.3 .433 1.102 .031 11.0 28.0 .8
150475*63ME^ 4.7 .492 1.102 .031 12.5 28.0 .8
150685*63QF^ 6.8 .571 1.299 .031 14.5 33.0 .8
150106*63TF^ 10.0 .610 1.299 .031 15.5 33.0 .8
100 VDC/63 VAC
150683*100AA^ .068 .197 .433 .024 5.0 11.0 .6
150823*100AA^ .082 .197 .433 .024 5.0 11.0 .6
150104*100AA^ .1 .197 .433 .024 5.0 11.0 .6
150124*100BB^ .12 .236 .650 .024 6.0 16.5 .6
150154*100BB^ .15 .236 .650 .024 6.0 16.5 .6
150184*100CB^ .18 .256 .650 .024 6.5 16.5 .6
150224*100CB^ .22 .256 .650 .024 6.5 16.5 .6
150274*100CB^ .27 .256 .650 .024 6.5 16.5 .6
150334*100EB^ .33 .315 .650 .031 8.0 16.5 .8
150394*100EB^ .39 .315 .650 .031 8.0 16.5 .8
150474*100DC^ .47 .276 .807 .031 7.0 20.5 .8
150564*100EC^ .56 .315 .807 .031 8.0 20.5 .8
150684*100FC^ .68 .335 .807 .031 8.5 20.5 .8
150824*100HC^ .82 .374 .807 .031 9.5 20.5 .8
150105*100IC^ 1.0 .394 .807 .031 10.0 20.5 .8
150155*100IE^ 1.5 .394 1.102 .031 10.0 28.0 .8
150225*100LE^ 2.2 .453 1.102 .031 11.5 28.0 .8
150335*100PE^ 3.3 .531 1.102 .031 13.5 28.0 .8
150475*100RF^ 4.7 .591 1.299 .031 15.0 33.0 .8
150685*100WF^ 6.8 .689 1.299 .031 17.5 33.0 .8
150106*100YF^ 10.0 .807 1.299 .031 20.5 33.0 .8
250 VDC/160 VAC
150123*250AA^ .012 .197 .433 .024 5.0 11.0 .6
150153*250AA^ .015 .197 .433 .024 5.0 11.0 .6
150183*250AA^ .018 .197 .433 .024 5.0 11.0 .6
150223*250AA^ .022 .197 .433 .024 5.0 11.0 .6
150273*250AA^ .027 .197 .433 .024 5.0 11.0 .6
150333*250AA^ .033 .197 .433 .024 5.0 11.0 .6
150393*250AA^ .039 .197 .433 .024 5.0 11.0 .6
150473*250AA^ .047 .197 .433 .024 5.0 11.0 .6
150563*250AA^ .056 .197 .433 .024 5.0 11.0 .6
150683*250BB^ .068 .236 .650 .024 6.0 16.5 .6
150823*250BB^ .082 .236 .650 .024 6.0 16.5 .6
150104*250CB^ .10 .256 .650 .024 6.5 16.5 .6
150124*250DB^ .12 .276 .650 .024 7.0 16.5 .6
150154*250EB^ .15 .315 .650 .031 8.0 16.5 .8
150184*250EB^ .18 .315 .650 .031 8.0 16.5 .8
150224*250FB^ .22 .335 .650 .031 8.5 16.5 .8
150274*250EC^ .27 .315 .807 .031 8.0 20.5 .8
150334*250FC^ .33 .335 .807 .031 8.5 20.5 .8
150394*250GC^ .39 .354 .807 .031 9.0 20.5 .8
150474*250HC^ .47 .374 .807 .031 9.5 20.5 .8
150564*250IC^ .56 .394 .807 .031 10.0 20.5 .8
150684*250GE^ .68 .354 1.102 .031 9.0 28.0 .8
150824*250HE^ .82 .374 1.102 .031 9.5 28.0 .8
150105*250JE^ 1.0 .413 1.102 .031 10.5 28.0 .8
150155*250ME^ 1.5 .492 1.102 .031 12.5 28.0 .8
150225*250PF^ 2.2 .531 1.299 .031 13.5 33.0 .8
150335*250TF^ 3.3 .610 1.299 .031 15.5 33.0 .8
150475*250XF^ 4.7 .728 1.299 .031 18.5 33.0 .8
150685*250ZF^ 6.8 .845 1.299 .031 21.5 33.0 .8
400 VDC/200 VAC
150822*400AA^ .0082 .197 .433 .024 5.0 11.0 .6
150103*400AA^ .01 .197 .433 .024 5.0 11.0 .6
150123*400AA^ .012 .197 .433 .024 5.0 11.0 .6
150153*400BB^ .015 .236 .650 .024 6.0 16.5 .6
150183*400BB^ .018 .236 .650 .024 6.0 16.5 .6
150223*400BB^ .022 .236 .650 .024 6.0 16.5 .6
150273*400BB^ .027 .236 .650 .024 6.0 16.5 .6
150333*400BB^ .033 .236 .650 .024 6.0 16.5 .6
150393*400CB^ .039 .256 .650 .024 6.5 16.5 .6
150473*400DB^ .047 .276 .650 .024 7.0 16.5 .6
150563*400EB^ .056 .315 .650 .024 8.0 16.5 .6
150683*400DC^ .068 .276 .807 .024 7.0 20.5 .6
150823*400EC^ .082 .315 .807 .031 8.0 20.5 .8
150104*400EC^ .10 .315 .807 .031 8.0 20.5 .8
150124*400EC^ .12 .315 .807 .031 8.0 20.5 .8
150154*400GC^ .15 .354 .807 .031 9.0 20.5 .8
150184*400EE^ .18 .315 1.102 .031 8.0 28.0 .8
150224*400FE^ .22 .335 1.102 .031 8.5 28.0 .8
150274*400GE^ .27 .354 1.102 .031 9.0 28.0 .8
150334*400IE^ .33 .394 1.102 .031 10.0 28.0 .8
150394*400JE^ .39 .413 1.102 .031 10.5 28.0 .8
150474*400LF^ .47 .453 1.299 .031 11.5 33.0 .8
150564*400LF^ .56 .453 1.299 .031 11.5 33.0 .8
150684*400MF^ .68 .492 1.299 .031 12.5 33.0 .8
150824*400PF^ .82 .531 1.299 .031 13.5 33.0 .8
150105*400QF^ 1.0 .571 1.299 .031 14.5 33.0 .8
150155*400WF^ 1.5 .689 1.299 .031 17.5 33.0 .8
150225*400YF^ 2.2 .807 1.299 .031 20.5 33.0 .8
630 VDC/220 VAC
150102*630AA^ .001 .197 .433 .024 5.0 11.0 .6
150122*630AA^ .0012 .197 .433 .024 5.0 11.0 .6
150152*630AA^ .0015 .197 .433 .024 5.0 11.0 .6
150182*630AA^ .0018 .197 .433 .024 5.0 11.0 .6
150222*630AA^ .0022 .197 .433 .024 5.0 11.0 .6
150272*630AA^ .0027 .197 .433 .024 5.0 11.0 .6
150332*630AA^ .0033 .197 .433 .024 5.0 11.0 .6
150392*630AA^ .0039 .197 .433 .024 5.0 11.0 .6
150472*630AA^ .0047 .197 .433 .024 5.0 11.0 .6
150562*630AA^ .0056 .197 .433 .024 5.0 11.0 .6
150682*630AA^ .0068 .197 .433 .024 5.0 11.0 .6
150822*630BB^ .0082 .236 .650 .024 6.0 16.5 .6
150103*630BB^ .01 .236 .650 .024 6.0 16.5 .6
150123*630BB^ .012 .236 .650 .024 6.0 16.5 .6
150153*630BB^ .015 .236 .650 .024 6.0 16.5 .6
150183*630CB^ .018 .256 .650 .024 6.5 16.5 .6
150223*630DB^ .022 .276 .650 .024 7.0 16.5 .6
150273*630CC^ .027 .256 .807 .024 6.5 20.5 .6
150333*630EC^ .033 .315 .807 .031 8.0 20.5 .8
150393*630EC^ .039 .315 .807 .031 8.0 20.5 .8
150473*630EC^ .047 .315 .807 .031 8.0 20.5 .8
150563*630FC^ .056 .335 .807 .031 8.5 20.5 .8
150683*630GC^ .068 .354 .807 .031 9.0 20.5 .8
150823*630HC^ .082 .374 .807 .031 9.5 20.5 .8
150104*630FE^ .10 .335 1.102 .031 8.5 28.0 .8
150124*630GE^ .12 .354 1.102 .031 9.0 28.0 .8
150154*630IE^ .15 .394 1.102 .031 10.0 28.0 .8
150184*630JE^ .18 .413 1.102 .031 10.5 28.0 .8
150224*630LE^ .22 .453 1.102 .031 11.5 28.0 .8
150274*630ME^ .27 .492 1.102 .031 12.5 28.0 .8
150334*630NF^ .33 .512 1.299 .031 13.0 33.0 .8
150394*630QF^ .39 .571 1.299 .031 14.5 33.0 .8
150474*630RF^ .47 .591 1.299 .031 15.0 33.0 .8
150564*630TF^ .56 .610 1.299 .031 15.5 33.0 .8
150684*630WF^ .68 .689 1.299 .031 17.5 33.0 .8
150824*630XF^ .82 .728 1.299 .031 18.5 33.0 .8
150105*630YF^ 1.0 .807 1.299 .031 20.5 33.0 .8
* Indicate capacitance tolerance
J = 5%
K = 10%
M = 20% ^ If ordering Tape & Reel, insert 1, 2, or 3
(See page 194 to determine which class applies)
Catalog
Number Millimeters
d
L
Max
D
Max
d
L
Max
D
Max
Inches
Cap
FCatalog
Number Millimeters
d
L
Max
D
Max
d
L
Max
D
Max
Inches
Cap
F
195
Mallory Products for CDE/6325 Digital Way/Indianapolis IN 46278/Phone: (317)275-2285/Fax: (317)275-2293/www.cornell-dubilier.com
Film CapacitorsFilm Capacitors
Film CapacitorsFilm Capacitors
Film Capacitors
150 Series
Metallized Polyester / Axial Leads
1000 VDC/250 VAC
150333*1000FE^ .033 .335 1.102 .031 8.5 28.0 .8
150473*1000HE^ .047 .374 1.102 .031 9.5 28.0 .8
150683*1000KE^ .068 .433 1.102 .031 11.0 28.0 .8
150104*1000NE^ .1 .512 1.102 .031 13.0 28.0 .8
150154*1000OF^ .15 .551 1.299 .031 14.0 33.0 .8
150224*1000WF^ .22 .689 1.299 .031 17.5 33.0 .8
150334*1000YF^ .33 .807 1.299 .031 20.5 33.0 .8
150474*1000Z1F^ .47 .945 1.299 .031 24.0 33.0 .8
1000 VDC/250 VAC
150102*1000CB^ .001 .256 .650 .031 6.5 16.5 .8
150152*1000CB^ .0015 .256 .650 .031 6.5 16.5 .8
150222*1000CB^ .0022 .256 .650 .031 6.5 16.5 .8
150332*1000CB^ .0033 .256 .650 .031 6.5 16.5 .8
150472*1000DB^ .0047 .276 .650 .031 7.0 16.5 .8
150682*1000EB^ .0068 .315 .650 .031 8.0 16.5 .8
150103*1000DC^ .01 .276 .807 .031 7.0 20.5 .8
150153*1000FC^ .015 .335 .807 .031 8.5 20.5 .8
150223*1000HC^ .022 .374 .807 .031 9.5 20.5 .8
* Indicate capacitance tolerance
J = 5%
K = 10%
M = 20% ^ If ordering Tape & Reel, insert 1, 2, or 3
(See page 194 to determine which class applies)
Catalog
Number Millimeters
d
L
Max
D
Max
d
L
Max
D
Max
Inches
Cap
FCatalog
Number Millimeters
d
L
Max
D
Max
d
L
Max
D
Max
Inches
Cap
F