VLIN2626-02G www.vishay.com Vishay Semiconductors Low Capacitance, Single-Line ESD-Protection Diode in SOD-323 FEATURES * For LIN-Bus applications * Small SOD-323 package 2 1 * 1-line ESD-protection * Working range: 26.5 V * Low leakage current IR < 0.05 A 20503 22756 SOD-323 * Low load capacitance CD < 16 pF * ESD-protection acc. IEC 61000-4-2 30 kV contact discharge 30 kV air discharge MARKING (example only) XYZ 1 * ESD capability according to AEC-Q101: human body model: class H3B: > 8 kV * e3 - pins plated with tin (Sn) XYZ = type code (see table below) bar = pin 1 * AEC-Q101 qualified available * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 ORDERING INFORMATION ENVIRONMENTAL AND QUALITY CODE PART NUMBER (EXAMPLE) AEC-Q101 QUALIFIED RoHS-COMPLIANT + LEAD (Pb)-FREE TERMINATIONS STANDARD GREEN PACKAGING CODE ORDERING CODE (EXAMPLE) 3K PER 7" REEL 10K PER 13" REEL TIN (8 mm TAPE) (8 mm TAPE) PLATED 15K/BOX = MOQ 10K/BOX = MOQ VLIN2626-02G - E - 3 -08 - VLIN2626-02G-E3-08 VLIN2626-02G H E - 3 -08 - VLIN2626-02GHE3-08 VLIN2626-02G - E - 3 - -18 VLIN2626-02G-E3-18 VLIN2626-02G H E - 3 - -18 VLIN2626-02GHE3-18 PACKAGE DATA DEVICE NAME PACKAGE NAME TYPE CODE WEIGHT MOLDING COMPOUND FLAMMABILITY RATING MOISTURE SENSITIVITY LEVEL SOLDERING CONDITIONS SOD-323 262 4.30 mg UL 94 V-0 MSL level 1 (according J-STD-020) Peak temperature max. 260 C VLIN2626-02G ABSOLUTE MAXIMUM RATINGS PARAMETER Peak pulse current Peak pulse power ESD immunity Operating temperature Storage temperature Rev. 1.1, 23-Feb-16 TEST CONDITIONS SYMBOL VALUE UNIT TA = 25 C; acc. IEC 61000-4-5; tp = 8/20 s; single shot IPPM 4 A TA = 25 C; acc. IEC 61000-4-5; tp = 8/20 s; single shot PPP Contact discharge acc. IEC 61000-4-2; 10 pulses; TA = 25 C Air discharge acc. IEC 61000-4-2; 10 pulses; TA = 25 C Junction temperature VESD 200 W 30 kV 30 kV TJ -55 to +150 C TSTG -55 to +150 C Document Number: 85915 1 For technical questions, contact: ESDprotection@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLIN2626-02G www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITIONS / REMARKS SYMBOL MIN. TYP. Number of lines which can be protected Nchannel - Max. reverse working voltage VRWM - Reverse voltage At IR = 0.05 A VR 26.5 - - V Reverse current At VRWM = 26.5 V IR - - 0.05 A At IR = 1 mA VBR 28 30 32 V Protection paths Reverse stand-off voltage Reverse breakdown voltage Reverse clamping voltage MAX. UNIT - 1 lines - 26.5 V At IPP 1 A; tp = 8/20 s VC - 32 40 V At IPP = IPPM = 4 A; tp = 8/20 s VC - 39 50 V At VR = 0 V, f = 1 MHz CD - 13.5 16 pF Capacitance TYPICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) Axis Title 16 10000 120 f = 1 MHz Rise time = 0.7 ns to 1 ns 14 100 12 1000 60 53 2nd line CD (pF) 10 1st line 2nd line 2nd line IESD (%) 80 8 6 100 40 4 27 20 2 0 0 10 -10 0 -30 10 20 30 40 50 60 70 80 90 100 t (ns) 2nd line 20557 -20 -10 10000 30 10000 35 8 s to 100 % 30 25 20 s to 50 % 40 2nd line VR (V) 1st line 2nd line 1000 20 TJ = 150 C 1000 100 C 1st line 2nd line 80 2nd line IPPM (%) 20 Axis Title Axis Title 60 10 Fig. 3 - Typical Capacitance CD vs. Reverse Voltage VR Fig. 1 - ESD Discharge Current Wave Form acc. IEC 61000-4-2 (330 / 150 pF) 100 0 VR (V) 2nd line 22807 75 C 15 25 C -40 C 100 100 10 20 5 0 0 0.01 10 0 10 20 30 40 t (s) 2nd line 20548 Fig. 2 - 8/20 s Peak Pulse Current Wave Form acc. IEC 61000-4-5 Rev. 1.1, 23-Feb-16 22808 0.1 1 10 100 1000 10 10 000 IR (A) 2nd line Fig. 4 - Typical Reverse Voltage VR vs. Reverse Current IR Document Number: 85915 2 For technical questions, contact: ESDprotection@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLIN2626-02G www.vishay.com Vishay Semiconductors Axis Title 60 45 10000 Transmission line pulse (TLP): tp = 100 ns 40 35 40 1000 20 100 25 20 1st line 2nd line 2nd line VC-TLP (V) 2nd line VC (V) 30 15 10 Measured according IEC 61000-4-5 (8/20 s - wave form) 5 0 0 0 1 2 3 4 IPP (A) 2nd line 22809 10 0 5 10 20 40 50 60 ITLP (A) 2nd line 22810 Fig. 5 - Typical Peak Clamping Voltage VC vs. Peak Pulse Current IPP 30 Fig. 6 - Typical Clamping Voltage VC-TLP vs. Pulse Current ITLP 0.1 [0.004] max. 0.15 [0.006] 0.10 [0.004] 0.2 [0.008] 0.8 [0.031] 1.15 [0.045] PACKAGE DIMENSIONS in millimeters (inches) SOD-323 0 -8 0.40 [0.016] 0.25 [0.010] 1.95 [0.077] 2.50 [0.098] 1.1 [0.043] 0.40 [0.016] 0.20 [0.008] 2.85 [0.112] 1.5 [0.059] 1.60 [0.063] Cathode bar Foot print recommendation: 0.6 [0.024] 0.6 [0.024] Document no.: S8-V-3910.02-001 (4) Created - Date: 24.August.2004 Rev. 5 - Date: 23.Sept.2009 22771 Rev. 1.1, 23-Feb-16 0.6 [0.024] 1.6 [0.063] Document Number: 85915 3 For technical questions, contact: ESDprotection@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VLIN2626-02G www.vishay.com Vishay Semiconductors CARRIER TAPE SOD-323 A 1.75 0.1 4 0.1 2 0.05 A-A Section 0.254 0.013 2.9 0.1 +0.3 8 -0.1 3.5 0.05 +0.1 O 1.5 0.0 +0.25 O 1 0.00 B B A 1.35 0.1 4 0.1 B-B Section 1.52 0.1 Document no.: S8-V-3717.07-002 (4) Created - Date: 09. Feb. 2010 22824 ORIENTATION IN CARRIER TAPE SOD-323 Unreeling direction Cathode Document no.: S8-V-3717.07-003 (4) Created - Date: 09. Feb. 2010 22772 Rev. 1.1, 23-Feb-16 Top view Document Number: 85915 4 For technical questions, contact: ESDprotection@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000