5962-9218001MRA(54ACQ573DMQB) - National Semiconductor

Original Creation Date: 07/01/96

Last Update Date: 09/11/96

Last Major Revision Date: 07/01/96

MN54ACQ573-X REV 1A0 MILITARY DATA SHEET

Octal D-Type Latch With TRI-State Outputs

General Description

The ACQ573 is a high speed octal latch with buffered common Latch Enable (LE) and buffered

common Output Enable (OE) inputs.

The 'ACQ' is functionally identical to the ACQ373 but with inputs and outputs on opposite

sides of the package.

The 'ACQ' utilizes NSC Quiet Series technology to guarantee quiet output switching and

improved dynamic threshold performance. FACT Quiet Series TM features GTO TM output

control and undershoot corrector in addition to a split ground bus for superior

performance.

NS Part Numbers

54ACQ573DMQB

54ACQ573FMQB

54ACQ573LMQB

Industry Part Number

54ACQ573

Prime Die

E573

Processing

MIL-STD-883, Method 5004

Quality Conformance Inspection

MIL-STD-883, Method 5005

Subgrp Description Temp ( C)

1 Static tests at +25 C

2 Static tests at +125 C

3 Static tests at -55 C

4 Dynamic tests at +25 C

5 Dynamic tests at +125 C

6 Dynamic tests at -55 C

7 Functional tests at +25 C

8A Functional tests at +125 C

8B Functional tests at -55 C

9 Switching tests at +25 C

10 Switching tests at +125 C

11 Switching tests at -55 C

MILITARY DATA SHEET

MN54ACQ573-X REV 1A0

Features

- Icc and Ioz reduced by 50%

- Guaranteed simultaneous switching noise level and dynamic threshold performance

- Improved latch-up immunity

- Inputs and outputs on opposite sides of package allow easy interface with

microprocessors

- Outputs source /sink 24 mA

- Faster prop delay than standard 'ACT573

- 4kV minimum ESD immunity

- Standard Military Drawing (SMD)

- ACQ: 5962-92180

MILITARY DATA SHEET

MN54ACQ573-X REV 1A0

(Absolute Maximum Ratings)

(Note 1)

Supply Voltage (Vcc) -0.5V to +7.0V

DC Input Diode Voltage (Vi) -0.5V to Vcc +0.5V

DC Output Diode Current (Iok) -20 mAVo = -0.5V +20 mAVo = Vcc +0.5V

DC Output Voltage(Vo) -0.5V to Vcc +0.5V

DC Output Source or Sink Current (Io) +50 mA

DC Vcc or Ground Current per Output Pin (Icc or Ignd) +50 mA

Storage Temperature (Tstg) -65 C to +150 C

DC Latchup Source or Sink Current +300 mA

Junction Temperature (Tj) 175 CCDIP

Note 1: Absolute maximum ratings are those values beyond which damage to the device may

occur. The databook specification should be met, without exception, to ensure that

the system design is reliable over its power supply, temperature, and output/ input

loading variables. Nationaldoes not recommend operation FACT TM circuits outside

databook specifications.

Recommended Operating Conditions

(Note 1)

Supply Voltage (Vcc) 2.0V to 6.0V

Input Voltage (Vi) 0V to Vcc

Output Voltage (Vo) 0V to Vcc

Operating Temperature (Ta) -55 C to +125 C

Minimum Input Edge Rate Delta V/Delta t

ACQ Devices

Vin from 30% to 70% of Vcc 125 mV/nsVcc @ 3.0V, 4.5V, 5.5V

Note 1: All commercial packaging is not recommended for applications requiring greater than

2000 temperature cycles from -40 C to + 125 C

MN54ACQ573-X REV 1A0 MILITARY DATA SHEET

Electrical Characteristics

DC PARAMETERS

(The following conditions apply to all the following parameters, unless otherwise specified.)

DC: VCC 3.0V to 5.5V, Temperature Range: -55C to 125C. NOTE: -55C TEMPERATURE, SUBGROUP 3 IS GUARANTEED

BUT NOT TESTED.

SYMBOL PARAMETER CONDITIONS NOTES PIN-

NAME MIN MAX UNIT SUB-

GROUPS

IIH High Level input

current VCC=5.5V, VM=5.5V 1, 2 INPUT 0.1 uA 1

1, 2 INPUT 1.0 uA 2, 3

IIL Low level input

current VCC=5.5V, VM=0.0V 1, 2 INPUT -0.1 uA 1

1, 2 INPUT -1.0 uA 2, 3

VOL Low level output

voltage VCC=3.0V, VIH=2.1V, VIL=0.9V,

IOL=50.0uA 1, 2 OUTPUT .10 V 1, 2,

VCC=4.5V, VIH=3.15V, VIL=1.35V,

IOL=50.0uA 1, 2 OUTPUT .10 V 1, 2,

VCC=5.5V, VIH=3.85V, VIL=1.65V,

IOL=50.0uA 1, 2 OUTPUT .10 V 1, 2,

VCC=3.0V, VIH=2.1V, VIL=0.9V,

IOL=12.0mA 1, 2 OUTPUT .36 V 1

1, 2 OUTPUT .50 V 2, 3

VCC=4.5V, VIH=3.15V, VIL=1.35V,

IOL=24.0mA 1, 2 OUTPUT .36 V 1

1, 2 OUTPUT .50 V 2, 3

VCC=5.5V, VIH=3.85V, VIL=1.65V,

IOL=24.0mA 1, 2 OUTPUT .36 V 1

1, 2 OUTPUT .50 V 2, 3

VIOL Dynamic Output

Current Low VCC=5.5V, VIL=0.0V, VIH=5.5V,

IOL=50.0mA 1,

2, 5 OUTPUT 1.65 V 1, 2,

VOH High Level Output

Voltage VCC=3.0V, VIL=0.9V, VIH=2.1V,

IOH=-50.0uA 1, 2 OUTPUT 2.90 V 1, 2,

VCC=4.5V, VIL=1.35V, VIH=3.15V,

IOH=-50uA 1, 2 OUTPUT 4.40 V 1, 2,

VCC=5.5V, VIL=1.65V, VIH=3.85V,

IOH=-50uA 1, 2 OUTPUT 5.40 V 1, 2,

VCC=3.0V, VIL=0.9V, VIH=2.1V,

IOH=-12.0mA 1, 2 OUTPUT 2.56 V 1

1, 2 OUTPUT 2.40 V 2, 3

VCC=4.5V, VIL=1.35V, VIH=3.15V,

IOH=-24.0mA 1, 2 OUTPUT 3.86 V 1

1, 2 OUTPUT 3.70 V 2, 3

VCC=5.5V, VIL=1.65V, VIH=3.85V,

IOH=-24.0mA 1, 2 OUTPUT 4.86 V 1

1, 2 OUTPUT 4.70 V 2, 3

VIOH Dynamic Output

current High VCC=5.5V, VINH=5.5V, VIH=5.5V,

VIL=0.0V, IOH=-50.0mA 1,

2, 5 OUTPUT 3.85 V 1, 2,

ICCH Positive Supply

Current VCC=5.5V 1, 2 VCC 4.0 uA 1

1, 2 VCC 80 uA 2, 3

MN54ACQ573-X REV 1A0 MILITARY DATA SHEET

Electrical Characteristics

DC PARAMETERS(Continued)

(The following conditions apply to all the following parameters, unless otherwise specified.)

DC: VCC 3.0V to 5.5V, Temperature Range: -55C to 125C. NOTE: -55C TEMPERATURE, SUBGROUP 3 IS GUARANTEED

BUT NOT TESTED.

SYMBOL PARAMETER CONDITIONS NOTES PIN-

NAME MIN MAX UNIT SUB-

GROUPS

ICCL Negative Supply

Current VCC=5.5V 1, 2 VCC 4.0 uA 1

1, 2 VCC 80 uA 2, 3

ICCZ High Impedance

Supply Current VCC=5.5V 1, 2 VCC 4.0 uA 1

1, 2 VCC 80 uA 2, 3

IOZH Maximum TRI-STATE

Leakage Current

High

VCC=3.0V, VIH=2.1V, VM=3.0V 1, 2 OUTPUT 0.25 uA 1

1, 2 OUTPUT 5.0 uA 2, 3

VCC=4.5V, VIH=3.15V, VM=4.5V 1, 2 OUTPUT 0.25 uA 1

1, 2 OUTPUT 5.0 uA 2, 3

VCC=5.5V, VIH=3.85V, VM=5.5V 1, 2 OUTPUT 0.25 uA 1

1, 2 OUTPUT 5.0 uA 2, 3

IOZL Maximum TRI-STATE

Leakage Current

Low

VCC=3.0V, VM=0.0V, VIH=2.1V 1, 2 OUTPUT -0.25 uA 1

1, 2 OUTPUT -5.0 uA 2, 3

VCC=4.5V, VM=0.0V, VIH=3.15V 1, 2 OUTPUT -0.25 uA 1

1, 2 OUTPUT -5.0 uA 2, 3

VCC=5.5V, VM=0.0V, VIH=3.85V 1, 2 OUTPUT -0.25 uA 1

1, 2 OUTPUT -5.0 uA 2, 3

VIKL VCC=4.5V, IKL=-18mA 1, 2 INPUT -1.2 V 1, 2,

VIKH VCC=4.5V, IKL=18mA 1, 2 INPUT 5.7 V 1, 2,

VILD Maximum Low Level

Dynamic Voltage VCC=5.0V, LOAD 50pF, 500 OHMS 6, 9 INPUT 1.5 V 4

VIHD Minimum High

Level Dynamic

Voltage

VCC=5.0V, LOAD 50pF, 500 OHMS 6, 9 INPUT 3.5 V 4

VOLP Quiet Output

Maximum Dynamic

VOL

VCC=5.0V, LOAD 50pF, 500 OHMS 6, 8 OUTPUT 1.75 V 4

VOLV Quiet Output

Minimum Dynamic

VOL

VCC=5.0V, LOAD 50pF, 500 OHMS 6, 8 OUTPUT -1.2 V 4

MN54ACQ573-X REV 1A0 MILITARY DATA SHEET

Electrical Characteristics

AC PARAMETERS

(The following conditions apply to all the following parameters, unless otherwise specified.)

AC: CL=50pf, RL=500 OHMS, TR=3.0ns, TF=3.0ns, Temp range: -55C to +125C. NOTE: -55C TEMPERATURE, SUBGROUP

11 IS GUARANTEED BUT NOT TESTED.

SYMBOL PARAMETER CONDITIONS NOTES PIN-

NAME MIN MAX UNIT SUB-

GROUPS

tpLH(1) Propagation Delay VCC=4.5V 3,

4, 7 Dn to

On 1.5 9.5 ns 9

4, 7 Dn to

On 1.5 11.0 ns 10, 11

tpHL(1) Propagation Delay VCC=4.5V 3,

4, 7 Dn to

On 1.5 9.5 ns 9

4, 7 Dn to

On 1.5 11.0 ns 10, 11

tpLH(2) Propagation Delay VCC=4.5V 3,

4, 7 LE to

On 1.5 9.5 ns 9

4, 7 LE to

On 1.5 11.0 ns 10, 11

tpHL(2) Propagation Delay VCC=4.5V 3,

4, 7 LE to

On 1.5 9.5 ns 9

4, 7 LE to

On 1.5 11.0 ns 10, 11

tpZH(1) Output Enable

Time VCC=4.5V 3,

4, 7 OE to

On 1.5 8.5 ns 9

4, 7 OE to

On 1.5 10.0 ns 10, 11

tpZL(1) Output Enable

Time VCC=4.5V 3,

4, 7 OE to

On 1.5 8.5 ns 9

4, 7 OE to

On 1.5 10.0 ns 10, 11

tpHZ(1) Output Disable

Time VCC=4.5V 3,

4, 7 OE to

On 1.0 9.5 ns 9

4, 7 OE to

On 1.0 10.5 ns 10, 11

tpLZ(1) Output Disable

Time VCC=4.5V 3,

4, 7 OE to

On 1.0 9.5 ns 9

4, 7 OE to

On 1.0 10.5 sn 10, 11

ts(H/L)(1) Setup Time HIGH

or LOW VCC=4.5V 6 Dn to

LE 4.0 ns 9, 10,

th(H/L)(1) Hold Time HIGH or

LOW VCC=4.5V 6 Dn to

LE 2.0 ns 9, 10,

tw(H)(1) Pulse Width VCC=4.5V 6 LE

Pulse

Width

5.0 ns 9, 10,

MN54ACQ573-X REV 1A0 MILITARY DATA SHEET

Electrical Characteristics

AC PARAMETERS(Continued)

(The following conditions apply to all the following parameters, unless otherwise specified.)

AC: CL=50pf, RL=500 OHMS, TR=3.0ns, TF=3.0ns, Temp range: -55C to +125C. NOTE: -55C TEMPERATURE, SUBGROUP

11 IS GUARANTEED BUT NOT TESTED.

SYMBOL PARAMETER CONDITIONS NOTES PIN-

NAME MIN MAX UNIT SUB-

GROUPS

tpLH(3) Propagation Delay VCC=3.0V 3, 4 Dn to

On 1.5 13.0 ns 9

3, 4 Dn to

On 1.5 16.0 ns 10, 11

tpHL(3) Propagation Delay VCC=3.0V 3, 4 Dn to

On 1.5 13.0 ns 9

3, 4 Dn to

On 1.5 16.0 ns 10, 11

tpLH(4) Propagation Delay VCC=4.5V 3, 4 LE to

On 1.5 12.5 ns 9

3, 4 LE to

On 1.5 15.0 ns 10, 11

tpHL(4) Propagation Delay VCC=4.5V 3, 4 LE to

On 1.5 12.5 ns 9

3, 4 LE to

On 1.5 15.0 ns 10, 11

tpZH(2) Output Enable

Time VCC=3.0V 3, 4 OE to

On 1.5 11.5 ns 9

3, 4 OE to

On 1.5 13.5 ns 10, 11

tpZL(2) Output Enable

Time VCC=3.0V 3, 4 OE to

On 1.5 11.5 ns 9

3, 4 OE to

On 1.5 13.5 ns 10, 11

tpHZ(2) Output Disable

Time VCC=3.0V 3, 4 OE to

On 1.5 11.5 ns 9

3, 4 OE to

On 1.5 13.0 ns 10, 11

tpLZ(2) Output Disable

Time VCC=3.0V 3, 4 OE to

On 1.5 11.5 ns 9

3, 4 OE to

On 1.5 13.0 ns 10, 11

ts(H/L)(2) Setup Time HIGH

or LOW VCC=3.0V 6 Dn to

LE 4.0 ns 9, 10,

th(H/L)(2) Hold Time HIGH or

LOW VCC=3.0V 6 Dn to

LE 2.0 ns 9, 10,

tw(H)(2) Pulse Width VCC=3.0V 6 LE

Pulse

Width

5.0 ns 9, 10,

Note 1: SCREEN TESTED 100% ON EACH DEVICE AT +25C & +125C TEMPERATURE, SUBGROUPS 1, 2, 7, &

MN54ACQ573-X REV 1A0 MILITARY DATA SHEET

(Continued)

Note 2: SAMPLE TESTED (METHOD 5005, TABLE 1) ON EACH MFG. LOT AT +25C & +125C TEMPERATURE,

SUBGROUPS A1, 2, 7, & 8.

Note 3: SCREEN TESTED 100% ON EACH DEVICE AT +25C TEMPERATURE ONLY, SUBGROUP A9.

Note 4: SAMPLE TESTED (METHOD 5005, TABLE 1) ON EACH MFG. LOT AT +25C & +125C TEMPERATURE,

SUBGROUPS A9 & 10.

Note 5: TRANSMISSION LINE DRIVING TEST, GUARDBAND LIMITS SET FOR +25C, 2 MSEC DURATION MAX.

Note 6: GUARANTEED BUT NOT TESTED (DESIGN CHARACTERIZATION DATA)

Note 7: +25C & +125C MIN LIMITS GUARANTEED FOR 5.5V BY GUARDBANDING 4.5V MIN. LIMITS.

Note 8: MAX NUMBER OF OUTPUTS DEFINED AS (N). DATA INPUTS ARE DRIVEN 0V TO 5V. ONE OUTPUT @

GND.

Note 9: MAX NUMBER OF DATA INPUTS (N) SWITCHING. N-1 INPUTS SWITCHING 0V TO 5V.

INPUT-UNDER-TEST SWITCHING- 5V TO THRESHOLD (VILD), 0V TO THRESHOLD (VIHD), FREQ. = 1

MHz.