D Series Circular Plastic Connectors * * * * * * * * 3, 4, 5, 7, 9, 12 and 25 position models 1 to 8 Amps per contact Mixed signal and power or coax available Each connector half accepts pins or sockets High temp ULTEM plastic body Quick disconnect push button release Alignment and polarization provided by housing Crimp, solder cup, and pc contacts Connector Dimensions P EE1 EE/EP Plug Panel Mount Receptacle Receptacle Mating Face EP Cable Mount Receptacle Mounting Dimensions Hole Punches Part Number Series Maximum Recommended Panel Thickness in Steel Dimension D00 Housing D01 Housing D02 Housing A 0.788 [20.00] 1.142 [29.00] 1.358 [34.50] B 1.096 [27.83] 1.614 [41.00] 1.950 [49.50] C 1.181 [30.00] 1.732 [44.00] 2.087 [53.00] D N/A 2.400 [61.00] 2.953 [75.00] 1.772 [45.00] F N/A 1.500 [38.00] G Dia. N/A 0.512 [13.00] 0.709 [18.00] H Cable Dia. 0.089 [2.50] Min. 0.158 [4.00] Max. 0.118 [3.00] Min. 0.216 [5.50] Max. 0.197 [5.00] Min. 0.315 [8.00] Max. J Dia. 0.352 [8.94] 0.472 [12.00] 0.709 [18.00] Maximum Recommended Panel Thickness in Alum. K 0.114 [2.88] 0.161 [4.10] 0.278 [7.00] L M8 X 1.00 M11 X 1.00 Thd. M15 X 1.00 Thd. M 0.323 [8.20] 0.512 [13.00] 0.669 [17.00] TBD D00 0.048 [1.25] 0.075 [1.90] T1903 D01 0.048 [1.25] 0.075 [1.90] N 0.320 [8.12] 0.512 [13.00] 0.689 [17.50] T1904 D02 0.062 [1.60] 0.094 [2.40] Q Dia. 0.092 [2.34] 0.126 [3.20] 0.100 [2.54] R 0.161 [4.10] 0.220 [5.60] 0.295 [7.50] S Dia. 0.323 [8.20] 0.441 [11.20] 0.598 [15.20] NOTE: 1) Recommended tightening torque for panel mount receptacle (0.452-0.678 N*M) for both D01 and D02. Dimensions are in inches [mm] www.hypertronics.com 2/1 D Series D00 General Specifications 5 Pin Contact Diameter 0.012 [0.30] Current Rating (Amps) 1 Contact Resistance (milliohms) < 6.7 Extraction Force Per Contact (oz.) 0.35 to 1.6 Contact Life Cycles up to 100,000 Breakdown Voltage Between Contacts > 1000V Dielectric Withstanding Voltage >750V Contact Socket Material Beryllium copper wires and brass body (socket) Pin Material Brass; gold over nickel (pin) Plating Material Gold over nickel Insulation Resistance > 103 megohms at 500 VDC Temperature Rating* Polyetherimide -40 C to 125 C Housing Options D00 5 Pin Receptacle Panel Mount Plug 5 4 Contact Options 1 3 2 Example Part Numbers D00EEB503FRUTAH D00PB503MRUTH See part number configurator on page 2/3 for complete ordering information. Crimp Socket - 26-28 AWG Crimp Pin - 26-28 AWG Tools Receptacle seen from mating side Crimp Tool Crimp Positioner Insertion Tool AFM8 or M22520/2-01 T1914 T1916 Dimensions are in inches [mm] 2/2 www.hypertronics.com D Series Ordering Information D01 Connector Housing Insulator Main Body Color P = Plug EE = Receptacle panel mount EP = Receptacle cable mount (EP Not available for 215/705 or 503 style) 306 F R U TAH See Plating Reference Material U = Ultem 1010R Terminal R = Crimp (shipped unassembled) D00 available with "R" termination only (for crimp or solder) Styles RR = Crimp for 18-20 AWG (D01/306 and D01/406 only. (shipped unassembled) S = Solder cup (shipped unassembled) B = Black D01 4 Pin = 406 D01 9 Pin = 904 D02 3 Pin = 315 D02 7 Pin = 706 B Plating D00, D01, D02 D00 5 Pin = 503 Contact Arrangement D01 3 Pin = 306 P D02 9 Pin = 906 D02 12 Pin = 125 D02 25 Pin = 2504 D02 Power/Signal = 215/705 Contact M = Male Gender F = Female D00 panel mount receptacle with 6" pigtail leads preterminated= D00EEB-0001 ** Mounting options are available, see http://www.hypertronics.com/en/Products/circular-connectors/D-Series.aspx or call +1 (978) 568-0451 for more information. Dimensions are in inches [mm] www.hypertronics.com 2/3