Square 0.134" 4-Character 5x5 Dot Matrix Serial Input Dot Addressable Intelligent Display(R) Devices Lead (Pb) Free Product - RoHS Compliant SCDQ554xQ SCDQ554xP SCDQ554xR Yellow SCDQ5541P/Q/R Super-red SCDQ5542P/Q/R Green SCDQ5543P/Q/R High Efficiency Green SCDQ5544P/Q/R DESCRIPTION FEATURES * Four 3.40 mm (0.134") 5 x 5 Dot Matrix Characters in Red, Yellow, Super-red, Green, or High Efficiency Green * Optimum Display Surface Efficiency (display area to package ratio) * Square Character Format to Display Data in a Vertical or Horizontal Format * High Speed Data Input Rate: 5.0 MHz * ROMless Serial Input, Dot Addressable Display-- Ideal for User Defined Characters * Built-in Decoders, Multiplexers and LED Drivers * Readable from 1.8 meters (6 Feet) * Wide Viewing Angle, 55 in X-Axis and Y-Axis * Attributes: - 100 Bit RAM for User Defined Characters - Eight Dimming Levels - Power Down Model (<250 W) - Software Clear Function - Lamp Test - 3.3 V Capability The SCDQ5541X (Yellow), SCDQ5542X (Super-red), SCDQ5543X (Green), and SCDQ5544X (High Efficiency Green) are four digit, dot addressable 5 x 5 dot matrix, serial input, alphanumeric Intelligent Display devices in a square format. The four digits are packaged in a rugged, high quality, optically transparent, plastic package several mounting options. The SIP Pin for standard display mounting and 90 Bend SIP for side mounting. Additionally, a connector/header configuration is also available for display side mounting. The on-board CMOS has a 100 bit RAM, one bit associated with one LED, each to generate User Defined Characters. In Power Down Mode, quiescent current is <50 A. The SCDQ554XX is designed for work with the serial port of most common microprocessors. Data is transferred into the display through the Serial Data Input (DATA), clocked by the Serial Data Clock (SDCLK), and enabled by the Load Input (LOAD). 2006-05-12 1 SCDQ5541P/Q/R, SCDQ5542P/Q/R, SCDQ5543P/Q/R, SCDQ5544P/Q/R Ordering Information Type Color of Emission SCDQ5541P yellow SCDQ5542P super-red SCDQ5543P green SCDQ5544P high efficiency green Q68100A1474P SCDQ5541Q yellow Q68100A1472Q SCDQ5542Q super-red SCDQ5543Q green SCDQ5544Q high efficiency green Q68100A1474Q SCDQ5541R yellow Q68100A1472R SCDQ5542R super-red SCDQ5543R green SCDQ5544R high efficiency green 2006-05-12 Character Height mm (inch) Ordering Code Q68100A1472P 3.2 (0.134) 3.2 (0.134) 3.2 (0.134) Q68100A1078P Q68100A1473P Q68100A1078Q Q68100A1473Q Q68100A1078R Q68100A1473R Q68100A1474R 2 SCDQ5541P/Q/R, SCDQ5542P/Q/R, SCDQ5543P/Q/R, SCDQ5544P/Q/R Maximum Ratings Operation in excess of any of these conditions may result in permanent damage to this device (TA = 25C) Parameter Symbol Value Unit Operating temperature range Top - 40 ... + 85 C Storage temperature range Tstg - 40 ... + 100 C Supply Voltage VCC to GND (non-operating) VCC -0.5 to + 7.0 V -0.5 to VCC to 5.5 V 260 C 85 % 2.0 kV Input Current 100 mA Power Dissipation at 85C 0.65 W Input Voltage, any Pin to GND Solder Temperature, Connector only 1.59 mm (0.063") below seating plane, t < 5.0 s TS Relative Humidity (non-condensing) ESD (100 pF, 1.5 k) VZ Optical Characteristics at 25C (VCC=5.0 V at 100% brightness level, viewing angle: X axis 55, Y axis 65) High Efficiency Green SCDQ5544 Unit Green SCDQ5543 Values Super-red SCDQ5542 Symbol Yellow SCDQ5541 Description Luminous Intensity (min.) IVpeak Character Average (#displayed all digits) (typ.) 1.8 5.4 1.8 5.4 1.8 5.4 2.1 6.4 mcd mcd (typ.) peak 583 630 565 568 nm (typ.) dom 585 620 570 574 nm Peak Wavelength Dominant Wavelength Notes: 1. Dot to dot intensity matching at 100% brightness is 1.8:1. 2. Displays are binned for hue at 2.0 nm intervals. 3. Displays within a given intensity category have an intensity matching of 1.5:1 (max.). 2006-05-12 3 SCDQ5541P/Q/R, SCDQ5542P/Q/R, SCDQ5543P/Q/R, SCDQ5544P/Q/R Package Outlines Dimensions in mm (inch) SCDQ554XP SIP Package Typical Package Outline & Matrix 1) 5.08 (0.200) 19.91 (0.784) Pin 1 1.65 (0.065) 2 (0.079) 0.25 (0.010) Tolerance-Non Cum. 0.3 (0.012) x 0.46 (0.018) 0.38 (0.015) 0.05 (0.002) 3.4 (0.134) 1) 5.08 (0.200) 3.4 (0.134) SCDQ554XQ 90 SIP Package 1) SCDQ554XR 90 Connector/Header Package 1.27 (0.050) 4.75 (0.187) 10.16 (0.400) 1) 2) Pin 1 0.3 (0.012) x 0.46 (0.018) 4.06 (0.160) Pin 1 0.05 (0.002) 4 (0.157) 5.96 (0.235) 0.38 (0.015) 9.98 (0.393) 0.38 (0.015) 1) 1) 1) Part marking is on this side of the display. RoHS Compliant (lead-free) have a "Z" marked to the right of the date code. 2) Molex header, 53290-0510 mounted on the display. 3) Molex receptacle, 52418-0510 mounted on the customer's PCB. Supplied by the customer. Use Pin 1 designation on this drawing, not the Molex connector specification. 4) Unless otherwise specified all tolerances are 0.25 (0.010). 2006-05-12 4 12.07 (0.475) max. 11.3 (0.445) typ. 2 (0.079) 0.25 (0.010) 3) 9.27 (0.365) max. 8.76 (0.345) typ. 2.83 (0.112) 5.96 (0.235) 0.25 (0.010) IDOD5001 SCDQ5541P/Q/R, SCDQ5542P/Q/R, SCDQ5543P/Q/R, SCDQ5544P/Q/R Electrical characteristics (over operating temperature, unless otherwise specified, TA = 25C) Parameter Min. Typ. Max. Units Conditions VCC 4.5 -- 5.5 V -- ICC (Power Down Mode) -- -- 5.0 A VCC=5.0 V, all inputs=0 V or VCC ICC (16 dots on per digit)1) -- 100 145 mA VCC=5.0 V, "#" displayed in all 4 digits at 100% brightness at 25xC VIH 3.5 -- -- V VCC=4.5 V to 5.5 V VIL -- -- 1.5 V VCC=4.5 V to 5.5 V IIH -- -- 10 A VCC=VIN=5.0 V (all inputs) IIL -- -- -10 A VCC=5.0 V, VIN=0 V (all inputs) Internal Mux Frequency 375 768 1086 Hz -- ja -- 65 -- C/W -- Notes: 1) ICC is an average value, the Peak current is 5/3 x ICC. 2) Contact manufacturer for 3.3 volt operation. Input Circuit The input resistor/diode network shown below is used for ESD protection and to eliminate substrate latch-up caused by input voltage over/under shoot. Inputs VCC Input 1 k GND IDCD5021 Pinout and Pin Definitions Pin Function Definitions 1 LOAD Low input enables data clocking into 8-bit serial shift register. When LOAD goes high, the contents of 8- bit serial Shift Register will be decoded. 2 SDATA Serial data input 3 SDCLK Loads data into the 8-bit serial data register on a low to high transition 4 VCC Power supply 5 GND Power supply ground 2006-05-12 5 SCDQ5541P/Q/R, SCDQ5542P/Q/R, SCDQ5543P/Q/R, SCDQ5544P/Q/R Close Up of Data "Write" Cycle Device Timing TWR TBL LOAD SDCLK DATA D0 D1 D2 D3 D4 D5 D6 D7 D0 D4 D5 D6 D7 D0 OR LOAD SDCLK DATA D0 D1 D2 D3 Write Cycle Timing (over operating temperature range, VCC=VLL=4.5 V to 5.5 V) Symbol Description Min. Max. Units TLDS Load Setup Time 50 -- ns TDS Data Setup Time 50 -- ns TSDCLK Clock Period 200 -- ns TSDCW (HI or LOW) Clock Width 70 -- ns TLDH Load Hold Time 0 -- ns TDH Data Hold Time 25 -- ns TWR Total Write Time 2.25 -- s TBL Time Between Writes 600 -- ns TRST Reset Active Time 600 -- ns Notes: 1. TWR=Setup Time + 8 Clock Times + Hold Times + Time Between Writes. 2. Data is shifted into the display's 8 bit shift register on the positive going edge of the SDCLK. 3. Shift register data is evaluated when Load goes high. 2006-05-12 6 SCDQ5541P/Q/R, SCDQ5542P/Q/R, SCDQ5543P/Q/R, SCDQ5544P/Q/R Dot Matrix Format Character Address, Row, & Column Data Map Col4(D4) Col3(D3) Col2(D2) Col1(D1) Col0(D0) Pins/Conector located at the top of the display 3.4 (0.134) 0.79 (0.031) 3.4 (0.134) Char 0 Char 1 Char 2 Rw0 Rw1 Rw2 Rw3 Rw4 Char 3 IDPA5106 0.79 (0.031) 1. Viewed from the LED side of the display with the display in a horizontal position. 2. The row address and column data are typical for all character positions. The LED is on when the data bit = 1 and off when the data bit = 0. IDOD5012 Suggested Display Mounting 90 SIP Connector / Header Packages Suggested Display Mounting SIP PAckage 90 SIP Connector/Header Packages SIP Package Pins/Conector located at the top of the display PCB Pins/Conector located at the top of the display PCB PCB IDPA5101 IDPA5102 Operation of the SCDQ554XX The SCDQ554XX display consists of a CMOS IC containing control logic and drivers for four 5 x 5 characters. These components are assembled in a compact plastic package. Individual LED dot addressablity allows the user great freedom in creating special characters or mini-icons. The User Definable Character Set examples illustrate 200 different character and symbol possibilities. Each example has the hexadecimal code required to display characters in a horizontal or vertical format. See Figures above, Suggested Display Mounting, for the display positioning. Generally, the contacts should be on the right side of the display for the vertical format and on the top of the display for the horizontal format. 2006-05-12 The serial data interface provides a highly efficient interconnection between the display and the mother board. The SCDQ554XX requires only three input lines as compared to 15 for an equivalent four character parallel input part. The on-board CMOS IC is the electronic heart of the display. The IC accepts decoded serial data, which is stored in the internal RAM. Asynchronously the RAM is read by the character multiplexer at a strobe rate that results in a flicker free display. shows the three functional areas of the IC. These include: the input serial data register and control logic, a 100 bits two port RAM, and an internal multiplexer/display driver. 7 SCDQ5541P/Q/R, SCDQ5542P/Q/R, SCDQ5543P/Q/R, SCDQ5544P/Q/R SCDQ Block Diagram Counter Chain & Timing Row Decoder & Driver Oscillator Lamp Test 4-5x5 Characters 5 20 Power Down Control Word Register 5 20 3 Software Clear & 20 x 5 bit Dual Port Ram Column Output 3 Write Character/Row Address Decode Character Adddress Register Display Multiplexer OPCODE Decoder Serial Data Register D7 D6 D5 D4 D3 D2 D1 D0 OPCODE DATA Brightness SDCLK SDATA LOAD Column Logic & Driver IDBD5061 The following explains how to format the serial data to be loaded into the display. The user supplies a string of bit mapped decoded characters. The contents of this string is shown in Figure Loading Serial Character Data A" (page 8). Figure Loading Serial Character Data B" (page 8) shows that each character consists of six 8 bit words. The first word encodes the display character location and the succeeding five bytes are row data. The row data represents the status (On, Off) of individual column LEDs. Figure Loading Serial Character Data C" (page 8) shows that each 8 bit word is formatted to include a three bit Operational Code (OPCODE) defined by bits D7-D5 and five bits (D4-D0) representing Column Data, Character Address, or Control Word Data. Figure Loading Serial Character Data D" (page 8) shows the sequence for loading the bytes of data. Bringing the LOAD line low enables the serial register to accept data. The shift action occurs on the low to high transition of the serial data clock (SDCLK). The least significant bit (D0) is loaded first. After eight clock pulses the LOAD line is brought high. With this transition the OPCODE is decoded. The decoded OPCODE directs D4-D0 to be latched in the Character Address register, stored in the RAM as Column data, or latched in the Control Word register. The control IC requires a minimum 600 ns delay between successive byte loads. Loading Serial Character Data A Character 0 Character 1 Character 2 Character 3 B B Character Address 0 Row 0 Row 1 Row 2 Row 3 Column Data Column Data Column Data Column Data Row 4 Column Data C C TBL Opcode TBL Column Data Opcode Character Address D0 D1 D2 D3 D4 D5 D6 D7 600 ns D0 D1 D2 D3 D4 D5 D6 D7 600 ns min. min. C4 C3 C2 C1 C0 0 0 0 0 0 0 0 0 1 0 1 D LOAD D SDCLK DATA D0 D1 D2 D3 D4 D5 D6 D7 TBL DD IDTC5043 2006-05-12 8 SCDQ5541P/Q/R, SCDQ5542P/Q/R, SCDQ5543P/Q/R, SCDQ5544P/Q/R The Character Address bits, D4-D0 stored in the Character Address Register and the Column Data Instruction's Row Address bits, D7-D5, direct the Column Data bits, D4-D0 to specific RAM location. See the Instruction Set Table for address and data format. Figure Writing Character 'D' Example" (page 9) shows the Row Address for the example character "D" See Figure Character Address, Row, & Column Data Map" (page 7) for the dot positioning (Display contacts are at the top of the display). Column data is written and read asynchronously from the 200 bit RAM. Once loaded the internal oscillator and character multiplexer reads the data from the RAM. These characters are row strobed with column data as shown in Figure Row Strobe Example" (page 10). The character strobe rate is determined by the internal IC's/320 counter. Instruction Set OPERATION D 7 D 6 D 5 D 4 D 3 D 2 D 1 D 0 HEX DESCRIPTION CONTROL WORD 1 1 1 1 L T B r B r B r F0+X Select Control Word plus operand See Control Word Format Power Down Mode 1 1 1 1 1 1 1 1 FF Power Down Mode-0% Brightness SFT CLEAR 1 1 0 0 0 0 0 0 C0 Software Clear ADDRESS 1 0 1 0 0 0 0 0 A0 Select Digit Address 0 REGISTER 1 0 1 0 0 0 0 1 A1 Select Digit Address 1 CHR ADRS 1 0 1 0 0 0 1 0 A2 Select Digit Address 2 0-3 1 0 1 0 0 0 1 1 A3 Select Digit Address 3 COLUMN DATA 0 0 0 D 4 D 3 D 2 D 1 D 0 00+X Row 0 D4-D0=Column Data 0 0 1 D 4 D 3 D 2 D 1 D 0 20+X Row 1 D4-D0=Column Data 0 1 0 D 4 D 3 D 2 D 1 D 0 40+X Row 2 D4-D0=Column Data 0 1 1 D 4 D 3 D 2 D 1 D 0 60+X Row 3 D4-D0=Column Data 1 0 0 D 4 D 3 D 2 D 1 D 0 80+X Row 4 D4-D0=Column Data Row data is written to the character address contained in the Character Address Register. Writing Character "D" Example Row and Column Locations for a Character "D" Op code D7 D6 D5 Column Data D4 D3 D2 C0 C1 C2 Hex D1 C3 D0 C4 Row 0 0 0 0 1 1 1 1 0 1E Row 1 0 0 1 1 0 0 0 1 31 Row 2 0 1 0 1 0 0 0 1 51 Row 3 0 1 1 1 0 0 0 1 71 Row 4 1 0 0 1 1 1 1 0 9E Row 0 Off LED Row 1 On LED Row 2 Previously "on" LED Row 3 Row 4 0 1 2 3 Columns 4 IDXX5181 2006-05-12 9 SCDQ5541P/Q/R, SCDQ5542P/Q/R, SCDQ5543P/Q/R, SCDQ5544P/Q/R Row Strobe Example Row Load Load Row 2 Load Row 1 Load Row 0 Load Row 4 Load Row 3 Row 0 Row 0 Row 0 Row 0 Row 0 Row 1 Row 1 Row 1 Row 1 Row 1 Row 2 Row 2 Row 2 Row 2 Row 2 Row 3 Row 3 Row 3 Row 3 Row 3 Row 4 Row 4 Row 4 Row 4 0 1 2 3 4 Columns 0 1 2 3 4 Columns Row 4 0 1 2 3 4 Columns 0 1 2 3 4 Columns 0 1 2 3 4 Columns IDXX5182 The user can activate four Control functions. These include: LED Brightness Level, Lamp Test, IC Power Down, or Display Clear. OPCODEs and five bit words are used to initiate these functions. The OPCODEs and Control Words for the Character Address and Loading Column Data are shown in Instruction Set Table. The Lamp Test is enabled by loading F8HEX into the serial shift register. This Control Word sets all of the LEDs to a 53% brightness level. Operation of the Lamp Test has no affect on the RAM and is cleared by loading a Brightness Control Word. The user can select seven specific LED brightness levels. These brightness levels (in percentages of full brightness of the display) include: 100% (F0HEX), 53% (F1HEX), 40% (F2HEX), 27% (F3HEX), 20% (F4HEX), 13% (F5HEX), and 6.6% (F6HEX). The brightness levels are controlled by changing the duty factor of the row strobe pulse. Lamp Test Display Brightness Op code D7 D6 D5 Control Word D4 D3 D2 D1 D0 Hex Operation Level 1 1 1 1 0 0 0 1 1 1 1 0 0 0 0 F0 100% 1 F1 53% 1 1 1 1 0 0 1 1 1 1 0 0 1 0 F2 40% 1 1 F3 1 1 1 1 0 27% 1 0 0 F4 1 1 1 1 20% 0 1 0 1 F5 13% 1 1 1 1 0 1 1 0 F6 6.6% D1 D0 1 1 1 1 1 1 2006-05-12 1 1 Hex Operation Level FF 0% brightness D1 D0 Hex 1 1 1 1 0 B B B 1 1 1 1 1 0 0 0 Operation Level Lamp Test (OFF) F8 Lamp Test (ON) Software Clear Op code D7 D6 D5 Control Word D4 D3 D2 D1 D0 1 0 0 0 1 0 0 0 Hex Operation Level C0 CLEAR Electrical & Mechanical Considerations Interconnect Considerations Optimum product performance can be had when the following electrical and mechanical recommendations are adopted. The SCDQ554XX's IC is constructed in a high speed CMOS process, consequently high speed noise on the SERIAL DATA, SERIAL DATA CLOCK, and LOAD lines may cause incorrect data to be written into the serial shift register. Adhere to transmission line termination procedures when using fast line drivers and long cables (>10 cm). Good digital grounds (pin 1) and power supply decoupling (pin 2) will insure that ICC (<350 mA peak) switching currents do not generate localized ground bounce. Therefore it is recommended that each display package use a 0.1 F and 20 F capacitor between VCC and ground. Power Down Control Word D4 D3 D2 Control Word D4 D3 D2 The Software Clear (C0HEX) clears the Address Register and the RAM. The display is blanked and the Character Address Register will be set to Character 0. The internal counter and the Control Word Register are unaffected. The Software Clear will remain active until the next data input cycle is initiated. The SCDQ554X offers a unique Display Power Down feature which reduces ICC to less than 50 A. When FFHEX is loaded the display is set to 0% brightness and the internal multiplex clock is stopped. When in the Power Down mode data may still be written into the RAM. The display is reactivated by loading a new rightness Level Control Word into the display. Op code D7 D6 D5 Op code D7 D6 D5 10 SCDQ5541P/Q/R, SCDQ5542P/Q/R, SCDQ5543P/Q/R, SCDQ5544P/Q/R ESD Protection The input protection structure of the SCDQ554XX provides significant protection against ESD damage. It is capable of withstanding discharges greater than 2.0 kV. Take all the standard precautions, normal for CMOS components. These include properly grounding personnel, tools, tables, and transport carriers that come in contact with unshielded parts. If these conditions are not, or cannot be met, keep the leads of the device shorted together or the parts in anti-static packaging. this effect. Take care not to overheat the plastic filter by allowing for proper air flow. Optimal filter enhancements are gained by using circular polarized, anti-reflective, band-pass filters. The circular polarizing further enhances contrast by reducing the light that travels through the filter and reflects back off the display to less than 1%. Several filter manufacturers supply quality filter materials. Some of them are: Panelgraphic Corporation, W. Caldwell, NJ; SGL Homalite, Wilmington, DE; 3M Company, Visual Products Division, St. Paul, MN; Polaroid Corporation, Polarizer Division, Cambridge, MA; Marks Polarized Corporation, Deer Park, NY, Hoya Optics, Inc., Fremont, CA. One last note on mounting filters: recessing displays and bezel assemblies is an inexpensive way to provide a shading effect in overhead lighting situations. Several Bezel manufacturers are: R.M.F. Products, Batavia, IL; Nobex Components, Griffith Plastic Corp., Burlingame, CA; Photo Chemical Products of California, Santa Monica, CA; I.E.E.-Atlas, Van Nuys, CA. Soldering Considerations The SCDQ554XX can be hand soldered with SN63 solder using a grounded iron set to 260C. Wave soldering is also possible following these conditions: Preheat that does not exceed 93C on the solder side of the PC board or a package surface temperature of 85C. Water soluble organic acid flux (except carboxylic acid) or resin-based RMA flux without alcohol can be used. Wave temperature of 245C 5C with a dwell between 1.5 s to 3.0 s. Exposure to the wave should not exceed temperatures above 260C for five seconds at 1.59 mm (0.063") below the seating plane. The packages should not be immersed in the wave. The SCDQ554XR connects to an external connector receptacle which may be soldered before inserting the SCDQ554XR Display. In this way, only the connector is subject to the user's soldering process. The Molex 52418-0510 receptacle called out in the product drawing can be used in solder reflow processes. See Molex for specifications. Post Solder Cleaning Procedures The least offensive cleaning solution is hot D.I. water (60C) for less than 15 minutes. Addition of mild saponifiers is acceptable. Do not use commercial dishwasher detergents. For faster cleaning, solvents may be used. Exercise care in choosing solvents as some may chemically attack the nylon package. For further information refer to Appnotes 18 and 19 at www.osram-os.com or in the current Short Form Catalogue. See Appnote 19, Table 2, "Displays-Group 2". Optical Considerations The 3.12 mm (0.123") high character of the SCDQ554XX gives readability up to five feet. Proper filter selection enhances readability over this distance. Using filters emphasizes the contrast ratio between a lit LED and the character background. This will increase the discrimination of different characters. The only limitation is cost. Take into consideration the ambient lighting environment for the best cost/benefit ratio for filters. Incandescent (with almost no green) or fluorescent (with almost no red) lights do not have the flat spectral response of sunlight. Plastic band-pass filters are an inexpensive and effective way to strengthen contrast ratios. The SCDQ5542X is a super-red display and should be matched with long wavelength pass filter in the 570 nm to 590 nm range. The SCDQ5541X/3X/4X should be matched with a yellow-green band-pass filter that peaks at 565 nm. For displays of multiple colors, neutral density grey filters offer the best compromise. Additional contrast enhancement is gained by shading the displays. Plastic band-pass filters with built-in louvers offer the next step up in contrast improvement. Plastic filters can be improved further with anti-reflective coatings to reduce glare. The trade-off is fuzzy characters. Mounting the filters close to the display reduces 2006-05-12 11 SCDQ5541P/Q/R, SCDQ5542P/Q/R, SCDQ5543P/Q/R, SCDQ5544P/Q/R SCDQ554XX Interface to Siemens/Intel 8031 Microprocessor (using serial port in mode 0) VCC VCC RxD TxD P3.3 XTAL 4 2 SDATA 3 SDCLK 1 LOAD SCDQ554XX 8031 VCC + RST 0.01 F 20 F 5 IDCD5022 SCDQ554XX Interface to Siemens/Intel 8031 Microprocessor (using one bit of parallel port as serial input) VCC VCC P0.0 P3.6 P3.0 XTAL 4 2 SDATA 3 SDCLK 1 LOAD SCDQ554XX 8031 VCC + RST 0.01 F 20 F 5 IDCD5023 Microprocessor Interface The microprocessor interface is through the serial port, SPI port or one out of eight data bits on the eight bit parallel port and also control lines SDCLK and LOAD. Power Up Sequence Upon power up display will come on at random. Thus the display should be reset at power-up. The reset will set the Address Register to Digit 0, User RAM is set to 0 (display blank) the Control Word is set to 0 (100% brightness with Lamp Test off) and the internal counters are reset. SCDQ554XX Interface with Motorola 68HC05C4 Microprocessor (using SPI port) VCC XTAL P0.0 SCLK MOSI VCC 4 2 SData 3 SDCLK 1 Load SCDQ554XX 68HC05 VCC + RST 0.01 F 20 F 5 IDCD5024 2006-05-12 12 SCDQ5541P/Q/R, SCDQ5542P/Q/R, SCDQ5543P/Q/R, SCDQ5544P/Q/R Loading Data into the Display Use following procedure to load data into the display: 1. Power up the display. 2. Step A: software clear the display. 3. Step B: Load the Control Word with the desired brightness level. 4. Load the Digit Address into the display. 5. Load display row and column data for the selected digit. 6. Repeat steps 4 and 5 for all digits. Data Contents for the Display in a Horizontal Format "AB" Step D7 D6 D5 D4 D3 D2 D1 D0 Function A B (optional) 1 1 1 1 0 1 0 1 0 0 0 B 0 B 0 B CLEAR BRIGHTNESS SELECT 1 2 3 4 5 6 1 0 0 0 0 1 0 0 0 1 1 0 1 0 1 0 1 0 0 0 0 1 0 0 0 0 1 0 0 0 0 1 1 1 1 1 0 0 1 0 0 0 0 0 0 1 0 0 DIGIT D0 SELECT ROW 0 D0 () ROW 1 D0 () ROW 2 D0 () ROW 3 D0 () ROW 4 D0 () 7 8 9 10 11 12 1 0 0 0 0 1 0 0 0 1 1 0 1 0 1 0 1 0 0 0 0 1 1 1 0 0 1 1 0 0 0 1 0 1 0 0 0 0 1 1 0 0 1 0 0 1 1 1 DIGIT D1 SELECT ROW 0 D1 (A) ROW 1 D1 (A) ROW 2 D1 (A) ROW 3 D1 (A) ROW 4 D1 (A) 13 14 15 16 17 18 1 0 0 0 0 1 0 0 0 1 1 0 1 0 1 0 1 0 0 1 0 0 0 1 0 1 1 1 1 1 0 1 0 1 0 1 1 1 0 1 0 1 0 0 1 0 1 0 DIGIT D2 SELECT ROW 0 D2 (B) ROW 1 D2 (B) ROW 2 D2 (B) ROW 3 D2 (B) ROW 4 D2 (B) 19 20 21 22 23 24 1 0 0 0 0 1 0 0 0 1 1 0 1 0 1 0 1 0 0 0 0 1 0 0 0 0 0 0 1 0 0 1 1 1 1 1 1 0 0 0 1 0 1 0 0 1 0 0 DIGIT D3 SELECT ROW 0 D3 () ROW 1 D3 () ROW 2 D3 () ROW 3 D3 () ROW 4 D3 () 2006-05-12 13 SCDQ5541P/Q/R, SCDQ5542P/Q/R, SCDQ5543P/Q/R, SCDQ5544P/Q/R User Definable Character Set Examples* Upper and lower case alphabets 00 32 52 72 8D 80 71 5F 31 00 9F 74 56 35 08 8E 71 55 2E 01 91 73 55 39 11 00 2F 51 6F 81 8F 62 44 28 08 00 33 54 78 90 89 6B 4D 29 00 89 65 42 24 08 00 31 4A 64 98 80 65 57 21 00 9F 62 44 24 03 04 20 4C 64 8E 84 6A 4A 2A 0F 8F 6A 4A 2A 04 86 69 49 29 06 89 66 46 29 00 8F 62 44 22 0F 9F 64 44 24 1F 8E 71 51 35 17 90 68 47 28 10 86 69 49 2B 0B 82 6F 52 28 00 86 6D 4D 2D 04 8F 64 48 28 07 10 30 56 79 91 00 3E 51 7E 90 00 32 4C 6C 92 1E 31 5E 74 92 1F 22 44 68 9F 00 2F 50 73 8F 00 2E 51 71 8E 00 31 55 7B 91 9F 74 54 34 08 8E 71 51 31 0E 91 6A 44 2A 11 9F 62 44 22 1F 9C 62 41 22 1C 82 65 45 25 1F 87 68 44 28 07 00 36 59 71 91 00 31 51 6A 84 9F 74 54 34 10 9F 75 55 35 11 9F 68 44 22 1F 9F 68 44 28 1F 9F 61 41 21 01 80 71 5F 21 00 9F 62 45 25 00 08 3C 48 6A 84 00 2A 55 71 91 0E 24 44 64 8E 0C 32 56 72 8D 11 2A 44 64 84 04 2A 48 7C 88 HEX CODE 11 31 5F 71 91 1E 31 5E 70 90 11 2A 44 6A 91 00 2E 5F 70 8E HEX CODE 0F 30 53 71 8F 0E 31 51 71 8E 11 31 55 7B 91 01 21 4F 71 8F 0C 24 44 64 8E 88 7E 49 22 00 80 61 45 2A 08 10 30 56 78 96 00 23 44 62 8C 86 69 49 29 09 9F 65 45 25 02 00 2F 50 70 8F HEX CODE 1F 30 5E 70 90 11 39 55 73 91 11 31 51 6A 84 8E 61 41 2E 01 00 26 42 72 8C HEX CODE 11 31 51 71 8E 10 30 5E 71 9E 82 61 49 2E 00 HEX CODE 00 2E 52 72 8D 11 3B 55 71 91 9E 61 41 21 1E 90 70 5F 30 10 1F 24 44 64 84 86 69 49 2E 01 HEX CODE 0F 30 4E 61 9E 10 30 50 70 9F HEX CODE 1F 30 5E 70 9F 8C 62 41 22 0C 13 34 58 74 93 89 75 55 35 12 HEX CODE 01 21 41 71 8E HEX CODE 1E 29 49 69 9E 0F 30 50 70 8F 9F 64 4A 31 11 82 61 41 21 1E 1E 29 4E 69 9E HEX CODE 91 7F 51 31 0E 91 7F 55 35 0A 87 6C 54 2C 07 HEX CODE HEX CODE 04 2A 5F 71 91 HEX CODE 8E 71 51 31 11 HEX CODE HEX CODE 00 3E 44 68 9E IDCS5081 Numerals and punctuation 0E 31 42 64 88 8A 75 55 35 0A 80 60 5F 31 11 8A 6A 4A 2A 0A 80 71 4A 24 00 07 24 44 64 87 00 3F 40 7F 80 08 24 42 64 88 88 70 48 24 08 84 68 50 28 04 04 2A 51 60 80 80 71 4E 20 00 80 60 4E 31 00 80 78 40 38 00 80 60 5D 20 00 80 64 42 31 00 80 75 56 20 00 15 2E 5F 6E 95 90 73 54 38 10 86 6D 55 35 02 80 7A 5C 20 00 8A 75 4D 22 05 81 62 44 28 10 80 63 43 20 00 80 7B 5B 20 00 90 6A 47 2A 10 11 2A 44 6E 84 08 24 44 64 88 0A 2A 40 60 80 02 24 48 64 82 95 6E 5F 2E 15 80 71 5B 24 00 04 24 40 64 84 9D 75 55 35 12 84 6C 54 3F 04 99 7A 44 2B 13 85 6F 55 31 09 84 64 44 24 04 81 61 41 21 01 8E 71 5D 35 0C 91 71 5F 20 00 0C 24 42 64 8C 0E 31 4E 71 8E 02 24 44 64 82 04 24 44 60 84 0C 20 4C 64 88 HEX CODE 1F 22 44 68 88 0C 2C 44 68 80 01 22 44 68 90 0C 2C 40 6C 8C HEX CODE 06 28 5E 71 8E 08 34 4D 72 8D 00 20 40 6C 8C 00 20 40 60 9F HEX CODE 1F 30 5E 61 9E 19 3A 44 6B 93 00 20 5F 60 80 0E 35 57 70 8E 80 64 5B 31 00 06 24 48 64 86 91 75 55 35 0A 91 73 55 35 09 00 2C 4C 64 88 1C 24 44 64 9C 88 71 52 34 08 HEX CODE 10 28 44 62 81 06 29 5C 68 9F 80 6D 4E 20 00 84 64 5F 24 04 04 24 5F 64 84 90 68 44 22 01 HEX CODE 0C 2C 48 64 80 0F 34 4E 65 9E HEX CODE 06 2A 5F 62 82 80 60 5B 20 00 0A 3F 4A 7F 8A 80 7C 5A 20 00 HEX CODE 0E 31 4F 62 8C HEX CODE 1E 21 4E 61 9E 1E 21 46 68 9F 8A 7F 4A 3F 0A 88 75 55 36 0C 04 2C 44 64 8E HEX CODE 81 75 5F 35 12 8E 73 55 39 0E HEX CODE HEX CODE 0E 33 55 79 8E HEX CODE 80 69 5F 21 00 HEX CODE HEX CODE 08 35 42 60 80 IDCS5082 *CAUTION: No more than 128 LEDs "on" at one time at 100% brightness. 2006-05-12 14 SCDQ5541P/Q/R, SCDQ5542P/Q/R, SCDQ5543P/Q/R, SCDQ5544P/Q/R User Definable Character Set Examples* (continued) Scientific notations, ect. 00 20 40 60 83 8E 71 51 3E 10 84 6F 48 2F 10 84 6E 5E 2E 04 82 7F 50 30 10 84 62 5F 22 04 84 68 5F 28 04 8E 6E 4E 2E 0E 04 24 55 6E 84 00 3F 5F 7C 80 8E 7F 5B 3F 0E 9F 75 5F 35 1F 8E 6E 4E 2C 0C 80 7F 5F 3F 00 95 6A 55 2A 15 0E 3F 5B 7F 8E 90 68 5F 28 10 8F 7F 5F 20 00 04 2E 5F 6E 80 04 2E 55 64 84 1F 35 5F 75 9F 83 65 49 25 03 82 75 5D 35 02 8F 70 55 2D 02 9C 74 5C 20 00 84 64 52 3A 14 84 64 52 36 0A 84 6E 5F 2E 0E 8A 75 4A 35 0A 87 67 47 2F 0F 0F 32 52 72 8C 0F 28 48 78 88 00 3F 5F 7F 80 15 2A 55 6A 95 00 23 5F 7F 9F 8D 73 50 33 0D 84 6A 5F 2A 04 84 68 4F 28 10 81 7E 42 22 1C 84 64 4A 3E 02 8E 6E 5F 2E 04 83 7F 48 24 00 0A 35 4A 75 8A 00 20 40 67 9F 8E 71 51 2E 11 80 75 52 35 00 97 72 54 34 13 97 74 52 31 17 9F 71 51 31 1F 84 6E 55 24 04 00 3C 5F 63 87 08 2C 4A 78 98 00 24 4A 71 9F 01 2E 5A 6A 8A 1C 34 5C 60 80 0E 2E 4E 6E 8E HEX CODE 0E 24 4E 71 8E 0E 31 51 6A 9B 07 22 59 66 80 04 2F 5F 6F 84 HEX CODE 0C 32 56 71 96 04 2E 55 6E 84 06 21 5A 67 80 04 3E 5F 7E 84 1F 31 51 71 9F 8C 6C 4D 27 03 83 67 4D 2C 0C 04 28 5F 68 84 00 27 4F 78 9C 88 7C 5E 3C 08 84 6E 4F 2E 04 0E 3F 4E 64 80 HEX CODE 0D 32 52 72 8D 01 2E 54 64 84 12 36 5A 67 80 80 60 40 21 01 04 22 5F 62 84 HEX CODE 1C 28 44 78 80 00 2E 5F 6E 84 84 64 55 2E 04 HEX CODE 00 24 4E 7F 8E 09 29 49 6E 90 92 7A 54 20 00 92 76 4A 20 00 18 24 48 7C 80 82 67 4F 27 02 HEX CODE 1F 28 44 68 9F 10 28 44 6A 91 HEX CODE 0E 20 4A 64 8A 81 61 43 23 03 0E 31 5F 71 8E 91 7B 55 31 11 HEX CODE 10 3C 52 72 81 HEX CODE 1F 20 56 79 91 1F 20 59 75 93 8E 75 55 35 0E 9E 68 48 26 01 04 24 48 71 8E HEX CODE 91 6A 44 22 01 84 6E 5F 3F 00 HEX CODE HEX CODE 06 2E 5E 6E 86 HEX CODE 82 65 59 21 02 HEX CODE HEX CODE 15 2E 44 64 84 0C 3C 5C 7C 9C IDCS5083 Foreign characters 04 2A 4E 71 8E 0A 34 52 7A 96 8C 69 49 3A 0C 90 71 57 32 1E 8A 6A 4B 2F 12 84 79 55 32 1E 87 60 50 28 07 81 62 5C 20 00 95 75 55 35 1F 84 75 55 35 06 89 6A 5F 2A 01 91 71 51 3F 01 0E 20 5F 61 8E 08 24 4E 72 8F 86 69 51 29 06 00 2A 5F 74 8B 82 75 4D 27 01 8E 71 5F 35 15 86 6D 46 2D 05 94 7E 55 35 15 8F 73 55 39 1E 04 22 51 71 91 1F 21 5F 61 9F 0F 34 57 74 8F 86 61 49 31 06 86 71 49 21 06 02 24 51 71 8E 01 3E 42 7F 86 04 24 44 68 90 1E 22 42 62 9F 0F 33 55 79 9E 08 24 51 71 8E 95 75 41 22 1C 88 7D 49 3E 08 91 75 52 35 18 81 71 51 31 01 80 65 42 25 18 89 75 56 34 14 0F 30 4F 64 98 88 7F 48 2A 0C 89 6A 4C 3F 08 89 69 4F 29 09 91 71 51 31 1F 84 78 48 2F 08 89 69 5E 28 08 86 6A 52 22 07 8F 74 5F 35 15 92 75 5F 35 0D 0F 34 5F 74 97 82 6D 55 2D 02 80 65 4F 31 00 02 24 4C 64 8E 8C 68 59 29 0E 80 62 44 2F 10 80 75 55 35 01 90 71 51 32 1C 8F 60 5F 21 02 1E 25 4F 74 8F 02 3F 51 62 8C 0F 29 55 63 8C 04 3E 44 6E 95 1F 28 5F 68 87 HEX CODE 1F 21 45 67 8C 19 21 59 62 9C 1F 21 4A 64 9A 01 21 4A 64 8A HEX CODE 08 3F 49 6A 88 0A 3F 4A 62 8C 0E 20 40 60 9F 04 28 51 7F 81 HEX CODE 02 3F 46 6A 92 0F 21 41 61 9F 04 3F 44 64 98 0E 20 4E 60 8F 04 34 54 75 96 87 7A 4A 3A 07 HEX CODE 12 32 52 64 88 0A 2E 51 7F 91 08 28 4C 6A 90 1F 21 41 62 8C 9C 61 42 3C 00 HEX CODE 10 3F 50 70 8F 08 2F 52 62 82 9F 64 42 20 00 85 75 56 34 04 0E 20 5F 64 98 9E 69 49 29 09 HEX CODE 15 35 55 62 8C 0F 29 51 62 8C HEX CODE 00 3F 44 64 9F 8F 72 49 37 00 04 3F 44 7F 84 9C 61 5D 22 1C HEX CODE 08 3F 49 69 92 HEX CODE 04 3F 51 61 86 01 22 46 6A 82 8A 6A 5F 2A 0A 89 7E 48 29 0E 1F 21 46 64 88 HEX CODE 84 79 51 32 1C 94 74 55 36 1C HEX CODE HEX CODE 1F 21 5F 62 84 HEX CODE 90 71 56 34 18 HEX CODE HEX CODE 04 2A 51 71 8E IDCS5084 *CAUTION: No more than 128 LEDs "on" at one time at 100% brightness. 2006-05-12 15 SCDQ5541P/Q/R, SCDQ5542P/Q/R, SCDQ5543P/Q/R, SCDQ5544P/Q/R Revision History: 2006-05-12 Previous Version: 2006-01-23 Page Subjects (major changes since last revision) Date of change all Lead free device 2006-01-23 Published by OSRAM Opto Semiconductors GmbH Wernerwerkstrasse 2, D-93049 Regensburg www.osram-os.com (c) All Rights Reserved. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components1) may only be used in life-support devices or systems2) with the express written approval of OSRAM OS. 1) 2) A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered. 2006-05-12 16