UNIVERSAL
ENCLOSURES
HAND
HELD
CASES
HEAVY
DUTY
ENCLOSURES
DIN
RAIL
BOXES
INTERFACE
SUPPORTS
CONTROL
STATIONS
DIECAST
& METAL
BOXES
DESKTOP &
INSTRUMENT
CASES
POTTING
BOXES
19"
CABINETS
CUSTOM
SIZED
ENCLOSURES
CUSTOM
SERVICES
ELECTRONICS & ENCLOSURES
+44 (0)1638 716101
info@camdenboss.com
www.camdenboss.com
We operate a constant improvement policy,
our products are subject to change without notice.
Ver 1.0
19''
ENCLOSURES
DEVELOPMENT
BOARDS
Material:
• Thickness 3mm: HB Rated
• Carbon Fibre Finish: Acrylic Capped ABS
• Light Pipes: Transparent Acrylic
COLOURS
Carbon Fibre
CB PART NO.
CBDBWA-CAR
No screws – just add your Raspberry Pi lling!
• Designed to house the Raspberry Pi & Wolfson Audio Card via clip-in grooves - NO SCREWS REQUIRED!
• All cut-outs and knock-outs are pre-cut into the case
• Pre-dened microphone sensor slots
• Supplied with four rubber feet
• Supplied with LED light pipes
• High Gloss Finish
• Pi Camera slots can be opened
with a at headed screwdriver
• Pi Camera mount knockout can be opened
with a screwdriver
Wolfson Pi Audio Enclosure
and Raspberry Pi Style Enclosures
Raspberry Pi and Wolfson Audio Card assemblies not included
* Carbon fibre finish:Acrylic capped ABS
Carbon Fibre
RASPBERRY PI STYLE ENCLOSURES
1. Place your Wolfson Pi audio top onto a steady surface.
2. Peel off the protective lm on the light pipes.
4. Ensuring that the light pipes are in the correct orientation as shown, place into the recess and hold for ve
seconds ensuring that the light pipes are perpendicular to the enclosure top.
3. Apply two drops of glue into the larger recess and one drop of glue into the smaller recess
(We recommend using Farnell's Permabond C203 Super Glue )
Light Pipe Assembly