EAO - Your Expert Partner for Human Machine Interfaces EAO Product Information Series 03 Switches and Indicators 03 Contents 03 Description ...................................................................................................... 3 Product Assembly .......................................................................................... 4 Devices raised mounting ............................................................................... 5 Accessories................................................................................................... 13 Technical Data............................................................................................... 21 Typical Applications ..................................................................................... 23 Application guidelines.................................................................................. 24 Marking .......................................................................................................... 25 Drawings........................................................................................................ 26 Index............................................................................................................... 33 2 05.2010 03 Description Specimen order Product Information General notes The pushbuttons of series 03 are noteworthy for the robust design of their case, their operational reliability and the large marking and illuminated area. The pushbuttons contain one or two separately operating snap-action switching elements. The illuminated pushbuttons 03, with two independent lamps, permit different modes of indication. - Indication of two different functions. - Indication in two colours of two different functions. - Enhanced reliability of indication with two lamps. Furthermore, Series 03 can be equipped with two switching systems operating independently or mechanically interlocked. Switches with free choice of bezel The free choice of bezel enables users to match switches to suit different purposes. These bezels protect against unintentional switching. Standard bezels can be optained in black. 0 Illuminated pushbutton : - 03-624.011 1x Illuminiated pushbutton actuator, 24 x 48 mm, 2 change over contacts, momentary action, screw terminal Essential accessories : - 2x Lens halved plastic colourless, transparent 03-943.7 - 2x Holder halved, farblos 03-922.7 - 2x Diffusor plate halved 03-926 - 1x Front bezel flush, black 03-965.0 - 2x Single-LED, T6.8, 24 VAC/DC, white diffuse 10-2K12.1079 We reserve the right to modify technical data All dimensions in mm Mounting The switches, which are pushed into the opening in the panel from the front, are fixed with a plastic sleeve with a maximum effort of 20 Ncm. Lenses The flat lenses, made of polymethyl methacrylate, are obtainable in various colours, as well as transparent and translucent. For Series 03 we can supply lenses in two colours or for separately operated switching mechanisms (2 lenses per switch). Also a number of special lenses are available with special illumination facilities, e.g. for dark rooms. All lenses can be exchanged without affeccting the switch position. Marking For further information about engraving, hot stamping and film inserts see part Marking. Illumination The T5.5 incandescent (filament) lamp (6...48 V, 1.2 W) ensures perfect illumination of the lenses, which are supplied in various colours. T5.5 Single-LED (6, 12, 24, 28, 48 V) are also available in blue, green, red, white or yellow. Luminosity and wave length scattering caused by the technology used in the LED manufacturing processes may lead to visual differences in our products. For supply voltages above 48 V, it is necessary to use a voltage reduction element (external series resistor or transformer). Do not solder the indicators and pushbuttons terminals directly, because of the high surface temperature. Keylock switch Standard lock number is YB1. If the lock number is not specified, we will supply standard number YB1. Additional 9 lock numbers are available on request. Two keys are supplied with each keylock switch. Spare keys for standard locks may be ordered by quoting Typ-Nr. 02-989. Number structure Nomenclature in accordance with ' IEC 60947-5-1 TEST REPORT '. The certification document we dispatch to them on demands. 3 05.2010 03 Product Assembly Pushbutton illuminated, raised mounting 1 2 3 4 0 4 05.2010 Lens Front bezel Switch housing Fixing bezel 03 Devices raised mounting Indicator actuator Essential Accessories: d Diffuser plate one-part page 17 d d d d Front bezel flush page 17 Holder one-part page 16 Lens one-part, uni-colour for pushbutton one-part page 14 Single-LED page 19 Technical drawing Circuit drawing e 2 2 2 1 1 1 2 2 2 0.045 0.045 0.045 Technical drawing Circuit drawing PT 2.8 PT 4.8 ST Mounting dimensions IP 40 a 24 x 48 mm Typ-Nr. 03-021.002 03-021.003 03-021.001 Mounting dimensions Indicator actuator two independent lamp bases Terminals Front protection Continuation see next page e 2 7 1 0.060 Terminals: PT 2.8 = Plug-in terminal 2.8 mm, PT 4.8 = Plug-in terminal 4.8 mm, ST = Screw terminal Mounting dimensions from page 26, Technical drawing from page 26, Circuit drawing from page 30 Buzzer actuator Essential Accessories: d Front bezel raised page 17 Buzzer actuator Operation voltage : 10 ... 50 VAC, 10 ... 75 VDC IP 40 Front cap Plastic black Terminals Front protection Continuation see next page ST a 24 x 48 mm Typ-Nr. 03-810.001 Further information in the Technical Data and Typical Applications Terminals: ST = Screw terminal Mounting dimensions from page 26, Technical drawing from page 26, Circuit drawing from page 30 5 05.2010 03 Devices raised mounting Pushbutton actuator one-part Essential Accessories: d Front bezel flush page 17 d Lens one-part, uni-colour for pushbutton one-part page 14 ST ST ST ST ST Switching system: SA = Snap-action switching element Contacts: C = Changeover Switching action: MA = Maintained action, M = Momentary action, M-MA = Momentary action-Maintained action Terminals: ST = Screw terminal Mounting dimensions from page 26, Technical drawing from page 26, Circuit drawing from page 30 6 05.2010 Circuit drawing 2C MA M MA M M-MA Technical drawing 1C a 24 x 48 mm Typ-Nr. 03-613.011 03-611.011 03-614.011 03-612.011 03-615.011 Mounting dimensions SA Terminals Contacts IP 40 Switching action Switching system Pushbutton actuator one-part Front protection Continuation see next page e 2 2 2 2 2 4 4 4 4 4 7 8 3 9 6 0.055 0.055 0.065 0.065 0.065 03 Devices raised mounting Pushbutton actuator two-part Essential Accessories: d Front bezel flush page 17 d Lens halved for pushbutton two-part page 13 Technical drawing Circuit drawing M-MA e 2 2 2 2 2 2 2 2 2 3 3 4 3 3 4 3 3 4 10 10 10 12 12 12 11 11 11 0.065 0.065 0.065 0.065 0.065 0.065 0.065 0.065 0.065 Circuit drawing M PT 2.8 PT 4.8 ST PT 2.8 PT 4.8 ST PT 2.8 PT 4.8 ST Technical drawing MA Mounting dimensions 2C a 24 x 48 mm Typ-Nr. 03-622.012 03-622.013 03-622.011 03-621.012 03-621.013 03-621.011 03-623.012 03-623.013 03-623.011 Mounting dimensions SA Terminals Contacts IP 40 Switching action Switching system Pushbutton actuator two-part independent changeover Front protection Continuation see next page e 2 2 6 6 10 10 0.075 0.075 Switching system: SA = Snap-action switching element Contacts: C = Changeover Switching action: MA = Maintained action, M = Momentary action, M-MA = Momentary action-Maintained action Terminals: PT 2.8 = Plug-in terminal 2.8 mm, PT 4.8 = Plug-in terminal 4.8 mm, ST = Screw terminal Mounting dimensions from page 26, Technical drawing from page 26, Circuit drawing from page 30 Pushbutton actuator locked mechanically Essential Accessories: d Front bezel flush page 17 d Lens halved for pushbutton locked mechanically page 13 Contacts Switching action IP 40 SA 2C MA Terminals Switching system Pushbutton actuator locked mechanically Front protection Continuation see next page PT 2.8 PT 4.8 a 24 x 48 mm Typ-Nr. 03-629.012 03-629.013 Switching system: SA = Snap-action switching element Contacts: C = Changeover Switching action: MA = Maintained action Terminals: PT 2.8 = Plug-in terminal 2.8 mm, PT 4.8 = Plug-in terminal 4.8 mm Mounting dimensions from page 26, Technical drawing from page 26, Circuit drawing from page 30 7 05.2010 03 Devices raised mounting Illuminated pushbutton actuator one-part Essential Accessories: d Diffuser plate one-part page 17 d d d d Front bezel flush page 17 Holder one-part page 16 Lens one-part, uni-colour for pushbutton one-part page 14 Single-LED page 19 ST ST ST ST ST Switching system: SA = Snap-action switching element Contacts: C = Changeover Switching action: MA = Maintained action, M = Momentary action, M-MA = Momentary action-Maintained action Terminals: ST = Screw terminal Mounting dimensions from page 26, Technical drawing from page 26, Circuit drawing from page 30 8 05.2010 Circuit drawing 2C MA M MA M M-MA Technical drawing 1C a 24 x 48 mm Typ-Nr. 03-618.011 03-616.011 03-619.011 03-617.011 03-620.011 Mounting dimensions SA Terminals Contacts IP 40 Switching action Switching system Illuminated pushbutton actuator one-part two independent lamp bases Front protection Continuation see next page e 2 2 2 2 2 2 2 2 2 2 5 13 4 15 14 0.070 0.070 0.075 0.075 0.075 03 Devices raised mounting Illuminated pushbutton actuator two-part Essential Accessories: d Diffuser plate halved page 16 d d d d Front bezel flush page 17 Holder halved page 16 Lens halved for pushbutton two-part page 13 Single-LED page 19 two independent lamp bases independent changeover IP 40 SA 2C MA M MA M M-MA ST ST ST ST ST Circuit drawing 1C Technical drawing SA a 24 x 48 mm Typ-Nr. 03-628.011 03-627.011 03-625.011 03-624.011 03-626.011 Mounting dimensions Contacts IP 40 Terminals Switching system Illuminated pushbutton actuator two-part two independent lamp bases Switching action Front protection Continuation see next page e 2 2 2 2 2 2 2 2 2 2 5 13 16 18 17 0.075 0.075 0.080 0.080 0.080 Switching system: SA = Snap-action switching element Contacts: C = Changeover Switching action: MA = Maintained action, M = Momentary action, M-MA = Momentary action-Maintained action Terminals: ST = Screw terminal Mounting dimensions from page 26, Technical drawing from page 26, Circuit drawing from page 30 9 05.2010 03 Devices raised mounting Mushroom-pushbutton actuator Essential Accessories: d Front bezel flush page 17 d Mushroom-head cap page 16 ST ST ST ST ST Switching system: SA = Snap-action switching element Contacts: C = Changeover Switching action: MA = Maintained action, M = Momentary action, M-MA = Momentary action-Maintained action Terminals: ST = Screw terminal Mounting dimensions from page 26, Technical drawing from page 26, Circuit drawing from page 30 10 05.2010 Circuit drawing 2C MA M MA M M-MA Technical drawing 1C a 24 x 48 mm Typ-Nr. 03-613.011 03-611.011 03-614.011 03-612.011 03-615.011 Mounting dimensions SA Terminals Contacts IP 40 Switching action Switching system Mushroom-pushbutton actuator Front protection Continuation see next page e 2 2 2 2 2 5 5 5 5 5 5 13 4 15 14 0.055 0.055 0.065 0.065 0.065 03 Devices raised mounting Keylock switch actuator 2 positions Note: The keylock front bezel of the switch types 03-198.011 and 03-695.01x are factory-assembled and do not have to be ordered separately. Essential Accessories: d Front bezel flush page 17 d Keylock front bezel page 16 Technical drawing Circuit drawing 03-690.012 03-690.013 03-690.011 03-691.012 03-691.013 03-691.011 03-198.011 2 2 2 2 2 2 2 10 10 11 10 10 11 11 19 19 19 19 19 19 19 0.065 0.065 0.065 0.065 0.065 0.065 0.065 03-695.012 03-695.013 03-695.011 2 2 2 10 10 11 19 19 19 0.065 0.065 0.065 Keylock switch actuator 2 positions Position A : lockable, actuated or non-actuated Standard lock YB1 Front plastic grey Position A : lockable, actuated Standard lock YB1 Front plastic grey IP 40 M-MA SA 2C A PT 2.8 PT 4.8 ST a 24 x 48 mm Typ-Nr. 03-692.012 03-692.013 03-692.011 IP 40 M-MA SA 2C A Position A : lockable, non-actuated Standard lock YB1 Front plastic grey IP 40 M-MA SA 2C A Position A : lockable, actuated or non-actuated Standard lock YB1 Front plastic grey (usable with Protective cover Typ-Nr. 03-925) Position A : lockable, non-actuated Position C : actuated, key not removeable Standard lock YB1 Front plastic grey IP 40 M-MA SA 2C A PT 2.8 PT 4.8 ST PT 2.8 PT 4.8 ST ST IP 40 M-MA SA 2C A PT 2.8 PT 4.8 ST Terminals Key remove 0.065 0.065 0.065 Contacts 19 19 19 Switching system 10 10 11 Switching action e 2 2 2 Front protection Mounting dimensions Continuation see next page 0 After turning the key 90 clockwise, the switch can be operated. In the unlocked positions the switch always performs a momentary action. Other lock numbers on request Switching action: M-MA = Momentary action-Maintained action Switching system: SA = Snap-action switching element Contacts: C = Changeover Terminals: PT 2.8 = Plug-in terminal 2.8 mm, PT 4.8 = Plug-in terminal 4.8 mm, ST = Screw terminal Mounting dimensions from page 26, Technical drawing from page 26, Circuit drawing from page 30 11 05.2010 03 Devices raised mounting Mushroom-head keylock switch 2 positions Contacts Terminals Key remove M-MA SA 2C ST A Switching action: M-MA = Momentary action-Maintained action Switching system: SA = Snap-action switching element Contacts: C = Changeover Terminals: ST = Screw terminal Mounting dimensions from page 26, Technical drawing from page 26, Circuit drawing from page 30 12 05.2010 Circuit drawing Switching system Mushroom-head keylock switch 2 positions Position A : lockable, actuated Standard lock YB1 Mushroom-head cap plastic red a 24 x 48 mm Typ-Nr. 03-199.011 Technical drawing Switching action IP 40 0 Mounting dimensions Front protection Continuation see next page e 2 12 19 0.065 03 Accessories Front Lens halved for pushbutton two-part Order 2 lenses Continuation see next page Lens halved for pushbutton two-part 18 x 19 mm, illuminative (not recommended for film insert), ribbed 18 x 19 mm, illuminative (use Holder for film insert) 18 x 19 mm, non-illuminative 18 x 38 mm, illuminative with black rim (prevents lateral light escape), (use Holder for film insert) Lens Plastic blue translucent Plastic colourless translucent Plastic green translucent Plastic orange translucent Plastic red translucent Plastic smoked translucent Plastic white translucent Plastic yellow translucent Plastic colourless transparent a 24 x 48 mm Typ-Nr. 03-921.6 03-921.7 03-921.5 03-921.3 03-921.2 03-921.1 03-921.9 03-921.4 03-943.7 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 Plastic black opaque Plastic grey opaque Plastic colourless transparent Plastic smoked transparent 03-921.0 03-921.8 03-953.7 03-954.1 0.005 0.005 0.005 0.005 a 24 x 48 mm Typ-Nr. 03-923.6 03-923.7 03-923.5 03-923.3 03-923.2 03-923.9 03-923.4 03-923.0 03-923.8 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 0.003 e Lens halved for pushbutton locked mechanically Order 2 lenses Continuation see next page Lens halved for pushbutton locked mechanically 18 x 19 mm, illuminative (not recommended for film insert), ribbed 18 x 19 mm, non-illuminative Lens Plastic blue translucent Plastic colourless transparent Plastic green translucent Plastic orange translucent Plastic red translucent Plastic white translucent Plastic yellow translucent Plastic black opaque Plastic grey opaque e 13 05.2010 03 Accessories Lens one-part, uni-colour for pushbutton one-part Continuation see next page Lens one-part, uni-colour for pushbutton one-part 18 x 38 mm, illuminative (not recommended for film insert), ribbed 18 x 38 mm, illuminative (use Holder for film insert) 18 x 38 mm, illuminative with black rim (prevents lateral light escape), (use Holder for film insert) 18 x 38 mm, non-illuminative 14 05.2010 Lens Plastic blue translucent Plastic colourless translucent Plastic green translucent Plastic orange translucent Plastic red translucent Plastic smoked translucent Plastic white translucent Plastic yellow translucent Plastic colourless transparent a 24 x 48 mm Typ-Nr. 03-901.6 03-901.7 03-901.5 03-901.3 03-901.2 03-901.1 03-901.9 03-901.4 03-941.7 0.009 0.009 0.009 0.009 0.009 0.009 0.009 0.009 0.009 Plastic colourless transparent Plastic smoked transparent 03-946.7 03-947.1 0.009 0.009 Plastic black opaque Plastic grey opaque 03-901.0 03-901.8 0.009 0.009 e 03 Accessories Lens one-part, bi-colour for pushbutton one-part Continuation see next page Lens one-part, bi-colour for pushbutton one-part 18 x 38 mm, illuminative with black rim (prevents lateral light escape), (use Holder for film insert) 18 x 38 mm, illuminative with light barrier (not recommended for film insert), ribbed 18 x 38 mm, illuminative with light barrier (use Holder for film insert) 18 x 38 mm, non-illuminative, ribbed Lens Plastic colourless-colourless transparent Plastic smoked-smoked transparent a 24 x 48 mm Typ-Nr. 03-951.7/7 03-952.1/1 0.010 0.010 Plastic black-blue opaque-translucent Plastic black-colourless opaque-translucent Plastic black-green opaque-translucent Plastic black-orange opaque-translucent Plastic black-red opaque-translucent Plastic black-yellow opaque-translucent Plastic blue-blue translucent Plastic blue-colourless translucent Plastic blue-white translucent Plastic colourless-colourless translucent Plastic colourless-white translucent Plastic green-blue translucent Plastic green-colourless translucent Plastic green-green translucent Plastic green-white translucent Plastic grey-blue opaque-translucent Plastic grey-colourless opaque-translucent Plastic grey-green opaque-translucent Plastic grey-orange opaque-translucent Plastic grey-red opaque-translucent Plastic grey-yellow opaque-translucent Plastic orange-blue translucent Plastic orange-colourless translucent Plastic orange-green translucent Plastic orange-orange translucent Plastic orange-white translucent Plastic orange-yellow translucent Plastic red-blue translucent Plastic red-colourless translucent Plastic red-green translucent Plastic red-orange translucent Plastic red-red translucent Plastic red-white translucent Plastic red-yellow translucent Plastic smoked-smoked translucent Plastic yellow-blue translucent Plastic yellow-colourless translucent Plastic yellow-green translucent Plastic yellow-weiss translucent Plastic yellow-yellow translucent Plastic black-white opaque-translucent Plastic colourless-colourless transparent Plastic grey-white opaque-translucent Plastic white-white translucent Plastic black-black opaque Plastic black-grey opaque Plastic grey-grey opaque 03-902.0/6 03-902.0/7 03-902.0/5 03-902.0/3 03-902.0/2 03-902.0/4 03-902.6/6 03-902.6/7 03-902.6/9 03-902.7/7 03-902.7/9 03-902.5/6 03-902.5/7 03-902.5/5 03-902.5/9 03-902.6/8 03-902.7/8 03-902.5/8 03-902.3/8 03-902.2/8 03-902.4/8 03-902.3/6 03-902.3/7 03-902.3/5 03-902.3/3 03-902.3/9 03-902.3/4 03-902.2/6 03-902.2/7 03-902.2/5 03-902.2/3 03-902.2/2 03-902.2/9 03-902.2/4 03-902.1/1 03-902.4/6 03-902.4/7 03-902.4/5 03-902.4/9 03-902.4/4 03-902.0/9 03-942.7/7 03-902.8/9 03-902.9/9 03-902.0/0 03-902.0/8 03-902.8/8 0.010 0.010 0.010 0.010 0.010 0.010 0.010 0.010 0.010 0.010 0.010 0.010 0.010 0.010 0.010 0.010 0.010 0.010 0.010 0.010 0.010 0.010 0.010 0.010 0.010 0.010 0.010 0.010 0.010 0.010 0.010 0.010 0.010 0.010 0.010 0.010 0.010 0.010 0.010 0.010 0.010 0.010 0.010 0.010 0.010 0.010 0.010 e 15 05.2010 03 Accessories Mushroom-head cap use Front bezel flush Continuation see next page Mushroom-head cap Mushroom had cap Plastic black opaque Plastic green opaque Plastic red opaque Plastic yellow opaque a 24 x 48 mm Typ-Nr. 03-930.0 03-930.5 03-930.2 03-930.4 e 0.018 0.018 0.018 0.018 Keylock front bezel Continuation see next page Keylock front bezel Keylock switch Typ-Nr. 03-690, 03-691, 03-692 Keylock switch Typ-Nr. 03-695 e Keylock front bezel Plastic grey Typ-Nr. 03-980.1 0.010 Plastic grey 03-982.1 0.010 Holder Plastic blue translucent Plastic colourless translucent Plastic green translucent Plastic orange translucent Plastic red translucent Plastic white translucent Plastic yellow translucent Typ-Nr. 03-922.6 03-922.7 03-922.5 03-922.3 03-922.2 03-922.9 03-922.4 0.001 0.001 0.001 0.001 0.001 0.001 0.001 Typ-Nr. 03-908.6 03-908.7 03-908.5 03-908.3 03-908.2 03-908.9 03-908.4 0.001 0.001 0.001 0.001 0.001 0.001 0.001 Typ-Nr. 03-926 0.001 Standard lock YB1, other lock numbers on request Holder halved for use with film insert; order 2 Holders Continuation see next page Holder halved for Lens halved : Typ-Nr. 03-943.7 for Lens one-part, two-coloured : Typ-Nr. 03-951.7/7 and 03-952.1/1 e Holder one-part for use with film insert Continuation see next page Holder one-part for Lens one-part, unicoloured : Typ-Nr. 03-941.7, 03-946.7 and 03-947.1 Holder Plastic blue translucent Plastic colourless translucent Plastic green translucent Plastic orange translucent Plastic red translucent Plastic white translucent Plastic yellow translucent e Diffuser plate halved for film insert; order 2 Diffuser plates Continuation see next page Diffuser plate halved for Lens halved and Lens one-part, two-coloured Lettering only visible when illuminated 16 05.2010 e 03 Accessories Diffuser plate one-part for film insert Continuation see next page Diffuser plate one-part for Lens one-part, unicoloured Lettering only visible when illuminated e Typ-Nr. 03-909 0.001 a 24 x 48 mm Typ-Nr. 03-965.0 0.001 a 24 x 48 mm Typ-Nr. 03-967.0 0.001 Typ-Nr. 03-907 0.002 Front bezel flush Continuation see next page Front bezel flush Front bezel Plastic black e Front bezel raised Continuation see next page Front bezel raised Lens only removable with Lens remover Typ-Nr. 98-969 Front bezel Plastic black e Light barrier Continuation see next page Light barrier e Protective cover use with Front bezel flush Typ-Nr. 03-965.0 Protective cover hinged, transparent, with means for sealing a 24 x 48 mm Typ-Nr. 03-925 Technical drawing Continuation see next page e 8 0.001 Technical drawing from page 26 17 05.2010 03 Accessories Sprayproof cover use Front bezel flush IP 65 Technical drawing Sprayproof cover three-part, PVC (-20 C ... +60 C) a 24 x 48 mm Typ-Nr. 03-924 Mounting dimensions Front protection Continuation see next page e 1 9 0.005 Mounting dimensions from page 26, Technical drawing from page 26 Blind plug Blind plug Plastic black Plastic grey Blind plug a 24 x 48 mm Typ-Nr. 03-949.0 03-949.8 Mounting dimensions Continuation see next page e 2 2 0.005 0.005 Mounting dimensions from page 26 Spare key Continuation see next page Spare key Standard lock YB1 e Typ-Nr. 02-989.001 0.001 Typ-Nr. 03-929 0.007 Other lock numbers on request > Backside Terminal cover Continuation see next page Terminal cover all connection methods 18 05.2010 e 03 Accessories > Illumination Filament lamp order 2 Filament lamps Continuation see next page Socket T6.8 Filament lamp Operating voltage/-current 12 VAC/DC, 100 mA 12 VAC/DC, 50 mA 24 VAC/DC, 25 mA 24 VAC/DC, 50 mA 28 VAC/DC, 40 mA 30 VAC/DC, 40 mA 36 VAC/DC, 35 mA 48 VAC/DC, 25 mA 6 VAC/DC, 200 mA e Typ-Nr. 10-1209.1329 10-1209.1279 10-1212.1199 10-1212.1279 10-1213.1249 10-1214.1249 10-1216.1229 10-1219.1199 10-1206.1369 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 Typ-Nr. 10-2K09.1076 10-2K12.1076 10-2K13.1076 10-2K19.1056 10-2K06.3156 10-2K09.1075 10-2K12.1075 10-2K13.1075 10-2K19.1055 10-2K06.3155 10-2K09.1072 10-2K12.1072 10-2K13.1072 10-2K19.1052 10-2K06.3152 10-2K09.1079 10-2K12.1079 10-2K13.1079 10-2K19.1059 10-2K06.3159 10-2K09.1074 10-2K12.1074 10-2K13.1074 10-2K19.1054 10-2K06.3154 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 0.002 Single-LED order 2 LED's Continuation see next page Single-LED Socket T6.8 Light colour blue green red white diffuse yellow Operating voltage/-current 12 VAC/DC, 9/17 mA 24 VAC/DC, 9/17 mA 28 VAC/DC, 9/17 mA 48 VAC/DC, 4/8 mA 6 VDC, 17 mA 12 VAC/DC, 4/7 mA 24 VAC/DC, 4/7 mA 28 VAC/DC, 4/7 mA 48 VAC/DC, 2/4 mA 6 VDC, 7 mA 12 VAC/DC, 9/17 mA 24 VAC/DC, 9/17 mA 28 VAC/DC, 9/17 mA 48 VAC/DC, 4/8 mA 6 VDC, 17 mA 12 VAC/DC, 9/17 mA 24 VAC/DC, 9/17 mA 28 VAC/DC, 9/17 mA 48 VAC/DC, 4/8 mA 6 VDC, 17 mA 12 VAC/DC, 9/17 mA 24 VAC/DC, 9/17 mA 28 VAC/DC, 9/17 mA 48 VAC/DC, 4/8 mA 6 VDC, 17 mA e Note: AC operation through halve-wave rectifier possible, slight flickering can occure. 19 05.2010 03 Accessories Series resistor for lamp voltage reduction Continuation see next page Series resistor 10 k, for filament lamp 48 VAC, 25 mA 2.7 k, for filament lamp 48 VAC, 25 mA 3.3 k, for filament lamp 48 VAC, 25 mA 4.7 k, for filament lamp 48 VAC, 25 mA e Operating voltage 230/240 V Typ-Nr. 02-904.7 0.003 110 V 125 V 145 V 02-904.0 02-904.1 02-904.3 0.003 0.003 0.003 Typ-Nr. 02-912.2 0.045 02-912.3 02-912.4 02-912.1 0.090 0.095 0.025 Typ-Nr. 02-905 0.011 98-968 0.004 Typ-Nr. 61-9740.0 0.003 03-996 0.027 Please keep to the country specific security rules. Terminal plate empty for fitting with series resistors Continuation see next page Terminal plate empty 10 spaces 125 x 60 x 15 mm 15 spaces 187.5 x 60 x 15 mm 20 spaces 250 x 60 x 15 mm 5 spaces 62.5 x 60 x 15 mm e > Assembling Lens remover Continuation see next page Lens remover for flush front bezel for raised front bezel e Lamp remover Continuation see next page Lamp remover Filament lamp LED CAUTION A switching process might be released when replacing the Lamp/LED ! 20 05.2010 e 03 Technical Data Switch rating 400 VAC, 10 A, cos 0.95, as per IEC 60947-5-1 250 VAC, 10 A, as per UL Actuator with snap-action switching element Switching system Electric strength 2500 VAC, 50 Hz, 1 min. between all terminals and earth, as per IEC 60947-5-1 1 or 2 self-cleaning, snap-action switching elements. 1 or 2 double-throw contacts. Material Environmental conditions Material of contact Standard version: Silver (U >20 V) Special versions: (on request) Gold/Silver 700 Au/300 Ag (U <50 V) Silver/Palladium 700 Ag/300 Pd (U >20 V) for atmospheres containing sulphur Storage temperature -30 C ... +85 C Switch housing Thermosetting material, heat-resistant Protection degree Front side IP 40, IP 65 with spray cover, as per IEC 60529 Indicator housing Polyamide Vibration resistance 10 g at 10-2000 Hz, amplitude 1.0 mm, as per IEC 60068-2-6 Mechanical characteristics Service temperature -25 C ... +55 C For indicators and illuminated pushbuttons mounted as a block, make sure the heat can escape freely. Approvals Terminals Screw terminal (with self-lifting clip): max. wire cross-section, 2 x 2.5 mm max. wire cross-section of stranded cable, 2 x 1.5 mm Plug-in terminal 2.8 x 0.8 mm: max. wire cross-section of stranded cable, 1 mm can also be used as soldering terminal max. wire cross-section, 2 x 1 mm max. wire cross-section of stranded cable: 2 x 0.75 mm Approbations CB (IEC 60947-5-1) CSA Germanischer Lloyd UL Declaration of conformity CE > Buzzer Plug-in terminal 4.8 x 0.8 mm: max. wire cross-section of stranded cable, 2.5 mm can also be used as soldering terminal max. wire cross-section: 2 x 1mm max. wire cross-section of stranded cable, 2 x 0.75 mm Buzzer system Actuating force 6 N ... 12 N Material Actuating travel 5 mm Mechanical lifetime Momentary action 2 million operations Maintained action 1 million operations Storage temperature -30 C ... +85 C Electrical characteristics System Contactless electronic buzzer with IC oscillator Alarm buzzer case Duroplastic Front cap Polycarbonate (PC) Front bezel Polymethylacrylate Mechanical characteristics Terminals Screw terminal Standards The switches comply with the "Standards for low-voltage switching devices" IEC 60947-5-1 Operating temperature -25 C ... +55 C Rated insulation voltage 400 VAC/440 VDC, as per IEC 60947-5-1 Storage temperature -40 C ... +85 C Conventional free air thermal current 10 A The maximum current in continuous operation and at ambient temperature not exceeding the quoted maximum values. Front protection IP 40 21 05.2010 Technical Data Electrical characteristics Frequency (tone) Approx. 2.8 kHz Sound pressure 85 dB (A) 8 dB at a distance of 0.1 m Volume variable with a 1 M potentiometer or corresponding fixed resistor Operation Voltage/Current typical 0 10 ... 55 VAC 25 mA 10 ... 75 VDC 15 mA Approvals Approbations CB (IEC 60947-5-1) Declaration of conformity CE 22 05.2010 03 03 Typical Applications Buzzer c f c f c f c f d g d g d g d g e h e h e h e h U U 0 1. Supply voltage I 2. Supply voltage II 3. Intermittent tone Continous tone Continous tone Interval approx. 3 Hz U = 10 - 35 VAC U = 35 - 55 VAC U = 10 - 50 VDC U = 35 - 75 VDC 4. Volume control 23 05.2010 03 Application guidelines Suppressor circuits When switching inductive loads such as relays, DC motors, and DC solenoids, it is always important to absorb surges (e.g. with a diode) to protect the contacts. When these inductive loads are switched off, a counter emf can severely damage switch contacts and greatly shorten lifetime. Fig. 1 shows an inductive load with a free-wheeling diode connected in parallel. This free-wheeling diode provides a path for the inductor current to flow when the current is interrupted by the switch. Without this free-wheeling diode, the voltage across the coil will be limited only by dielectric breakdown voltages of the circuit or parasitic elements of the coil. This voltage can be kilovolts in amplitude even when nominal circuit voltages are low (e.g. 12 VDC) see Fig. 2. The free-wheeling diode should be chosen so that the reverse breakdown voltage is greater than the voltage driving the inductive load. The DC blocking voltage (VR) of the free-wheeling diode can be found in the datasheet of a diode. The forward current should be equal or greater than the maximum current flowing through the load. To get an efficient protection, the free-wheeling diode must be connected as close as possible to the inductive load! 0 Counter emf over load without free-wheeling diode Fig. 2 Switching with inductive load Fig. 1 Switch ON OFF 0 VDC + _ Free-wheeling diode 24 05.2010 Inductive load Sveral hundred to several thousend volts e=L di __ dt 03 Marking General notes 0 1. Engraving In addition to the most commonly used world languages, in DIN 1451-3 close spacing, other typefaces are available as Scandinavian, Slavic, Greek, Russian and Polish. Red, blue and black lenses are filled with white colour. Other colour lenses are filled in black. Standard height of letters is 3 mm. If the height is not specified, we will supply 3 mm engraved letters. 2. Hot stamping For larger series it is worth considering markings by means of hot stamping We will pleased to advise you. For letters and figures, typefaces with 2.5 mm, 3 mm and 4 mm are available. 3. Film inserts Instead of using engraving the lenses can be fitted with transparent film inserts, as an alternative. For this purpose, though, it is advisible to use lenses without ripped pattern. In the case of use of a smoke-black lens the fitted film becomes readable only if the lamp is on. The film (F) is inserted in the cap. To ensure even illumination a diffusor (D) is recommended, which is inserted beneath the film. If, on the other hand, the diffusor is inserted above the film, the lettering only becomes legible when the lamp is alight. To hold the film and diffusor in position, the use of a holder (N) is advised. The film thickness is 0.2 mm. All dimensions in mm 0 Lens size 18 x 19 18 x 38 Film insert max. size 14.3 x 15.6 14.3 x 34.3 Height of letters h 3 Number of lines 4 Number of (target value) capital letters per line 7-8 Number of (target value) small letters per line 9 - 10 4 2 5 6 5 2 4 4 6 1 3 4 8 1 2 2 3 4 8 2 4 2 4 1 3 1 2 16 6 11 4 8 3 7 3 5 2 18 8 13 5 10 4 9 3 6 2 4 5 6 8 0 D N ABC abc B2 h B1 F ABC abc B3 ABC abc B4 ABC abc 25 05.2010 Image B3 B4 B3 B4 B3 B4 B3 B4 B3 B4 B1 B2 B1 B2 B1 B2 B1 B2 B1 B2 03 Drawings Mounting dimensions 22 8 22 1 Sprayproof cover page 18 42 12 42 21.2 + 0.2 0 24 min. 2 Indicator actuator page 5 | Buzzer actuator page 5 | Pushbutton actuator one-part page 6 | Pushbutton actuator two-part page 7 | Pushbutton actuator locked mechanically page 7 | Illuminated pushbutton actuator one-part page 8 | Illuminated pushbutton actuator two-part page 9 | Mushroom-pushbutton actuator page 10 | Keylock switch actuator 2 positions page 11 | Mushroom-head keylock switch 2 positions page 12 | Blind plug page 18 41.2 +0.2 0 48 min. Technical drawing 21 24 1 Indicator actuator page 5 10 max. 41 7 60 26 05.2010 49.6 48 03 Drawings 21 24 2 Illuminated pushbutton actuator one-part page 8 | Illuminated pushbutton actuator two-part page 9 10 max. 41 7 49.6 48 75 84 21 24 3 Pushbutton actuator two-part page 7 10 max. 41 7 49.6 48 75 21 24 4 Pushbutton actuator one-part page 6 | Pushbutton actuator two-part page 7 10 max. 7 49.6 41 48 75 84 27 05.2010 03 Drawings 21 24 5 Mushroom-pushbutton actuator page 10 10 max. 41 16 49.6 48 75 84 21 24 6 Pushbutton actuator locked mechanically page 7 10 max. 41 10 49.6 48 75 21 24 7 Buzzer actuator page 5 10 max. 7 49.6 41 48 75 84 8 Protective cover page 17 38 16.7 35 24 48 28 05.2010 10.5 03 Drawings 30 9 Sprayproof cover page 18 54 9.5 10 Keylock switch actuator 2 positions page 11 C A 10 max. 49.6 48 41 10 24 21 A = Basic position 75 11 Keylock switch actuator 2 positions page 11 C A 10 max. 49.6 48 41 10 24 21 A = Basic position 75 12 Mushroom-head keylock switch 2 positions page 12 C A 10 max. 49.6 48 41 17 24 21 A = Basic position 75 29 05.2010 03 Drawings Circuit drawing 1 Buzzer actuator page 5 c d f e g h 2 Indicator actuator page 5 1 3 2 4 3 Pushbutton actuator one-part page 6 d e g c f h 4 Illuminated pushbutton actuator one-part page 8 | Mushroom-pushbutton actuator page 10 d e g c f 1 3 h 2 4 5 Illuminated pushbutton actuator one-part page 8 | Illuminated pushbutton actuator two-part page 9 | Mushroom-pushbutton actuator page 10 g f 1 3 h 2 4 6 Pushbutton actuator one-part page 6 d e c g f h 7 Pushbutton actuator one-part page 6 d e c 8 Pushbutton actuator one-part page 6 d e c 30 05.2010 03 Drawings 9 Pushbutton actuator one-part page 6 d e g c f h 10 Pushbutton actuator two-part page 7 | Pushbutton actuator locked mechanically page 7 d e g f c h 11 Pushbutton actuator two-part page 7 d e g c f h 12 Pushbutton actuator two-part page 7 d e g c f h 13 Illuminated pushbutton actuator one-part page 8 | Illuminated pushbutton actuator two-part page 9 | Mushroom-pushbutton actuator page 10 d e 1 3 c 2 4 14 Illuminated pushbutton actuator one-part page 8 | Mushroom-pushbutton actuator page 10 d e g c f 1 3 h 2 4 15 Illuminated pushbutton actuator one-part page 8 | Mushroom-pushbutton actuator page 10 d e c g f 1 3 h 2 4 16 Illuminated pushbutton actuator two-part page 9 d e c g f 1 3 h 2 4 31 05.2010 03 Drawings 17 Illuminated pushbutton actuator two-part page 9 d e g c f 1 3 h 2 4 18 Illuminated pushbutton actuator two-part page 9 d e g c f 1 3 h 2 4 19 Keylock switch actuator 2 positions page 11 | Mushroom-head keylock switch 2 positions page 12 d e c 32 05.2010 g f h Index from Typ-Nr. Typ-Nr. Page 02-904.0 ..................................... 20 02-904.1 ..................................... 20 02-904.3 ..................................... 20 02-904.7 ..................................... 20 02-905 ........................................ 20 02-912.1 ..................................... 20 02-912.2 ..................................... 20 02-912.3 ..................................... 20 02-912.4 ..................................... 20 02-989.001 ................................. 18 03-021.001 ................................... 5 03-021.002 ................................... 5 03-021.003 ................................... 5 03-198.011 ................................. 11 03-199.011 ................................. 12 03-611.011 ................................. 10 03-611.011 ................................... 6 03-612.011 ................................. 10 03-612.011 ................................... 6 03-613.011 ................................. 10 03-613.011 ................................... 6 03-614.011 ................................. 10 03-614.011 ................................... 6 03-615.011 ................................. 10 03-615.011 ................................... 6 03-616.011 ................................... 8 03-617.011 ................................... 8 03-618.011 ................................... 8 03-619.011 ................................... 8 03-620.011 ................................... 8 03-621.011 ................................... 7 03-621.012 ................................... 7 03-621.013 ................................... 7 03-622.011 ................................... 7 03-622.012 ................................... 7 03-622.013 ................................... 7 03-623.011 ................................... 7 03-623.012 ................................... 7 03-623.013 ................................... 7 03-624.011 ................................... 9 03-625.011 ................................... 9 03-626.011 ................................... 9 03-627.011 ................................... 9 03-628.011 ................................... 9 03-629.012 ................................... 7 03-629.013 ................................... 7 03-690.011 ................................. 11 03-690.012 ................................. 11 03-690.013 ................................. 11 03-691.011 ................................. 11 03-691.012 ................................. 11 03-691.013 ................................. 11 03-692.011 ................................. 11 03-692.012 ................................. 11 03-692.013 ................................. 11 03-695.011 ................................. 11 03-695.012 ................................. 11 03-695.013 ................................. 11 03-810.001 ................................... 5 03-901.0 ..................................... 14 03-901.1 ..................................... 14 03-901.2 ..................................... 14 03-901.3 ..................................... 14 Typ-Nr. Page 03-901.4 ..................................... 14 03-901.5 ..................................... 14 03-901.6 ..................................... 14 03-901.7 ..................................... 14 03-901.8 ..................................... 14 03-901.9 ..................................... 14 03-902.0/0 .................................. 15 03-902.0/2 .................................. 15 03-902.0/3 .................................. 15 03-902.0/4 .................................. 15 03-902.0/5 .................................. 15 03-902.0/6 .................................. 15 03-902.0/7 .................................. 15 03-902.0/8 .................................. 15 03-902.0/9 .................................. 15 03-902.1/1 .................................. 15 03-902.2/2 .................................. 15 03-902.2/3 .................................. 15 03-902.2/4 .................................. 15 03-902.2/5 .................................. 15 03-902.2/6 .................................. 15 03-902.2/7 .................................. 15 03-902.2/8 .................................. 15 03-902.2/9 .................................. 15 03-902.3/3 .................................. 15 03-902.3/4 .................................. 15 03-902.3/5 .................................. 15 03-902.3/6 .................................. 15 03-902.3/7 .................................. 15 03-902.3/8 .................................. 15 03-902.3/9 .................................. 15 03-902.4/4 .................................. 15 03-902.4/5 .................................. 15 03-902.4/6 .................................. 15 03-902.4/7 .................................. 15 03-902.4/8 .................................. 15 03-902.4/9 .................................. 15 03-902.5/5 .................................. 15 03-902.5/6 .................................. 15 03-902.5/7 .................................. 15 03-902.5/8 .................................. 15 03-902.5/9 .................................. 15 03-902.6/6 .................................. 15 03-902.6/7 .................................. 15 03-902.6/8 .................................. 15 03-902.6/9 .................................. 15 03-902.7/7 .................................. 15 03-902.7/8 .................................. 15 03-902.7/9 .................................. 15 03-902.8/8 .................................. 15 03-902.8/9 .................................. 15 03-902.9/9 .................................. 15 03-907 ........................................ 17 03-908.2 ..................................... 16 03-908.3 ..................................... 16 03-908.4 ..................................... 16 03-908.5 ..................................... 16 03-908.6 ..................................... 16 03-908.7 ..................................... 16 03-908.9 ..................................... 16 03-909 ........................................ 17 03-921.0 ..................................... 13 03-921.1 ..................................... 13 Typ-Nr. Page 03-921.2 ..................................... 13 03-921.3 ..................................... 13 03-921.4 ..................................... 13 03-921.5 ..................................... 13 03-921.6 ..................................... 13 03-921.7 ..................................... 13 03-921.8 ..................................... 13 03-921.9 ..................................... 13 03-922.2 ..................................... 16 03-922.3 ..................................... 16 03-922.4 ..................................... 16 03-922.5 ..................................... 16 03-922.6 ..................................... 16 03-922.7 ..................................... 16 03-922.9 ..................................... 16 03-923.0 ..................................... 13 03-923.2 ..................................... 13 03-923.3 ..................................... 13 03-923.4 ..................................... 13 03-923.5 ..................................... 13 03-923.6 ..................................... 13 03-923.7 ..................................... 13 03-923.8 ..................................... 13 03-923.9 ..................................... 13 03-924 ........................................ 18 03-925 ........................................ 17 03-926 ........................................ 16 03-929 ........................................ 18 03-930.0 ..................................... 16 03-930.2 ..................................... 16 03-930.4 ..................................... 16 03-930.5 ..................................... 16 03-941.7 ..................................... 14 03-942.7/7 .................................. 15 03-943.7 ..................................... 13 03-946.7 ..................................... 14 03-947.1 ..................................... 14 03-949.0 ..................................... 18 03-949.8 ..................................... 18 03-951.7/7 .................................. 15 03-952.1/1 .................................. 15 03-953.7 ..................................... 13 03-954.1 ..................................... 13 03-965.0 ..................................... 17 03-967.0 ..................................... 17 03-980.1 ..................................... 16 03-982.1 ..................................... 16 03-996 ........................................ 20 10-1206.1369 ............................. 19 10-1209.1279 ............................. 19 10-1209.1329 ............................. 19 10-1212.1199 ............................. 19 10-1212.1279 ............................. 19 10-1213.1249 ............................. 19 10-1214.1249 ............................. 19 10-1216.1229 ............................. 19 10-1219.1199 ............................. 19 10-2K06.3152 ............................. 19 10-2K06.3154 ............................. 19 10-2K06.3155 ............................. 19 10-2K06.3156 ............................. 19 10-2K06.3159 ............................. 19 10-2K09.1072 ............................. 19 33 05.2010 Index from Typ-Nr. Typ-Nr. Page 10-2K09.1074 .............................19 10-2K09.1075 .............................19 10-2K09.1076 .............................19 10-2K09.1079 .............................19 10-2K12.1072 .............................19 10-2K12.1074 .............................19 10-2K12.1075 .............................19 10-2K12.1076 .............................19 10-2K12.1079 .............................19 10-2K13.1072 .............................19 10-2K13.1074 .............................19 10-2K13.1075 .............................19 10-2K13.1076 .............................19 10-2K13.1079 .............................19 10-2K19.1052 .............................19 10-2K19.1054 .............................19 10-2K19.1055 .............................19 10-2K19.1056 .............................19 10-2K19.1059 .............................19 61-9740.0 ...................................20 98-968 ........................................20 34 05.2010 Typ-Nr. Page Typ-Nr. Page Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail Phone Fax E-mail EAO reserves the right to alter specifications without further notice E-mail Website EAO AG Tannwaldstrasse 88 4601 Olten, Switzerland info@eao.com www.eao.com Austria +49 201 85 87 0 +49 201 85 87 210 sales.ede@eao.com Belgium +32 3 777 82 36 +32 3 777 84 19 sales.ebl@eao.com China +852 27 86 91 41 +852 27 86 95 61 sales.ehk@eao.com France +33 1 64 43 37 37 +33 1 64 43 37 49 sales.ese@eao.com Germany +49 201 85 87 0 +49 201 85 87 210 sales.ede@eao.com Italy +39 035 481 0189 +39 035 481 3786 sales.eit@eao.com Japan +81 3 5444 5411 +81 3 5444 0345 sales.esj@eao.com Netherlands +31 78 653 17 00 +31 78 653 17 99 sales.enl@eao.com Sweden +46 8 683 86 60 +46 8 724 29 12 sales.esw@eao.com Switzerland +41 62 388 95 00 +41 62 388 95 55 sales.ech@eao.com United Kingdom +44 1444 236 000 +44 1444 236 641 sales.euk@eao.com USA +1 203 877 4577 +1 203 877 3694 sales.eus@eao.com Other Countries +41 62 286 92 10 +41 62 296 21 62 info@eao.com