200D, 202D www.vishay.com Vishay Wet Tantalum Capacitors, Wet Sintered Anode TANTALEX(R) Components TANTAPAK(R) Capacitor Assemblies FEATURES TANTAPAK(R) wet sintered anode capacitor assemblies are widely used in filter, coupling, bypass and time-delay circuits in computers, missiles, airborne equipment, radar and fire control systems. TANTAPAK(R) capacitor assemblies are available in 3 standard case styles and 13 case codes. Type 200D units are constructed with the negative terminal connected to the case; they are available only in the "A" case, in five case codes. Model 202D capacitors are the commercial equivalent of Tansitor style RW, Mallory-NACC style TL and are designed to meet MIL-DTL-3965 and DSCC DWG 04021. PERFORMANCE CHARACTERISTICS Operating Temperature: - 55 C to + 125 C Capacitance Tolerance: At 120 Hz, + 25 C 20 % standard, 10 % available DC Leakage Current (DCL Max.): At + 25 C: Leakage current shall not exceed the values listed in the Standard Ratings tables. Life Test: Capacitors shall withstand 2000 h at a temperature of + 85 C or + 125 C at the rated DC working voltage. Following the life test: 1. DCL shall not exceed the original requirement. 2. ESR shall not be more than 130 % of the initial requirement. 3. Capacitance shall not change more than 25 %. ORDERING INFORMATION 202D 318 X0 006 A1 MODEL CAPACITANCE CAPACITANCE TOLERANCE DC VOLTAGE RATING AT + 85 C CASE CODE 200D = Negative terminal connected to case (Available only in "A" cases) 202D = Both terminals insulated from case This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow. X0 = 20 % X9 = 10 % This is expressed in volts. To complete the three-digit block, zeros precede the voltage rating. See Dimensional Configurations DIMENSIONS in inches [millimeters] Series "A" case 1.305 0.031 [33.15 0.79] Series "B" case 90 1 1.000 0.062 [25.4 1.57] CL 0.720 0.031 [18.29 0.79] CL 0.625 0.015 [15.88 0.38] 90 1 0.625 0.015 [15.88 0.38] 0.266 0.031 [6.76 0.79] 0.062 x 0.125 [1.57 x 3.18] HOLE 0.625 0.015 [15.88 0.38] 0.067 [1.70] DIA. HOLE CL H 0.031 [0.79] 0.750 0.015 [19.05 0.38] 0.062 x 0.125 [1.57 x 3.18] Hole CL 0.203 0.031 [5.16 0.79] 0.281 0.031 [7.14 0.79] H 0.062 [1.57] CL 1.275 0.015 [32.39 0.38] Model 200D Revision: 04-Jan-12 1.593 0.062 [40.46 1.57] Model 202D Document Number: 40027 1 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 200D, 202D www.vishay.com Vishay DIMENSIONS in inches [millimeters] Series "D" case 0.281 0.062 [7.14 1.57] 0.140 0.031 [3.56 0.79] 0.531 0.031 [13.49 0.79] 0.265 0.015 [6.73 0.38] 0.875 0.031 [22.23 0.79] CL 0.138 [3.51] NOM. (6-32 NC 2A THD.) 45 CL 0.140 x 0.125 [1.57 x 3.18] HOLE 0.375 0.062 [9.53 1.57] H 0.031 [0.79] 0.875 0.031 [22.23 0.79] CASE CODE H CASE HEIGHT TYPICAL WEIGHT (g) A1 1.062 [26.97] 45 A2 1.375 [34.93] 60 A3 1.625 [41.28] 80 A4 2.000 [50.80] 100 A5 2.500 [63.50] 125 B1 1.500 [38.10] 170 B2 1.875 [47.63] 210 B3 2.250 [57.15] 250 B4 2.625 [66.68] 290 B5 3.000 [76.20] 335 B6 3.375 [85.73] 380 B7 3.750 [95.25] 420 D3 1.625 [41.28] 120 MAX. IMP. AT - 55 C () MAX. RMS RIPPLE 120 Hz (A) 3.1 2.3 1.7 4.2 3.1 1.3 1.15 2.5 2.1 1.6 1.17 1.45 1.67 1.20 1.52 2.22 2.66 1.83 2.13 2.73 5.0 3.8 3.0 2.5 1.9 1.20 1.52 1.83 2.13 2.75 5.3 4.0 3.2 2.7 2.0 1.10 1.38 1.67 1.98 2.54 5.3 4.2 2.9 5.8 4.4 2.3 2.1 3.5 2.9 2.2 0.87 1.08 1.27 0.99 1.28 1.68 1.93 1.50 1.81 2.25 STANDARD RATINGS TYPE 200D CAPACITANCE (F) CASE CODE 960.0 1200.0 1400.0 1600.0 2100.0 2100.0 2400.0 2700.0 3200.0 4300.0 A1 A2 A3 A1 A2 A4 A5 A3 A4 A5 1300.0 1700.0 2200.0 2700.0 3500.0 A1 A2 A3 A4 A5 1100.0 1400.0 1800.0 2200.0 2900.0 A1 A2 A3 A4 A5 520.0 660.0 820.0 900.0 1200.0 1200.0 1300.0 1500.0 1800.0 2400.0 A1 A2 A3 A1 A2 A4 A5 A3 A4 A5 MAX. ESR AT + 25 C () 15 VDC AT + 85 C; 10 VDC AT + 125 C 200D967X0015A1 0.25 200D128X0015A2 0.21 200D148X0015A3 0.18 200D168X0015A1 0.25 200D218X0015A2 0.19 200D218X0015A4 0.12 200D248X0015A5 0.10 200D278X0015A3 0.15 200D328X0015A4 0.13 200D438X0015A5 0.095 20 VDC AT + 85 C; 13 VDC AT + 125 C 200D138X0020A1 0.25 200D178X0020A2 0.19 200D228X0020A3 0.15 200D278X0020A4 0.13 200D358X0020A5 0.094 25 VDC AT + 85 C; 15 VDC AT + 125 C 200D118X0025A1 0.30 200D148X0025A2 0.23 200D188X0025A3 0.18 200D228X0025A4 0.15 200D298X0025A5 0.11 30 VDC AT + 85 C; 20 VDC AT + 125 C 200D527X0030A1 0.48 200D667X0030A2 0.38 200D827X0030A3 0.31 200D907X0030A1 0.37 200D128X0030A2 0.27 200D128X0030A4 0.21 200D138X0030A5 0.19 200D158X0030A3 0.22 200D188X0030A4 0.18 200D248X0030A5 0.14 PART NUMBER (1) Note The part numbers listed are for 20 % tolerance. To specify 10 % tolerance, change the digit following "X" from "0" to "9". For requirements or ratings other than those listed, please contact a Vishay representative. (1) Revision: 04-Jan-12 Document Number: 40027 2 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 200D, 202D www.vishay.com Vishay STANDARD RATINGS TYPE 200D MAX. ESR AT + 25 C () MAX. IMP. AT - 55 C () MAX. RMS RIPPLE 120 Hz (A) 6.3 0.99 4.7 1.28 0.22 3.8 1.51 200D148X0035A4 0.18 3.2 1.81 200D198X0035A5 0.14 2.4 2.25 CAPACITANCE (F) CASE CODE 720.0 A1 960.0 A2 200D967X0035A2 0.27 1200.0 A3 200D128X0035A3 1400.0 A4 1900.0 A5 PART NUMBER (1) 35 VDC AT + 85 C; 22 VDC AT + 125 C 200D727X0035A1 0.37 40 VDC AT + 85 C; 25 VDC AT + 125 C 600.0 A1 200D607X0040A1 0.33 6.7 1.04 800.0 A2 200D807X0040A2 0.25 5.0 1.33 1000.0 A3 200D108X0040A3 0.20 4.0 1.58 1200.0 A4 200D128X0040A4 0.17 3.3 1.86 1600.0 A5 200D168X0040A5 0.13 2.5 2.34 50 VDC AT + 85 C; 35 VDC AT + 125 C 400.0 A1 200D407X0050A1 0.50 7.2 0.85 430.0 A1 200D437X0050A1 0.58 6.4 0.79 490.0 A1 200D497X0050A1 0.33 7.2 1.04 500.0 A2 200D507X0050A2 0.40 5.6 1.05 600.0 A3 200D607X0050A3 0.33 4.1 1.23 660.0 A2 200D667X0050A2 0.25 5.4 1.33 800.0 A4 200D807X0050A4 0.25 3.1 1.54 820.0 A3 200D827X0050A3 0.20 4.3 1.58 980.0 A4 200D987X0050A4 0.17 3.6 1.86 1000.0 A5 200D108X0050A5 0.25 2.8 2.84 1300.0 A5 200D138X0050A5 0.13 2.7 2.34 60 VDC AT + 85 C; 40 VDC AT + 125 C 410.0 A1 200D417X0060A1 0.33 7.5 1.04 550.0 A2 200D557X0060A2 0.25 5.6 1.33 680.0 A3 200D687X0060A3 0.20 4.5 1.58 820.0 A4 200D827X0060A4 0.17 3.7 1.86 1100.0 A5 200D118X0060A5 0.13 2.8 2.34 75 VDC AT + 85 C; 50 VDC AT + 125 C 270.0 A1 200D277X0075A1 0.56 8.5 0.80 330.0 A2 200D337X0075A2 0.46 7.0 0.98 400.0 A1 200D407X0075A1 0.26 7.5 1.18 400.0 A3 200D407X0075A3 0.38 5.0 1.15 530.0 A2 200D537X0075A2 0.20 5.6 1.48 660.0 A3 200D667X0075A3 0.16 4.5 1.77 600.0 A4 200D607X0075A4 0.25 3.65 1.54 660.0 A5 200D667X0075A5 0.23 3.5 1.76 790.0 A4 200D797X0075A4 0.13 3.7 2.13 110.0 A5 200D118X0075A5 0.096 2.8 2.72 85 VDC AT + 85 C; 60 VDC AT + 125 C 280.0 A1 200D287X0085A1 0.33 9.2 1.04 370.0 A2 200D377X0085A2 0.25 6.9 1.33 470.0 A3 200D477X0085A3 0.20 5.5 1.58 570.0 A4 200D577X0085A4 0.17 4.6 1.86 750.0 A5 200D757X0085A5 0.13 3.4 2.34 Note (1) The part numbers listed are for 20 % tolerance. To specify 10 % tolerance, change the digit following "X" from "0" to "9". For requirements or ratings other than those listed, please contact a Vishay representative. Revision: 04-Jan-12 Document Number: 40027 3 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 200D, 202D www.vishay.com Vishay STANDARD RATINGS TYPE 200D CAPACITANCE (F) CASE CODE 170.0 220.0 260.0 260.0 350.0 350.0 440.0 440.0 530.0 700.0 A1 A2 A1 A3 A2 A4 A3 A5 A4 A5 170.0 220.0 280.0 340.0 A1 A2 A3 A4 70.0 90.0 100.0 140.0 180.0 A1 A2 A3 A4 A5 PART NUMBER (1) MAX. ESR AT + 25 C () 100 VDC AT + 85 C; 70 VDC AT + 125 C 200D177X0100A1 0.94 200D227X0100A2 0.72 200D267X0100A1 0.40 200D267X0100A3 0.61 200D357X0100A2 0.30 200D357X0100A4 0.45 200D447X0100A3 0.24 200D447X0100A5 0.36 200D537X0100A4 0.20 200D707X0100A5 0.15 125 VDC AT + 85 C; 80 VDC AT + 125 C 200D177X0125A1 0.40 200D227X0125A2 0.30 200D287X0125A3 0.24 200D347X0125A4 0.20 150 VDC AT + 85 C; 100 VDC AT + 125 C 200D706X0150A1 2.27 200D906X0150A2 1.77 200D107X0150A3 1.59 200D147X0150A4 1.14 200D187X0150A5 0.88 MAX. IMP. AT - 55 C () MAX. RMS RIPPLE 120 Hz (A) 15.0 11.6 8.3 8.0 6.2 6.5 5.0 5.8 4.2 3.1 0.62 0.78 0.95 0.91 1.21 1.15 1.44 1.40 1.72 2.18 15.0 12.0 9.0 7.5 0.95 1.21 1.44 1.72 28.8 22.4 16.4 12.4 11.2 0.40 0.50 0.56 0.72 0.90 Note (1) The part numbers listed are for 20 % tolerance. To specify 10 % tolerance, change the digit following "X" from "0" to "9". For requirements or ratings other than those listed, please contact a Vishay representative. STANDARD RATINGS TYPE 202D MAX. IMP. AT - 55 C () MAX. RMS RIPPLE 120 Hz (A) 0.25 3.1 1.17 0.21 2.3 1.45 0.18 1.7 1.67 202D168X0015A1 0.25 4.2 1.20 A2 202D218X0015A2 0.19 3.1 1.52 2100.0 A4 202D218X0015A4 0.12 1.3 2.22 2200.0 D3 202D228X0015D3 0.30 5.8 1.14 2400.0 A5 202D248X0015A5 0.10 1.15 2.66 2700.0 A3 202D278X0015A3 0.15 2.5 1.83 3200.0 A4 202D328X0015A4 0.13 2.1 2.13 3300.0 B1 202D338X0015B1 0.14 3.2 2.17 4300.0 A5 202D438X0015A5 0.095 1.6 2.73 4500.0 B2 202D458X0015B2 0.11 2.4 2.65 5600.0 B3 202D568X0015B3 0.085 1.9 3.24 6700.0 B4 202D678X0015B4 0.070 1.6 3.80 7800.0 B5 202D788X0015B5 0.061 1.4 4.28 9000.0 B6 202D908X0015B6 0.053 1.2 4.84 10 000.0 B7 202D109X0015B7 0.047 1.1 5.38 CAPACITANCE (F) CASE CODE 960.0 A1 202D967X0015A1 1200.0 A2 202D128X0015A2 1400.0 A3 202D148X0015A3 1600.0 A1 2100.0 PART NUMBER (1) MAX. ESR AT + 25 C () 15 VDC AT + 85 C; 10 VDC AT + 125 C Note The part numbers listed are for 20 % tolerance. To specify 10 % tolerance, change the digit following "X" from "0" to "9". For requirements or ratings other than those listed, please contact a Vishay representative. (1) Revision: 04-Jan-12 Document Number: 40027 4 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 200D, 202D www.vishay.com Vishay STANDARD RATINGS TYPE 202D CAPACITANCE (F) CASE CODE PART NUMBER (1) MAX. ESR AT + 25 C () MAX. IMP. AT - 55 C () MAX. RMS RIPPLE 120 Hz (A) 5.0 3.8 5.0 3.0 2.5 3.3 1.9 2.5 2.0 1.7 1.4 1.3 1.1 1.20 1.52 1.36 1.83 2.13 2.17 2.75 2.65 3.24 3.77 4.28 4.84 5.38 5.3 4.0 5.3 3.2 2.7 3.5 2.0 2.6 2.1 1.8 1.5 1.3 1.2 1.10 1.38 1.36 1.67 1.98 2.17 2.54 2.65 3.24 3.77 4.28 4.84 5.38 5.3 4.2 2.9 5.8 4.4 2.3 2.1 5.5 3.5 2.9 1.7 2.2 2.8 2.2 1.8 1.6 1.4 1.2 0.87 1.08 1.27 0.99 1.28 1.68 1.93 1.22 1.50 1.81 1.97 2.25 2.43 2.98 3.45 3.92 4.40 4.88 20 VDC AT + 85 C; 13 VDC AT + 125 C 1300.0 1700.0 1900.0 2200.0 2700.0 2800.0 3500.0 3800.0 4700.0 5600.0 6600.0 7500.0 8500.0 A1 A2 D3 A3 A4 B1 A5 B2 B3 B4 B5 B6 B7 1100.0 1400.0 1600.0 1800.0 2200.0 2300.0 2900.0 3100.0 3900.0 4700.0 5500.0 6200.0 7000.0 A1 A2 D3 A3 A4 B1 A5 B2 B3 B4 B5 B6 B7 520.0 660.0 820.0 900.0 1200.0 1200.0 1300.0 1300.0 1500.0 1800.0 2000.0 2400.0 2600.0 3300.0 4000.0 4600.0 5300.0 6000.0 A1 A2 A3 A1 A2 A4 A5 D3 A3 A4 B1 A5 B2 B3 B4 B5 B6 B7 202D138X0020A1 202D178X0020A2 202D198X0020D3 202D228X0020A3 202D278X0020A4 202D288X0020B1 202D358X0020A5 202D388X0020B2 202D478X0020B3 202D568X0020B4 202D668X0020B5 202D758X0020B6 202D858X0020B7 0.25 0.19 0.21 0.15 0.13 0.14 0.094 0.11 0.085 0.071 0.061 0.053 0.047 25 VDC AT + 85 C; 15 VDC AT + 125 C 202D118X0025A1 202D148X0025A2 202D168X0025D3 202D188X0025A3 202D228X0025A4 202D238X0025B1 202D298X0025A5 202D318X0025B2 202D398X0025B3 202D478X0025B4 202D558X0025B5 202D628X0025B6 202D708X0025B7 0.30 0.23 0.21 0.18 0.15 0.14 0.11 0.11 0.085 0.071 0.061 0.053 0.047 30 VDC AT + 85 C; 20 VDC AT + 125 C 202D527X0030A1 202D667X0030A2 202D827X0030A3 202D907X0030A1 202D128X0030A2 202D128X0030A4 202D138X0030A5 202D138X0030D3 202D158X0030A3 202D188X0030A4 202D208X0030B1 202D248X0030A5 202D268X0030B2 202D338X0030B3 202D408X0030B4 202D468X0030B5 202D538X0030B6 202D608X0030B7 0.48 0.38 0.31 0.37 0.27 0.21 0.19 0.26 0.22 0.18 0.17 0.14 0.13 0.10 0.085 0.073 0.064 0.057 Note (1) The part numbers listed are for 20 % tolerance. To specify 10 % tolerance, change the digit following "X" from "0" to "9". For requirements or ratings other than those listed, please contact a Vishay representative. Revision: 04-Jan-12 Document Number: 40027 5 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 200D, 202D www.vishay.com Vishay STANDARD RATINGS TYPE 202D CAPACITANCE (F) CASE CODE 720.0 960.0 1100.0 1200.0 1400.0 1600.0 1900.0 2200.0 2700.0 3200.0 3800.0 4300.0 4900.0 A1 A2 D3 A3 A4 B1 A5 B2 B3 B4 B5 B6 B7 600.0 800.0 880.0 1000.0 1200.0 1300.0 1600.0 1800.0 2200.0 2600.0 3100.0 3500.0 4000.0 A1 A2 D3 A3 A4 B1 A5 B2 B3 B4 B5 B6 B7 400.0 430.0 490.0 500.0 600.0 660.0 720.0 800.0 820.0 980.0 1000.0 1100.0 1300.0 1400.0 1800.0 2200.0 2500.0 2900.0 3200.0 A1 A1 A1 A2 A3 A2 D3 A4 A3 A4 A5 B1 A5 B2 B3 B4 B5 B6 B7 PART NUMBER (1) MAX. ESR AT + 25 C () 35 VDC AT + 85 C; 22 VDC AT + 125 C 202D727X0035A1 0.37 202D967X0035A2 0.27 202D118X0035D3 0.30 202D128X0035A3 0.22 202D148X0035A4 0.18 202D168X0035B1 0.20 202D198X0035A5 0.14 202D228X0035B2 0.15 202D278X0035B3 0.12 202D328X0035B4 0.10 202D388X0035B5 0.085 202D438X0035B6 0.075 202D498X0035B7 0.067 40 VDC AT + 85 C; 25 VDC AT + 125 C 202D607X0040A1 0.33 202D807X0040A2 0.25 202D887X0040D3 0.30 202D108X0040A3 0.20 202D128X0040A4 0.17 202D138X0040B1 0.20 202D168X0040A5 0.13 202D188X0040B2 0.15 202D228X0040B3 0.12 202D268X0040B4 0.10 202D318X0040B5 0.086 202D358X0040B6 0.075 202D408X0040B7 0.057 50 VDC AT + 85 C; 35 VDC AT + 125 C 202D407X0050A1 0.50 202D437X0050A1 0.58 202D497X0050A1 0.33 202D507X0050A2 0.40 202D607X0050A3 0.33 202D667X0050A2 0.25 202D727X0050D3 0.30 202D807X0050A4 0.25 202D827X0050A3 0.20 202D987X0050A4 0.17 202D108X0050A5 0.25 202D118X0050B1 0.20 202D138X0050A5 0.13 202D148X0050B2 0.15 202D188X0050B3 0.12 202D228X0050B4 0.10 202D258X0050B5 0.086 202D298X0050B6 0.075 202D328X0050B7 0.067 MAX. IMP. AT - 55 C () MAX. RMS RIPPLE 120 Hz (A) 6.3 4.7 5.7 3.8 3.2 3.8 2.4 2.9 2.3 1.9 1.6 1.4 1.3 0.99 1.28 1.14 1.51 1.81 1.82 2.25 2.27 2.72 3.18 3.63 4.07 4.51 6.7 5.0 6.0 4.0 3.3 4.0 2.5 3.0 2.4 2.0 1.7 1.5 1.3 1.04 1.33 1.14 1.58 1.86 1.82 2.34 2.27 2.72 3.18 3.61 4.07 4.51 7.2 6.4 7.2 5.6 4.1 5.4 6.2 3.1 4.3 3.6 2.8 4.2 2.7 3.1 2.5 2.0 1.8 1.6 1.4 0.85 0.79 1.04 1.05 1.23 1.33 1.14 1.54 1.58 1.86 2.84 1.82 2.34 2.27 2.72 3.18 3.61 4.07 4.51 Note (1) The part numbers listed are for 20 % tolerance. To specify 10 % tolerance, change the digit following "X" from "0" to "9". For requirements or ratings other than those listed, please contact a Vishay representative. Revision: 04-Jan-12 Document Number: 40027 6 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 200D, 202D www.vishay.com Vishay STANDARD RATINGS TYPE 202D MAX. ESR AT + 25 C () MAX. IMP. AT - 55 C () MAX. RMS RIPPLE 120 Hz (A) 0.33 7.5 1.04 0.25 5.6 1.33 CAPACITANCE (F) CASE CODE 410.0 A1 202D417X0060A1 550.0 A2 202D557X0060A2 600.0 D3 202D607X0060A2 0.33 6.5 1.09 680.0 A3 202D687X0060A3 0.20 4.5 1.58 PART NUMBER (1) 60 VDC AT + 85 C; 40 VDC AT + 125 C 820.0 A4 202D827X0060A4 0.17 3.7 1.86 900.0 B1 202D907X0060A2 0.22 4.3 1.73 1100.0 A5 202D118X0060A5 0.13 2.8 2.34 1200.0 B2 202D128X0060B2 0.16 3.3 2.19 1500.0 B3 202D158X0060B3 0.13 2.6 2.62 1800.0 B4 202D188X0060B4 0.11 2.2 3.03 2100.0 B5 202D218X0060B4 0.093 1.9 3.47 2400.0 B6 202D248X0060B6 0.081 1.6 3.9 2700.0 B7 202D278X0060B7 0.072 1.4 4.35 270.0 A1 202D277X0075A1 0.56 8.5 0.80 330.0 A2 202D337X0075A2 0.46 7.0 0.98 400.0 A1 202D407X0075A1 0.26 7.5 1.18 400.0 A3 202D407X0075A3 0.38 5.0 1.15 530.0 A2 202D537X0075A2 0.20 5.6 1.48 480.0 D3 202D487X0075D3 0.42 6.8 0.96 660.0 A3 202D667X0075A3 0.16 4.5 1.77 600.0 A4 202D607X0075A4 0.25 3.65 1.54 660.0 A5 202D667X0075A5 0.23 3.5 1.76 790.0 A4 202D797X0075A4 0.13 3.7 2.13 720.0 B1 202D727X0075B1 0.28 4.5 1.54 110.0 A5 202D118X0075A5 0.096 2.8 2.72 75 VDC AT + 85 C; 50 VDC AT + 125 C 960.0 B2 202D967X0075B2 0.21 3.4 1.91 1200.0 B3 202D128X0075B3 0.17 2.7 2.29 1400.0 B4 202D148X0075B4 0.14 2.1 2.69 1700.0 B5 202D178X0075B5 0.12 1.9 3.06 1900.0 B6 202D198X0075B6 0.11 1.7 3.36 2200.0 B7 202D228X0075B7 0.095 1.5 3.78 280.0 A1 202D287X0085A1 0.33 9.2 1.04 370.0 A2 202D377X0085A2 0.25 6.9 1.33 400.0 D3 202D407X0085D3 0.42 7.0 0.96 470.0 A3 202D477X0085A3 0.20 5.5 1.58 570.0 A4 202D577X0085A4 0.17 4.6 1.86 600.0 B1 202D607X0085B1 0.28 4.7 1.54 750.0 A5 202D757X0085A5 0.13 3.4 2.34 800.0 B2 202D807X0085B2 0.21 3.5 1.91 1000.0 B3 202D108X0085B3 0.17 2.8 2.29 1200.0 B4 202D128X0085B4 0.14 2.4 2.69 1400.0 B5 202D148X0085B5 0.12 2.0 3.06 1600.0 B6 202D168X0085B6 0.11 1.8 3.36 1800.0 B7 202D188X0085B7 0.095 1.6 3.78 85 VDC AT + 85 C; 60 VDC AT + 125 C Note (1) The part numbers listed are for 20 % tolerance. To specify 10 % tolerance, change the digit following "X" from "0" to "9". For requirements or ratings other than those listed, please contact a Vishay representative. Revision: 04-Jan-12 Document Number: 40027 7 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 200D, 202D www.vishay.com Vishay STANDARD RATINGS TYPE 202D CAPACITANCE (F) CASE CODE 170.0 220.0 260.0 260.0 340.0 350.0 350.0 440.0 440.0 510.0 530.0 680.0 700.0 850.0 1000.0 1200.0 1400.0 1500.0 A1 A2 A1 A3 D3 A2 A4 A3 A5 B1 A4 B2 A5 B3 B4 B5 B6 B7 170.0 220.0 220.0 280.0 340.0 340.0 560.0 670.0 790.0 900.0 1000.0 A1 A2 D3 A3 A4 B1 B3 B4 B5 B6 B7 70.0 90.0 100.0 140.0 180.0 A1 A2 A3 A4 A5 PART NUMBER (1) MAX. ESR AT + 25 C () 100 VDC AT + 85 C; 70 VDC AT + 125 C 202D177X0100A1 0.94 202D227X0100A2 0.72 202D267X0100A1 0.40 202D267X0100A3 0.61 202D347X0100D3 0.75 202D357X0100A2 0.30 202D357X0100A4 0.45 202D447X0100A3 0.24 202D447X0100A5 0.36 202D517X0100B1 0.28 202D537X0100A4 0.20 202D687X0100B2 0.21 202D707X0100A5 0.15 202D857X0100B3 0.17 202D108X0100B4 0.14 202D128X0100B5 0.12 202D148X0100B6 0.11 202D158X0100B7 0.095 125 VDC AT + 85 C; 80 VDC AT + 125 C 202D177X0125A1 0.40 202D227X0125A2 0.30 202D227X0125D3 0.42 202D287X0125A3 0.24 202D347X0125A4 0.20 202D347X0125B1 0.28 202D567X0125B3 0.17 202D677X0125B4 0.14 202D797X0125B5 0.12 202D907X0125B6 0.11 202D108X0125B7 0.095 150 VDC AT + 85 C; 100 VDC AT + 125 C 202D706X0150A1 2.27 202D906X0150A2 1.77 202D107X0150A3 1.59 202D147X0150A4 1.14 202D187X0150A5 0.88 MAX. IMP. AT - 55 C () MAX. RMS RIPPLE 120 Hz (A) 15.0 11.6 8.3 8.0 7.5 6.2 6.5 5.0 5.8 4.8 4.2 3.6 3.1 2.9 2.4 2.1 1.8 1.6 0.62 0.78 0.95 0.91 0.72 1.21 1.15 1.44 1.40 1.54 1.72 1.91 2.18 2.29 2.69 3.06 3.36 3.78 15.0 12.0 8.0 9.0 7.5 5.4 3.2 2.7 2.4 2.0 1.8 0.95 1.21 0.96 1.44 1.72 1.54 2.29 2.69 3.06 3.38 3.78 28.8 22.4 16.4 12.4 11.2 0.40 0.50 0.56 0.72 0.90 Note (1) The part numbers listed are for 20 % tolerance. To specify 10 % tolerance, change the digit following "X" from "0" to "9". For requirements or ratings other than those listed, please contact a Vishay representative. Revision: 04-Jan-12 Document Number: 40027 8 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 200D, 202D www.vishay.com Vishay EXTENDED RATINGS TYPE 200D MAX. IMP. AT - 55 C () MAX. RMS RIPPLE 120 Hz (A) 0.28 2.3 1.13 200D828X0006A2 0.22 1.8 1.41 200D998X0006A3 0.18 1.5 1.67 200D139X0006A4 0.14 1.1 2.05 CAPACITANCE (F) CASE CODE 6600.0 A1 200D668X0006A1 8200.0 A2 9900.0 A3 13 000.0 A4 PART NUMBER MAX. ESR AT + 25 C () 6 VDC AT + 85 C; 4 VDC AT + 125 C 8 VDC AT + 85 C; 5 VDC AT + 125 C 5400.0 A1 200D548X0008A1 0.28 2.8 1.13 6800.0 A2 200D688X0008A2 0.22 2.2 1.41 8200.0 A3 200D828X0008A3 0.18 1.8 1.67 11000.0 A4 200D119X0008A4 0.14 1.4 2.05 14 000.0 A5 200D149X0008A5 0.11 1.1 2.35 4500.0 A1 200D458X0010A1 0.28 3.4 1.13 5600.0 A2 200D568X0010A2 0.22 2.7 1.41 6800.0 A3 200D688X0010A3 0.18 2.2 1.67 9000.0 A4 200D908X0010A4 0.14 1.7 2.05 11 000.0 A5 200D119X0010A5 0.11 1.4 2.35 10 VDC AT + 85 C; 7 VDC AT + 125 C 15 VDC AT + 85 C; 10 VDC AT + 125 C 3100.0 A1 200D318X0015A1 0.28 3.9 1.13 3900.0 A2 200D398X0015A2 0.22 3.1 1.41 4700.0 A3 200D478X0015A3 0.18 2.6 1.67 6200.0 A4 200D628X0015A4 0.14 1.9 2.05 7800.0 A5 200D788X0015A5 0.11 1.6 2.54 2600.0 A1 200D268X0020A1 0.28 3.9 1.13 3300.0 A2 200D338X0020A2 0.22 3.1 1.41 4000.0 A3 200D408X0020A3 0.18 2.6 1.67 5300.0 A4 200D538X0020A4 0.14 1.9 2.05 6600.0 A5 200D668X0020A5 0.11 1.6 2.54 20 VDC AT + 85 C; 13 VDC AT + 125 C 25 VDC AT + 85 C; 15 VDC AT + 125 C 2200.0 A1 200D228X0025A1 0.28 4.1 1.13 2700.0 A2 200D278X0025A2 0.22 3.3 1.41 3200.0 A3 200D328X0025A3 0.18 2.8 1.67 4300.0 A4 200D438X0025A4 0.14 2.1 2.05 5400.0 A5 200D548X0025A5 0.11 1.7 2.54 1800.0 A1 200D188X0030A1 0.28 4.5 1.13 2200.0 A2 200D228X0030A2 0.22 3.6 1.41 2600.0 A3 200D268X0030A3 0.18 3.0 1.67 3500.0 A4 200D358X0030A4 0.14 2.3 2.05 4400.0 A5 200D448X0030A5 0.11 1.8 2.54 30 VDC AT + 85 C; 20 VDC AT + 125 C Note (1) The part numbers listed are for 20 % tolerance. To specify 10 % tolerance, change the digit following "X" from "0" to "9". For requirements or ratings other than those listed, please contact a Vishay representative. Revision: 04-Jan-12 Document Number: 40027 9 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 200D, 202D www.vishay.com Vishay EXTENDED RATINGS TYPE 200D CAPACITANCE (F) CASE CODE PART NUMBER MAX. ESR AT + 25 C () MAX. IMP. AT - 55 C () MAX. RMS RIPPLE 120 Hz (A) 35 VDC AT + 85 C; 22 VDC AT + 125 C 1400.0 A1 200D148X0035A1 0.28 5.1 1.13 1800.0 A2 200D188X0035A2 0.22 4.1 1.41 2200.0 A3 200D228X0035A3 0.18 3.4 1.67 2900.0 A4 200D298X0035A4 0.14 2.6 2.05 3600.0 A5 200D368X0035A5 0.11 2.1 2.54 1200.0 A1 200D128X0040A1 0.28 5.5 1.13 1500.0 A2 200D158X0040A2 0.22 4.4 1.41 1800.0 A3 200D188X0040A3 0.18 3.7 1.67 2400.0 A4 200D248X0040A4 0.14 2.8 2.05 3000.0 A5 200D308X0040A5 0.11 2.3 2.54 40 VDC AT + 85 C; 25 VDC AT + 125 C 50 VDC AT + 85 C; 35 VDC AT + 125 C 960.0 A1 200D967X0050A1 0.28 6.1 1.13 1200.0 A2 200D128X0050A2 0.22 4.9 1.14 1400.0 A3 200D148X0050A3 0.18 4.1 1.67 1900.0 A4 200D198X0050A4 0.14 3.1 2.05 2400.0 A5 200D248X0050A5 0.11 2.5 2.54 60 VDC AT + 85 C; 40 VDC AT + 125 C 800.0 A1 200D807X0060A1 0.28 6.8 1.13 1000.0 A2 200D108X0060A2 0.22 5.4 1.41 1200.0 A3 200D128X0060A3 0.18 4.5 1.67 1600.0 A4 200D168X0060A4 0.14 3.4 2.05 2000.0 A5 200D208X0060A5 0.11 2.7 2.54 75 VDC AT + 85 C; 50 VDC AT + 125 C 650.0 A1 200D657X0075A1 0.28 7.9 1.13 820.0 A2 200D827X0075A2 0.22 6.3 1.41 980.0 A3 200D987X0075A3 0.18 5.2 1.64 1300.0 A4 200D138X0075A4 0.14 3.9 2.05 1600.0 A5 200D168X0075A5 0.11 3.2 2.54 Note (1) The part numbers listed are for 20 % tolerance. To specify 10 % tolerance, change the digit following "X" from "0" to "9". For requirements or ratings other than those listed, please contact a Vishay representative. Revision: 04-Jan-12 Document Number: 40027 10 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 200D, 202D www.vishay.com Vishay EXTENDED RATINGS TYPE 202D CAPACITANCE (F) CASE CODE 6600.0 8200.0 9900.0 12 000.0 13 000.0 15 000.0 A1 A2 A3 B1 A4 A5 5400.0 6800.0 8200.0 9600.0 11000.0 12 000.0 14 000.0 A1 A2 A3 B1 A4 B2 A5 4500.0 5600.0 6800.0 9000.0 9600.0 11 000.0 A1 A2 A3 A4 B1 A5 3100.0 3900.0 4700.0 6200.0 6560.0 7800.0 A1 A2 A3 A4 B1 A5 2600.0 3300.0 4000.0 5300.0 6600.0 A1 A2 A3 A4 A5 2200.0 2700.0 3200.0 4300.0 5400.0 A1 A2 A3 A4 A5 1800.0 2200.0 2600.0 3500.0 4400.0 A1 A2 A3 A4 A5 PART NUMBER MAX. ESR AT + 25 C () MAX. IMP. AT - 55 C () MAX. RMS RIPPLE 120 Hz (A) 2.3 1.8 1.5 0.90 1.1 1.8 1.13 1.41 1.67 2.54 2.05 2.35 2.8 2.2 1.8 1.8 1.4 1.3 1.1 1.13 1.41 1.67 2.54 2.05 2.99 2.35 3.4 2.7 2.2 1.7 1.8 1.4 1.13 1.41 1.67 2.05 2.54 2.35 3.9 3.1 2.6 1.9 2.2 1.6 1.13 1.41 1.67 2.05 2.03 2.54 3.9 3.1 2.6 1.9 1.6 1.13 1.41 1.67 2.05 2.54 4.1 3.3 2.8 2.1 1.7 1.13 1.41 1.67 2.05 2.54 4.5 3.6 3.0 2.3 1.8 1.13 1.41 1.67 2.05 2.54 6 VDC AT + 85 C; 4 VDC AT + 125 C 202D668X0006A1 202D828X0006A2 202D998X0006A3 202D129X0006B1 202D139X0006A4 202D159X0006A5 0.28 0.22 0.18 0.11 0.14 0.12 8 VDC AT + 85 C; 5 VDC AT + 125 C 202D548X0008A1 202D688X0008A2 202D828X0008A3 202D968X0008B1 202D119X0008A4 202D129X0008B2 202D149X0008A5 0.28 0.22 0.18 0.12 0.14 0.086 0.11 10 VDC AT + 85 C; 7 VDC AT + 125 C 202D458X0010A1 202D568X0010A2 202D688X0010A3 202D908X0010A4 202D968X0010B1 202D119X0010A5 0.28 0.22 0.18 0.14 0.12 0.11 15 VDC AT + 85 C; 10 VDC AT + 125 C 202D318X0015A1 202D398X0015A2 202D478X0015A3 202D628X0015A4 202D668X0015B1 202D788X0015A5 0.28 0.22 0.18 0.14 0.16 0.11 20 VDC AT + 85 C; 13 VDC AT + 125 C 202D268X0020A1 202D338X0020A2 202D408X0020A3 202D538X0020A4 202D668X0020A5 0.28 0.22 0.18 0.14 0.11 25 VDC AT + 85 C; 15 VDC AT + 125 C 202D228X0025A1 202D278X0025A2 202D328X0025A3 202D438X0025A4 202D548X0025A5 0.28 0.22 0.18 0.14 0.11 30 VDC AT + 85 C; 20 VDC AT + 125 C 202D188X0030A1 202D228X0030A2 202D268X0030A3 202D358X0030A4 202D448X0030A5 0.28 0.22 0.18 0.14 0.11 Note The part numbers listed are for 20 % tolerance. To specify 10 % tolerance, change the digit following "X" from "0" to "9". For requirements or ratings other than those listed, please contact a Vishay representative. (1) Revision: 04-Jan-12 Document Number: 40027 11 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 200D, 202D www.vishay.com Vishay EXTENDED RATINGS TYPE 202D CAPACITANCE (F) CASE CODE PART NUMBER MAX. ESR AT + 25 C () MAX. IMP. AT - 55 C () MAX. RMS RIPPLE 120 Hz (A) 35 VDC AT + 85 C; 22 VDC AT + 125 C 1400.0 A1 202D148X0035A1 0.28 5.1 1.13 1800.0 A2 202D188X0035A2 0.22 4.1 1.41 2200.0 A3 202D228X0035A3 0.18 3.4 1.67 2900.0 A4 202D298X0035A4 0.14 2.6 2.05 3600.0 A5 202D368X0035A5 0.11 2.1 2.54 3900.0 B1 202D398X0035B1 0.16 2.7 2.03 5500.0 B2 202D558X0035B2 0.11 1.9 2.64 7000.0 B3 202D708X0035B3 0.089 1.5 3.16 8600.0 B4 202D868X0035B4 0.073 1.2 3.72 10 000.0 B5 202D109X0035B5 0.062 1.0 4.25 12 000.0 B6 202D129X0035B6 0.053 0.90 4.84 13 000.0 B7 202D139X0035B7 0.047 0.79 5.38 40 VDC AT + 85 C; 25 VDC AT + 125 C 1200.0 A1 202D128X0040A1 0.28 5.5 1.13 1500.0 A2 202D158X0040A2 0.22 4.4 1.41 1800.0 A3 202D188X0040A3 0.18 3.7 1.67 2400.0 A4 202D248X0040A4 0.14 2.8 2.05 3000.0 A5 202D308X0040A5 0.11 2.3 2.54 1.13 50 VDC AT + 85 C; 35 VDC AT + 125 C 960.0 A1 202D967X0050A1 0.28 6.1 1200.0 A2 202D128X0050A2 0.22 4.9 1.14 1300.0 D3 202D138X0050D3 0.38 5.5 1.01 1400.0 A3 202D148X0050A3 0.18 4.1 1.67 1900.0 A4 202D198X0050A4 0.14 3.1 2.05 2400.0 A5 202D248X0050A5 0.11 2.5 2.54 1.13 60 VDC AT + 85 C; 40 VDC AT + 125 C 800.0 A1 202D807X0060A1 0.28 6.8 1000.0 A2 202D108X0060A2 0.22 5.4 1.41 1100.0 D3 202D118X0060D3 0.38 5.8 1.01 1200.0 A3 202D128X0060A3 0.18 4.5 1.67 1600.0 A4 202D168X0060A4 0.14 3.4 2.05 2000.0 A5 202D208X0060A5 0.11 2.7 2.54 650.0 A1 202D657X0075A1 0.28 7.9 1.13 820.0 A2 202D827X0075A2 0.22 6.3 1.41 880.0 D3 202D887X0075D3 0.55 6.0 0.84 75 VDC AT + 85 C; 50 VDC AT + 125 C 980.0 A3 202D987X0075A3 0.18 5.2 1.64 1300.0 A4 202D138X0075A4 0.14 3.9 2.05 1600.0 A5 202D168X0075A5 0.11 3.2 2.54 Note (1) The part numbers listed are for 20 % tolerance. To specify 10 % tolerance, change the digit following "X" from "0" to "9". For requirements or ratings other than those listed, please contact a Vishay representative. Revision: 04-Jan-12 Document Number: 40027 12 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 200D, 202D www.vishay.com Vishay 04021 RATINGS AND CASE CODES DSCC DRAWING 04021 CAPACITANCE (F) 15 VDC AT 85 C RATED MAX. DCL (A) CASE CODE 25 C 17.2 VDC AT 85 C SURGE 04021-01 960 A1 04021-02 1200 04021-03 1400 04021-04 04021-05 85 C AND 125 C MAX. IMPEDANCE () 10 VDC AT 125 C DERATED 7 58 3.10 A2 9 72 2.30 A3 11 84 1.70 2100 A4 16 126 1.30 2400 A5 18 144 1.15 30 VDC AT 85 C RATED 34.5 VDC AT 85 C SURGE 20 VDC AT 125 C DERATED 04021-06 520 A1 8 63 5.30 04021-07 660 A2 10 80 4.20 04021-08 820 A3 13 99 2.90 04021-09 1200 A4 18 144 2.30 04021-10 1300 A5 20 156 2.10 50 VDC AT 85 C RATED 57.5 VDC AT 85 C SURGE 30 VDC AT 125 C DERATED 04021-11 400 A1 10 80 7.20 04021-12 430 A1 10 78 6.40 04021-13 500 A2 13 100 5.60 04021-14 600 A3 15 120 4.10 04021-15 800 A4 20 160 3.10 04021-16 1000 A5 23 180 2.80 75 VDC AT 85 C RATED 86.2 VDC AT 85 C SURGE 50 VDC AT 125 C DERATED 04021-17 270 A1 9 81 8.50 04021-18 330 A2 12 99 7.00 04021-19 400 A3 15 119 5.00 04021-20 600 A4 20 180 3.65 04021-21 660 A5 23 198 3.50 100 VDC AT 85 C RATED 115.0 VDC AT 85 C SURGE 65 VDC AT 125 C DERATED 04021-22 170 A1 9 68 15.00 04021-23 220 A2 11 88 11.60 04021-24 260 A3 13 104 8.00 04021-25 350 A4 18 140 6.50 04021-26 440 A5 22 176 5.80 150 VDC AT 85 C RATED 172.0 VDC AT 85 C SURGE 100 VDC AT 125 C DERATED 04021-27 70 A1 6 42 28.80 04021-28 90 A2 7 54 22.40 04021-29 100 A3 9 60 16.40 04021-30 140 A4 11 84 12.40 04021-31 180 A5 14 104 11.20 ORDERING INFORMATION - DSCC PART NUMBER 04021 -29 DSCC DRAWING NUMBER DASH NUMBER DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OHIO DRAWING NO. 04021 Revision: 04-Jan-12 Document Number: 40027 13 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 200D, 202D www.vishay.com Vishay MILITARY SPECIFICATION TANTAPAK(R) CAPACITOR ASSEMBLIES - CROSS REFERENCE CAPACITANCE (F) RATED VOLTAGE AT + 85 C CASE CODE VISHAY PART NUMBER (DISCONTINUED) CL55 TYPE (1) DESIGNATION (NEW) DSCC DRAWING (1) 04021 960.0 15 A1 202D967X0015A1 CL55BE961MPG 04021-01 1200.0 15 A2 202D128X0015A2 CL55BE122MPG 04021-02 1400.0 15 A3 202D148X0015A3 CL55BE142MPG 04021-03 2100.0 15 A4 202D218X0015A4 CL55BE212MPG 04021-04 2400.0 15 A5 202D248X0015A5 CL55BE242MPG 04021-05 520.0 30 A1 202D527X0030A1 CL55BH521MPG 04021-06 660.0 30 A2 202D667X0030A2 CL55BH661MPG 04021-07 820.0 30 A3 202D827X0030A3 CL55BH821MPG 04021-08 1200.0 30 A4 202D128X0030A4 CL55BH122MPG 04021-09 1300.0 30 A5 202D138X0030A5 CL55BH132MPG 04021-10 400.0 50 A1 202D407X0050A1 CL55BJ401MPG 04021-11 430.0 50 A1 202D437X0050A1 CL55BJ431MPG 04021-12 500.0 50 A2 202D507X0050A2 CL55BJ501MPG 04021-13 600.0 50 A3 202D607X0050A3 CL55BJ601MPG 04021-14 800.0 50 A4 202D807X0050A4 CL55BJ801MPG 04021-15 1000.0 50 A5 202D108X0050A5 CL55BJ102MPG 04021-16 270.0 75 A1 202D277X0075A1 CL55BL271MPG 04021-17 330.0 75 A2 202D337X0075A2 CL55BL331MPG 04021-18 400.0 75 A3 202D407X0075A3 CL55BL401MPG 04021-19 600.0 75 A4 202D607X0075A4 CL55BL601MPG 04021-20 660.0 75 A5 202D667X0075A5 CL55BL661MPG 04021-21 170.0 100 A1 202D177X0100A1 CL55BN171MPG 04021-22 220.0 100 A2 202D227X0100A2 CL55BN221MPG 04021-23 260.0 100 A3 202D267X0100A3 CL55BN261MPG 04021-24 350.0 100 A4 202D357X0100A4 CL55BN351MPG 04021-25 440.0 100 A5 202D447X0100A5 CL55BN441MPG 04021-26 70.0 150 A1 202D706X0150A1 CL55BQ700MPG 04021-27 90.0 150 A2 202D906X0150A2 CL55BQ900MPG 04021-28 100.0 150 A3 202D107X0150A3 CL55BQ101MPG 04021-29 140.0 150 A4 202D147X0150A4 CL55BQ141MPG 04021-30 180.0 150 A5 202D187X0150A5 CL55BQ181MPG 04021-31 Note (1) Vishay is no longer qualified to provide military CL55 type which has been discontinued. It has been replaced by an equivalent product built to DSCC drawing 04021 Revision: 04-Jan-12 Document Number: 40027 14 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000