200D, 202D
www.vishay.com Vishay
Revision: 04-Jan-12 1Document Number: 40027
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Wet Tantalum Capacitors, Wet Sintered Anode TANTALEX®
Components TANTAPAK® Capacitor Assemblies
FEATURES
TANTAPAK® wet sintered anode capacitor assemblies are
widely used in filter, coupling, bypass and time-delay
circuits in computers, missiles, airborne equipment, radar
and fire control systems.
TANTAPAK® capacitor assemblies are available in 3 standard
case styles and 13 case codes. Type 200D units are
constructed with the negative terminal connected to the
case; they are available only in the “A” case, in five case
codes. Model 202D capacitors are the commercial
equivalent of Tansitor style RW, Mallory-NACC style TL and
are designed to meet MIL-DTL-3965 and DSCC DWG
04021.
PERFORMANCE CHARACTERISTICS
Operating Temperature: - 55 °C to + 125 °C
Capacitance Tolerance: At 120 Hz, + 25 °C
± 20 % standard, ± 10 % available
DC Leakage Current (DCL Max.):
At + 25 °C: Leakage current shall not exceed the values
listed in the Standard Ratings tables.
Life Test: Capacitors shall withstand 2000 h at a
temperature of + 85 °C or + 125 °C at the rated DC working
voltage.
Following the life test:
1. DCL shall not exceed the original requirement.
2. ESR shall not be more than 130 % of the initial
requirement.
3. Capacitance shall not change more than ± 25 %.
ORDERING INFORMATION
202D 318 X0 006 A1
MODEL CAPACITANCE CAPACITANCE
TOLERANCE
DC VOLTAGE RATING
AT + 85 °C
CASE CODE
200D = Negative terminal
connected to case
(Available only in “A” cases)
202D = Both terminals
insulated from case
This is expressed in picofarads.
The first two digits are the
significant figures. The third is
the number of zeros to follow.
X0 = ± 20 %
X9 = ± 10 %
This is expressed in volts.
To complete the
three-digit block, zeros
precede the voltage rating.
See
Dimensional
Configurations
DIMENSIONS in inches [millimeters]
Model 200D Model 202D
Series “A” case
0.067 [1.70]
DIA. HOLE
0.203 ± 0.031
[5.16 ± 0.79]
C
L
0.625 ± 0.015
[15.88 ± 0.38]
1.275 ± 0.015
[32.39 ± 0.38]
C
L
0.062 x 0.125
[1.57 x 3.18]
HOLE
0.266 ± 0.031
[6.76 ± 0.79]
H ± 0.031
[0.79]
0.625 ± 0.015
[15.88 ± 0.38]
C
L
0.625 ± 0.015
[15.88 ± 0.38]
0.720 ± 0.031
[18.29 ± 0.79]
1.305 ± 0.031
[33.15 ± 0.79]
90° ± 1°
90° ± 1°
Series “B” case
0.062 x 0.125
[1.57 x 3.18]
Hole
H ± 0.062
[1.57]
1.593 ± 0.062
[40.46 ± 1.57]
C
L
0.281 ± 0.031
[7.14 ± 0.79]
C
L1.000
± 0.062
[25.4 ± 1.57]
0.750 ± 0.015
[19.05 ± 0.38]
200D, 202D
www.vishay.com Vishay
Revision: 04-Jan-12 2Document Number: 40027
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DIMENSIONS in inches [millimeters]
CASE
CODE
H
CASE HEIGHT
TYPICAL
WEIGHT (g)
A1 1.062 [26.97] 45
A2 1.375 [34.93] 60
A3 1.625 [41.28] 80
A4 2.000 [50.80] 100
A5 2.500 [63.50] 125
B1 1.500 [38.10] 170
B2 1.875 [47.63] 210
B3 2.250 [57.15] 250
B4 2.625 [66.68] 290
B5 3.000 [76.20] 335
B6 3.375 [85.73] 380
B7 3.750 [95.25] 420
D3 1.625 [41.28] 120
STANDARD RATINGS TYPE 200D
CAPACITANCE
(μF) CASE CODE PART NUMBER (1) MAX. ESR
AT + 25 °C
()
MAX. IMP.
AT - 55 °C
()
MAX. RMS
RIPPLE
120 Hz (A)
15 VDC AT + 85 °C; 10 VDC AT + 125 °C
960.0 A1 200D967X0015A1 0.25 3.1 1.17
1200.0 A2 200D128X0015A2 0.21 2.3 1.45
1400.0 A3 200D148X0015A3 0.18 1.7 1.67
1600.0 A1 200D168X0015A1 0.25 4.2 1.20
2100.0 A2 200D218X0015A2 0.19 3.1 1.52
2100.0 A4 200D218X0015A4 0.12 1.3 2.22
2400.0 A5 200D248X0015A5 0.10 1.15 2.66
2700.0 A3 200D278X0015A3 0.15 2.5 1.83
3200.0 A4 200D328X0015A4 0.13 2.1 2.13
4300.0 A5 200D438X0015A5 0.095 1.6 2.73
20 VDC AT + 85 °C; 13 VDC AT + 125 °C
1300.0 A1 200D138X0020A1 0.25 5.0 1.20
1700.0 A2 200D178X0020A2 0.19 3.8 1.52
2200.0 A3 200D228X0020A3 0.15 3.0 1.83
2700.0 A4 200D278X0020A4 0.13 2.5 2.13
3500.0 A5 200D358X0020A5 0.094 1.9 2.75
25 VDC AT + 85 °C; 15 VDC AT + 125 °C
1100.0 A1 200D118X0025A1 0.30 5.3 1.10
1400.0 A2 200D148X0025A2 0.23 4.0 1.38
1800.0 A3 200D188X0025A3 0.18 3.2 1.67
2200.0 A4 200D228X0025A4 0.15 2.7 1.98
2900.0 A5 200D298X0025A5 0.11 2.0 2.54
30 VDC AT + 85 °C; 20 VDC AT + 125 °C
520.0 A1 200D527X0030A1 0.48 5.3 0.87
660.0 A2 200D667X0030A2 0.38 4.2 1.08
820.0 A3 200D827X0030A3 0.31 2.9 1.27
900.0 A1 200D907X0030A1 0.37 5.8 0.99
1200.0 A2 200D128X0030A2 0.27 4.4 1.28
1200.0 A4 200D128X0030A4 0.21 2.3 1.68
1300.0 A5 200D138X0030A5 0.19 2.1 1.93
1500.0 A3 200D158X0030A3 0.22 3.5 1.50
1800.0 A4 200D188X0030A4 0.18 2.9 1.81
2400.0 A5 200D248X0030A5 0.14 2.2 2.25
Note
(1) The part numbers listed are for ± 20 % tolerance. To specify ± 10 % tolerance, change the digit following “X” from “0” to “9”. For
requirements or ratings other than those listed, please contact a Vishay representative.
Series “D” case
45°
CL
CL
0.281 ± 0.062
[7.14 ± 1.57]
0.140 ± 0.031
[3.56 ± 0.79]
0.531 ± 0.031
[13.49 ± 0.79]
0.265 ± 0.015
[6.73 ± 0.38]
0.138 [3.51] NOM.
(6-32 NC 2A THD.)
0.140 x 0.125
[1.57 x 3.18] HOLE
0.375 ± 0.062
[9.53 ± 1.57]
H ± 0.031
[0.79]
0.875 ± 0.031
[22.23 ± 0.79]
0.875 ± 0.031
[22.23 ± 0.79]
200D, 202D
www.vishay.com Vishay
Revision: 04-Jan-12 3Document Number: 40027
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
35 VDC AT + 85 °C; 22 VDC AT + 125 °C
720.0 A1 200D727X0035A1 0.37 6.3 0.99
960.0 A2 200D967X0035A2 0.27 4.7 1.28
1200.0 A3 200D128X0035A3 0.22 3.8 1.51
1400.0 A4 200D148X0035A4 0.18 3.2 1.81
1900.0 A5 200D198X0035A5 0.14 2.4 2.25
40 VDC AT + 85 °C; 25 VDC AT + 125 °C
600.0 A1 200D607X0040A1 0.33 6.7 1.04
800.0 A2 200D807X0040A2 0.25 5.0 1.33
1000.0 A3 200D108X0040A3 0.20 4.0 1.58
1200.0 A4 200D128X0040A4 0.17 3.3 1.86
1600.0 A5 200D168X0040A5 0.13 2.5 2.34
50 VDC AT + 85 °C; 35 VDC AT + 125 °C
400.0 A1 200D407X0050A1 0.50 7.2 0.85
430.0 A1 200D437X0050A1 0.58 6.4 0.79
490.0 A1 200D497X0050A1 0.33 7.2 1.04
500.0 A2 200D507X0050A2 0.40 5.6 1.05
600.0 A3 200D607X0050A3 0.33 4.1 1.23
660.0 A2 200D667X0050A2 0.25 5.4 1.33
800.0 A4 200D807X0050A4 0.25 3.1 1.54
820.0 A3 200D827X0050A3 0.20 4.3 1.58
980.0 A4 200D987X0050A4 0.17 3.6 1.86
1000.0 A5 200D108X0050A5 0.25 2.8 2.84
1300.0 A5 200D138X0050A5 0.13 2.7 2.34
60 VDC AT + 85 °C; 40 VDC AT + 125 °C
410.0 A1 200D417X0060A1 0.33 7.5 1.04
550.0 A2 200D557X0060A2 0.25 5.6 1.33
680.0 A3 200D687X0060A3 0.20 4.5 1.58
820.0 A4 200D827X0060A4 0.17 3.7 1.86
1100.0 A5 200D118X0060A5 0.13 2.8 2.34
75 VDC AT + 85 °C; 50 VDC AT + 125 °C
270.0 A1 200D277X0075A1 0.56 8.5 0.80
330.0 A2 200D337X0075A2 0.46 7.0 0.98
400.0 A1 200D407X0075A1 0.26 7.5 1.18
400.0 A3 200D407X0075A3 0.38 5.0 1.15
530.0 A2 200D537X0075A2 0.20 5.6 1.48
660.0 A3 200D667X0075A3 0.16 4.5 1.77
600.0 A4 200D607X0075A4 0.25 3.65 1.54
660.0 A5 200D667X0075A5 0.23 3.5 1.76
790.0 A4 200D797X0075A4 0.13 3.7 2.13
110.0 A5 200D118X0075A5 0.096 2.8 2.72
85 VDC AT + 85 °C; 60 VDC AT + 125 °C
280.0 A1 200D287X0085A1 0.33 9.2 1.04
370.0 A2 200D377X0085A2 0.25 6.9 1.33
470.0 A3 200D477X0085A3 0.20 5.5 1.58
570.0 A4 200D577X0085A4 0.17 4.6 1.86
750.0 A5 200D757X0085A5 0.13 3.4 2.34
STANDARD RATINGS TYPE 200D
CAPACITANCE
(μF) CASE CODE PART NUMBER (1) MAX. ESR
AT + 25 °C
()
MAX. IMP.
AT - 55 °C
()
MAX. RMS
RIPPLE
120 Hz (A)
Note
(1) The part numbers listed are for ± 20 % tolerance. To specify ± 10 % tolerance, change the digit following “X” from “0” to “9”. For
requirements or ratings other than those listed, please contact a Vishay representative.
200D, 202D
www.vishay.com Vishay
Revision: 04-Jan-12 4Document Number: 40027
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
100 VDC AT + 85 °C; 70 VDC AT + 125 °C
170.0 A1 200D177X0100A1 0.94 15.0 0.62
220.0 A2 200D227X0100A2 0.72 11.6 0.78
260.0 A1 200D267X0100A1 0.40 8.3 0.95
260.0 A3 200D267X0100A3 0.61 8.0 0.91
350.0 A2 200D357X0100A2 0.30 6.2 1.21
350.0 A4 200D357X0100A4 0.45 6.5 1.15
440.0 A3 200D447X0100A3 0.24 5.0 1.44
440.0 A5 200D447X0100A5 0.36 5.8 1.40
530.0 A4 200D537X0100A4 0.20 4.2 1.72
700.0 A5 200D707X0100A5 0.15 3.1 2.18
125 VDC AT + 85 °C; 80 VDC AT + 125 °C
170.0 A1 200D177X0125A1 0.40 15.0 0.95
220.0 A2 200D227X0125A2 0.30 12.0 1.21
280.0 A3 200D287X0125A3 0.24 9.0 1.44
340.0 A4 200D347X0125A4 0.20 7.5 1.72
150 VDC AT + 85 °C; 100 VDC AT + 125 °C
70.0 A1 200D706X0150A1 2.27 28.8 0.40
90.0 A2 200D906X0150A2 1.77 22.4 0.50
100.0 A3 200D107X0150A3 1.59 16.4 0.56
140.0 A4 200D147X0150A4 1.14 12.4 0.72
180.0 A5 200D187X0150A5 0.88 11.2 0.90
STANDARD RATINGS TYPE 202D
CAPACITANCE
(μF) CASE CODE PART NUMBER (1)
MAX. ESR
AT + 25 °C
()
MAX. IMP.
AT - 55 °C
()
MAX. RMS
RIPPLE
120 Hz (A)
15 VDC AT + 85 °C; 10 VDC AT + 125 °C
960.0 A1 202D967X0015A1 0.25 3.1 1.17
1200.0 A2 202D128X0015A2 0.21 2.3 1.45
1400.0 A3 202D148X0015A3 0.18 1.7 1.67
1600.0 A1 202D168X0015A1 0.25 4.2 1.20
2100.0 A2 202D218X0015A2 0.19 3.1 1.52
2100.0 A4 202D218X0015A4 0.12 1.3 2.22
2200.0 D3 202D228X0015D3 0.30 5.8 1.14
2400.0 A5 202D248X0015A5 0.10 1.15 2.66
2700.0 A3 202D278X0015A3 0.15 2.5 1.83
3200.0 A4 202D328X0015A4 0.13 2.1 2.13
3300.0 B1 202D338X0015B1 0.14 3.2 2.17
4300.0 A5 202D438X0015A5 0.095 1.6 2.73
4500.0 B2 202D458X0015B2 0.11 2.4 2.65
5600.0 B3 202D568X0015B3 0.085 1.9 3.24
6700.0 B4 202D678X0015B4 0.070 1.6 3.80
7800.0 B5 202D788X0015B5 0.061 1.4 4.28
9000.0 B6 202D908X0015B6 0.053 1.2 4.84
10 000.0 B7 202D109X0015B7 0.047 1.1 5.38
Note
(1) The part numbers listed are for ± 20 % tolerance. To specify ± 10 % tolerance, change the digit following “X” from “0” to “9”. For
requirements or ratings other than those listed, please contact a Vishay representative.
STANDARD RATINGS TYPE 200D
CAPACITANCE
(μF) CASE CODE PART NUMBER (1) MAX. ESR
AT + 25 °C
()
MAX. IMP.
AT - 55 °C
()
MAX. RMS
RIPPLE
120 Hz (A)
Note
(1) The part numbers listed are for ± 20 % tolerance. To specify ± 10 % tolerance, change the digit following “X” from “0” to “9”. For
requirements or ratings other than those listed, please contact a Vishay representative.
200D, 202D
www.vishay.com Vishay
Revision: 04-Jan-12 5Document Number: 40027
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
20 VDC AT + 85 °C; 13 VDC AT + 125 °C
1300.0 A1 202D138X0020A1 0.25 5.0 1.20
1700.0 A2 202D178X0020A2 0.19 3.8 1.52
1900.0 D3 202D198X0020D3 0.21 5.0 1.36
2200.0 A3 202D228X0020A3 0.15 3.0 1.83
2700.0 A4 202D278X0020A4 0.13 2.5 2.13
2800.0 B1 202D288X0020B1 0.14 3.3 2.17
3500.0 A5 202D358X0020A5 0.094 1.9 2.75
3800.0 B2 202D388X0020B2 0.11 2.5 2.65
4700.0 B3 202D478X0020B3 0.085 2.0 3.24
5600.0 B4 202D568X0020B4 0.071 1.7 3.77
6600.0 B5 202D668X0020B5 0.061 1.4 4.28
7500.0 B6 202D758X0020B6 0.053 1.3 4.84
8500.0 B7 202D858X0020B7 0.047 1.1 5.38
25 VDC AT + 85 °C; 15 VDC AT + 125 °C
1100.0 A1 202D118X0025A1 0.30 5.3 1.10
1400.0 A2 202D148X0025A2 0.23 4.0 1.38
1600.0 D3 202D168X0025D3 0.21 5.3 1.36
1800.0 A3 202D188X0025A3 0.18 3.2 1.67
2200.0 A4 202D228X0025A4 0.15 2.7 1.98
2300.0 B1 202D238X0025B1 0.14 3.5 2.17
2900.0 A5 202D298X0025A5 0.11 2.0 2.54
3100.0 B2 202D318X0025B2 0.11 2.6 2.65
3900.0 B3 202D398X0025B3 0.085 2.1 3.24
4700.0 B4 202D478X0025B4 0.071 1.8 3.77
5500.0 B5 202D558X0025B5 0.061 1.5 4.28
6200.0 B6 202D628X0025B6 0.053 1.3 4.84
7000.0 B7 202D708X0025B7 0.047 1.2 5.38
30 VDC AT + 85 °C; 20 VDC AT + 125 °C
520.0 A1 202D527X0030A1 0.48 5.3 0.87
660.0 A2 202D667X0030A2 0.38 4.2 1.08
820.0 A3 202D827X0030A3 0.31 2.9 1.27
900.0 A1 202D907X0030A1 0.37 5.8 0.99
1200.0 A2 202D128X0030A2 0.27 4.4 1.28
1200.0 A4 202D128X0030A4 0.21 2.3 1.68
1300.0 A5 202D138X0030A5 0.19 2.1 1.93
1300.0 D3 202D138X0030D3 0.26 5.5 1.22
1500.0 A3 202D158X0030A3 0.22 3.5 1.50
1800.0 A4 202D188X0030A4 0.18 2.9 1.81
2000.0 B1 202D208X0030B1 0.17 1.7 1.97
2400.0 A5 202D248X0030A5 0.14 2.2 2.25
2600.0 B2 202D268X0030B2 0.13 2.8 2.43
3300.0 B3 202D338X0030B3 0.10 2.2 2.98
4000.0 B4 202D408X0030B4 0.085 1.8 3.45
4600.0 B5 202D468X0030B5 0.073 1.6 3.92
5300.0 B6 202D538X0030B6 0.064 1.4 4.40
6000.0 B7 202D608X0030B7 0.057 1.2 4.88
STANDARD RATINGS TYPE 202D
CAPACITANCE
(μF) CASE CODE PART NUMBER (1)
MAX. ESR
AT + 25 °C
()
MAX. IMP.
AT - 55 °C
()
MAX. RMS
RIPPLE
120 Hz (A)
Note
(1) The part numbers listed are for ± 20 % tolerance. To specify ± 10 % tolerance, change the digit following “X” from “0” to “9”. For
requirements or ratings other than those listed, please contact a Vishay representative.
200D, 202D
www.vishay.com Vishay
Revision: 04-Jan-12 6Document Number: 40027
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
35 VDC AT + 85 °C; 22 VDC AT + 125 °C
720.0 A1 202D727X0035A1 0.37 6.3 0.99
960.0 A2 202D967X0035A2 0.27 4.7 1.28
1100.0 D3 202D118X0035D3 0.30 5.7 1.14
1200.0 A3 202D128X0035A3 0.22 3.8 1.51
1400.0 A4 202D148X0035A4 0.18 3.2 1.81
1600.0 B1 202D168X0035B1 0.20 3.8 1.82
1900.0 A5 202D198X0035A5 0.14 2.4 2.25
2200.0 B2 202D228X0035B2 0.15 2.9 2.27
2700.0 B3 202D278X0035B3 0.12 2.3 2.72
3200.0 B4 202D328X0035B4 0.10 1.9 3.18
3800.0 B5 202D388X0035B5 0.085 1.6 3.63
4300.0 B6 202D438X0035B6 0.075 1.4 4.07
4900.0 B7 202D498X0035B7 0.067 1.3 4.51
40 VDC AT + 85 °C; 25 VDC AT + 125 °C
600.0 A1 202D607X0040A1 0.33 6.7 1.04
800.0 A2 202D807X0040A2 0.25 5.0 1.33
880.0 D3 202D887X0040D3 0.30 6.0 1.14
1000.0 A3 202D108X0040A3 0.20 4.0 1.58
1200.0 A4 202D128X0040A4 0.17 3.3 1.86
1300.0 B1 202D138X0040B1 0.20 4.0 1.82
1600.0 A5 202D168X0040A5 0.13 2.5 2.34
1800.0 B2 202D188X0040B2 0.15 3.0 2.27
2200.0 B3 202D228X0040B3 0.12 2.4 2.72
2600.0 B4 202D268X0040B4 0.10 2.0 3.18
3100.0 B5 202D318X0040B5 0.086 1.7 3.61
3500.0 B6 202D358X0040B6 0.075 1.5 4.07
4000.0 B7 202D408X0040B7 0.057 1.3 4.51
50 VDC AT + 85 °C; 35 VDC AT + 125 °C
400.0 A1 202D407X0050A1 0.50 7.2 0.85
430.0 A1 202D437X0050A1 0.58 6.4 0.79
490.0 A1 202D497X0050A1 0.33 7.2 1.04
500.0 A2 202D507X0050A2 0.40 5.6 1.05
600.0 A3 202D607X0050A3 0.33 4.1 1.23
660.0 A2 202D667X0050A2 0.25 5.4 1.33
720.0 D3 202D727X0050D3 0.30 6.2 1.14
800.0 A4 202D807X0050A4 0.25 3.1 1.54
820.0 A3 202D827X0050A3 0.20 4.3 1.58
980.0 A4 202D987X0050A4 0.17 3.6 1.86
1000.0 A5 202D108X0050A5 0.25 2.8 2.84
1100.0 B1 202D118X0050B1 0.20 4.2 1.82
1300.0 A5 202D138X0050A5 0.13 2.7 2.34
1400.0 B2 202D148X0050B2 0.15 3.1 2.27
1800.0 B3 202D188X0050B3 0.12 2.5 2.72
2200.0 B4 202D228X0050B4 0.10 2.0 3.18
2500.0 B5 202D258X0050B5 0.086 1.8 3.61
2900.0 B6 202D298X0050B6 0.075 1.6 4.07
3200.0 B7 202D328X0050B7 0.067 1.4 4.51
STANDARD RATINGS TYPE 202D
CAPACITANCE
(μF) CASE CODE PART NUMBER (1)
MAX. ESR
AT + 25 °C
()
MAX. IMP.
AT - 55 °C
()
MAX. RMS
RIPPLE
120 Hz (A)
Note
(1) The part numbers listed are for ± 20 % tolerance. To specify ± 10 % tolerance, change the digit following “X” from “0” to “9”. For
requirements or ratings other than those listed, please contact a Vishay representative.
200D, 202D
www.vishay.com Vishay
Revision: 04-Jan-12 7Document Number: 40027
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
60 VDC AT + 85 °C; 40 VDC AT + 125 °C
410.0 A1 202D417X0060A1 0.33 7.5 1.04
550.0 A2 202D557X0060A2 0.25 5.6 1.33
600.0 D3 202D607X0060A2 0.33 6.5 1.09
680.0 A3 202D687X0060A3 0.20 4.5 1.58
820.0 A4 202D827X0060A4 0.17 3.7 1.86
900.0 B1 202D907X0060A2 0.22 4.3 1.73
1100.0 A5 202D118X0060A5 0.13 2.8 2.34
1200.0 B2 202D128X0060B2 0.16 3.3 2.19
1500.0 B3 202D158X0060B3 0.13 2.6 2.62
1800.0 B4 202D188X0060B4 0.11 2.2 3.03
2100.0 B5 202D218X0060B4 0.093 1.9 3.47
2400.0 B6 202D248X0060B6 0.081 1.6 3.9
2700.0 B7 202D278X0060B7 0.072 1.4 4.35
75 VDC AT + 85 °C; 50 VDC AT + 125 °C
270.0 A1 202D277X0075A1 0.56 8.5 0.80
330.0 A2 202D337X0075A2 0.46 7.0 0.98
400.0 A1 202D407X0075A1 0.26 7.5 1.18
400.0 A3 202D407X0075A3 0.38 5.0 1.15
530.0 A2 202D537X0075A2 0.20 5.6 1.48
480.0 D3 202D487X0075D3 0.42 6.8 0.96
660.0 A3 202D667X0075A3 0.16 4.5 1.77
600.0 A4 202D607X0075A4 0.25 3.65 1.54
660.0 A5 202D667X0075A5 0.23 3.5 1.76
790.0 A4 202D797X0075A4 0.13 3.7 2.13
720.0 B1 202D727X0075B1 0.28 4.5 1.54
110.0 A5 202D118X0075A5 0.096 2.8 2.72
960.0 B2 202D967X0075B2 0.21 3.4 1.91
1200.0 B3 202D128X0075B3 0.17 2.7 2.29
1400.0 B4 202D148X0075B4 0.14 2.1 2.69
1700.0 B5 202D178X0075B5 0.12 1.9 3.06
1900.0 B6 202D198X0075B6 0.11 1.7 3.36
2200.0 B7 202D228X0075B7 0.095 1.5 3.78
85 VDC AT + 85 °C; 60 VDC AT + 125 °C
280.0 A1 202D287X0085A1 0.33 9.2 1.04
370.0 A2 202D377X0085A2 0.25 6.9 1.33
400.0 D3 202D407X0085D3 0.42 7.0 0.96
470.0 A3 202D477X0085A3 0.20 5.5 1.58
570.0 A4 202D577X0085A4 0.17 4.6 1.86
600.0 B1 202D607X0085B1 0.28 4.7 1.54
750.0 A5 202D757X0085A5 0.13 3.4 2.34
800.0 B2 202D807X0085B2 0.21 3.5 1.91
1000.0 B3 202D108X0085B3 0.17 2.8 2.29
1200.0 B4 202D128X0085B4 0.14 2.4 2.69
1400.0 B5 202D148X0085B5 0.12 2.0 3.06
1600.0 B6 202D168X0085B6 0.11 1.8 3.36
1800.0 B7 202D188X0085B7 0.095 1.6 3.78
STANDARD RATINGS TYPE 202D
CAPACITANCE
(μF) CASE CODE PART NUMBER (1)
MAX. ESR
AT + 25 °C
()
MAX. IMP.
AT - 55 °C
()
MAX. RMS
RIPPLE
120 Hz (A)
Note
(1) The part numbers listed are for ± 20 % tolerance. To specify ± 10 % tolerance, change the digit following “X” from “0” to “9”. For
requirements or ratings other than those listed, please contact a Vishay representative.
200D, 202D
www.vishay.com Vishay
Revision: 04-Jan-12 8Document Number: 40027
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
100 VDC AT + 85 °C; 70 VDC AT + 125 °C
170.0 A1 202D177X0100A1 0.94 15.0 0.62
220.0 A2 202D227X0100A2 0.72 11.6 0.78
260.0 A1 202D267X0100A1 0.40 8.3 0.95
260.0 A3 202D267X0100A3 0.61 8.0 0.91
340.0 D3 202D347X0100D3 0.75 7.5 0.72
350.0 A2 202D357X0100A2 0.30 6.2 1.21
350.0 A4 202D357X0100A4 0.45 6.5 1.15
440.0 A3 202D447X0100A3 0.24 5.0 1.44
440.0 A5 202D447X0100A5 0.36 5.8 1.40
510.0 B1 202D517X0100B1 0.28 4.8 1.54
530.0 A4 202D537X0100A4 0.20 4.2 1.72
680.0 B2 202D687X0100B2 0.21 3.6 1.91
700.0 A5 202D707X0100A5 0.15 3.1 2.18
850.0 B3 202D857X0100B3 0.17 2.9 2.29
1000.0 B4 202D108X0100B4 0.14 2.4 2.69
1200.0 B5 202D128X0100B5 0.12 2.1 3.06
1400.0 B6 202D148X0100B6 0.11 1.8 3.36
1500.0 B7 202D158X0100B7 0.095 1.6 3.78
125 VDC AT + 85 °C; 80 VDC AT + 125 °C
170.0 A1 202D177X0125A1 0.40 15.0 0.95
220.0 A2 202D227X0125A2 0.30 12.0 1.21
220.0 D3 202D227X0125D3 0.42 8.0 0.96
280.0 A3 202D287X0125A3 0.24 9.0 1.44
340.0 A4 202D347X0125A4 0.20 7.5 1.72
340.0 B1 202D347X0125B1 0.28 5.4 1.54
560.0 B3 202D567X0125B3 0.17 3.2 2.29
670.0 B4 202D677X0125B4 0.14 2.7 2.69
790.0 B5 202D797X0125B5 0.12 2.4 3.06
900.0 B6 202D907X0125B6 0.11 2.0 3.38
1000.0 B7 202D108X0125B7 0.095 1.8 3.78
150 VDC AT + 85 °C; 100 VDC AT + 125 °C
70.0 A1 202D706X0150A1 2.27 28.8 0.40
90.0 A2 202D906X0150A2 1.77 22.4 0.50
100.0 A3 202D107X0150A3 1.59 16.4 0.56
140.0 A4 202D147X0150A4 1.14 12.4 0.72
180.0 A5 202D187X0150A5 0.88 11.2 0.90
STANDARD RATINGS TYPE 202D
CAPACITANCE
(μF) CASE CODE PART NUMBER (1)
MAX. ESR
AT + 25 °C
()
MAX. IMP.
AT - 55 °C
()
MAX. RMS
RIPPLE
120 Hz (A)
Note
(1) The part numbers listed are for ± 20 % tolerance. To specify ± 10 % tolerance, change the digit following “X” from “0” to “9”. For
requirements or ratings other than those listed, please contact a Vishay representative.
200D, 202D
www.vishay.com Vishay
Revision: 04-Jan-12 9Document Number: 40027
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
EXTENDED RATINGS TYPE 200D
CAPACITANCE
(μF) CASE CODE PART NUMBER
MAX. ESR
AT + 25 °C
()
MAX. IMP.
AT - 55 °C
()
MAX. RMS
RIPPLE
120 Hz (A)
6 VDC AT + 85 °C; 4 VDC AT + 125 °C
6600.0 A1 200D668X0006A1 0.28 2.3 1.13
8200.0 A2 200D828X0006A2 0.22 1.8 1.41
9900.0 A3 200D998X0006A3 0.18 1.5 1.67
13 000.0 A4 200D139X0006A4 0.14 1.1 2.05
8 VDC AT + 85 °C; 5 VDC AT + 125 °C
5400.0 A1 200D548X0008A1 0.28 2.8 1.13
6800.0 A2 200D688X0008A2 0.22 2.2 1.41
8200.0 A3 200D828X0008A3 0.18 1.8 1.67
11000.0 A4 200D119X0008A4 0.14 1.4 2.05
14 000.0 A5 200D149X0008A5 0.11 1.1 2.35
10 VDC AT + 85 °C; 7 VDC AT + 125 °C
4500.0 A1 200D458X0010A1 0.28 3.4 1.13
5600.0 A2 200D568X0010A2 0.22 2.7 1.41
6800.0 A3 200D688X0010A3 0.18 2.2 1.67
9000.0 A4 200D908X0010A4 0.14 1.7 2.05
11 000.0 A5 200D119X0010A5 0.11 1.4 2.35
15 VDC AT + 85 °C; 10 VDC AT + 125 °C
3100.0 A1 200D318X0015A1 0.28 3.9 1.13
3900.0 A2 200D398X0015A2 0.22 3.1 1.41
4700.0 A3 200D478X0015A3 0.18 2.6 1.67
6200.0 A4 200D628X0015A4 0.14 1.9 2.05
7800.0 A5 200D788X0015A5 0.11 1.6 2.54
20 VDC AT + 85 °C; 13 VDC AT + 125 °C
2600.0 A1 200D268X0020A1 0.28 3.9 1.13
3300.0 A2 200D338X0020A2 0.22 3.1 1.41
4000.0 A3 200D408X0020A3 0.18 2.6 1.67
5300.0 A4 200D538X0020A4 0.14 1.9 2.05
6600.0 A5 200D668X0020A5 0.11 1.6 2.54
25 VDC AT + 85 °C; 15 VDC AT + 125 °C
2200.0 A1 200D228X0025A1 0.28 4.1 1.13
2700.0 A2 200D278X0025A2 0.22 3.3 1.41
3200.0 A3 200D328X0025A3 0.18 2.8 1.67
4300.0 A4 200D438X0025A4 0.14 2.1 2.05
5400.0 A5 200D548X0025A5 0.11 1.7 2.54
30 VDC AT + 85 °C; 20 VDC AT + 125 °C
1800.0 A1 200D188X0030A1 0.28 4.5 1.13
2200.0 A2 200D228X0030A2 0.22 3.6 1.41
2600.0 A3 200D268X0030A3 0.18 3.0 1.67
3500.0 A4 200D358X0030A4 0.14 2.3 2.05
4400.0 A5 200D448X0030A5 0.11 1.8 2.54
Note
(1) The part numbers listed are for ± 20 % tolerance. To specify ± 10 % tolerance, change the digit following “X” from “0” to “9”. For
requirements or ratings other than those listed, please contact a Vishay representative.
200D, 202D
www.vishay.com Vishay
Revision: 04-Jan-12 10 Document Number: 40027
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
35 VDC AT + 85 °C; 22 VDC AT + 125 °C
1400.0 A1 200D148X0035A1 0.28 5.1 1.13
1800.0 A2 200D188X0035A2 0.22 4.1 1.41
2200.0 A3 200D228X0035A3 0.18 3.4 1.67
2900.0 A4 200D298X0035A4 0.14 2.6 2.05
3600.0 A5 200D368X0035A5 0.11 2.1 2.54
40 VDC AT + 85 °C; 25 VDC AT + 125 °C
1200.0 A1 200D128X0040A1 0.28 5.5 1.13
1500.0 A2 200D158X0040A2 0.22 4.4 1.41
1800.0 A3 200D188X0040A3 0.18 3.7 1.67
2400.0 A4 200D248X0040A4 0.14 2.8 2.05
3000.0 A5 200D308X0040A5 0.11 2.3 2.54
50 VDC AT + 85 °C; 35 VDC AT + 125 °C
960.0 A1 200D967X0050A1 0.28 6.1 1.13
1200.0 A2 200D128X0050A2 0.22 4.9 1.14
1400.0 A3 200D148X0050A3 0.18 4.1 1.67
1900.0 A4 200D198X0050A4 0.14 3.1 2.05
2400.0 A5 200D248X0050A5 0.11 2.5 2.54
60 VDC AT + 85 °C; 40 VDC AT + 125 °C
800.0 A1 200D807X0060A1 0.28 6.8 1.13
1000.0 A2 200D108X0060A2 0.22 5.4 1.41
1200.0 A3 200D128X0060A3 0.18 4.5 1.67
1600.0 A4 200D168X0060A4 0.14 3.4 2.05
2000.0 A5 200D208X0060A5 0.11 2.7 2.54
75 VDC AT + 85 °C; 50 VDC AT + 125 °C
650.0 A1 200D657X0075A1 0.28 7.9 1.13
820.0 A2 200D827X0075A2 0.22 6.3 1.41
980.0 A3 200D987X0075A3 0.18 5.2 1.64
1300.0 A4 200D138X0075A4 0.14 3.9 2.05
1600.0 A5 200D168X0075A5 0.11 3.2 2.54
EXTENDED RATINGS TYPE 200D
CAPACITANCE
(μF) CASE CODE PART NUMBER
MAX. ESR
AT + 25 °C
()
MAX. IMP.
AT - 55 °C
()
MAX. RMS
RIPPLE
120 Hz (A)
Note
(1) The part numbers listed are for ± 20 % tolerance. To specify ± 10 % tolerance, change the digit following “X” from “0” to “9”. For
requirements or ratings other than those listed, please contact a Vishay representative.
200D, 202D
www.vishay.com Vishay
Revision: 04-Jan-12 11 Document Number: 40027
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
EXTENDED RATINGS TYPE 202D
CAPACITANCE
(μF) CASE CODE PART NUMBER
MAX. ESR
AT + 25 °C
()
MAX. IMP.
AT - 55 °C
()
MAX. RMS
RIPPLE
120 Hz (A)
6 VDC AT + 85 °C; 4 VDC AT + 125 °C
6600.0 A1 202D668X0006A1 0.28 2.3 1.13
8200.0 A2 202D828X0006A2 0.22 1.8 1.41
9900.0 A3 202D998X0006A3 0.18 1.5 1.67
12 000.0 B1 202D129X0006B1 0.11 0.90 2.54
13 000.0 A4 202D139X0006A4 0.14 1.1 2.05
15 000.0 A5 202D159X0006A5 0.12 1.8 2.35
8 VDC AT + 85 °C; 5 VDC AT + 125 °C
5400.0 A1 202D548X0008A1 0.28 2.8 1.13
6800.0 A2 202D688X0008A2 0.22 2.2 1.41
8200.0 A3 202D828X0008A3 0.18 1.8 1.67
9600.0 B1 202D968X0008B1 0.12 1.8 2.54
11000.0 A4 202D119X0008A4 0.14 1.4 2.05
12 000.0 B2 202D129X0008B2 0.086 1.3 2.99
14 000.0 A5 202D149X0008A5 0.11 1.1 2.35
10 VDC AT + 85 °C; 7 VDC AT + 125 °C
4500.0 A1 202D458X0010A1 0.28 3.4 1.13
5600.0 A2 202D568X0010A2 0.22 2.7 1.41
6800.0 A3 202D688X0010A3 0.18 2.2 1.67
9000.0 A4 202D908X0010A4 0.14 1.7 2.05
9600.0 B1 202D968X0010B1 0.12 1.8 2.54
11 000.0 A5 202D119X0010A5 0.11 1.4 2.35
15 VDC AT + 85 °C; 10 VDC AT + 125 °C
3100.0 A1 202D318X0015A1 0.28 3.9 1.13
3900.0 A2 202D398X0015A2 0.22 3.1 1.41
4700.0 A3 202D478X0015A3 0.18 2.6 1.67
6200.0 A4 202D628X0015A4 0.14 1.9 2.05
6560.0 B1 202D668X0015B1 0.16 2.2 2.03
7800.0 A5 202D788X0015A5 0.11 1.6 2.54
20 VDC AT + 85 °C; 13 VDC AT + 125 °C
2600.0 A1 202D268X0020A1 0.28 3.9 1.13
3300.0 A2 202D338X0020A2 0.22 3.1 1.41
4000.0 A3 202D408X0020A3 0.18 2.6 1.67
5300.0 A4 202D538X0020A4 0.14 1.9 2.05
6600.0 A5 202D668X0020A5 0.11 1.6 2.54
25 VDC AT + 85 °C; 15 VDC AT + 125 °C
2200.0 A1 202D228X0025A1 0.28 4.1 1.13
2700.0 A2 202D278X0025A2 0.22 3.3 1.41
3200.0 A3 202D328X0025A3 0.18 2.8 1.67
4300.0 A4 202D438X0025A4 0.14 2.1 2.05
5400.0 A5 202D548X0025A5 0.11 1.7 2.54
30 VDC AT + 85 °C; 20 VDC AT + 125 °C
1800.0 A1 202D188X0030A1 0.28 4.5 1.13
2200.0 A2 202D228X0030A2 0.22 3.6 1.41
2600.0 A3 202D268X0030A3 0.18 3.0 1.67
3500.0 A4 202D358X0030A4 0.14 2.3 2.05
4400.0 A5 202D448X0030A5 0.11 1.8 2.54
Note
(1) The part numbers listed are for ± 20 % tolerance. To specify ± 10 % tolerance, change the digit following “X” from “0” to “9”. For
requirements or ratings other than those listed, please contact a Vishay representative.
200D, 202D
www.vishay.com Vishay
Revision: 04-Jan-12 12 Document Number: 40027
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
35 VDC AT + 85 °C; 22 VDC AT + 125 °C
1400.0 A1 202D148X0035A1 0.28 5.1 1.13
1800.0 A2 202D188X0035A2 0.22 4.1 1.41
2200.0 A3 202D228X0035A3 0.18 3.4 1.67
2900.0 A4 202D298X0035A4 0.14 2.6 2.05
3600.0 A5 202D368X0035A5 0.11 2.1 2.54
3900.0 B1 202D398X0035B1 0.16 2.7 2.03
5500.0 B2 202D558X0035B2 0.11 1.9 2.64
7000.0 B3 202D708X0035B3 0.089 1.5 3.16
8600.0 B4 202D868X0035B4 0.073 1.2 3.72
10 000.0 B5 202D109X0035B5 0.062 1.0 4.25
12 000.0 B6 202D129X0035B6 0.053 0.90 4.84
13 000.0 B7 202D139X0035B7 0.047 0.79 5.38
40 VDC AT + 85 °C; 25 VDC AT + 125 °C
1200.0 A1 202D128X0040A1 0.28 5.5 1.13
1500.0 A2 202D158X0040A2 0.22 4.4 1.41
1800.0 A3 202D188X0040A3 0.18 3.7 1.67
2400.0 A4 202D248X0040A4 0.14 2.8 2.05
3000.0 A5 202D308X0040A5 0.11 2.3 2.54
50 VDC AT + 85 °C; 35 VDC AT + 125 °C
960.0 A1 202D967X0050A1 0.28 6.1 1.13
1200.0 A2 202D128X0050A2 0.22 4.9 1.14
1300.0 D3 202D138X0050D3 0.38 5.5 1.01
1400.0 A3 202D148X0050A3 0.18 4.1 1.67
1900.0 A4 202D198X0050A4 0.14 3.1 2.05
2400.0 A5 202D248X0050A5 0.11 2.5 2.54
60 VDC AT + 85 °C; 40 VDC AT + 125 °C
800.0 A1 202D807X0060A1 0.28 6.8 1.13
1000.0 A2 202D108X0060A2 0.22 5.4 1.41
1100.0 D3 202D118X0060D3 0.38 5.8 1.01
1200.0 A3 202D128X0060A3 0.18 4.5 1.67
1600.0 A4 202D168X0060A4 0.14 3.4 2.05
2000.0 A5 202D208X0060A5 0.11 2.7 2.54
75 VDC AT + 85 °C; 50 VDC AT + 125 °C
650.0 A1 202D657X0075A1 0.28 7.9 1.13
820.0 A2 202D827X0075A2 0.22 6.3 1.41
880.0 D3 202D887X0075D3 0.55 6.0 0.84
980.0 A3 202D987X0075A3 0.18 5.2 1.64
1300.0 A4 202D138X0075A4 0.14 3.9 2.05
1600.0 A5 202D168X0075A5 0.11 3.2 2.54
EXTENDED RATINGS TYPE 202D
CAPACITANCE
(μF) CASE CODE PART NUMBER
MAX. ESR
AT + 25 °C
()
MAX. IMP.
AT - 55 °C
()
MAX. RMS
RIPPLE
120 Hz (A)
Note
(1) The part numbers listed are for ± 20 % tolerance. To specify ± 10 % tolerance, change the digit following “X” from “0” to “9”. For
requirements or ratings other than those listed, please contact a Vishay representative.
200D, 202D
www.vishay.com Vishay
Revision: 04-Jan-12 13 Document Number: 40027
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
04021 RATINGS AND CASE CODES
DSCC
DRAWING 04021
CAPACITANCE
(μF) CASE CODE
MAX. DCL
(μA) MAX. IMPEDANCE
()
25 °C 85 °C AND 125 °C
15 VDC AT 85 °C RATED 17.2 VDC AT 85 °C SURGE 10 VDC AT 125 °C DERATED
04021-01 960 A1 7 58 3.10
04021-02 1200 A2 9 72 2.30
04021-03 1400 A3 11 84 1.70
04021-04 2100 A4 16 126 1.30
04021-05 2400 A5 18 144 1.15
30 VDC AT 85 °C RATED 34.5 VDC AT 85 °C SURGE 20 VDC AT 125 °C DERATED
04021-06 520 A1 8 63 5.30
04021-07 660 A2 10 80 4.20
04021-08 820 A3 13 99 2.90
04021-09 1200 A4 18 144 2.30
04021-10 1300 A5 20 156 2.10
50 VDC AT 85 °C RATED 57.5 VDC AT 85 °C SURGE 30 VDC AT 125 °C DERATED
04021-11 400 A1 10 80 7.20
04021-12 430 A1 10 78 6.40
04021-13 500 A2 13 100 5.60
04021-14 600 A3 15 120 4.10
04021-15 800 A4 20 160 3.10
04021-16 1000 A5 23 180 2.80
75 VDC AT 85 °C RATED 86.2 VDC AT 85 °C SURGE 50 VDC AT 125 °C DERATED
04021-17 270 A1 9 81 8.50
04021-18 330 A2 12 99 7.00
04021-19 400 A3 15 119 5.00
04021-20 600 A4 20 180 3.65
04021-21 660 A5 23 198 3.50
100 VDC AT 85 °C RATED 115.0 VDC AT 85 °C SURGE 65 VDC AT 125 °C DERATED
04021-22 170 A1 9 68 15.00
04021-23 220 A2 11 88 11.60
04021-24 260 A3 13 104 8.00
04021-25 350 A4 18 140 6.50
04021-26 440 A5 22 176 5.80
150 VDC AT 85 °C RATED 172.0 VDC AT 85 °C SURGE 100 VDC AT 125 °C DERATED
04021-27 70 A1 6 42 28.80
04021-28 90 A2 7 54 22.40
04021-29 100 A3 9 60 16.40
04021-30 140 A4 11 84 12.40
04021-31 180 A5 14 104 11.20
ORDERING INFORMATION - DSCC PART NUMBER
04021 -29
DSCC
DRAWING
NUMBER
DASH
NUMBER
DEFENSE SUPPLY CENTER,
COLUMBUS COLUMBUS, OHIO
DRAWING NO.
04021
200D, 202D
www.vishay.com Vishay
Revision: 04-Jan-12 14 Document Number: 40027
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
(1) Vishay is no longer qualified to provide military CL55 type which has been discontinued.
It has been replaced by an equivalent product built to DSCC drawing 04021
MILITARY SPECIFICATION TANTAPAK® CAPACITOR ASSEMBLIES - CROSS REFERENCE
CAPACITANCE
(μF)
RATED
VOLTAGE
AT + 85 °C
CASE
CODE
VISHAY
PART NUMBER
(DISCONTINUED)
CL55 TYPE (1)
DESIGNATION
(NEW)
DSCC DRAWING (1)
04021
960.0 15 A1 202D967X0015A1 CL55BE961MPG 04021-01
1200.0 15 A2 202D128X0015A2 CL55BE122MPG 04021-02
1400.0 15 A3 202D148X0015A3 CL55BE142MPG 04021-03
2100.0 15 A4 202D218X0015A4 CL55BE212MPG 04021-04
2400.0 15 A5 202D248X0015A5 CL55BE242MPG 04021-05
520.0 30 A1 202D527X0030A1 CL55BH521MPG 04021-06
660.0 30 A2 202D667X0030A2 CL55BH661MPG 04021-07
820.0 30 A3 202D827X0030A3 CL55BH821MPG 04021-08
1200.0 30 A4 202D128X0030A4 CL55BH122MPG 04021-09
1300.0 30 A5 202D138X0030A5 CL55BH132MPG 04021-10
400.0 50 A1 202D407X0050A1 CL55BJ401MPG 04021-11
430.0 50 A1 202D437X0050A1 CL55BJ431MPG 04021-12
500.0 50 A2 202D507X0050A2 CL55BJ501MPG 04021-13
600.0 50 A3 202D607X0050A3 CL55BJ601MPG 04021-14
800.0 50 A4 202D807X0050A4 CL55BJ801MPG 04021-15
1000.0 50 A5 202D108X0050A5 CL55BJ102MPG 04021-16
270.0 75 A1 202D277X0075A1 CL55BL271MPG 04021-17
330.0 75 A2 202D337X0075A2 CL55BL331MPG 04021-18
400.0 75 A3 202D407X0075A3 CL55BL401MPG 04021-19
600.0 75 A4 202D607X0075A4 CL55BL601MPG 04021-20
660.0 75 A5 202D667X0075A5 CL55BL661MPG 04021-21
170.0 100 A1 202D177X0100A1 CL55BN171MPG 04021-22
220.0 100 A2 202D227X0100A2 CL55BN221MPG 04021-23
260.0 100 A3 202D267X0100A3 CL55BN261MPG 04021-24
350.0 100 A4 202D357X0100A4 CL55BN351MPG 04021-25
440.0 100 A5 202D447X0100A5 CL55BN441MPG 04021-26
70.0 150 A1 202D706X0150A1 CL55BQ700MPG 04021-27
90.0 150 A2 202D906X0150A2 CL55BQ900MPG 04021-28
100.0 150 A3 202D107X0150A3 CL55BQ101MPG 04021-29
140.0 150 A4 202D147X0150A4 CL55BQ141MPG 04021-30
180.0 150 A5 202D187X0150A5 CL55BQ181MPG 04021-31
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 12-Mar-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
