T3DSO2000 Data Sheet
Oscilloscopes
Debug with Condence
100 MHz – 300 MHz
Front panel of the four channel series Front panel of the two channel series
Tools for Improved Debugging
Long Capture – 70 Mpts/Ch and 140 Mpts interleaved.  Capture more time and show more waveform detail.
Math and Measure – 7 basic math functions plus FFT
and 37 automatic measurement parameters.
 Extract results from waveforms and measurements.
Connectivity – USB for mass storage, printing and
PC control, plus LAN for fast data transfer.
  Save data for external analysis and screen images
for reports.
Optional Serial Bus Trigger and Decode – I2C, SPI,
UART, RS232, CAN, LIN.
  Debug serial buses directly in your Oscilloscope.
Waveform Sequence Recorder – record and play back
up to 80,000 waveforms.
  Replay the changing waveform history.
Optional MSO – 16 Digital Channels   Add mixed signal debugging to your Oscilloscope.
Key Specications
Bandwidth 100 MHz, 200 MHz, 300 MHz
Channels 2 or 4
Memory 70 Mpts/Ch (140 Mpts interleaved)
Sample Rate up to 2 GS/s (Interleaved)
Display 8"BrightTFTLCD(800x480)
Connectivity USB Host, USB Device, LAN
PRODUCT OVERVIEW
TheT3DSO2000seriesemploysanewgenerationof
high speed display technology that provides excellent
signalclarity,delityandperformance.Thesystemnoise
floor is also lower than similar products in the industry. It
comeswithaminimumverticalinputrangeof1mV/div,
an innovative digital trigger system with high sensitivity
andlowjitter,andawaveformcapturerateof500,000
waveforms/sec (sequence mode). The T3DSO2000 also
employsa256-levelintensitygradingdisplayfunction
andacolortemperaturedisplaymodewhichcomplement
the high speed update rate. Teledyne Test Tools latest
oscilloscope offering supports multiple powerful triggering
modesincludingserialbustriggering.Thereisalowcost
option for serial bus decoding of IIC, SPI, UART, CAN, LIN
T3DSO2102: 2 Channel 100 MHz
T3DSO2104: 4 Channel 100 MHz
T3DSO2202: 2 Channel 200 MHz
T3DSO2204: 4 Channel 200 MHz
T3DSO2302: 2 Channel 300 MHz
T3DSO2304: 4 Channel 300 MHz
Key Features
100 MHz, 200 MHz and 300 MHz bandwidth models
Real-timesamplingrateupto2Gsa/s
New generation of high speed display technology
› Waveform capture rate up to 140,000 wfm/s
(normalmode),and500,000wfm/s(sequence
mode)
›Supports256-levelintensitygradingandcolor
display modes Record length up to 140 Mpts
› Digital trigger system
Intelligent trigger: Edge, Slope, Pulse Width, Window,
Runt, Interval,
Timeout(Dropout),PatternandVideo
Teledyne Test Tools new T3DSO2000 Oscilloscopes feature two channel and four channel models with analog
bandwidth options from 100 MHz to 300 MHz. Each model offers amaximum sample rate of 2 GSa/s, and
amaximum memory depth of 140 Mpts in half channel mode. The four channel models incorporates two 2 GSa/s
ADCs and two 140 Mpts memory modules. When all channels are enabled, each channel has sample rate of
1 GSa/s and astandard record length of 70 Mpts. When only asingle channel per ADC is active, the maximum
sample rate is 2 GSa/s and the maximum record length is 140 Mpts. For ease-of-use, the most commonly used
functions can be accessed with its user-friendly front panel design.
bus types. The models also include History waveform
recording, and sequential triggering that enable extended
waveform recording and analysis. Other options available
includethe25MHzfunction/arbitrarywaveform
generatorandthe16channelMSOoption.Bothareeld
up gradable options. The new digital design also includes
ahardwareco-processorthatdeliversmeasurements
quickly and accurately without slowing acquisition and
front-panelresponse.Thefeaturesandperformanceof
Teledyne Test Tools new T3DSO2000 offers outstanding
value for money.
2
Serial bus triggering and decoding (Standard), supports
protocols IIC, SPI, UART, RS232, CAN, LIN
Videotrigger,supportsHDTV
Low background noise with voltage scales from
1mV/divto10V/div
10typesofone-buttonshortcuts,supportsAutoSetup,
Default, Cursors, Measure, Roll, History, Display/Persist,
Clear Sweep, Zoom and Print
Segmented acquisition (Sequence) mode, divides the
maximum record length into multiple segments (up to
80,000), according to trigger conditions set by the user,
withaverysmalldeadtimesegmenttocapturethe
qualifying event.
History waveform record (History) function,
maximum recorded waveform length is 80,000
frames.
Automatic measurement function for 37 parameters
as well as Measurement Statistics, Zoom, Gating,
Math, History and Reference functions
8 Math functions (FFT, addition, subtraction,
multiplication, division, integration, differential, square
root)
High Speed hardware based Pass/Fail function
MSO, 16 digital channels. Record Length up to
140 Mpts/Ch
25MHzfunction/arbitrarywaveformgenerator,
built-in10waveformtypes
Models and key Speci cation
Model T3DSO2102
T3DSO2104
T3DSO2202
T3DSO2204
T3DSO2302
T3DSO2304
Bandwidth 100 MHz 200 MHz 300 MHz
SamplingRate (Max.) Twochannelserieshaveasingle2GSa/sADC,fourchannelserieshavetwo
2GSa/sADCs.Whenallchannelsareenabled,eachchannelhasamaximumsample
rateof1GSa/s.Whenasinglechannelperpairisactive,thatchannelhassamplerate
of 2 GSa/s
Channels 4 + EXT (four channel series)
2 + EXT (two channel series)
Memory Depth (Max.) 70 Mpts/Ch (not interleave mode);
140 Mpts/Ch (interleave mode)
Waveform Capture Rate (Max.) 140,000wfm/s(normalmode),500,000wfm/s(sequencemode)
Trigger Type Edge,Slope,PulseWidth,Window,Runt,Interval,Dropout,Pattern,Video
Serial Trigger and decoder (Optional) IIC, SPI, UART/RS232, CAN, LIN
16 Digital Channels (MSO option) Maximumwaveformcapturerateupto500MSa/s,Recordlengthupto140Mpts/Ch
Waveform Generator (optional) Onechannel,25MHz,samplerateof125MHz,wavelengthof16kpts
I/O USB Host, USB Device, LAN, Pass/Fail, Trigger Out
Probe (Std) 1 for each Channel
Display 8inchTFT-LCD(800x480)
3
Large8inchTFT-LCDdisplaywith800x480resolution
Multiple interface types: USB Host, USB Device
(USB-TMC),LAN,TriggerOut
Supports SCPI remote control commands
SupportsMulti-languagedisplayandembeddedonline
help
4
FUNCTION & CHARACTERISTICS
8 inch TFT-LCD display and
10 one-button menus
8-inchTFT-LCDdisplaywith800x480resolution
Most commonly used functions are accessible using
10differentone-buttonoperationkeys:AutoSetup,
Default, Cursor, Measure, Roll, History, Persist, Clear
Sweep, Zoom, Print
1 HighResolution8-inchTFT-LCD
display for clear images.
2 HorizontalcontrolsofTimebase,
Zoom, Roll and trigger position.
3 AdvancedTriggeringcontrols
including Edge, Pulse, Interval,
Window, Slope, DropOut, Runt and
Pattern trigger types.
4 EasytouseAutoSetup,
Run / Stop and Default Controls.
1
2
3
4
5
6
7
8
9
5 Multi-functionalcontrolsforSerial
Decode, Math and Digital inputs.
6 Individualcolorcodedchannels
and display for ease of use.
7 Optional25MHzbuiltinarbitrary
waveform generator.
8 Probecompensationcalibrator.
9 Colorcodedinputchannels.
5
256-level Intensity Grading and
Color Temperature Display
The Color temperature display clearly shows noise and
jitter with infrequently occurring waveforms shown in
blue through to the most frequently occurring waveforms
shown in red.
256-levelintensitygradedwaveformdisplayisideal
for viewing modulated and changing waveforms.
Waveform Capture Rate
up to 500,000 wfm/s
Withawaveformcapturerateofupto500,000wfm/s
(sequence mode) and 140,000 wfm/s (standard mode)
the T3DSO2000 can easily capture glitches, infrequent
anomaliesandotherlow-probabilityevents.
Record Length of up to 140 Mpts
The record length of up to 140 Mpts allows use of
ahighersamplingratetocapturemoresignaldetail.
Thehardware-basedZoomthenallowsquickzoom
in to any area of interest.
A Wide Range Of Trigger Functions
A wide rage of powerful triggering functions including
Edge,Slope,Pulse,Video,Window,Runt,Interval,
Dropout, Pattern, etc, allows users to debug complex
hardware issues with ease.
History Mode
The always enabled History mode records up to
80,000 waveforms allowing users to scroll back through
previous acquisitions to observe past events and
locate anomalies quickly.
6
FUNCTION & CHARACTERISTICS
Eres Mode
Enhanced Resolution (Eres) mode reveals hidden
waveformdetailbyusingalinearaverageltertoreduce
waveform noise, even on single acquisition waveforms.
Sequence Mode
Segmented memory mode can store up to 80,000
waveforms into memory segments for capturing fast
pulses in quick succession. Combine Sequence Mode
with advanced triggers to isolate rare events. All the
segments can be play back using the History function.
Comprehensive Statistical Functions
Parametricstatisticaldatafor5parameterscanbe
displayed simultaneously. The statistical measurements
include:CurrentValue,MeanValue,MinimumValue,
MaximumValue,StandardDeviation,andthe
measurement count.
Advanced Math Function
The standard Math operations include Plus, Minus,
Multiply, Divide, FFT, integration, differential, and square
root for quick insight into waveform characteristics.
7
16 Digital Channels / MSO (Optional)
The MSO option adds 16 digital channels to the
T3DSO2000 analog channels enabling users to trigger
and acquire digital as well as analog waveforms in
a mixed signal debug environment.
Serial Bus Decoding Function (Optional)
Trigger and decode up to 2 common embedded and
automotive serial buses (I2C, SPI, UART/RS232, LIN and
CAN)simultaneouslywiththeT3DSO2000-TDoption.
Bus protocol information can be quickly and intuitively
displayed time aligned with the waveform and in table
format.
Built-in 25 MHz Function/Arbitrary Waveform
Generator (Optional)
Theoptionalbuilt-in25MHzfunctiongenerator
(T3DSO2000-FG)comprises10built-inwaveforms.
4 of your own arbitrary waveforms can be created
and downloaded via PC waveform editing software.
Complete Connectivity
Connectivity includes External Trigger Input, Pass/Fail
andTriggerOut,USBDevice(USBTMC)andLAN(VXI-11)
for remote control, and a Kensington Lock security point.
8
SPECIFICATIONS
Acquire System
Sampling Rate 2GSa/s(single-channel1) ),1GSa/s(dual-channel)
Memory Depth 140Mpts(single-channel),70Mpts(dual-channel)
Peak Detect 1 ns
Average Averages:4,16,32,64,128,256,512,1024
Eres Enhancebits:0.5,1,1.5,2.,2.5,3selectable
Interpolation Sinx/x, Linear
Input
Channels 2/4 + EXT
Coupling DC, AC, GND
Impedance DC:(1MΩ±2 %)||(22pF±3pF)
50Ω:50Ω±2 %
Max.Input voltage 1MΩ≤400Vpk(DC+PeakAC<=10kHz)
50Ω≤5Vrms
CH to CH Isolation DC~MaxBW>35dB
Probe Attenuation 0.1X,0.2X,0.5X,1X,2X,5X,10X,20X,50X,100X,200X,500X,1000X,2000X,5000X,10000X
Horizontal System
Time Scale 1.0ns/div~50s/div
Channel Skew <100ps
Waveform Capture Rate Upto140,000wfm/s(normalmode),500,000wfm/s(sequencemode)
Intensity grading 256-level
Display Format Y-T,X-Y,Roll
Time base Accuracy ±25ppm
Roll Mode 50ms/div~50s/div(1-2-5Step)
Vertical System
Bandwidth(-3dB) 300 MHz (SDS2304X / SDS2302X)
200 MHz (SDS2204X / SDS2202X)
100 MHz (SDS2104X / SDS2102X)
70 MHz (SDS2074X / SDS2072X)
VerticalResolution 8 bit
VerticalRange 8 divisions
VerticalScale(Probe1X) 1mV/div–10V/div(1-2-5step)
Offset Range (Probe 1X) 1mV/div~100mV/div:±1V
102mV/div~1V/div:±10V
1.02V/div~10V/div:±100V
Bandwidth Limit 20MHz±40 %
Bandwidth Flatness DC~10 %(BW):±1dB
10 %~50 %(BW):±2dB
50 %~100 %(BW):+2dB/–3dB
Low Frequency Response
(AC Coupling –3 dB)
≤10Hz(atinputBNC)
Noise stdev≤0.2div(<2mV/div)
stdev≤0.5div(≥2mV/div)
DC Gain Accuracy 5mV/div~10V/div:≤3.0 %
≤2mV/div:≤4.0 %
Offset Accuracy ≥2mV/div:±(1 %*offset+1.5 %*8*div+2mV)
<2mV/div:±(1 %*offset+1.5 %*8*div+1mV)
Rise Time1) (Typ.)<1.2ns(SDS2304X/SDS2302X)
(Typ.)<1.7ns(SDS2204X/SDS2202X)
(Typ.)<3.5ns(SDS2104X/SDS2102X)
(Typ.)<5.0ns(SDS2074X/SDS2072X)
Overshoot(500psRiseEdge) <10 %
All specications are not guaranteed unless the following conditions are met:
The oscilloscope calibration period is valid
Theoscilloscopehasbeenworkingcontinuouslyforatleast30minutesatthespeciedtemperature(18 ~ 28)
9
Trigger System
Mode Auto, Normal, Single
Level Internal:±4.5divfromthecenterofthescreen
EXT:±0.6V
EXT/5:±3V
Holdoff Range 100ns~1.5s
Coupling AC, DC, LFRJ, HFRJ, Noise RJ (CH1 ~ CH4)
Coupling Frequency Response
(CH1 ~ CH4)2)
DC: Passes all components of the signal
AC: Blocks DC components and attenuates signals below 8 Hz
LFRJ: Attenuates the frequency components below 900 kHz
HFRJ:Attenuatesthefrequencycomponentsabove500kHz
Coupling Frequency Response
(EXT)2)
DC: Passes all components of the signal
AC: Blocks DC components and attenuates signals below 8 Hz
LFRJ: Attenuates the frequency components below 400 kHz
HFRJ: Attenuates the frequency components above 1 MHz
Accuracy2) CH1~CH4:±0.2div
EXT:±0.3div
Sensitivity CH1 ~ CH4: 0.6 div
EXT:200mVpp(DC~10MHz)
300mVpp(10MHz~BW)
EXT/5:1Vpp(DC~10MHz)
1.5Vpp(10MHz~BW)
Jitter <100ps(CH1~CH4)
Displacement Pre-Trigger:0~100 %memory
Delay-Trigger:0~2,000div
Edge Trigger
Slope Rising, Falling, Rising & Falling
Source CH1~CH4/EXT/(EXT/5)/ACLine
Slope Trigger
Slope Rising, Falling
Limit Range <,>,<>,><
Source CH1 ~ CH4
Time Range 2 ns ~ 4.2 s
Resolution 1 ns
Pulse Width Trigger
Polarity +wid,-wid
Limit Range <,>,<>,><
Source CH1 ~ CH4
Pulse Width Range 2 ns ~ 4.2 s
Resolution 1 ns
Video Trigger
Signal Standard NTSC,PAL,720p/50,720p/60,1080p/50,1080p/60,1080i/50,1080i/60,Custom
Source CH1 ~ CH4
Sync Any, Select
Trigger condition Line, Field
Window Trigger
Window Type Absolute, Relative
Source CH1 ~ CH4
1)Single-channel:onechannelinCH1/CH2(orCH3/CH4)isONandanotherisOFF
Dual-channel:bothchannelsinCH1/CH2(orCH3/CH4)areON
2)TypicalValuereferstothetestedvalueunderspecicconditions.Itmightvarywiththeambienttemperatureorotherconditions
10
SPECIFICATIONS
Interval Trigger
Slope Rising, Falling
Limit Range <,>,<>,><
Source CH1 ~ CH4
Time Range 2 ns ~ 4.2 s
Resolution 1 ns
Dropout Trigger
Timeout Type Edge, State
Source CH1 ~ CH4
Slope Rising, Falling
Time Range 2 ns ~ 4.2 s
Resolution 1 ns
Runt Trigger
Polarity +wid,-wid
Limit Range <,>,<>,><
Source CH1 ~ CH4
Time Range 2 ns ~ 4.2 s
Resolution 1 ns
Pattern Trigger
Pattern Setting Invalid, Low, High
Logic AND, OR, NAND, NOR
Source CH1 ~ CH4
Limit Range <,>,<>,><
Time Range 2 ns ~ 4.2 s
Resolution 1 ns
Serial Trigger
IIC Trigger
Condition Start, Stop, Restart, No Ack, EEPROM, Address&Data, Data Length
Source (SDA/SCL) CH1 ~ CH4
Data format Hex
Limit Range EEPROM:=,>,<
Data Length EEPROM: 1 byte
Address & Data: 1 ~ 2 byte
Data Length: 1 ~ 12 byte
R/W bit Address & Data: Read, Write, Do not care
SPI Trigger
Condition Data
Source (CS/CL/Data) CH1 ~ CH4
Data format Binary
Data Length 4 ~ 96 bit
BitValue 0, 1, X
Bit Order LSB, MSB
11
UART / RS232 Trigger
Condition Start, Stop, Data, Parity Error
Source (RX/TX) CH1 ~ CH4
Data format Hex
Limit Range =,>,<
Data Length 1 byte
Data Width 5bit,6bit,7bit,8bit
Parity Check None, Odd, Even
Stop Bit 1bit,1.5bit,2bit
Idle Level High, Low
Baud Rate (Selectable) 600/1200/2400/4800/9600/19200/38400/57600/115200bit/s
Baud Rate (Custom) 300 bit/s ~ 334000 bit/s
CAN Trigger
Type All, Remote, ID, ID + Data, Error
Source CH1 ~ CH4
ID STD (11 bit), EXT (29 bit)
Data format Hex
Data Length 1~2 byte
Baud Rate (Selectable) 5k/10k/20k/50k/100k/125k/250k/500k/800k/1Mbit/s
Baud Rate (Custom) 5kbit/s~1Mbit/s
LIN Trigger
Type Break, Frame ID, ID+Data, Error
Source CH1 ~ CH4
ID 1 byte
Data format Hex
Data Length 1 ~ 2 byte
Baud Rate (Selectable) 600/1200/2400/4800/9600/19200 bit/s
Baud Rate (Custom) 300 bit/s ~ 20 kbit/s
Serial Decoder (Optional)
No. of Decoder 2
IIC Decoder
Signal SCL, SDA
Address 7 bit, 10 bit
Threshold -4.5~4.5div
List 1 ~ 7 lines
SPI Decoder
Signal CLK, MISO, MOSI, CS
Edge Select Rising, Falling
Idle Level Low, High
Bit Order MSB, LSB
Threshold -4.5~4.5div
List 1 ~ 7 lines
UART / RS232 Decoder
Signal RX, TX
Data Width 5bit,6bit,7bit,8bit
Parity Check None, Odd, Even
Stop Bit 1bit,1.5bit,2bit
Idle Level Low, High
Threshold -4.5~4.5div
List 1 ~ 7 lines
CAN Decoder
Signal CAN_H, CAN_L
Source CAN_H,CAN_L,CAN_H-CAN_L
Threshold -4.5~4.5div
List 1 ~ 7 lines
LIN Decoder
LINSpecicationPackageRevision Ver1.3,Ver2.0
Threshold -4.5~4.5div
List 1 ~ 7 lines
12
Measurement
Source CH1 ~ CH4, Math, Ref, History
No. of Measurements Display5measurementsatthesametime
Range Screen, Gating
Measurement Parameters (37 Types)
Vertical (Voltage) Vmax Highestvalueininputwaveform
Vmin Lowestvalueininputwaveform
Vpp Differencebetweenmaximumandminimumdatavalues
Vamp Differencebetweentopandbaseinabimodalsignal,orbetweenmax
and min in an unimodal signal
Vtop Valueofmostprobablehigherstateinabimodalwaveform
Vbase Valueofmostprobablelowerstateinabimodalwaveform
Mean Average of all data values
Vmean Averageofdatavaluesintherstcycle
stdev Standard deviation of all data values
Vstd Standarddeviationofalldatavaluesintherstcycle
Vrms Rootmeansquareofalldatavalues
Crms Rootmeansquareofalldatavaluesintherstcycle
FOV Overshootafterafallingedge;(base-min)/Amplitude
FPRE Overshootbeforeafallingedge;(max-top)/Amplitude
ROV Overshootafterarisingedge;(max-top)/Amplitude
RPRE Overshootbeforearisingedge;(base-min)/Amplitude
Level@X The voltage value of the trigger point
Horizontal (Time) Period Periodforeverycycleinwaveformatthe50 %level,andpositiveslope
Freq Frequencyforeverycycleinwaveformatthe50 %level,andpositiveslope
+Wid Widthmeasuredat50 %levelandpositiveslope
-Wid Widthmeasuredat50 %levelandnegativeslope
Rise TimeDurationofrisingedgefrom10 – 90 %
Fall TimeDurationoffallingedgefrom90 – 10 %
Bwid Timefromtherstrisingedgetothelastfallingedge,ortherstfallingedge
tothelastrisingedgeatthe50 %crossing
+Dut Ratio of positive width to period
-Dut Ratioofnegativewidthtoperiod
Delay Timefromthetriggertothersttransitionatthe50 %crossing
Time@Level Timefromtriggerofeachtransitionataspeciclevelandslope
Delay Phase Calculate the phase difference between two edges
FRR Timebetweentherstrisingedgesofthetwochannels
FRF TimefromtherstrisingedgeofchannelA,totherstfallingedgeofchannelB
FFR TimefromtherstfallingedgeofchannelA,totherstrisingedgeofchannelB
FFF TimefromtherstfallingedgeofchannelA,totherstfallingedgeofchannelB
LRR TimefromtherstrisingedgeofchannelA,tothelastrisingedgeofchannelB
LRF TimefromtherstrisingedgeofchannelA,tothelastfallingedgeofchannelB
LFR TimefromtherstfallingedgeofchannelA,tothelastrisingedgeofchannelB
LFF TimefromtherstfallingedgeofchannelA,tothelastfallingedgeofchannelB
Cursors Manual:TimeX1,X2,(X1-X2),(1/ΔT)
VoltageY1,Y2,(Y1-Y2)
Track:TimeX1,X2,(X1-X2)
Statistics Current, Mean, Min,
Counter ±1Hzcountererror
SPECIFICATIONS
13
Math
Operation +,-,*,/,FFT,d/dt,∫dt,squareroot
FFT window Rectangular, Blackman, Hanning, Hamming
FFT display Full Screen, Split
Built-in Function/Arbitrary Waveform Generator (Optional)
Channel 1
Max. Output Frequency 25MHz
Sampling Rate 125MSa/s
Frequency Resolution 1μHz
Frequency Accuracy ±50ppm
VerticalResolution 14 bits
Amplitude Range 2mVpp~3Vpp(into50Ω)
4mVpp~6Vpp(intoHiZ)
Waveforms Sine, Square, Ramp, Pulse, DC, Noise, Cardiac, Gaus Pulse, Exp Rise, Exp Fall, Arb
Output Impedance 50Ω±2 %
Protection Short-CircuitProtection
Sine
Frequency 1μHz~25MHz
Offset Accuracy (100 kHz) ±(0.3dB*offsetsettingvalue+1mVpp)
Amplitude Flatness
(Compareto100kHz,5Vpp)
±0.3dB
SFDR DC~1MHz-60dBc
1MHz~5MHz-55dBc
5MHz~25MHz-50dBc
HD DC~5MHz-50dBc
5MHz~25MHz-45dBc
Square/Pulse
Frequency 1μHz~10MHz
Duty Cycle 20 %~80 %
Rise/Fall time <24ns(10 %~90 %)
Overshoot <3 %(typical,1KHz,1Vpp)
Pulse Width >50ns
Jitter <500ps+10ppm
Ramp
Frequency 1μHz~300kHz
Linearity (Typical) <0.1 %ofPk-Pk(Typical,1kHz,1Vpp,100 %Symmetry)
Symmetry 0 %~100 %
DC
Offset range ±1.5V(into50Ω)
±3V(intoHiZ)
Accuracy ±(|offset|*1 %+3mV)
Noise
Bandwidth >25MHz(-3dB)
Arb
Frequency 1μHz~5MHz
Wave Length 16 Kpts
Sampling Rate 125MSa/s
Waveform Import EasyWave,U-Disk
14
Digital Channels
No. of Channels 16
Max. Sampling Rate 500MSa/s
Memory Depth 14 Mpts/Ch
Min. Detectable Pulse Width 4 ns
Level Group D0~D7,D8~D15
Level Range -3V~3V
Logic Type TTL,CMOS,LVCMOS3.3,LVCMOS2.5,custom
Skew2) D0~D15:±1samplinginterval
DigitaltoAnalog:±(1samplinginterval+1ns)
I/O
Standard USB Host, USB Device, LAN, Pass/Fail, Trigger Out
Pass/Fail 3.3VTTLOutput
Display
Display Type 8-inchTFTLCD
Resolution 800 × 480
Color 24 bit
Contrast 500:1
Backlight 300 nit
Range 8 x 14 divisions
Waveform Display
Type Dot,Vector
Persistence Time OFF,1s,5s,10s,30s,innite
Color Display Normal, Color
Screen Saver 1min,5min,10min,30min,1hour,OFF
Language
Language SimpliedChinese,TraditionalChinese,English,French,Japanese,Korean,
German, Russian, Italian, Portuguese
Environments
Temperature Operating: 10 ~ 40
Non-operating:-20~60
Humidity Operating:85 %RH,40DegC,24hours
Non-operating:85 %RH,65DegC,24hours
Altitude Operating:≤3000m
Non-operating:≤15,266m
Electromagnetic Compatibility 2004/108/EC
ExecutionStandardEN61326-1:2006
EN61000-3-2:2006+A2:2009,EN61000-3-3:2008
Safety 2006/95/EC
ExecutionStandardEN61010-1:2010/EN61010-2-030:2010
Power Supply
InputVoltage&Frequency 100~240Vrms50/60Hz
100~120Vrms400Hz
Power 25WMax
Mechanical
Dimensions Length*Width*Height=352mm*128mm*224mm
Weight N.W3.4Kg(2-ch);3.6Kg(4-ch)
G.W4.9Kg(2-ch);5.2Kg(4-ch)
SPECIFICATIONS
2)TypicalValuereferstothetestedvalueunderspecicconditions.Itmightvarywiththeambienttemperatureorotherconditions
15
T3DSO2000 Probes
Probe type Model Picture Description
Passive T3PP300 300 MHz bandwidth, 1 Mohm 10X Probe 1 supplied per channel.
Logic Probe T3DSO2000-LS 16 Channel Logic Probe. This probe REQUIRES that the Oscilloscope
hasoptionT3DSO2000-MSO
MSO Software T3DSO2000-
MSO1)
SoftwareLicensefortheMSOcapability.EnablesoneT3DSO2000-LS
16 channel logic probe lead set to be shared amongst several licensed
T3DSO2000 oscilloscopes. This software option does not come with
alogicprobeleadset.
Current T3CP50 Bandwidth:50MHz,Max.continuouscurrent:30Arms,
Peakcurrent:50A
SwitchRatio:100mV/A,1V/A,Accuracy:1V/A(±1 %±1mA),
100mV/A(±1 %±10mA),DC12V/1.2Apoweradapter
High Voltage
Differential
T3DP7000 Bandwidth: 100 MHz
DifferentialRange:7000V(DC+PeakAC),
100X/1000X
Accuracy:±2 %
DC5V/1AUSBadapter
High Voltage T3VP100 Bandwidth: 40 MHz
DifferentialRange:DC10KV,AC(rms):7KV(sine),
AC(Vpp):20KV(Pulse)
1000X
Accuracy:≤3 %
1)ThisprobeREQUIRESthatthescopehasoptionT3DSO2000-MSO.
Ordering information
Description 300 MHz, 4 Ch, 2 GSa/s (Max.), 140 Mpts T3DSO2304
300 MHz, 2 Ch, 2 GSa/s (Max.), 140 Mpts T3DSO2302
200 MHz, 4 Ch, 2 GSa/s (Max.), 140 Mpts T3DSO2204
200 MHz, 2 Ch, 2 GSa/s (Max.), 140 Mpts T3DSO2202
100 MHz, 4 Ch, 2 GSa/s (Max.), 140 Mpts T3DSO2104
100 MHz, 2 Ch, 2 GSa/s (Max.), 140 Mpts T3DSO2102
Standard Accessories USBCable-1
PassiveProbe-2(2-chmodel);-4(4-chmodel)
PowerCord-1
QuickStart-1
CerticateofCalibration-1
Optional Accessories T3DSO2000-TD IIC,SPI,UART/RS232,CAN,LINDecoder
T3DSO2000-FG 25MHzFunction/ArbitraryWaveformGenerator
T3DSO2000-MSO 16DigitalChannels（Software,requiresT3DSO2000-LS
T3DSO2000-LS 16ChannelLogicProbe,requiresT3DSO2000-MSO
T3VP100 HighVoltageProbe
T3CP50 CurrentProbe
T3DP7000 HighVoltageDifferentialProbe
© 2018 Teledyne Test Tools is a brand and trademark of Teledyne LeCroy Inc. All rights reserved. Specications, prices, availability and delivery subject to change without notice.
Product brand or brand names are trademarks or requested trademarks of their respective holders.
T3 stands for Teledyne Test Tools.
teledynelecroy.com
Company Prole
Teledyne LeCroy is aleading provider of oscilloscopes, protocol
analyzers and related test and measurement solutions that
enable companies across awide range of industries to design
and test electronic devices of all types. Since our founding
in 1964, we have focused on creating products that improve
productivity by helping engineers resolve design issues
faster and more effectively. Oscilloscopes are tools used by
designers and engineers to measure and analyze complex
electronic signals in order to develop high-performance
systems and to validate electronic designs in order to improve
time to market.
The Teledyne Test Tools brand extends the Teledyne LeCroy
product portfolio with a comprehensive range of test
equipment solutions. This new range of products delivers
a broad range of quality test solutions that enable engineers
to rapidly validate product and design and reduce time-to-
market. Designers, engineers and educators rely on Teledyne
Test Tools solutions to meet their most challenging needs for
testing, education and electronics validation.
Location and Facilities
Headquartered in Chestnut Ridge, New York, Teledyne
Test Tools and Teledyne LeCroy has sales, service and
development subsidiaries in the US and throughout
Europe and Asia. Teledyne Test Tools and Teledyne LeCroy
products are employed across awide variety of industries,
including semiconductor, computer, consumer electronics,
education, military/aerospace, automotive/industrial, and
telecommunications.
Teledyne LeCroy
(US Headquarters)
700 Chestnut Ridge Road
Chestnut Ridge, NY. USA 10977-6499
Phone: 800-553-2769 or 845-425-2000
Fax Sales: 845-578-5985
Phone Support: 1-800-553-2769
Email Sales: contact.corp@teledynelecroy.com
Email Support: support@teledynelecroy.com
Web Site: http://teledynelecroy.com/
Teledyne LeCroy
(European Headquarters)
Teledyne LeCroy GmbH
Im Breitspiel 11c
D-69126 Heidelberg, Germany
Phone: +49 6221 82700
Fax: +49 6221 834655
Phone Service: +49 6221 8270 85
Phone Support: +49 6221 8270 28
Email Sales: contact.gmbh@teledynelecroy.com
Email Service: service.gmbh@teledynelecroy.com
Email Support: tlc.t3.appsupport.eu@teledyne.com
Web Site: http://teledynelecroy.com/germany
ABOUT TELEDYNE TEST TOOLS
Distributed by: