HM-6617/883 2K x 8 CMOS PROM January 2001 Features Description * This Circuit is Processed in Accordance to MIL-STD883 and is Fully Conformant Under the Provisions of Paragraph 1.2.1. The HM-6617/883 is a 16,384-bit fuse link CMOS PROM in a 2K word by 8-bit/word format with "Three-State" outputs. This PROM is available in the standard 0.600 inch wide 24 pin SBDIP, the 0.300 inch wide slim SBDIP, and the JEDEC standard 32 pad CLCC. * Low Power Standby and Operating Power - ICCSB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100A - ICCOP . . . . . . . . . . . . . . . . . . . . . . . . . . 20mA at 1MHz The HM-6617/883 utilizes a synchronous design technique. This includes on-chip address latches and a separate output enable control which makes this device ideal for applications utilizing recent generation microprocessors. This design technique, combined with the Intersil advanced self-aligned silicon gate CMOS process technology offers ultra-low standby current. Low ICCSB is ideal for battery applications or other systems with low power requirements. * Fast Access Time. . . . . . . . . . . . . . . . . . . . . . . 90/120ns * Industry Standard Pinout * Single 5.0V Supply * CMOS/TTL Compatible Inputs * High Output Drive . . . . . . . . . . . . . . . . 12 LSTTL Loads The Intersil NiCr fuse link technology is utilized on this and other Intersil CMOS PROMs. This gives the user a PROM with permanent, stable storage characteristics over the full industrial and military temperature voltage ranges. NiCr fuse technology combined with the low power characteristics of CMOS provides an excellent alternative to standard bipolar PROMs or NMOS EPROMs. * Synchronous Operation * On-Chip Address Latches * Separate Output Enable * Operating Temperature Range . . . . . . -55oC to +125oC All bits are manufactured storing a logical "0" and can be selectively programmed for a logical "1" at any bit location. Ordering Information PACKAGE TEMPERATURE RANGE 90ns -55oC to +125oC -55oC to +125oC -55oC to +125oC SBDIP SLIM SBDIP CLCC 120ns PACKAGE NO. HM1-6617B/883 HM1-6617/883 D24.6 HM6-6617B/883 HM6-6617/883 D24.3 HM4-6617B/883 HM4-6617/883 J32.A Pinouts 3 2 1 32 31 30 PIN DESCRIPTION NC 4 NC NC VCC A6 NC 1 NC A7 HM-6617/883 (CLCC) TOP VIEW A7 HM-6617/883 (SBDIP) TOP VIEW PIN 2 24 VCC 23 A8 A6 5 29 A8 A5 3 22 A9 A5 6 A4 4 21 P A3 5 20 G A2 6 19 A10 A1 7 18 E A0 8 17 Q7 Q0 9 DESCRIPTION NC No Connect 28 A9 A0-A10 Address Inputs A4 7 27 NC E Chip Enable A3 8 26 P Q Data Output A2 9 25 G 24 A10 VCC Power (+5V) A1 10 A0 11 23 E G Output Enable 16 Q6 Q1 10 15 Q5 NC 12 22 Q7 P (Note) Program Enable Q2 11 14 Q4 Q0 13 GND 12 13 Q3 21 Q6 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 321-724-7143 | Copyright (c) Intersil Corporation 2001 1 NOTE: P should be hardwired to VCC except during programming. Q5 Q4 Q3 NC GND Q2 Q1 14 15 16 17 18 19 20 File Number 3016.2 HM-6617/883 Functional Diagram MSB A10 A9 A8 A7 A6 A5 A4 A LATCHED ADDRESS REGISTER 7 GATED ROW DECODER Q0 128 x 128 MATRIX 128 A Q1 7 LSB Q2 L G Q3 16 16 16 16 16 16 16 16 GATED COLUMN DECODER AND DATA OUTPUT CONTROL G E 8 Q5 A A Q4 4 4 Q6 G L ALL LINES POSITIVE LOGIC: LATCHED ADDRESS REGISTER ACTIVE HIGH THREE-STATE BUFFERS: A HIGH OUTPUT ACTIVE ADDRESS LATCHES AND GATED DECODERS: Q7 MSB LSB A3 LATCH ON FALLING EDGE OF E GATE ON FALLING EDGE OF G 2 A2 A1 A0 HM-6617/883 Absolute Maximum Ratings Thermal Information Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +7.0V Input, Output or I/O Voltage . . . . . . . . . . . GND -0.3V to VCC +0.3V Typical Derating Factor . . . . . . . . . . . . 5mA/MHz Increase in ICCOP ESD Classification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class 1 Thermal Resistance JA JC SBDIP Package . . . . . . . . . . . . . . . . . . 48oC/W 9oC/W Slim SBDIP . . . . . . . . . . . . . . . . . . . . . 65oC/W 14oC/W CLCC Package . . . . . . . . . . . . . . . . . . 58oC/W 19oC/W Maximum Storage Temperature Range . . . . . . . . .-65oC to +150oC Maximum Junction Temperature . . . . . . . . . . . . . . . . . . . . . . +175oC Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . +300oC Operating Conditions Operating Voltage Range . . . . . . . . . . . . . . . . . . . . . +4.5V to +5.5V Operating Temperature Range . . . . . . . . . . . . . . . . -55oC to +125oC Input Low Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to +0.8V Input High Voltage . . . . . . . . . . . . . . . . . . . . . . +2.4V to VCC +0.3V Die Characteristics Gate Count . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5473 Gates CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. TABLE 1. HM-6617/883 DC ELECTRICAL PERFORMANCE SPECIFICATIONS Device Guaranteed and 100% Tested LIMITS PARAMETER SYMBOL (NOTES 1, 4) CONDITIONS High Level Output Voltage VOH1 VCC = 4.5V, IO = -2.0mA 1, 2, 3 -55oC TA +125oC 2.4 - V Low Level Output Voltage VOL VCC = 4.5V, IO = +4.8mA 1, 2, 3 -55oC TA +125oC - 0.4 V High Impedance Output Leakage Current IIOZ VCC = 5.5V, G = 5.5V, VI/O = GND or VCC 1, 2, 3 -55oC TA +125oC -1.0 1.0 A VCC = 5.5V, VI = GND or VCC, P Not Tested 1, 2, 3 -55oC TA +125oC -1.0 1.0 A Input Leakage Current II GROUP A SUBGROUPS TEMPERATURE MIN MAX UNITS Standby Supply Current ICCSB VI = VCC or GND, VCC = 5.5V, IO = 0mA 1, 2, 3 -55oC TA +125oC - 100 A Operating Supply Current ICCOP VCC = 5.5V, G = GND, (Note 3), f = 1MHz, IO = 0mA, VI = VCC or GND 1, 2, 3 -55oC TA +125oC - 20 mA 7, 8A, 8B -55oC TA +125oC - - Functional Test FT VCC = 4.5V (Note 6) TABLE 2. HM-6617/883 AC ELECTRICAL PERFORMANCE SPECIFICATIONS Device Guaranteed and 100% Tested LIMITS LIMITS HM-6617B/883 HM-6617/883 PARAMETER SYMBOL (NOTES 1, 2, 4) CONDITIONS GROUP A SUBGROUPS TEMPERATURE MIN MAX MIN MAX UNITS Address Access Time TAVQV VCC = 4.5V and 5.5V (Note 5) 9, 10, 11 -55oC TA +125oC - 105 - 140 ns Output Enable Access Time TGLQV VCC = 4.5V and 5.5V 9, 10, 11 -55oC TA +125oC - 40 - 50 ns Chip Enable Access Time TELQV VCC = 4.5V and 5.5V 9, 10, 11 -55oC TA +125oC - 90 - 120 ns Address Setup Time TAVEL VCC = 4.5V and 5.5V 9, 10, 11 -55oC TA +125oC 15 - 20 - ns Address Hold Time TELAX VCC = 4.5V and 5.5V 9, 10, 11 -55oC TA +125oC 20 - 25 - ns Chip Enable Low Width TELEH VCC = 4.5V and 5.5V 9, 10, 11 -55oC TA +125oC 95 - 120 - ns Chip Enable High Width TEHEL VCC = 4.5V and 5.5V 9, 10, 11 -55oC TA +125oC 40 - 40 - ns 3 HM-6617/883 TABLE 2. HM-6617/883 AC ELECTRICAL PERFORMANCE SPECIFICATIONS (Continued) Device Guaranteed and 100% Tested LIMITS LIMITS HM-6617B/883 HM-6617/883 PARAMETER Read Cycle Time SYMBOL TELEL (NOTES 1, 2, 4) CONDITIONS GROUP A SUBGROUPS TEMPERATURE MIN MAX MIN MAX UNITS 9, 10, 11 -55oC TA +125oC 136 - 160 - ns VCC = 4.5V and 5.5V NOTES: 1. All voltages referenced to Device GND. 2. AC measurements assume transition time 5ns; input levels = 0.0V to 3.0V; timing reference levels = 1.5V; output load = 1TTL equivalent load and CL 50pF. 3. Typical derating = 5mA/MHz increase in ICCOP. 4. All tests performed with P hardwired to VCC. 5. TAVQV = TELQV + TAVEL. 6. Tested as follows: f = 1MHz, VIH = 2.4V, VIL = 0.8V, IOH = -1mA, IOL = +1mA, VOH 1.5V, VOL 1.5V. TABLE 3. HM-6617/883 AC AND DC ELECTRICAL PERFORMANCE SPECIFICATIONS LIMITS HM-6617B/883 PARAMETER Input Capacitance I/O Capacitance SYMBOL CIN CI/O (NOTES 1, 2) CONDITIONS LIMITS HM-6617/883 NOTES TEMPERATURE MIN MAX MIN MAX UNITS VCC = Open, f = 1MHz, All Measurements Referenced to Device GND 2, 3 +25oC - 10 - 10 pF VCC = Open, f = 1MHz, All Measurements Referenced to Device GND 2, 4 +25oC - 12 - 12 pF 2, 5 +25oC - 10 - 10 pF VCC = Open, f = 1MHz, All Measurements Referenced to Device GND 2, 3 +25oC - 12 - 12 pF VCC = Open, f = 1MHz, All Measurements Referenced to Device GND 2, 4 +25oC - 14 - 14 pF 2, 5 +25oC - 12 - 12 pF Chip Enable Time TELQX VCC = 4.5V and 5.5V 2 -55oC TA +125oC 5 - 5 - ns Output Enable Time TGLQX VCC = 4.5V and 5.5V 2 -55oC TA +125oC 5 - 5 - ns Chip Disable Time TEHQZ VCC = 4.5V and 5.5V 2 -55oC TA +125oC - 45 - 50 ns Output Disable Time TGHQZ VCC = 4.5V and 5.5V 2 -55oC TA +125oC - 40 - 50 ns Output High Voltage VOH2 VCC = 4.5V, IO = 100A 2 -55oC TA +125oC VCC1V - VCC1V - V NOTES: 1. All tests performed with P hardwired to VCC. 2. The parameters listed in Table 3 are controlled via design or process parameters and are not directly tested. These parameters are characterized upon initial design changes which would affect these characteristics. 3. Applies to 0.600 inch SBDIP device types only. 4. Applies to 0.300 inch SBDIP device types only. 5. Applies to Ceramic Leadless Chip Carrier (CLCC) device types only. 4 HM-6617/883 TABLE 4. APPLICABLE SUBGROUPS CONFORMANCE GROUPS METHOD SUBGROUPS Initial Test 100%/5004 - Interim Test 100%/5004 1, 7, 9 PDA 100%/5004 1 Final Test 100%/5004 2, 3, 8A, 8B, 10, 11 Group A Samples/5005 1, 2, 3, 7, 8A, 8B, 9, 10, 11 Groups C & D Samples/5005 1, 7, 9 Switching Waveforms TAVQV ADDRESSES VALID ADDRESS 1.5V VALID ADDRESSES 1.5V 0V TELEL TAVEL 3.0V TELAX TELEH E 1.5V 3.0V 1.5V 1.5V 1.5V 0V TEHEL TEHQZ TELQV TGLQV G 3.0V 1.5V 1.5V 0V TGLQX TGHQZ DATA OUTPUT Q0-Q7 TELQX VALID DATA TS FIGURE 1. READ CYCLE Test Circuit DUT CL (NOTE) IOH NOTE: TEST HEAD CAPACITANCE 1.5V EQUIVALENT CIRCUIT FIGURE 2. TEST CIRCUIT 5 IOL HM-6617/883 Burn-In Circuits HM-6617/883 (.300 INCH) SBDIP HM-6617/883 (.600 INCH) SBDIP VCC VCC C C f8 1 A7 VCC 24 f7 2 A6 A8 23 f6 3 A5 A9 22 f5 4 A4 f4 f8 1 A7 VCC 24 f9 f7 2 A6 A6 23 f11 f10 f6 3 A5 A5 22 f12 P 21 VCC f5 4 A4 P 21 VCC 5 A3 G 20 f12 f4 5 A3 G 20 f1 f3 6 A2 A10 19 f11 f3 6 A2 A10 19 f2 7 A1 E 18 f0 f2 7 A1 E 18 f1 8 A0 Q7 17 f1 8 A0 Q7 17 9 Q0 Q6 16 9 10 Q1 Q5 15 2.4K 2.4K VCC/2 2.4K 11 Q2 Q4 14 12 GND Q3 13 2.4K 2.4K 2.4K VCC/2 VCC/2 2.4K 2.4K GND Q0 Q6 16 10 Q1 Q5 15 11 Q2 Q4 14 12 GND Q3 13 GND HM-6617/883 CLCC VCC f10 C 4 NC NC NC NC NC 3 2 1 32 31 30 f9 5 29 f11 f8 6 28 f12 f7 7 27 NC f6 8 26 f5 9 25 f1 f4 10 24 f13 f3 11 23 f0 NC 12 22 13 21 VCC/2 14 15 16 17 18 19 20 NC VCC/2 VCC/2 NOTES: f0 = 100KHz 10%. All resistors = 47k Unless Otherwise Noted. VCC = 5.5V 0.05V. C = 0.01 F min. 6 VCC VCC/2 f13 f0 VCC/2 HM-6617/883 Die Characteristics DIE DIMENSIONS: 140 x 232 x 19 1mils GLASSIVATION: Type: SiO2 Thickness: 7kA 9kA METALLIZATION: Type: Si - Al Thickness: 11kA 15kA WORST CASE CURRENT DENSITY: 1.7 x 105 A/cm2 Metallization Mask Layout HM-6617/883 A4 A5 A6 A7 VCC A8 A9 P A3 G A2 A10 A1 E A0 Q7 Q0 Q1 Q2 GND Q3 Q4 Q5 Q6 All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification. Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see web site http://www.intersil.com 7