If you want to save power, the LED can be disconnected from the output pin (cut the trace
between the jumper marked as such). We designed this breakout to have the more-responsive
"fast mode" which draws about 0.5mA. If you need ultra-low (~50uA) power usage, the mode
jumper can be cut on one side & soldered closed on the other to fix it into that mode. Check the
datasheet for specific power usage measurements.
Comes with a fully assembled board, and a small stick of 0.1" header so you can solder and
plug it into a breadboard. For additional contacts, we suggest using copper foil, then solder a
wire that connects from the foil pad to the breakout.
The datasheet has many details on sensitivity, power usage, etc.
Standalone Momentary Capacitive Touch Sensor Breakout (11:10)
TECHNICAL DETAILS
LEARN
Dimensions: 20mm / 0.8" x 28mm / 1.1"
Weight: 1.87g
Datasheets, EagleCAD PCB files, Fritzing object and more available in the product tutorial!