ELG-75-C 60~75W Constant Current Mode LED Driver series IS 15885(Part 2/Sec13) 110 M M (for DA-Type only) IP65 IP67 THOMAS SAMUEL THOMAS SAMUEL Type HL Features Constant Current mode output Metal housing design with functional Ground Built-in active PFC function No load / Standby power consumption <0.5W IP67 / IP65 rating for indoor or outdoor installations Function options: output adjustable via potentiometer; 3 in 1 dimming (dim-to-off); Smart timer dimming; DAL I 8 R-41027766 (for 700A/1050A only) Applications LED street lighting LED harbor lighting LED bay lighting LED greenhouse lighting LED flood lighting Type HL for use in Class I, Division 2 hazardous (Classified) location. Typical lifetime>50000 hours 5 years warranty Description ELG-75-C series is a 75W LED AC/DC driver featuring the constant current mode and high voltage output. ELG-75-C operates from 100~305VAC and offers models with different rated current ranging between 350mA and 1400mA. Thanks to the high efficiency up to 91%, with the fanless design, the entire series is able to operate for -40~+85 case temperature under free air convection. The design of metal housing and IP67/IP65 ingress protection level allows this series to fit both indoor and outdoor applications. ELG-75-C is equipped with various function options, such as dimming methodologies, so as to provide the optimal design flexibility for LED lighting system. Model Encoding ELG - 75 - C500 A - Type Blank A B IP Level IP67 IP65 IP67 AB IP65 DA Dx D2 IP67 IP67 IP67 { Blank:2-wire input for standard model Input wiring type 3Y:3-wire input for standard model Function options Rated output current (350/500/700/1050/1400mA) Output wattage Series name Function Io fixed. Io adjustable through built-in potentiometer. 3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistance) Io adjustable through built-in potentiometer & 3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistance) DALI control technology. Built-in Smart timer dimming function by user request. Built-in Smart timer dimming and programmable function. Note In Stock In Stock In Stock In Stock In Stock By request In Stock File Name:ELG-75-C-SPEC 2018-09-30 60~75W Constant Current Mode LED Driver ELG-75-C series SPECIFICATION MODEL RATED CURRENT RATED POWER OUTPUT Note.5 ELG-75-C500 ELG-75-C700 ELG-75-C1050 ELG-75-C1400 350mA 200VAC ~ 305VAC 74.9W 100VAC ~ 180VAC 500mA 700mA 1050mA 1400mA 75W 74.9W 74.55W 75.6W 59.85W 60W 59.5W 59.85W 60.2W 35 ~ 71V 78V 27 ~ 54V 61V 525 ~ 1050mA 700 ~ 1400mA 90% 90% 53 ~ 107V 75 ~ 150V CONSTANT CURRENT REGION Note.2 107 ~ 214V 114V 158V OPEN CIRCUIT VOLTAGE(max.) 224V Adjustable for A/AB-Type only (via built-in potentiometer) CURRENT ADJ. RANGE 350 ~ 700mA 250 ~ 500mA 175 ~ 350mA CURRENT RIPPLE 5.0% max. @rated current CURRENT TOLERANCE SET UP TIME Note.4 VOLTAGE RANGE INPUT ELG-75-C350 Note.3 5.0% 500ms/115VAC,230VAC 100 ~ 305VAC 142 ~ 431VDC (Please refer to "STATIC CHARACTERISTIC" section) FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF0.97/115VAC, PF0.95/230VAC, PF0.92/277VAC@full load (Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section) THD< 20%(@load50%/115VC,230VAC; @load75%/277VAC) TOTAL HARMONIC DISTORTION (Please refer to "TOTAL HARMONIC DISTORTION(THD)" section) 91% EFFICIENCY (Typ.) 91% AC CURRENT (Typ.) 0.7A / 115VAC INRUSH CURRENT(Typ.) COLD START 50A(twidth=350s measured at 50% Ipeak)/230VAC; Per NEMA 410 0.45A / 230VAC 90% 0.38A/277VAC MAX. No. of PSUs on 16A 5 units (circuit breaker of type B) / 8 units (circuit breaker of type C) at 230VAC CIRCUIT BREAKER LEAKAGE CURRENT <0.75mA / 277VAC NO LOAD / STANDBY POWER CONSUMPTION No load power consumption <0.5W for Blank / A / Dx / D2-Type Standby power consumption <0.5W for B / AB / DA -Type SHORT CIRCUIT Hiccup mode, recovers automatically after fault condition is removed PROTECTION OVER VOLTAGE OVER TEMPERATURE WORKING TEMP. 160 ~ 190V 225 ~ 260V 115 ~ 140V Shut down o/p voltage, re-power on to recover 80 ~ 100V 64 ~ 79V Shut down o/p voltage, re-power on to recover Tcase=-40 ~ +85 (Please refer to " OUTPUT LOAD vs TEMPERATURE" section) Tcase=+85 MAX. CASE TEMP. 20 ~ 95% RH non-condensing WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY -40 ~ +80, 10 ~ 95% RH TEMP. COEFFICIENT 0.03%/ (0 ~ 60) VIBRATION 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes SAFETY STANDARDS DALI STANDARDS UL8750(type"HL"), CSA C22.2 No. 250.13-12;EN/AS/NZS 61347-1, EN/AS/NZS 61347-2-13 independent, EN62384; EAC TP TC 004;BIS IS15885(for 700A/1050A only);IP65 or IP67; GB19510.1, GB19510.14; KC61347-1,KC61347-2-13 approved Compliance to IEC62386-101, 102, 207 for DA-Type only I/P-O/P:3.75KVAC I/P-FG:2.0KVAC O/P-FG:1.5KVAC SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH EMC Compliance to EN55015,EN61000-3-2 Class C (@load50%) ; EN61000-3-3; GB17743, GB17625.1; EMC EMISSION EAC TP TC 020; KC KN15, KN61547 Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level(surge immunity:Line-Earth:6KV,Line-Line:4KV); EMC IMMUNITY EAC TP TC 020; KC KN15, KN61547 MTBF 1171.4K hrs min. Telcordia SR-332 (Bellcore) 305Khrs min. MIL-HDBK-217F (25) 180 * 6 3*35.5 mm (L*W*H) OTHERS DIMENSION 0.8Kg;16pcs/13.4Kg/0.67CUFT PACKING NOTE 1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25 of ambient temperature. 2. Please refer to "DRIVING METHODS OF LED MODULE". 3. De-rating may be needed under low input voltages. Please refer to STATIC CHARACTERISTIC sections for details. 4. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time. 5. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. 6. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 80 or less. 7. Please refer to the warranty statement on MEAN WELL's website at http://www.meanwell.com 8.The ambient temperature derating of 3.5/1000m with fanless models and of 5/1000m with fan models for operating altitude higher than 2000m(6500ft). 9. For any application note and IP water proof function installation caution, please refer our user manual before using. https://www.meanwell.com/Upload/PDF/LED_EN.pdf File Name:ELG-75-C-SPEC 2018-09-30 60~75W Constant Current Mode LED Driver ELG-75-C series BLOCK DIAGRAM PFC fosc : 50~120KHz PWM fosc : 60~130KHz I/P EMI FILTER & RECTIFIERS POWER SWITCHING PFC CIRCUIT RECTIFIERS & FILTER O.L.P. O.T.P. O.L.P. PWM & PFC CONTROL Vo+ VoDIM+ DIM(B Type) DETECTION CIRCUIT O.V.P. CASE :Protective Earth DRIVING METHODS OF LED MODULE This series works in constant current mode to directly drive the LEDs. In the constant current region, the highest voltage at the output of the driver depends on the configuration of the end systems. 100 Vo(%) Constant Current area Should there be any compatibility issues, please contact MEAN WELL. 50 (min.) Hiccup Protection 50 100 Io(%) Typical output current normalized by rated current (%) File Name:ELG-75-C-SPEC 2018-09-30 ELG-75-C 60~75W Constant Current Mode LED Driver series DIMMING OPERATION 3 in 1 dimming function (for B/AB-Type) AC/N(Blue) AC/L(Brown) DIM+( Gray )* DIM-(Black)** Vo-(Blue) Vo+(Brown) ELG-75-C * DIM+ for B/AB-Type DA+ for DA-Type PROG+ for D2-Type * *DIM- for B/AB-Type DA- for DA-Type PROG- for D2-Type Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-: 0 ~ 10VDC, or 10V PWM signal or resistance. Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers. Dimming source current from power supply: 100A (typ.) Applying additive 0 ~ 10VDC 100% 90% Vo- + + - - DIM+ + Output current (%) 80% Vo+ 70% 60% 50% 40% 30% Additive Voltage - 20% DIM- 10% "DO NOT connect "DIM- to Vo-" 0% 0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V Dimming input: Additive voltage Applying additive 10V PWM signal (frequency range 100Hz ~ 3KHz): 100% 90% Vo- + + - - DIM+ Output current (%) 80% Vo+ 70% 60% 50% 40% 30% Additive PWM signal 20% DIM- 10% "DO NOT connect "DIM- to Vo-" 0% Applying additive resistance: 100% 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Duty cycle of additive 10V PWM signal dimming input 90% Vo- + 80% + - - DIM+ Additive Resistance Output current (%) Vo+ 70% 60% 50% 40% 30% DIM"DO NOT connect "DIM- to Vo-" 20% 10% 0% Short 10K/N 20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N (N=driver quantity for synchronized dimming operation ) Dimming input: Additive resistance Note : 1. Min. dimming level is about 8% and the output current is not defined when 0%< I out<8%. 2. The output current could drop down to 0% when dimming input is about 0k or 0Vdc, or 10V PWM signal with 0% duty cycle. File Name:ELG-75-C-SPEC 2018-09-30 ELG-75-C 60~75W Constant Current Mode LED Driver series DAL I Interface (primary side; for DA-Type) Apply DALI signal between DA+ and DA-. DAL I protocol comprises 16 groups and 64 addresses. First step is fixed at 8% of output. Smart timer dimming function (for Dxx-Type by User definition) MEAN WELL Smart timer dimming primarily provides the adaptive proportion dimming profile for the output constant current level to perform up to 14 consecutive hours. 3 dimming profiles hereunder are defined accounting for the most frequently seen applications. If other options may be needed, please contact MEAN WELL for details. Ex : D01-Type: the profile recommended for residential lighting Dimming Level(%) Set up for D01-Type in Smart timer dimming software program: T1 T2 T3 T4 TIME** 06:00 07:00 11:00 --- LEVEL** 100% 70% 50% 70% Operating Time(HH:MM) **: TIME matches Operating Time in the diagram whereas LEVEL matches Dimming Level. Example: If a residential lighting application adopts D01-Type, when turning on the power supply at 6:00pm, for instance: [1] The power supply will switch to the constant current level at 100% starting from 6:00pm. [2] The power supply will switch to the constant current level at 70% in turn, starting from 0:00am, which is 06:00 after the power supply turns on. [3] The power supply will switch to the constant current level at 50% in turn, starting from 1:00am, which is 07:00 after the power supply turns on. [4] The power supply will switch to the constant current level at 70% in turn, starting from 5:00am, which is 11:00 after the power supply turns on. The constant current level remains till 8:00am, which is 14:00 after the power supply turns on. Ex: D02-Type: the profile recommended for street lighting Dimming Level(%) Set up for D02-Type in Smart timer dimming software program: T1 T2 T3 T4 T5 TIME** 01:00 03:00 8:00 11:00 --- LEVEL** 50% 80% 100% 60% 80% Operating Time(HH:MM) **: TIME matches Operating Time in the diagram whereas LEVEL matches Dimming Level. Example: If a street lighting application adopts D02-Type, when turning on the power supply at 5:00pm, for instance: [1] The power supply will switch to the constant current level at 50% starting from 5:00pm. [2] The power supply will switch to the constant current level at 80% in turn, starting from 6:00pm, which is 01:00 after the power supply turns on. [3] The power supply will switch to the constant current level at 100% in turn, starting from 8:00pm, which is 03:00 after the power supply turns on. [4] The power supply will switch to the constant current level at 60% in turn, starting from 1:00am, which is 08:00 after the power supply turns on. [5] The power supply will switch to the constant current level at 80% in turn, starting from 4:00am, which is 11:00 after the power supply turns on. The constant current level remains till 6:30am, which is 14:00 after the power supply turns on. File Name:ELG-75-C-SPEC 2018-09-30 ELG-75-C 60~75W Constant Current Mode LED Driver series Ex: D03-Type: the profile recommended for tunnel lighting Dimming Level(%) Set up for D03-Type in Smart timer dimming software program: T1 T2 T3 TIME** 01:30 11:00 --- LEVEL** 70% 100% 70% Operating Time(HH:MM) **: TIME matches Operating Time in the diagram whereas LEVEL matches Dimming Level. Example: If a tunnel lighting application adopts D03-Type, when turning on the power supply at 4:30pm, for instance: [1] The power supply will switch to the constant current level at 70% starting from 4:30pm. [2] The power supply will switch to the constant current level at 100% in turn, starting from 6:00pm, which is 01:30 after the power supply turns on. [3] The power supply will switch to the constant current level at 70% in turn, starting from 5:00am, which is 11:00 after the power supply turns on. The constant current level remains till 6:30am, which is 14:00 after the power supply turns on. File Name:ELG-75-C-SPEC 2018-09-30 ELG-75-C 60~75W Constant Current Mode LED Driver series OUTPUT LOAD vs TEMPERATURE(Note.7) 100 100 80 80 230VAC input only 60 LOAD (%) 60 LOAD (%) 230VAC input only 40 20 -40 -25 -10 0 15 30 50 40 20 70 (HORIZONTAL) 60 -40 -25 0 20 45 AMBIENT TEMPERATURE,Ta () 55 65 75 85 (HORIZONTAL) Tcase () STATIC CHARACTERISTIC POWER FACTOR (PF) CHARACTERISTIC Tcase at 75 100 1 0.98 90 0.96 80 0.94 0.92 60 277V75W 0.9 PF LOAD (%) 70 230V75W 0.88 115V60W 0.86 50 0.84 0.82 40 0.8 50% 100 120 140 160 180 200 240 250 260 270 280 60% 70% 80% 90% 100% 305 INPUT VOLTAGE (V) 60Hz LOAD De-rating is needed under low input voltage. TOTAL HARMONIC DISTORTION (THD) EFFICIENCY vs LOAD ELG-75-C series possess superior working efficiency that up to 91% can be reached in field applications. 350mA Model, Tcase at 75 350mA Model,Tcase at 75 18% 94 16% THD 12% 10% 277V75W 8% 230V75W 6% 115V60W 4% EFFICIENCY(%) 92 14% 90 277V75W 88 230V75W 86 115V60W 84 82 2% 80 0% 50% 60% 70% 80% LOAD 90% 100% 50% 60% 70% 80% 90% 100% LOAD File Name:ELG-75-C-SPEC 2018-09-30 ELG-75-C 60~75W Constant Current Mode LED Driver series LIFE TIME 120 100 LIFETIME(Kh) 80 60 40 20 0 20 30 40 50 60 70 80 90 Tcase ( ) File Name:ELG-75-C-SPEC 2018-09-30 ELG-75-C 60~75W Constant Current Mode LED Driver series MECHANICAL SPECIFICATION CASE NO.: 243A Blank-Type Unit:mm 180 169 30020 AC/N(Blue) AC/L(Brown) Vo-(Blue) Vo+(Brown) 85 tc SJOW 17AWGx2C &H05RN-F 1.0mm 2 20 SJOW 17AWGx2C &H05RN-F 1.0mm 2 63 156 45.8 30020 : Max. Case Temperature 35 tc 35.5 4-4.5 A-Type 180 169 156 AC/N(Blue) AC/L(Brown) tc Vo-(Blue) Vo+(Brown) 85 SJOW 17AWGx2C &H05RN-F 1.0mm 2 20 SJOW 17AWGx2C &H05RN-F 1.0mm 2 63 30020 45.8 30020 4-4.5 35 35.5 : Max. Case Temperature 21 tc 44.25 File Name:ELG-75-C-SPEC 2018-09-30 ELG-75-C 60~75W Constant Current Mode LED Driver series AB-Type 180 169 156 AC/N(Blue) AC/L(Brown) SJOW 17AWGx2C &H05RN-F 1.0mm 2 DIM+( Gray ) DIM-(Black) Vo-(Blue) Vo+(Brown) 85 tc SJOW 17AWGx2C &H05RN-F 1.0mm 2 20 SJOW 17AWGx2C &H05RN-F 1.0mm 2 63 30020 45.8 30020 4-4.5 21 35 : Max. Case Temperature 35.5 tc 44.25 B/DA/D2-Type 180 169 156 AC/N(Blue) AC/L(Brown) tc DIM+( Gray )* DIM-(Black)** Vo-(Blue) Vo+(Brown) SJOW 17AWGx2C &H05RN-F 1.0mm 2 4-4.5 35 : Max. Case Temperature * DIM+ for B-Type DA+ for DA-Type PROG+ for D2-Type * *DIM- for B-Type DA- for DA-Type PROG- for D2-Type 35.5 tc SJOW 17AWGx2C &H05RN-F 1.0mm 2 85 20 SJOW 17AWGx2C &H05RN-F 1.0mm 2 63 30020 45.8 30020 File Name:ELG-75-C-SPEC 2018-09-30 60~75W Constant Current Mode LED Driver ELG-75-C series 3Y Model (3-wire input) 180 169 tc SJOW 17AWGx3C &H05RN-F 1.0mm 2 85 20 AC/N(Blue) AC/L(Brown) PE (Green/Yellow) 63 156 45.8 30020 SJOW 17AWGx2C &H05RN-F 1.0mm 2 4-4.5 tc : Max. Case Temperature Note1: Please connect the case to PE for the complete EMC deliverance and safety use. Note2: Please contact MEAN WELL for input wiring option with PE. Installation Manual Please refer to : http://www.meanwell.com/manual.html File Name:ELG-75-C-SPEC 2018-09-30