ELG-75-C700B - MEAN WELL ENTERPRISES

60~75W Constant Current Mode LED Driver ELG-75-C series

■Features ■Applications

■Model Encoding

- C500ELG - 75 A

Output wattage

Series name

■Description

ELG-75-C series is a 75W LED AC/DC driver featuring the constant current mode and

high voltage output. ELG-75-C operates from 100~305VAC and offers models with different

rated current ranging between 350mA and 1400mA. Thanks to the high efficiency up to 91%,

with the fanless design, the entire series is able to operate for -40 ~+85 case temperature under℃℃

free air convection. The design of metal housing and IP67/IP65 ingress protection level allows

this series to fit both indoor and outdoor applications. ELG-75-C is equipped with various function

options, such as dimming methodologies, so as to provide the optimal design flexibility for LED

lighting system.

Constant Current mode output

Metal housing design with functional Ground

Built-in active PFC function

<0.5WNo load / Standby power consumption

IP67 / IP65 rating for indoor or outdoor installations

Function options: output adjustable via potentiometer;

3 in 1 dimming (dim-to-off); Smart timer dimming; DALI

Typical lifetime>50000 hours

5 years warranty

LED street lighting

LED harbor lighting

LED bay lighting

LED greenhouse lighting

LED flood lighting

Type HL for use in Class I, Division 2

(Classified) location.hazardous

Rated output current (350/500/700/1050/1400mA)

Function options

Type

Blank

IP Level

IP67

IP65

IP67

Io fixed.

Io adjustable through built-in potentiometer.

3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistance)

Function Note

In Stock

110

IP67

IP65

Type HL

(for DA-Type only)

IP67

DALI control technology.

Built-in Smart timer dimming function by user request.

Built-in Smart timer dimming and programmable function.

In Stock

By request

In Stock

File Name:ELG-75-C-SPEC 2018-09-30

Input wiring type Blank:2-wire input for standard model

-{3Y:3-wire input for standard model

IS 15885(Part 2/Sec13)

R-41027766

THOMAS SAMUEL

(for 700A/1050Aonly)

AB IP65 Io adjustable through built-in potentiometer &

3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistance) In Stock

60~75W Constant Current Mode LED Driver ELG-75-C series

SPECIFICATION

MODEL

RATED CURRENT

RATED POWER Note.5

OUTPUT

CURRENT ADJ. RANGE

SET UP TIME Note.4

VOLTAGE RANGE Note.3

FREQUENCY RANGE

POWER FACTOR (Typ.)

EFFICIENCY (Typ.)

AC CURRENT(Typ.)

INPUT

INRUSH CURRENT(Typ.)

LEAKAGE CURRENT

SAFETY STANDARDS

EMC IMMUNITY

WORKING TEMP.

WORKING HUMIDITY

STORAGE TEMP., HUMIDITY

TEMP. COEFFICIENT

VIBRATION

MTBF

DIMENSION

OTHERS

NOTE

PACKING

OVER TEMPERATURE

OVER VOLTAGE

500ms/115VAC,230VAC

(Please refer to "STATIC CHARACTERISTIC" )

section

47 ~ 63Hz

PF 0.97/115VAC, PF 0.95/230VAC, PF 0.92/277VAC@full load≧≧≧

(Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)

0.7A / 115VAC 0.45A / 230VAC 0.38A/277VAC

<0.75mA / 277VAC

Compliance to EN55015,EN61000-3-2 Class C (@load 50%) ; EN61000-3-3;≧GB17743, GB17625.1;

EAC TP TC 020; KC KN15 KN61547,

20 ~ 95% RH non-condensing

-40 ~ +80 , 10 ~ 95% RH℃

±℃ ℃0.03%/ (0 ~ 60 )

10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes

180 6* 3*35.5 mm (L*W*H)

ENVIRONMENT

EMC EMISSION

SAFETY &

EMC

PROTECTION

225 ~ 260V

Shut down o/p voltage, re-power on to recover

SHORT CIRCUIT

91%

107 ~ 214V

ELG-75-C350 ELG-75-C700

Hiccup mode, recovers automatically after fault condition is removed

175 ~ 350mA 350 ~ 700mA

350mA

74.9W

I/P-O/P:3.75KVAC I/P-FG:2.0KVAC O/P-FG:1.5KVAC

I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH℃

WITHSTAND VOLTAGE

ISOLATION RESISTANCE

90%

115 ~ 140V

53 ~ 107V

700mA

74.9W

ELG-75-C1050

525 ~ 1050mA

90%

80 ~ 100V

35 ~ 71V

1050mA

74.55W

CURRENT TOLERANCE

±5.0%

160 ~ 190V

91%

75 ~ 150V

ELG-75-C500

250 ~ 500mA

500mA

75W

ELG-75-C1400

700 ~ 1400mA

90%

64 ~ 79V

27 ~ 54V

1400mA

75.6W

CONSTANT CURRENT REGION

Note.2

THD< 20%(@load 50%/115VC,230VAC; @load 75%/277VAC)≧≧

(Please refer to “TOTAL HARMONIC DISTORTION(THD)” section)

TOTAL HARMONIC DISTORTION

OPEN CIRCUIT VOLTAGE

(max.)

224V 114V 78V

158V 61V

Adjustable for A/AB-Type only (via built-in potentiometer)

COLD START 50A(twidth= s measured at 50% Ipeak)/230VAC350 Per NEMA 410μ;

MAX. No. of PSUs on 16A

CIRCUIT BREAKER 5 units (circuit breaker of type B) / 8 units (circuit breaker of type C) at 230VAC

Tcase=-40 ~ +85 (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)℃

MAX. CASE TEMP. Tcase=+85℃

Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level(surge immunity:Line-Earth:6KV,Line-Line:4KV);

EAC TP TC 020; KC KN15 KN61547,

1. All parameters NOT specially mentioned are measured at 230VAC input, rated and 25 of ambient temperature.current ℃

2. Please refer to "DRIVING METHODS OF LED MODULE".

3. De rating may be needed under low input voltages. Please .- refer to STATIC CHARACTERISTIC sections for details

4. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time.

5. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the

complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.

6. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 80 or less.℃

7. Please refer to the warranty statement on MEAN WELL's website at http://www.meanwell.com

8.The ambient temperature derating of 3.5 /1000m with fanless models and of 5 /1000m with fan models for operating altitude higher than 2000m(6500ft).℃℃

9. For any application note and IP water proof function installation caution, please refer our user manual before using.

https://www.meanwell.com/Upload/PDF/LED_EN.pdf

0.8Kg;16pcs/13.4Kg/0.67CUFT

CURRENT RIPPLE 5.0% max. @rated current

100 ~ 305VAC 142 ~ 431VDC

No load power consumption <0.5W for Blank / A / Dx / D2-Type

NO LOAD / STANDBY

POWER CONSUMPTION Standby power consumption <0.5W for B / AB / DA -Type

UL8750 independent, EN62384;(type”HL”), CSA C22.2 No. 250.13-12;EN/AS/NZS 61347-1, EN/AS/NZS 61347-2-13

;IP65 or IP67; ;GB19510.1, GB19510.14EAC TP TC 004;BIS IS15885(for 700A/1050A only)

approvedKC61347 1 KC61347 2 13-, --

1171.4K hrs min. Telcordia SR-332 (Bellcore) 305Khrs min. MIL-HDBK-217F (25 )℃

DALI STANDARDS Compliance to IEC62386-101, 102, 207 for DA-Type only

60W

59.85W 59.85W

59.5W 60.2W

200VAC ~ 305VAC

100VAC ~ 180VAC

File Name:ELG-75-C-SPEC 2018-09-30

60~75W Constant Current Mode LED Driver ELG-75-C series

BLOCK DIAGRAM

DETECTION

PWM & PFC CIRCUIT

O.L.P.O.T.P.

EMI FILTER

RECTIFIERS

POWER

SWITCHING

FILTER

RECTIFIERS Vo+

Vo-

I/P

CONTROL

O.V.P.

O.L.P.

PFC

CIRCUIT

PFC fosc : 50~120KHz

PWM fosc : 60~130KHz

DIM+

(B Type)

DIM-

DRIVING METHODS OF LED MODULE

※This series works in constant current mode to directly drive the LEDs.

Typical output current normalized by rated current (%)

In the constant current region, the highest voltage at the output of the driver

depends on the configuration of the end systems.

Should there be any compatibility issues, please contact MEAN WELL.

100

(min.)

Vo(%)

50 100 Io(%)

Constant

Current area

Hiccup

Protection

CASE :Protective Earth

File Name:ELG-75-C-SPEC 2018-09-30

60~75W Constant Current Mode LED Driver ELG-75-C series

DIMMING OPERATION

ELG-75-C

※3 in 1 dimming function (for B/AB-Type)

Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-:

0 ~ 10VDC, or 10V PWM signal or resistance.

Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers.

Dimming source current from power supply: 100 A (typ.)μ

◎Applying additive 0 ~ 10VDC

◎Applying additive 10V PWM signal (frequency range 100Hz ~ 3KHz):

◎Applying additive resistance:

Note : 1. Min. dimming level is about 8% and the output current is not defined when 0%< out<8%.I

2. The output current could drop down to 0% when dimming input is about 0k or 0Vdc, or 10V PWM signal with 0% duty cycle.Ω

Vo+

Vo-

DIM+

DIM-

“DO NOT connect "DIM- to Vo-"

Additive Voltage

DIM+

DIM-

“DO NOT connect "DIM- to Vo-"

Additive PWM signal

Vo+

Vo-

DIM+

DIM-

“DO NOT connect "DIM- to Vo-"

Additive Resistance

0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V

10%

20%

30%

40%

50%

60%

70%

80%

90%

100%

Output current (%)

10% 20% 30% 40% 50% 60% 70% 80% 90% 100%

10%

20%

30%

40%

50%

60%

70%

80%

90%

100%

Output current (%)

10%

20%

30%

40%

50%

60%

70%

80%

90%

100%

Output current (%)

Dimming input: Additive voltage

Duty cycle of additive 10V PWM signal dimming input

Short

10K/N 20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N

(N=driver quantity for synchronized )dimming operation

Dimming input: Additive resistance

* DIM+ for B/AB-Type

DA+ for DA-Type

PROG+ for D2-Type

* *DIM- for B/AB-Type

DA- for DA-Type

PROG- for D2-Type

AC/L(Brown)

AC/N(Blue) DIM-(Black)**

DIM+( )*Gray

Vo+(Brown)

Vo-(Blue)

Vo+

Vo-

File Name:ELG-75-C-SPEC 2018-09-30

※DAL Interface (primary side; for DA-Type)I

Apply DALI signal between DA+ and DA-.

DAL protocol comprises 16 groups and 64 addresses.I

First step is fixed at 8% of output.

※Smart timer dimming function (for Dxx-Type by User definition)

MEAN WELL Smart timer dimming primarily provides the adaptive proportion dimming profile for the output constant current level to perform up to 14

consecutive hours. 3 dimming profiles hereunder are defined accounting for the most frequently seen applications. If other options may be needed,

please contact MEAN WELL for details.

Ex : D01-Type: the profile recommended for residential lighting◎

Ex: D02-Type: the profile recommended for street lighting◎

**: TIME matches Operating Time in the diagram whereas LEVEL matches Dimming Level.

Example: If a residential lighting application adopts D01-Type, when turning on the power supply at 6:00pm, for instance:

[1] The power supply will switch to the constant current level at 100% starting from 6:00pm.

[2] The power supply will switch to the constant current level at 70% in turn, starting from 0:00am, which is 06:00 after the power supply turns on.

[3] The power supply will switch to the constant current level at 50% in turn, starting from 1:00am, which is 07:00 after the power supply turns on.

[4] The power supply will switch to the constant current level at 70% in turn, starting from 5:00am, which is 11:00 after the power supply turns on.

The constant current level remains till 8:00am, which is 14:00 after the power supply turns on.

**: TIME matches Operating Time in the diagram whereas LEVEL matches Dimming Level.

Example: If a street lighting application adopts D02-Type, when turning on the power supply at 5:00pm, for instance:

[1] The power supply will switch to the constant current level at 50% starting from 5:00pm.

[2] The power supply will switch to the constant current level at 80% in turn, starting from 6:00pm, which is 01:00 after the power supply turns on.

[3] The power supply will switch to the constant current level at 100% in turn, starting from 8:00pm, which is 03:00 after the power supply turns on.

[4] The power supply will switch to the constant current level at 60% in turn, starting from 1:00am, which is 08:00 after the power supply turns on.

[5] The power supply will switch to the constant current level at 80% in turn, starting from 4:00am, which is 11:00 after the power supply turns on. The

constant current level remains till 6:30am, which is 14:00 after the power supply turns on.

Set up for D01-Type in Smart timer dimming software program:

Set up for D02-Type in Smart timer dimming software program:

TIME**

06:00

01:00

T4 T5

07:00

03:00

11:00

8:00 11:00

---

LEVEL**

100% 70%

80%50%

50%

100%

70%

60% 80%

Dimming Level(%)

Operating Time(HH:MM)

Dimming Level(%)

Operating Time(HH:MM)

60~75W Constant Current Mode LED Driver ELG-75-C series

File Name:ELG-75-C-SPEC 2018-09-30

Ex: D03-Type: the profile recommended for tunnel lighting◎

Set up for D03-Type in Smart timer dimming software program:

TIME** 01:30

T1 T2 T3

11:00 ---

LEVEL** 70% 100% 70%

**: TIME matches Operating Time in the diagram whereas LEVEL matches Dimming Level.

Example: If a tunnel lighting application adopts D03-Type, when turning on the power supply at 4:30pm, for instance:

[1] The power supply will switch to the constant current level at 70% starting from 4:30pm.

[2] The power supply will switch to the constant current level at 100% in turn, starting from 6:00pm, which is 01:30 after the power supply turns on.

[3] The power supply will switch to the constant current level at 70% in turn, starting from 5:00am, which is 11:00 after the power supply turns on.

The constant current level remains till 6:30am, which is 14:00 after the power supply turns on.

Dimming Level(%)

Operating Time(HH:MM)

60~75W Constant Current Mode LED Driver ELG-75-C series

File Name:ELG-75-C-SPEC 2018-09-30

10%

12%

14%

16%

18%

50% 60% 70% 80% 90% 100%

277V（75W）

230V（75W）

115V（60W）

0.8

0.82

0.84

0.86

0.88

0.9

0.92

0.94

0.96

0.98

50% 60% 70% 80% 90% 100%

277V（75W）

230V（75W）

115V（60W）

50% 60% 70% 80% 90% 100%

277V（75W）

230V（75W）

115V（60W）

60~75W Constant Current Mode LED Driver ELG-75-C series

LOAD

OUTPUT LOAD vs TEMPERATURE(Note.7)

STATIC CHARACTERISTIC

TOTAL HARMONIC DISTORTION (THD)

AMBIENT TEMPERATURE,Ta ( )℃

LOAD (%)

INPUT VOLTAGE (V) 60Hz

LOAD (%)

(HORIZONTAL)

POWER FACTOR (PF) CHARACTERISTIC

Tcase ( )℃

LOAD (%)

(HORIZONTAL)

※De-rating is needed under low input voltage.

EFFICIENCY vs LOAD

ELG-75-C series possess superior working efficiency that up to 91% can

be reached in field applications.

-40 -25 0 20 45 55 65 75 85

100

※350mA Model,Tcase at 75℃※350mA Model, Tcase at 75℃

EFFICIENCY(%)

LOAD

THD

LOAD

100 120 140 160 180 200 240 250 260 270 280 305

100

230VAC

input only

-40 -25 0-10 15 30 50 60 70

100

※Tcase at 75℃

230VAC

input only

File Name:ELG-75-C-SPEC 2018-09-30

100

120

20 30 40 50 60 70 80 90

60~75W Constant Current Mode LED Driver ELG-75-C series

LIFE TIME

Tc a s e )(℃

LIFETIME(Kh)

File Name:ELG-75-C-SPEC 2018-09-30

MECHANICAL SPECIFICATION

60~75W Constant Current Mode LED Driver ELG-75-C series

CASE NO.: 243A Unit:mm

169

180

156

45.8

300±20300±20

35.5

※Blank-Type

: Max. Case Temperature

※A-Type

AC/L(Brown)

AC/N(Blue)

169

180

156

45.8

300±20

35.5

44.25

4- 4.5ψ

Vo+(Brown)

Vo-(Blue)

AC/L(Brown)

AC/N(Blue)

: Max. Case Temperature

Vo+(Brown)

Vo-(Blue)

SJOW 17AWGx2C

&H05RN-F 1.0mm2

SJOW 17AWGx2C

&H05RN-F 1.0mm2

SJOW 17AWGx2C

&H05RN-F 1.0mm2

SJOW 17AWGx2C

&H05RN-F 1.0mm2

File Name:ELG-75-C-SPEC 2018-09-30

※B/DA/D2-Type

169

180

156

45.8

300±20

35.5

4- 4.5ψ

AC/L(Brown)

AC/N(Blue)

60~75W Constant Current Mode LED Driver ELG-75-C series

: Max. Case Temperature

* DIM+ for B-Type

DA+ for DA-Type

PROG+ for D2-Type

* *DIM- for B-Type

DA- for DA-Type

PROG- for D2-Type

SJOW 17AWGx2C

&H05RN-F 1.0mm2SJOW 17AWGx2C

&H05RN-F 1.0mm2

DIM-(Black)**

DIM+( )*Gray

Vo+(Brown)

Vo-(Blue)

SJOW 17AWGx2C

&H05RN-F 1.0mm2

File Name:ELG-75-C-SPEC 2018-09-30

※AB-Type

44.25

169

180

156

45.8

300±20

35.5

4- 4.5ψ

AC/L(Brown)

AC/N(Blue)

: Max. Case Temperature

SJOW 17AWGx2C

&H05RN-F 1.0mm2SJOW 17AWGx2C

&H05RN-F 1.0mm2

DIM-(Black)

DIM+( )Gray

Vo+(Brown)

Vo-(Blue)

SJOW 17AWGx2C

&H05RN-F 1.0mm2

Installation Manual

Please refer to : http://www.meanwell.com/manual.html

60~75W Constant Current Mode LED Driver ELG-75-C series

◎Note1: Please connect the case to PE for the complete EMC deliverance and safety use.

◎Note2: Please contact MEAN WELL for input wiring option with PE.

※3Y Model (3-wire input)

AC/L(Brown)

AC/N(Blue)

PE (Green/Yellow)

: Max. Case Temperature

169

180

156

45.8

300±20

4- 4.5ψ

SJOW 17AWGx3C

&H05RN-F 1.0mm2

SJOW 17AWGx2C

&H05RN-F 1.0mm2

File Name:ELG-75-C-SPEC 2018-09-30