EC9888-000 - TE CONNECTIVITY

TTDS-263 ZHD-SCE HEAT SHRINK IDENTIFICATION MARKER SLEEVES

PAGE 1

CLASS 1 DATA CLASSIFICATION - SEE POLICY TEC-02-04

ZHD-SCE Zero Halogen, Diesel Resistant, Heat Shrink Identification Marker Sleeves for the

identification of wires and cables.

ZHD-SCE is presented as cut sleeves organised in ladder format.

Manufactured using a specially developed radiation cross-linked, zero halogen material.

ZHD-SCE is designed specifically to bridge the gap for installations where the highest

performance is demanded from an identification sleeve, without compromising on safety or

capability.

ZHD-SCE Heat Shrink Identification Marker Sleeves are available as part of a complete

identification system. The system comprises specific printers, thermal transfer ribbons and

WINTOTAL software.

ZHD-SCE

LOW FIRE HAZARD

DIESEL RESISTANT

HEAT SHRINK IDENTIFICATION SYSTEM

Technical Datasheet

TTDS-263 Revision 7 April 2017

TTDS-263 ZHD-SCE HEAT SHRINK IDENTIFICATION MARKER SLEEVES

PAGE 2

CLASS 1 DATA CLASSIFICATION - SEE POLICY TEC-02-04

Where possible, TE has tested product as a finished item, including the print. Operational tests are followed by an

assessment of mark adherence to validate fit form and function. Further details can be found in TE standard RW-2536.

• Zero Halogen

• Low Toxic Fumes

• Non-flame propagating

• Resistant to key rail and industrial fluids including

diesel (defined by RW-2536)

• Sleeve diameters from 2.4mm to 38.1mm

• Shrink ratio 2:1

• Pre-termination Cable Identification

• No Halogens, Sulphur, Nitrogen, Phosphorus and

Cadmium sources above trace level. The flame re-

tardant used in this product does not contain mela-

mine cyanurate

• Further information and a downloadable declaration

covering RoHS and REACH compliance can be found

at the ‘TE Product Compliance Support Centre’:

http://www.te.com/usa-en/utilities/product-

compliance.html

Features Environmental Compliance

Applications

Specifications / Approvals

TE Connectivity Standard RW-2536

Rail Standards EN45545-2, Hazard Classifications 1 and 2, In accordance with

requirement set R22/R23

BS 6853 Code of practice for fire precautions in the design and construction of

passenger carrying trains.

Interior minor use of materials of mass 100g to 500g vehicle category II

EN 50343 Rolling stock applications - Rolling stock - Rules for installation of cabling

- Appendix H

NFPA 130 Standard for Fixed Guideway Transit and Passenger Rail Systems,

Fire protection requirements, Interior Fire Propagation Resistance

SHAZAINENNSHI, Japan Railway Rolling Stock & Machinery Association 2003

Classification ‘Flame Retardant’ Serial number 2015-166K

Federal Railroad Administration, DOT, Appendix B to Part 238, Test Methods

and Performance Criteria for the Flammability and Smoke Emission Characteristics of

Materials used in Passenger Cars and Locomotive Cabs

ZHD-SCE, LOW FIRE HAZARD, DIESEL RESISTANT

Temperature Rating Shelf Life

• -55°C to 125°C (-67°F to 257°F) • Refer to TE document 408-121006 Cable Identification

Shelf Life

TTDS-263 ZHD-SCE HEAT SHRINK IDENTIFICATION MARKER SLEEVES

PAGE 3

CLASS 1 DATA CLASSIFICATION - SEE POLICY TEC-02-04

Specify product name, pack size (leave blank for 250), sleeve size (in mm),

sleeve length (always 50), pre-score (leave blank if not required) and colour

Part Description

ZHD-SCE -4.8 -50 -S1 -9

9 Colour

S1 Scoring (Optional)

50 Sleeve Length (mm)

4.8 Expanded Inside Diameter (mm)

1K Pack size

ZHD-SCE Product family

-1K

Dimensions in mm (inches)

Ordering Information

Inside diameter Recommended cable diameter use

range

As supplied

(minimum)

After recovery

(Maximum)

mm inches mm inches mm inches

ZHD-SCE - <pack size> - 2.4 - 50 - <score> - <colour> 2.4 0.094 1.19 0.047 1.27 to 1.90 0.050 to 0.075

ZHD-SCE - <pack size> - 3.2 - 50 - <score> - <colour> 3.2 0.126 1.58 0.060 1.77 to 2.66 0.069 to 0.105

ZHD-SCE - <pack size> - 4.8 - 50 - <score> - <colour> 4.8 0.189 2.36 0.090 2.54 to 4.06 0.100 to 0.160

ZHD-SCE - <pack size> - 6.4 - 50 - <score> - <colour> 6.4 0.250 3.18 0.125 3.81 to 5.46 0.150 to 0.215

ZHD-SCE - <pack size> - 9.5 - 50 - <score> - <colour> 9.5 0.375 4.75 0.187 5.59 to 8.12 0.220 to 0.320

ZHD-SCE - <pack size> - 12.7 - 50 - <score> - <colour> 12.7 0.500 6.35 0.250 6.99 to 10.79 0.275 to 0.425

ZHD-SCE - <pack size> - 19.0 - 50 - <score> - <colour> 19.0 0.730 9.53 0.375 10.16 to 16.25 0.400 to 0.640

ZHD-SCE - <pack size> - 25.4 - 50 - <score> - <colour> 25.4 1.000 12.70 0.500 14.29 to 21.59 0.563 to 0.850

ZHD-SCE - 38.1 - 50 - <score> - <colour> 38.1 1.500 19.05 0.750 20.95 to 33.02 0.825 to 1.300

Ordering description

Pre-scoring Perforated score to produce multiple marker sleeves from each

ZHD-SCE sleeve.

Not scored Code Blank

Side scored Code SS

Sided scored with one

pre-score Code SS1

1 Pre-score Code S1

2 Pre-scores Code S2

Packaging sizes

<blank> 250 piece packs available for all sizes

1K 1000 piece reels available for all sizes up

to 25.4

2.5K 2500 piece reels available for sizes

4.8 up to 25.4

5K 5000 piece reels available for sizes

2.4 and 3.2

Colours Yellow White

Code 4 9

Red Green Blue Orange

Code 2 5 6 3

Options

ZHD-SCE

LOW FIRE HAZARD, DIESEL RESISTANT

49 (0.92 NOMINAL)

PERFORATIONS

SLEEVE

WIDTH

CARRIER

PRE-SCORE

(S1)

FIXING TAPE

SIDE SCORE

(SS)

TTDS-263 ZHD-SCE HEAT SHRINK IDENTIFICATION MARKER SLEEVES

PAGE 4

CLASS 1 DATA CLASSIFICATION - SEE POLICY TEC-02-04

Software

Print quality and print performance can only be

guaranteed when specific TE printer and ribbons are

used.

The current list of printers and ribbons can be found in

TE document 411-121005 ‘Identification Printer Product

Ribbon Matrix’. This document can be found in ‘Access

Our Tools’:

http://www.te.com/usa-en/utilities/access-product-tools-

and-resources.html

Printer Information

ZHD-SCE

LOW FIRE HAZARD, DIESEL RESISTANT

WINTOTAL software, available to download for a 14 day

evaluation period from the Identification Printer Software

page:

http://www.te.com/usa-en/products/identification-labeling/

printers-software.html

Contact a TE representative for further information

www.te.com/rail

TE Connectivity, TE Connectivity (logo) and Every Connection Counts are trademarks. All other logos, products and/or company names referred to herein might be trademarks

of their respective owners.

The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connec-

tivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE

Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising

out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for

the specific application.