PRODUCT FAMILY DATA SHEET
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and
XLamp® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
WWW.CREE.COM/XLAMP
CLD-DS56 REV 11A
Cree® XLamp® XP-E2 LEDs
PRODUCT DESCRIPTION
The XLamp® XP-E2 LED builds on the unprecedented
performance of the original XP-E by increasing lumen output up
to 20% while providing a single die LED point source for precise
optical control. The XP-E2 LED shares the same footprint as the
original XP-E, providing a seamless upgrade path to more lumens
and/or greater efciency while shortening the design cycle for
existing XP customers.
XLamp XP-E2 LEDs are the ideal choice for lighting applications
where high light output and maximum efcacy are required,
such as LED retrot lamps, outdoor, portable, indoor directional,
emergency vehicle or architectural.
FEATURES
• Available in white, outdoor white, 80-CRI, 85-CRI, 90-CRI
white, royal blue, blue, green, PC amber, amber, red-orange,
red, photo red & far red
• ANSI-compatible chromaticity bins
• White binned at 85°C
• Maximum drive current: 1A
• Low thermal resistance: as low as 5°C/W
• Wide viewing angle: 110°-140°
• Unlimited oor life at ≤30°C/85% RH
• Reow solderable - JEDEC J-STD-020C compatible
• Electrically neutral thermal path
• RoHS and REACh compliant
• UL® recognized component (E349212)
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
2
XLAMP® XP-E2 LED
TABLE OF CONTENTS
Characteristics ....................................................................................................................................................................................................... 3
Flux Characteristics - White ................................................................................................................................................................................... 4
Flux Characteristics - Color ................................................................................................................................................................................. 10
Relative Spectral Power Distribution .................................................................................................................................................................. 16
Relative Flux vs. Junction Temperature .............................................................................................................................................................. 17
Electrical Characteristics - White ........................................................................................................................................................................ 18
Electrical Characteristics - Color ......................................................................................................................................................................... 18
Relative Flux vs. Current - White .......................................................................................................................................................................... 19
Relative Flux vs. Current - Color .......................................................................................................................................................................... 19
Relative Chromaticity vs. Current and Temperature .......................................................................................................................................... 20
Typical Spatial Distribution .................................................................................................................................................................................. 21
Thermal Design .................................................................................................................................................................................................... 22
Performance Groups - Luminous Flux ................................................................................................................................................................ 24
Performance Groups - Radiant Flux .................................................................................................................................................................... 25
Performance Groups - Chromaticity ................................................................................................................................................................... 26
Performance Groups - Dominant Wavelength ................................................................................................................................................... 29
Performance Groups - Peak Wavelength............................................................................................................................................................ 30
Performance Groups - Forward Voltage ............................................................................................................................................................. 30
Cree’s Standard Chromaticity Regions Plotted on the 1931 CIE Curve ............................................................................................................ 31
Cree’s Standard Cool White Kits Plotted on ANSI Standard Chromaticity Regions ......................................................................................... 32
Cree’s Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions .................................................................. 33
Cree’s PC Amber Kit Plotted on the 1931 CIE Curve .......................................................................................................................................... 34
Cree’s 2200K CCT White Kits Plotted on ANSI Standard Chromaticity Regions ............................................................................................. 35
Cree’s Standard Chromaticity Kits ...................................................................................................................................................................... 36
Bin and Order Code Formats ............................................................................................................................................................................... 37
Reow Soldering Characteristics ........................................................................................................................................................................ 38
Notes .................................................................................................................................................................................................................... 39
Mechanical Dimensions ...................................................................................................................................................................................... 41
Tape and Reel ....................................................................................................................................................................................................... 42
Packaging ............................................................................................................................................................................................................. 43
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
3
XLAMP® XP-E2 LED
CHARACTERISTICS
Characteristics Unit Minimum Typical Maximum
Thermal resistance, junction to solder point - white, royal blue, blue °C/W 9
Thermal resistance, junction to solder point - green °C/W 15
Thermal resistance, junction to solder point - PC amber °C/W 9
Thermal resistance, junction to solder point - amber °C/W 7
Thermal resistance, junction to solder point - red-orange, red °C/W 5
Thermal resistance, junction to solder point - photo red, far red °C/W 8
Viewing angle (FWHM) - white degrees 110
Viewing angle (FWHM) - royal blue, blue, green degrees 135
Viewing angle (FWHM) - PC amber degrees 110
Viewing angle (FWHM) - amber, red-orange, red, photo red degrees 130
Viewing angle (FWHM) - far red degrees 140
Temperature coefcient of voltage - white mV/°C -2.3
Temperature coefcient of voltage - royal blue, blue mV/°C -3.3
Temperature coefcient of voltage - green mV/°C -3.8
Temperature coefcient of voltage - PC amber mV/°C -2.5
Temperature coefcient of voltage - amber, red-orange, red mV/°C -1.8
Temperature coefcient of voltage - photo red mV/°C -1.6
Temperature coefcient of voltage - far red mV/°C -1.0
ESD withstand voltage (HBM per Mil-Std-883D)- white, royal blue, blue, green V 8000
ESD classication (HBM per Mil-Std-883D) - PC amber, amber, red-orange, red, photo red, far red Class 2
DC forward current mA 1000
Reverse voltage V 5
Forward voltage (@ 350mA, 85°C) - white V 2.9 3.25
Forward voltage (@ 700mA, 85°C) - white V3.05
Forward voltage (@ 1000mA, 85°C) - white V3.15
Forward voltage (@ 350 mA, 25°C) - royal blue, blue V3.1 3.5
Forward voltage (@ 1000 mA, 25°C) - royal blue, blue V3.4
Forward voltage (@ 350 mA, 25°C) - green V3.2 3.8
Forward voltage (@ 1000 mA, 25°C) - green V3.7
Forward voltage (@ 350 mA, 25°C) - PC amber V3.05 3.5
Forward voltage (@ 1000 mA, 25°C) - PC amber V3.28
Forward voltage (@ 350 mA, 25°C) - amber, red-orange, red, V 2.2 2.6
Forward voltage (@ 1000 mA, 25°C) - amber, red-orange, red V 2.65
Forward voltage (@ 350 mA, 25°C) - photo red V 2.05 2.5
Forward voltage (@ 1000 mA, 25°C) - photo red V2.42
Forward voltage (@ 350 mA, 25°C) - far red V 1.85 2.4
Forward voltage (@ 1000 mA, 25°C) - far red V2.24
LED junction temperature °C 150
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
4
XLAMP® XP-E2 LED
Notes:
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 39).
• Cree XLamp XP-E2 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
* Flux values @ 25°C are calculated and for reference only.
** Calculated ux values at 700mA and 1A are for reference only.
FLUX CHARACTERISTICS - WHITE (TJ=85°C)
The following tables provide order codes for XLamp XP-E2 white LEDs. For a complete description of the order code nomenclature,
please see the Bin and Order Code Formats section (page 37). For denitions of the chromaticity kits, please see the Cree’s Standard
Chromaticity Kits section (page 36).
Chromaticity Minimum Luminous Flux @
350mA
Calculated Minimum
Luminous Flux (lm)**
@ 85°C
Order Codes
Kit CCT Code Flux (lm)
@ 85°C
Flux (lm)
@ 25°C* 700mA 1.0A 70 CRI Typical
51 6200 K
R4 130 151 223 284 XPEBWT-L1-0000-00G51
R3 122 142 209 266 XPEBWT-L1-0000-00F51
R2 114 132 195 249 XPEBWT-L1-0000-00E51
Q5 107 124 183 233 XPEBWT-L1-0000-00D51
Q4 100 116 171 218 XPEBWT-L1-0000-00C51
53 6000 K
R4 130 151 223 284 XPEBWT-L1-0000-00G53
R3 122 142 209 266 XPEBWT-L1-0000-00F53
R2 114 132 195 249 XPEBWT-L1-0000-00E53
Q5 107 124 183 233 XPEBWT-L1-0000-00D53
Q4 100 116 171 218 XPEBWT-L1-0000-00C53
50 6200 K
R4 130 151 223 284 XPEBWT-L1-0000-00G50
R3 122 142 209 266 XPEBWT-L1-0000-00F50
R2 114 132 195 249 XPEBWT-L1-0000-00E50
Q5 107 124 183 233 XPEBWT-L1-0000-00D50
Q4 100 116 171 218 XPEBWT-L1-0000-00C50
E1 6500 K
R4 130 151 223 284 XPEBWT-L1-0000-00GE1
R3 122 142 209 266 XPEBWT-L1-0000-00FE1
R2 114 132 195 249 XPEBWT-L1-0000-00EE1
Q5 107 124 183 233 XPEBWT-L1-0000-00DE1
Q4 100 116 171 218 XPEBWT-L1-0000-00CE1
E2 5700 K
R4 130 151 223 284 XPEBWT-L1-0000-00GE2
R3 122 142 209 266 XPEBWT-L1-0000-00FE2
R2 114 132 195 249 XPEBWT-L1-0000-00EE2
Q5 107 124 183 233 XPEBWT-L1-0000-00DE2
Q4 100 116 171 218 XPEBWT-L1-0000-00CE2
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
5
XLAMP® XP-E2 LED
Notes:
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 39).
• Cree XLamp XP-E2 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
* Flux values @ 25°C are calculated and for reference only.
** Calculated ux values at 700mA and 1A are for reference only.
Chromaticity Minimum Luminous Flux @ 350mA
Calculated Minimum
Luminous Flux (lm)**
@ 85°C
Order Codes
Kit CCT Code Flux (lm)
@ 85°C
Flux (lm)
@ 25°C* 700mA 1.0A 70 CRI Typical 75 CRI Typical 80 CRI Minimum
E3 5000 K
R4 130 151 223 284 XPEBWT-01-0000-00GE3
R3 122 142 209 266 XPEBWT-01-0000-00FE3 XPEBWT-L1-0000-00FE3
R2 114 132 195 249 XPEBWT-01-0000-00EE3 XPEBWT-L1-0000-00EE3
Q5 107 124 183 233 XPEBWT-L1-0000-00DE3
Q4 100 116 171 218 XPEBWT-L1-0000-00CE3
F4 4750 K
R4 130 151 223 284 XPEBWT-01-0000-00GF4
R3 122 142 209 266 XPEBWT-01-0000-00FF4 XPEBWT-L1-0000-00FF4
R2 114 132 195 249 XPEBWT-01-0000-00EF4 XPEBWT-L1-0000-00EF4
Q5 107 124 183 233 XPEBWT-L1-0000-00DF4
Q4 100 116 171 218 XPEBWT-L1-0000-00CF4
E4 4500 K
R4 130 151 223 284 XPEBWT-01-0000-00GE4
R3 122 142 209 266 XPEBWT-01-0000-00FE4 XPEBWT-L1-0000-00FE4
R2 114 132 195 249 XPEBWT-01-0000-00EE4 XPEBWT-L1-0000-00EE4
Q5 107 124 183 233 XPEBWT-L1-0000-00DE4
Q4 100 116 171 218 XPEBWT-L1-0000-00CE4
F5 4250 K
R3 122 142 209 266 XPEBWT-01-0000-00FF5
R2 114 132 195 249 XPEBWT-01-0000-00EF5 XPEBWT-L1-0000-00EF5
Q5 107 124 183 233 XPEBWT-01-0000-00DF5 XPEBWT-L1-0000-00DF5
Q4 100 116 171 218 XPEBWT-L1-0000-00CF5
Q3 93.9 109 161 205 XPEBWT-L1-0000-00BF5
E5 4000 K
R3 122 142 209 266 XPEBWT-01-0000-00FE5
R2 114 132 195 249 XPEBWT-01-0000-00EE5 XPEBWT-L1-0000-00EE5 XPEBWT-H1-0000-00EE5
Q5 107 124 183 233 XPEBWT-01-0000-00DE5 XPEBWT-L1-0000-00DE5 XPEBWT-H1-0000-00DE5
Q4 100 116 171 218 XPEBWT-L1-0000-00CE5 XPEBWT-H1-0000-00CE5
Q3 93.9 109 161 205 XPEBWT-L1-0000-00BE5 XPEBWT-H1-0000-00BE5
Z5 4000 K
Q5 107 124 183 233 XPEBWT-L1-0000-00DZ5 XPEBWT-H1-0000-00DZ5
Q4 100 116 171 218 XPEBWT-L1-0000-00CZ5 XPEBWT-H1-0000-00CZ5
Q3 93.9 109 161 205 XPEBWT-L1-0000-00BZ5 XPEBWT-H1-0000-00BZ5
FLUX CHARACTERISTICS - WHITE (TJ=85°C) - CONTINUED
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
6
XLAMP® XP-E2 LED
Notes:
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 39).
• Cree XLamp XP-E2 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
* Flux values @ 25°C are calculated and for reference only.
** Calculated ux values at 700mA and 1A are for reference only.
Chromaticity Minimum Luminous
Flux @ 350mA
Calculated Minimum
Luminous Flux (lm)**
@ 85°C**
Order Codes
Kit CCT Code
Flux
(lm) @
85°C
Flux
(lm) @
25°C*
700mA 1.0A 70 CRI Typical 80 CRI Typical 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum
F6 3750 K
R3 122 142 209 266 XPEBWT-01-
0000-00FF6
R2 114 132 195 249 XPEBWT-01-
0000-00EF6
XPEBWT-L1-
0000-00EF6
Q5 107 124 183 233 XPEBWT-01-
0000-00DF6
XPEBWT-L1-
0000-00DF6
XPEBWT-H1-
0000-00DF6
Q4 100 116 171 218 XPEBWT-L1-
0000-00CF6
XPEBWT-H1-
0000-00CF6
Q3 93.9 109 161 205 XPEBWT-L1-
0000-00BF6
XPEBWT-H1-
0000-00BF6
Q2 87.4 102 150 191 XPEBWT-L1-
0000-00AF6
XPEBWT-H1-
0000-00AF6
E6 3500 K
R3 122 142 209 266 XPEBWT-01-
0000-00FE6
R2 114 132 195 249 XPEBWT-01-
0000-00EE6
XPEBWT-L1-
0000-00EE6
Q5 107 124 183 233 XPEBWT-01-
0000-00DE6
XPEBWT-L1-
0000-00DE6
XPEBWT-H1-
0000-00DE6
Q4 100 116 171 218 XPEBWT-L1-
0000-00CE6
XPEBWT-H1-
0000-00CE6
Q3 93.9 109 161 205 XPEBWT-L1-
0000-00BE6
XPEBWT-H1-
0000-00BE6
Q2 87.4 102 150 191 XPEBWT-L1-
0000-00AE6
XPEBWT-H1-
0000-00AE6
Z6 3500 K
Q5 107 124 183 233 XPEBWT-L1-
0000-00DZ6
Q4 100 116 171 218 XPEBWT-L1-
0000-00CZ6
XPEBWT-H1-
0000-00CZ6
Q3 93.9 109 161 205 XPEBWT-L1-
0000-00BZ6
XPEBWT-H1-
0000-00BZ6
Q2 87.4 102 150 191 XPEBWT-L1-
0000-00AZ6
XPEBWT-H1-
0000-00AZ6
F7 3250 K
R2 114 132 195 249 XPEBWT-01-
0000-00EF7
XPEBWT-L1-
0000-00EF7
Q5 107 124 183 233 XPEBWT-01-
0000-00DF7
XPEBWT-L1-
0000-00DF7
XPEBWT-H1-
0000-00DF7
Q4 100 116 171 218 XPEBWT-L1-
0000-00CF7
XPEBWT-H1-
0000-00CF7
Q3 93.9 109 161 205 XPEBWT-L1-
0000-00BF7
XPEBWT-H1-
0000-00BF7
Q2 87.4 102 150 191 XPEBWT-L1-
0000-00AF7
XPEBWT-H1-
0000-00AF7
FLUX CHARACTERISTICS - WHITE (TJ=85°C) - CONTINUED
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
7
XLAMP® XP-E2 LED
Notes:
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 39).
• Cree XLamp XP-E2 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
* Flux values @ 25°C are calculated and for reference only.
** Calculated ux values at 700mA and 1A are for reference only.
Chromaticity Minimum Luminous
Flux @ 350mA
Calculated Minimum
Luminous Flux (lm)**
@ 85°C**
Order Codes
Kit CCT Code
Flux
(lm) @
85°C
Flux
(lm) @
25°C*
700mA 1.0A 70 CRI Typical 80 CRI Typical 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum
E7 3000 K
R2 114 132 195 249 XPEBWT-01-
0000-00EE7
XPEBWT-L1-
0000-00EE7
Q5 107 124 183 233 XPEBWT-01-
0000-00DE7
XPEBWT-L1-
0000-00DE7
XPEBWT-H1-
0000-00DE7
Q4 100 116 171 218 XPEBWT-L1-
0000-00CE7
XPEBWT-H1-
0000-00CE7
Q3 93.9 109 161 205 XPEBWT-L1-
0000-00BE7
XPEBWT-H1-
0000-00BE7
Q2 87.4 102 150 191 XPEBWT-L1-
0000-00AE7
XPEBWT-H1-
0000-00AE7
XPEBWT-P1-
0000-00AE7
XPEBWT-U1-0000-
00AE7
P4 80.6 93.6 138 176 XPEBWT-P1-
0000-009E7
XPEBWT-U1-
0000-009E7
P3 73.9 85.8 127 161 XPEBWT-P1-
0000-008E7
XPEBWT-U1-
0000-008E7
P2 67.2 78.0 115 147 XPEBWT-P1-
0000-007E7
XPEBWT-U1-
0000-007E7
Z7 3000 K
Q5 107 124 183 233 XPEBWT-L1-
0000-00DZ7
Q4 100 116 171 218 XPEBWT-L1-
0000-00CZ7
XPEBWT-H1-
0000-00CZ7
Q3 93.9 109 161 205 XPEBWT-L1-
0000-00BZ7
XPEBWT-H1-
0000-00BZ7
Q2 87.4 102 150 191 XPEBWT-L1-
0000-00AZ7
XPEBWT-H1-
0000-00AZ7
XPEBWT-P1-
0000-00AZ7
P4 80.6 93.6 138 176 XPEBWT-P1-
0000-009Z7
XPEBWT-U1-
0000-009Z7
P3 73.9 85.8 127 161 XPEBWT-P1-
0000-008Z7
XPEBWT-U1-
0000-008Z7
P2 67.2 78.0 115 147 XPEBWT-P1-
0000-007Z7
XPEBWT-U1-
0000-007Z7
FLUX CHARACTERISTICS - WHITE (TJ=85°C) - CONTINUED
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
8
XLAMP® XP-E2 LED
Notes:
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 39).
• Cree XLamp XP-E2 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
* Flux values @ 25°C are calculated and for reference only.
** Calculated ux values at 700mA and 1A are for reference only.
Chromaticity Minimum Luminous
Flux @ 350mA
Calculated Minimum
Luminous Flux (lm)**
@ 85°C**
Order Codes
Kit CCT Code
Flux
(lm) @
85°C
Flux
(lm) @
25°C*
700mA 1.0A 70 CRI Typical 80 CRI Typical 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum
F8 2850 K
Q5 107 124 183 233 XPEBWT-L1-
0000-00DF8
Q4 100 116 171 218 XPEBWT-L1-
0000-00CF8
XPEBWT-H1-
0000-00CF8
Q3 93.9 109 161 205 XPEBWT-L1-
0000-00BF8
XPEBWT-H1-
0000-00BF8
Q2 87.4 102 150 191 XPEBWT-L1-
0000-00AF8
XPEBWT-H1-
0000-00AF8
XPEBWT-P1-
0000-00AF8
P4 80.6 93.6 138 176 XPEBWT-L1-
0000-009F8
XPEBWT-H1-
0000-009F8
XPEBWT-P1-
0000-009F8
XPEBWT-U1-
0000-009F8
P3 73.9 85.8 127 161 XPEBWT-P1-
0000-008F8
XPEBWT-U1-
0000-008F8
P2 67.2 78 115 147 XPEBWT-P1-
0000-007F8
XPEBWT-U1-
0000-007F8
N4 62 72 106 135 XPEBWT-P1-
0000-006F8
XPEBWT-U1-
0000-006F8
E8 2700 K
Q5 107 124 183 233 XPEBWT-L1-
0000-00DE8
Q4 100 116 171 218 XPEBWT-L1-
0000-00CE8
XPEBWT-H1-
0000-00CE8
Q3 93.9 109 161 205 XPEBWT-L1-
0000-00BE8
XPEBWT-H1-
0000-00BE8
Q2 87.4 102 150 191 XPEBWT-L1-
0000-00AE8
XPEBWT-H1-
0000-00AE8
P4 80.6 93.6 138 176 XPEBWT-L1-
0000-009E8
XPEBWT-H1-
0000-009E8
XPEBWT-P1-
0000-009E8
XPEBWT-U1-
0000-009E8
P3 73.9 85.8 127 161 XPEBWT-P1-
0000-008E8
XPEBWT-U1-
0000-008E8
P2 67.2 78 115 147 XPEBWT-P1-
0000-007E8
XPEBWT-U1-
0000-007E8
N4 62 72 106 135 XPEBWT-P1-
0000-006E8
XPEBWT-U1-
0000-006E8
FLUX CHARACTERISTICS - WHITE (TJ=85°C) - CONTINUED
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
9
XLAMP® XP-E2 LED
Notes:
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 39).
• Cree XLamp XP-E2 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
* Flux values @ 25°C are calculated and for reference only.
** Calculated ux values at 700mA and 1A are for reference only.
Chromaticity Minimum Luminous
Flux @ 350mA
Calculated Minimum
Luminous Flux (lm)**
@ 85°C**
Order Codes
Kit CCT Code
Flux
(lm) @
85°C
Flux
(lm) @
25°C*
700mA 1.0A 70 CRI Typical 80 CRI Typical 80 CRI Minimum 85 CRI Minimum 90 CRI Minimum
Z8 2700 K
Q4 100 116 171 218 XPEBWT-L1-
0000-00CZ8
Q3 93.9 109 161 205 XPEBWT-L1-
0000-00BZ8
XPEBWT-H1-
0000-00BZ8
Q2 87.4 102 150 191 XPEBWT-L1-
0000-00AZ8
XPEBWT-H1-
0000-00AZ8
P4 80.6 93.6 138 176 XPEBWT-L1-
0000-009Z8
XPEBWT-H1-
0000-009Z8
XPEBWT-P1-
0000-009Z8
P3 73.9 85.8 127 161 XPEBWT-P1-
0000-008Z8
XPEBWT-U1-
0000-008Z8
P2 67.2 78 115 147 XPEBWT-P1-
0000-007Z8
XPEBWT-U1-
0000-007Z8
N4 62 72 106 135 XPEBWT-P1-
0000-006Z8
XPEBWT-U1-
0000-006Z8
EA 2200 K
P3 73.9 85.8 127 161 XPEBWT-L1-
0000-008EA
XPEBWT-H1-
0000-008EA
P2 67.2 78 115 147 XPEBWT-L1-
0000-007EA
XPEBWT-H1-
0000-007EA
N4 62 72 106 135 XPEBWT-L1-
0000-006EA
XPEBWT-H1-
0000-006EA
ZA 2200 K
P3 73.9 85.8 127 161 XPEBWT-L1-
0000-008ZA
XPEBWT-H1-
0000-008ZA
P2 67.2 78 115 147 XPEBWT-L1-
0000-007ZA
XPEBWT-H1-
0000-007ZA
N4 62 72 106 135 XPEBWT-L1-
0000-006ZA
XPEBWT-H1-
0000-006ZA
FLUX CHARACTERISTICS - WHITE (TJ=85°C) - CONTINUED
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
10
XLAMP® XP-E2 LED
Note:
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 39).
• Cree XLamp XP-E2 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
* Calculated Photosynthetic Photon Flux (PPF) values are for reference only.
FLUX CHARACTERISTICS - COLOR (TJ = 25°C)
The following tables provide order codes for XLamp XP-E2 color LEDs. For a complete description of the order-code nomenclature, please
see the Bin and Order Code Formats section (page 37).
Color
Minimum Radiant Flux
@ 350mA Calculated
Minimum
PPF
(µmol/s)*
Dominant Wavelength (nm)
Order Codes
Minimum Maximum
Group Flux (mW) Group DWL
(nm) Group DWL
(nm)
Royal
Blue
30 450 1.71
D3 450 D5 465 XPEBRY-L1-0000-00J01
D3 450 D4 460 XPEBRY-L1-0000-00J02
D4 455 D5 465 XPEBRY-L1-0000-00J03
31 475 1.80
D3 450 D5 465 XPEBRY-L1-0000-00K01
D3 450 D4 460 XPEBRY-L1-0000-00K02
D4 455 D5 465 XPEBRY-L1-0000-00K03
32 500 1.90
D3 450 D5 465 XPEBRY-L1-0000-00L01
D3 450 D4 460 XPEBRY-L1-0000-00L02
D4 455 D5 465 XPEBRY-L1-0000-00L03
33 525 1.99
D3 450 D5 465 XPEBRY-L1-0000-00M01
D3 450 D4 460 XPEBRY-L1-0000-00M02
D4 455 D5 465 XPEBRY-L1-0000-00M03
34 550 2.08
D3 450 D5 465 XPEBRY-L1-0000-00N01
D3 450 D4 460 XPEBRY-L1-0000-00N02
D4 455 D5 465 XPEBRY-L1-0000-00N03
35 575 2.18
D3 450 D5 465 XPEBRY-L1-0000-00P01
D3 450 D4 460 XPEBRY-L1-0000-00P02
D4 455 D5 465 XPEBRY-L1-0000-00P03
36 600 2.27
D3 450 D5 465 XPEBRY-L1-0000-00Q01
D3 450 D4 460 XPEBRY-L1-0000-00Q02
D4 455 D5 465 XPEBRY-L1-0000-00Q03
37 625 2.37
D3 450 D5 465 XPEBRY-L1-0000-00R01
D3 450 D4 460 XPEBRY-L1-0000-00R02
38 650 2.46
D3 450 D5 465 XPEBRY-L1-0000-00S01
D3 450 D4 460 XPEBRY-L1-0000-00S02
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
11
XLAMP® XP-E2 LED
Note:
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 39).
• Cree XLamp XP-E2 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
Color
Minimum Luminous
Flux (lm) @ 350mA
Dominant Wavelength (nm)
Order Codes
Minimum Maximum
Group Flux (lm) Group DWL
(nm) Group DWL
(nm)
Blue
K2 30.6
B3 465 B6 485 XPEBBL-L1-0000-00Y01
B3 465 B5 480 XPEBBL-L1-0000-00Y02
B4 470 B5 480 XPEBBL-L1-0000-00Y05
K3 35.2
B3 465 B6 485 XPEBBL-L1-0000-00Z01
B3 465 B5 480 XPEBBL-L1-0000-00Z02
B4 470 B5 480 XPEBBL-L1-0000-00Z05
M2 39.8
B3 465 B6 485 XPEBBL-L1-0000-00201
B3 465 B5 480 XPEBBL-L1-0000-00202
B4 470 B5 480 XPEBBL-L1-0000-00205
M3 45.7
B3 465 B6 485 XPEBBL-L1-0000-00301
B3 465 B5 480 XPEBBL-L1-0000-00302
B4 470 B5 480 XPEBBL-L1-0000-00305
FLUX CHARACTERISTICS - COLOR (TJ = 25°C) - CONTINUED
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
12
XLAMP® XP-E2 LED
Note:
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 39).
• Cree XLamp XP-E2 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
* Calculated Photosynthetic Photon Flux (PPF) values are for reference only.
Color
Minimum Luminous
Flux (lm) @ 350mA Calculated
Minimum
PPF
(µmol/s)*
Dominant Wavelength (nm)
Order Codes
Minimum Maximum
Group Flux (lm) Group DWL
(nm) Group DWL
(nm)
Green
Q2 87.4 0.80
G2 520 G4 535 XPEBGR-L1-0000-00A01
G2 520 G3 530 XPEBGR-L1-0000-00A02
G3 525 G4 535 XPEBGR-L1-0000-00A03
Q3 93.9 0.86
G2 520 G4 535 XPEBGR-L1-0000-00B01
G2 520 G3 530 XPEBGR-L1-0000-00B02
G3 525 G4 535 XPEBGR-L1-0000-00B03
Q4 100 0.91
G2 520 G4 535 XPEBGR-L1-0000-00C01
G2 520 G3 530 XPEBGR-L1-0000-00C02
G3 525 G4 535 XPEBGR-L1-0000-00C03
Q5 107 0.98
G2 520 G4 535 XPEBGR-L1-0000-00D01
G2 520 G3 530 XPEBGR-L1-0000-00D02
G3 525 G4 535 XPEBGR-L1-0000-00D03
R2 114 1.04
G2 520 G4 535 XPEBGR-L1-0000-00E01
G2 520 G3 530 XPEBGR-L1-0000-00E02
G3 525 G4 535 XPEBGR-L1-0000-00E03
R3 122 1.11
G2 520 G4 535 XPEBGR-L1-0000-00F01
G2 520 G3 530 XPEBGR-L1-0000-00F02
G3 525 G4 535 XPEBGR-L1-0000-00F03
R4 130 1.18
G2 520 G4 535 XPEBGR-L1-0000-00G01
G2 520 G3 530 XPEBGR-L1-0000-00G02
G3 525 G4 535 XPEBGR-L1-0000-00G03
Color Color Bin
Minimum Luminous Flux
(lm) @ 350mA Order Codes
Group Flux (lm)
PC Amber Y2
Q2 87.4 XPEBPA-L1-0000-00A01
Q3 93.9 XPEBPA-L1-0000-00B01
Q4 100 XPEBPA-L1-0000-00C01
Q5 107 XPEBPA-L1-0000-00D01
FLUX CHARACTERISTICS - COLOR (TJ = 25°C) - CONTINUED
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
13
XLAMP® XP-E2 LED
Note:
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 39).
• Cree XLamp XP-E2 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
Color
Minimum Luminous
Flux (lm) @ 350mA
Dominant Wavelength (nm)
Order Codes
Minimum Maximum
Group Flux (lm) Group DWL
(nm) Group DWL
(nm)
Amber
N4 62.0
A2 585 A3 595 XPEBAM-L1-0000-00601
A2 585 A2 590 XPEBAM-L1-0000-00602
A3 590 A3 595 XPEBAM-L1-0000-00603
P2 67.2
A2 585 A3 595 XPEBAM-L1-0000-00701
A2 585 A2 590 XPEBAM-L1-0000-00702
A3 590 A3 595 XPEBAM-L1-0000-00703
P3 73.9
A2 585 A3 595 XPEBAM-L1-0000-00801
A2 585 A2 590 XPEBAM-L1-0000-00802
A3 590 A3 595 XPEBAM-L1-0000-00803
P4 80.6
A2 585 A3 595 XPEBAM-L1-0000-00901
A2 585 A2 590 XPEBAM-L1-0000-00902
A3 590 A3 595 XPEBAM-L1-0000-00903
Q2 87.4 A2 585 A3 595 XPEBAM-L1-0000-00A01
FLUX CHARACTERISTICS - COLOR (TJ = 25°C) - CONTINUED
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
14
XLAMP® XP-E2 LED
Note:
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 39).
• Cree XLamp XP-E2 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
* Calculated Photosynthetic Photon Flux (PPF) values are for reference only.
Color
Minimum Luminous
Flux (lm) @ 350mA
Dominant Wavelength (nm)
Order Codes
Minimum Maximum
Group Flux (lm) Group DWL
(nm) Group DWL
(nm)
Red-
Orange
P2 67.2
O3 610 O4 620 XPEBRO-L1-0000-00701
O3 610 O3 615 XPEBRO-L1-0000-00702
O4 615 O4 620 XPEBRO-L1-0000-00703
P3 73.9
O3 610 O4 620 XPEBRO-L1-0000-00801
O3 610 O3 615 XPEBRO-L1-0000-00802
O4 615 O4 620 XPEBRO-L1-0000-00803
P4 80.6
O3 610 O4 620 XPEBRO-L1-0000-00901
O3 610 O3 615 XPEBRO-L1-0000-00902
O4 615 O4 620 XPEBRO-L1-0000-00903
Q2 87.4
O3 610 O4 620 XPEBRO-L1-0000-00A01
O3 610 O3 615 XPEBRO-L1-0000-00A02
O4 615 O4 620 XPEBRO-L1-0000-00A03
Q3 93.9
O3 610 O4 620 XPEBRO-L1-0000-00B01
O3 610 O3 615 XPEBRO-L1-0000-00B02
O3 615 O4 620 XPEBRO-L1-0000-00B03
Q4 100 O3 610 O4 620 XPEBRO-L1-0000-00C01
O3 610 O3 615 XPEBRO-L1-0000-00C02
Q5 107 O3 610 O4 620 XPEBRO-L1-0000-00D01
O3 610 O3 615 XPEBRO-L1-0000-00D02
Color
Minimum Luminous
Flux (lm) @ 350mA Calculated
Minimum
PPF
(µmol/s)*
Dominant Wavelength (nm)
Order Codes
Minimum Maximum
Group Flux (lm) Group DWL
(nm) Group DWL
(nm)
Red
N3 56.8 1.48 R2 620 R3 630 XPEBRD-L1-0000-00501
R2 620 R2 625 XPEBRD-L1-0000-00502
N4 62 1.61 R2 620 R3 630 XPEBRD-L1-0000-00601
R2 620 R2 625 XPEBRD-L1-0000-00602
P2 67.2 1.75 R2 620 R3 630 XPEBRD-L1-0000-00701
R2 620 R2 625 XPEBRD-L1-0000-00702
P3 73.9 1.92 R2 620 R3 630 XPEBRD-L1-0000-00801
R2 620 R2 625 XPEBRD-L1-0000-00802
P4 80.6 2.10 R2 620 R3 630 XPEBRD-L1-0000-00901
R2 620 R2 625 XPEBRD-L1-0000-00902
FLUX CHARACTERISTICS - COLOR (TJ = 25°C) - CONTINUED
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
15
XLAMP® XP-E2 LED
Note:
• Cree maintains a tolerance of ±7% on ux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on CRI measurements.
See the Measurements section (page 39).
• Cree XLamp XP-E2 LED order codes specify only a minimum ux bin and not a maximum. Cree may ship reels in ux bins higher than the minimum
specied by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specied by the order code.
FLUX CHARACTERISTICS - COLOR (TJ = 25°C) - CONTINUED
Minimum Radiant
Flux (mW)@ 350mA
Peak Wavelength (nm)
Color Order CodesMinimum Maximum
Group Flux (mW) Group PWL (nm) Group PWL (nm)
Photo Red 29 425 P2 650 P5 670 XPEBPR-L1-0000-00C01
30 450 P2 650 P5 670 XPEBPR-L1-0000-00D01
Color
Minimum Radiant
Flux (mW)@ 350mA
Peak Wavelength (nm)
Order CodesMinimum Maximum
Group Flux (mW) Group PWL (nm) Group PWL (nm)
Far Red
23 275 F2 720 F5 740 XPEBFR-L1-0000-00601
24 300 F2 720 F5 740 XPEBFR-L1-0000-00701
25 325 F2 720 F5 740 XPEBFR-L1-0000-00801
26 350 F2 720 F5 740 XPEBFR-L1-0000-00901
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
16
XLAMP® XP-E2 LED
RELATIVE SPECTRAL POWER DISTRIBUTION
Relative Spectral Power
0
10
20
30
40
50
60
70
80
90
100
380 430 480 530 580 630 680 730 780
Relative Radiant Power (%)
Wavelength (nm)
Cool White
Warm White
Relative Spectral Power
0
20
40
60
80
100
380 430 480 530 580 630 680 730 780
Relative Radiant Power (%)
Wavelength (nm)
Royal Blue
Blue
Green
PC Amber
Amber
Red-Orange
Red
Photo Red
Far Red
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
17
XLAMP® XP-E2 LED
RELATIVE FLUX VS. JUNCTION TEMPERATURE (IF = 350mA)
Relative Flux Output vs. Junction Temperature
0
20
40
60
80
100
120
25 50 75 100 125 150
Relative Luminous Flux (%)
Junction Temperature (ºC)
White
Relative Flux Output vs. Junction Temperature
0
10
20
30
40
50
60
70
80
90
100
25 50 75 100 125 150
Relative Radient Flux (%)
Junction Temperature (ºC)
Royal Blue
Photo Red
Far Red
Relative Flux Output vs. Junction Temperature
0
10
20
30
40
50
60
70
80
90
100
25 50 75 100 125 150
Relative Luminous Flux (%)
Junction Temperature (ºC)
Blue
Green
PC Amber
Amber
Red-Orange, Red
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
18
XLAMP® XP-E2 LED
ELECTRICAL CHARACTERISTICS - WHITE (TJ = 85°C)
ELECTRICAL CHARACTERISTICS - COLOR (TJ = 25°C)
Electrical Characteristics (Tj = 25ºC)
0
100
200
300
400
500
600
700
800
900
1000
2.7 2.8 2.9 3.0 3.1 3.2
Forward Current (mA)
Forward Voltage (V)
White
Electrical Characteristics (Tj = 85ºC)
no far red point at 300 mA, per RE XPEB EPR FAR Timeline.msg
0
100
200
300
400
500
600
700
800
900
1000
1.65 1.90 2.15 2.40 2.65 2.90 3.15 3.40 3.65
Forward Current (mA)
Forward Voltage (V)
Royal Blue, Blue
Green
PC Amber
Amber, Red-Orange, Red
Photo Red
Far Red
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
19
XLAMP® XP-E2 LED
RELATIVE FLUX VS. CURRENT - WHITE (TJ = 85°C)
RELATIVE FLUX VS. CURRENT - COLOR (TJ = 25°C)
Relative Intensity vs. Current (Tj = 85ºC)
0
50
100
150
200
250
0 100 200 300 400 500 600 700 800 900 1000
Relative Luminous Flux (%)
Forward Current (mA)
White
Relative Intensity vs. Current (Tj = 25ºC)
0
50
100
150
200
250
300
0100 200 300 400 500 600 700 800 900 1000
Relative Radiant Flux (%)
Forward Current (mA)
Royal Blue
Photo Red
Far Red
Relative Intensity vs. Current (Tj = 25ºC)
0
50
100
150
200
250
300
0100 200 300 400 500 600 700 800 900 1000
Relative Luminous Flux (%)
Forward Current (mA)
Blue
Green
PC Amber
Amber
Red-Orange, Red
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
20
XLAMP® XP-E2 LED
RELATIVE CHROMATICITY VS. CURRENT AND TEMPERATURE - WARM WHITE*
* Warm White XLamp XP-E2 LEDs have a typical CRI of 80.
Relative Chromaticity Vs. Current, WW
-0.020
-0.015
-0.010
-0.005
0.000
0.005
0.010
0.015
0.020
0 100 200 300 400 500 600 700 800 900 1000
Current (mA)
ΔCCx
ΔCCy
TJ = 85 °C
Relative Chromaticity Vs. Temperature WW
-0.020
-0.015
-0.010
-0.005
0.000
0.005
0.010
0.015
0.020
0 25 50 75 100 125 150
Tsp (°C)
ΔCCx
ΔCCy
IF = 350 mA
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
21
XLAMP® XP-E2 LED
TYPICAL SPATIAL DISTRIBUTION
Typical Spatial Radiation Pattern
0
20
40
60
80
100
-90 -70 -50 -30 -10 10 30 50 70 90
Relative Luminous Intensity (%)
Angle (°)
White
Typical Spatial Radiation Pattern
0
20
40
60
80
100
-90 -70 -50 -30 -10 10 30 50 70 90
Relative Luminous Intensity (%)
Angle (º)
Royal Blue, Blue, Green
PC Amber
Amber, Red-Orange, Red
Photo Red
Far Red
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
22
XLAMP® XP-E2 LED
THERMAL DESIGN
The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end
product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life
and optical characteristics.
White Royal Blue, Blue
Green PC Amber
Amber Red-Orange, Red
0
200
400
600
800
1000
1200
0 20 40 60 80 100 120 140
160
Maximum Current (mA)
Ambient Temperature (ºC)
Rj-a = 10°C/W
Rj-a = 15°C/W
Rj-a = 20°C/W
Rj-a = 25°C/W
Thermal Design - royal blue - same as blue
0
200
400
600
800
1000
1200
020 40 60 80 100 120 140 160
Maximum Current (mA)
Ambient Temperature (ºC)
Rj-a = 10°C/W
Rj-a = 15°C/W
Rj-a = 20°C/W
Rj-a = 25°C/W
Thermal Design - PC amber
0
200
400
600
800
1000
1200
020 40 60 80 100 120 140 160
Maximum Current (mA)
Ambient Temperature (ºC)
Rj-a = 10°C/W
Rj-a = 15°C/W
Rj-a = 20°C/W
Rj-a = 25°C/W
Thermal Design - green
0
200
400
600
800
1000
1200
020 40 60 80 100 120 140 160
Maximum Current (mA)
Ambient Temperature (ºC)
Rj-a = 20°C/W
Rj-a = 25°C/W
Rj-a = 30°C/W
Rj-a = 35°C/W
Thermal Design - red-orange, red
0
200
400
600
800
1000
1200
020 40 60 80 100 120 140
160
Maximum Current (mA)
Ambient Temperature (ºC)
Rj-a = 10°C/W
Rj-a = 15°C/W
Rj-a = 20°C/W
Rj-a = 25°C/W
Thermal Design - amber
0
200
400
600
800
1000
1200
020 40 60 80 100 120 140 160
Maximum Current (mA)
Ambient Temperature (ºC)
Rj-a = 10°C/W
Rj-a = 15°C/W
Rj-a = 20°C/W
Rj-a = 25°C/W
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
23
XLAMP® XP-E2 LED
THERMAL DESIGN - CONTINUED
Photo Red Far Red
Thermal Design - photo red
0
200
400
600
800
1000
1200
020 40 60 80 100 120 140 160
Maximum Current (mA)
Ambient Temperature (ºC)
Rj-a = 10°C/W
Rj-a = 15°C/W
Rj-a = 20°C/W
Rj-a = 25°C/W
Thermal Design - far red
0
200
400
600
800
1000
1200
020 40 60 80 100 120 140 160
Maximum Current (mA)
Ambient Temperature (ºC)
Rj-a = 10°C/W
Rj-a = 15°C/W
Rj-a = 20°C/W
Rj-a = 25°C/W
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
24
XLAMP® XP-E2 LED
PERFORMANCE GROUPS - LUMINOUS FLUX
XLamp XP-E2 LEDs (except royal blue, photo red and far red) are tested for luminous ux and placed into one of the following luminous-ux
groups:
Group Code Minimum Luminous Flux
(lm) @ 350mA
Maximum Luminous Flux
(lm) @ 350mA
K2 30.6 35.2
K3 35.2 39.8
M2 39.8 45.7
M3 45.7 51.7
N2 51.7 56.8
N3 56.8 62.0
N4 62.0 67.2
P2 67.2 73.9
P3 73.9 80.6
P4 80.6 87.4
Q2 87.4 93.9
Q3 93.9 100
Q4 100 107
Q5 107 114
R2 114 122
R3 122 130
R4 130 139
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
25
XLAMP® XP-E2 LED
PERFORMANCE GROUPS - RADIANT FLUX (TJ=25°C)
XLamp XP-E2 royal blue and photo red LEDs are tested for radiant ux and placed into one the following bins:
Group Minimum Radiant Flux
(mW) @ 350mA
Maximum Radiant Flux
(mW) @ 350mA
29 425 450
30 450 475
31 475 500
32 500 525
33 525 550
34 550 575
35 575 600
36 600 625
37 625 650
38 650 675
39 675 700
XLamp XP-E2 far red LEDs are tested for radiant ux and sorted into one of the following radiant-ux bins:
Group Minimum Radiant Flux
(mW) @ 350mA
Maximum Radiant Flux
(mW) @ 350mA
23 275 300
24 300 325
25 325 350
26 350 375
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
26
XLAMP® XP-E2 LED
PERFORMANCE GROUPS - CHROMATICITY
White XLamp XP-E2 LEDs are tested for chromaticity and placed into one of the regions dened by the bounding coordinates on the
following pages.
Region x y Region x y Region x y Region x y
0A
0.2950 0.2970
0B
0.2920 0.3060
0C
0.2984 0.3133
0D
0.2984 0.3133
0.2920 0.3060 0.2895 0.3135 0.2962 0.3220 0.3048 0.3207
0.2984 0.3133 0.2962 0.3220 0.3028 0.3304 0.3068 0.3113
0.3009 0.3042 0.2984 0.3133 0.3048 0.3207 0.3009 0.3042
0R
0.2980 0.2880
0S
0.2895 0.3135
0T
0.2962 0.3220
0U
0.3037 0.2937
0.2950 0.2970 0.2870 0.3210 0.2937 0.3312 0.3009 0.3042
0.3009 0.3042 0.2937 0.3312 0.3005 0.3415 0.3068 0.3113
0.3037 0.2937 0.2962 0.3220 0.3028 0.3304 0.3093 0.2993
1A
0.3048 0.3207
1B
0.3028 0.3304
1C
0.3115 0.3391
1D
0.3130 0.3290
0.3130 0.3290 0.3115 0.3391 0.3205 0.3481 0.3213 0.3373
0.3144 0.3186 0.3130 0.3290 0.3213 0.3373 0.3221 0.3261
0.3068 0.3113 0.3048 0.3207 0.3130 0.3290 0.3144 0.3186
1R
0.3068 0.3113
1S
0.3005 0.3415
1T
0.3099 0.3509
1U
0.3144 0.3186
0.3144 0.3186 0.3099 0.3509 0.3196 0.3602 0.3221 0.3261
0.3161 0.3059 0.3115 0.3391 0.3205 0.3481 0.3231 0.3120
0.3093 0.2993 0.3028 0.3304 0.3115 0.3391 0.3161 0.3059
2A
0.3215 0.3350
2B
0.3207 0.3462
2C
0.3290 0.3538
2D
0.3290 0.3417
0.3290 0.3417 0.3290 0.3538 0.3376 0.3616 0.3371 0.3490
0.3290 0.3300 0.3290 0.3417 0.3371 0.3490 0.3366 0.3369
0.3222 0.3243 0.3215 0.3350 0.3290 0.3417 0.3290 0.3300
2R
0.3222 0.3243
2S
0.3196 0.3602
2T
0.3290 0.3690
2U
0.3290 0.3300
0.3290 0.3300 0.3290 0.3690 0.3381 0.3762 0.3366 0.3369
0.3290 0.3180 0.3290 0.3538 0.3376 0.3616 0.3361 0.3245
0.3231 0.3120 0.3207 0.3462 0.3290 0.3538 0.3290 0.3180
3A
0.3371 0.3490
3B
0.3376 0.3616
3C
0.3463 0.3687
3D
0.3451 0.3554
0.3451 0.3554 0.3463 0.3687 0.3551 0.3760 0.3533 0.3620
0.3440 0.3427 0.3451 0.3554 0.3533 0.3620 0.3515 0.3487
0.3366 0.3369 0.3371 0.3490 0.3451 0.3554 0.3440 0.3427
3R
0.3366 0.3369
3S
0.3381 0.3762
0.3440 0.3428 0.3480 0.3840
0.3429 0.3307 0.3463 0.3687
0.3361 0.3245 0.3376 0.3616
4A
0.3530 0.3597
4B
0.3548 0.3736
4C
0.3641 0.3804
4D
0.3615 0.3659
0.3615 0.3659 0.3641 0.3804 0.3736 0.3874 0.3702 0.3722
0.3590 0.3521 0.3615 0.3659 0.3702 0.3722 0.3670 0.3578
0.3512 0.3465 0.3530 0.3597 0.3615 0.3659 0.3590 0.3521
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
27
XLAMP® XP-E2 LED
Region x y Region x y Region x y Region x y
5A1
0.3670 0.3578
5A2
0.3686 0.3649
5A3
0.3744 0.3685
5A4
0.3726 0.3612
0.3686 0.3649 0.3702 0.3722 0.3763 0.3760 0.3744 0.3685
0.3744 0.3685 0.3763 0.3760 0.3825 0.3798 0.3804 0.3721
0.3726 0.3612 0.3744 0.3685 0.3804 0.3721 0.3783 0.3646
5B1
0.3702 0.3722
5B2
0.3719 0.3797
5B3
0.3782 0.3837
5B4
0.3763 0.3760
0.3719 0.3797 0.3736 0.3874 0.3802 0.3916 0.3782 0.3837
0.3782 0.3837 0.3802 0.3916 0.3869 0.3958 0.3847 0.3877
0.3763 0.3760 0.3782 0.3837 0.3847 0.3877 0.3825 0.3798
5C1
0.3825 0.3798
5C2
0.3847 0.3877
5C3
0.3912 0.3917
5C4
0.3887 0.3836
0.3847 0.3877 0.3869 0.3958 0.3937 0.4001 0.3912 0.3917
0.3912 0.3917 0.3937 0.4001 0.4006 0.4044 0.3978 0.3958
0.3887 0.3836 0.3912 0.3917 0.3978 0.3958 0.3950 0.3875
5D1
0.3783 0.3646
5D2
0.3804 0.3721
5D3
0.3863 0.3758
5D4
0.3840 0.3681
0.3804 0.3721 0.3825 0.3798 0.3887 0.3836 0.3863 0.3758
0.3863 0.3758 0.3887 0.3836 0.3950 0.3875 0.3924 0.3794
0.3840 0.3681 0.3863 0.3758 0.3924 0.3794 0.3898 0.3716
6A1
0.3889 0.3690
6A2
0.3915 0.3768
6A3
0.3981 0.3800
6A4
0.3953 0.3720
0.3915 0.3768 0.3941 0.3848 0.4010 0.3882 0.3981 0.3800
0.3981 0.3800 0.4010 0.3882 0.4080 0.3916 0.4048 0.3832
0.3953 0.3720 0.3981 0.3800 0.4048 0.3832 0.4017 0.3751
6B1
0.3941 0.3848
6B2
0.3968 0.3930
6B3
0.4040 0.3966
6B4
0.4010 0.3882
0.3968 0.3930 0.3996 0.4015 0.4071 0.4052 0.4040 0.3966
0.4040 0.3966 0.4071 0.4052 0.4146 0.4089 0.4113 0.4001
0.4010 0.3882 0.4040 0.3966 0.4113 0.4001 0.4080 0.3916
6C1
0.4080 0.3916
6C2
0.4113 0.4001
6C3
0.4186 0.4037
6C4
0.4150 0.3950
0.4113 0.4001 0.4146 0.4089 0.4222 0.4127 0.4186 0.4037
0.4186 0.4037 0.4222 0.4127 0.4299 0.4165 0.4259 0.4073
0.4150 0.3950 0.4186 0.4037 0.4259 0.4073 0.4221 0.3984
6D1
0.4017 0.3751
6D2
0.4048 0.3832
6D3
0.4116 0.3865
6D4
0.4082 0.3782
0.4048 0.3832 0.4080 0.3916 0.4150 0.3950 0.4116 0.3865
0.4116 0.3865 0.4150 0.3950 0.4221 0.3984 0.4183 0.3898
0.4082 0.3782 0.4116 0.3865 0.4183 0.3898 0.4147 0.3814
7A1
0.4147 0.3814
7A2
0.4183 0.3898
7A3
0.4242 0.3919
7A4
0.4203 0.3833
0.4183 0.3898 0.4221 0.3984 0.4281 0.4006 0.4242 0.3919
0.4242 0.3919 0.4281 0.4006 0.4342 0.4028 0.4300 0.3939
0.4203 0.3833 0.4242 0.3919 0.4300 0.3939 0.4259 0.3853
7B1
0.4221 0.3984
7B2
0.4259 0.4073
7B3
0.4322 0.4096
7B4
0.4281 0.4006
0.4259 0.4073 0.4299 0.4165 0.4364 0.4188 0.4322 0.4096
0.4322 0.4096 0.4364 0.4188 0.4430 0.4212 0.4385 0.4119
0.4281 0.4006 0.4322 0.4096 0.4385 0.4119 0.4342 0.4028
PERFORMANCE GROUPS - CHROMATICITY (CONTINUED)
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
28
XLAMP® XP-E2 LED
Region x y Region x y Region x y Region x y
7C1
0.4342 0.4028
7C2
0.4385 0.4119
7C3
0.4449 0.4141
7C4
0.4403 0.4049
0.4385 0.4119 0.4430 0.4212 0.4496 0.4236 0.4449 0.4141
0.4449 0.4141 0.4496 0.4236 0.4562 0.4260 0.4513 0.4164
0.4403 0.4049 0.4449 0.4141 0.4513 0.4164 0.4465 0.4071
7D1
0.4259 0.3853
7D2
0.4300 0.3939
7D3
0.4359 0.3960
7D4
0.4316 0.3873
0.4300 0.3939 0.4342 0.4028 0.4403 0.4049 0.4359 0.3960
0.4359 0.3960 0.4403 0.4049 0.4465 0.4071 0.4418 0.3981
0.4316 0.3873 0.4359 0.3960 0.4418 0.3981 0.4373 0.3893
8A1
0.4373 0.3893
8A2
0.4418 0.3981
8A3
0.4475 0.3994
8A4
0.4428 0.3906
0.4418 0.3981 0.4465 0.4071 0.4523 0.4085 0.4475 0.3994
0.4475 0.3994 0.4523 0.4085 0.4582 0.4099 0.4532 0.4008
0.4428 0.3906 0.4475 0.3994 0.4532 0.4008 0.4483 0.3919
8B1
0.4465 0.4071
8B2
0.4513 0.4164
8B3
0.4573 0.4178
8B4
0.4523 0.4085
0.4513 0.4164 0.4562 0.4260 0.4624 0.4274 0.4573 0.4178
0.4573 0.4178 0.4624 0.4274 0.4687 0.4289 0.4634 0.4193
0.4523 0.4085 0.4573 0.4178 0.4634 0.4193 0.4582 0.4099
8C1
0.4582 0.4099
8C2
0.4634 0.4193
8C3
0.4695 0.4207
8C4
0.4641 0.4112
0.4634 0.4193 0.4687 0.4289 0.4750 0.4304 0.4695 0.4207
0.4695 0.4207 0.4750 0.4304 0.4813 0.4319 0.4756 0.4221
0.4641 0.4112 0.4695 0.4207 0.4756 0.4221 0.4700 0.4126
8D1
0.4483 0.3919
8D2
0.4532 0.4008
8D3
0.4589 0.4021
8D4
0.4538 0.3931
0.4532 0.4008 0.4582 0.4099 0.4641 0.4112 0.4589 0.4021
0.4589 0.4021 0.4641 0.4112 0.4700 0.4126 0.4646 0.4034
0.4538 0.3931 0.4589 0.4021 0.4646 0.4034 0.4593 0.3944
AA1
0.4822 0.3973
AA2
0.4884 0.4067
AA3
0.4942 0.4066
AA4
0.4879 0.3972
0.4884 0.4067 0.4946 0.4162 0.5006 0.4160 0.4942 0.4066
0.4942 0.4066 0.5006 0.4160 0.5066 0.4158 0.5001 0.4064
0.4879 0.3972 0.4942 0.4066 0.5001 0.4064 0.4936 0.3970
AB1
0.4946 0.4162
AB2
0.5008 0.4256
AB3
0.5069 0.4254
AB4
0.5006 0.4160
0.5008 0.4256 0.5070 0.4350 0.5133 0.4348 0.5069 0.4254
0.5069 0.4254 0.5133 0.4348 0.5196 0.4346 0.5131 0.4252
0.5006 0.4160 0.5069 0.4254 0.5131 0.4252 0.5066 0.4158
AC1
0.5066 0.4158
AC2
0.5131 0.4252
AC3
0.5192 0.4250
AC4
0.5126 0.4156
0.5131 0.4252 0.5196 0.4346 0.5258 0.4343 0.5192 0.4250
0.5192 0.4250 0.5258 0.4343 0.5321 0.4341 0.5253 0.4248
0.5126 0.4156 0.5192 0.4250 0.5253 0.4248 0.5186 0.4154
AD1
0.4936 0.3970
AD2
0.5001 0.4064
AD3
0.5059 0.4062
AD4
0.4993 0.3969
0.5001 0.4064 0.5066 0.4158 0.5126 0.4156 0.5059 0.4062
0.5059 0.4062 0.5126 0.4156 0.5186 0.4154 0.5118 0.4061
0.4993 0.3969 0.5059 0.4062 0.5118 0.4061 0.5050 0.3967
PERFORMANCE GROUPS - CHROMATICITY (CONTINUED)
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
29
XLAMP® XP-E2 LED
PERFORMANCE GROUPS - CHROMATICITY (CONTINUED)
XLamp XP-E2 PC amber LEDs are placed into the region dened by the following bounding coordinates.
Region x y
Y2
0.5469 0.4249
0.5700 0.4100
0.5900 0.4100
0.5610 0.4390
PERFORMANCE GROUPS - DOMINANT WAVELENGTH
Color XLamp XP-E2 LEDs are tested for dominant wavelength (DWL) and sorted into one of the DWL bins dened below.
Color DWL Group Minimum DWL (nm)
@ 350mA
Maximum DWL (nm)
@ 350mA
Royal Blue
D3 450 455
D4 455 460
D5 460 465
Blue
B3 465 470
B4 470 475
B5 475 480
B6 480 485
Green
G2 520 525
G3 525 530
G4 530 535
Amber A2 585 590
A3 590 595
Red-Orange O3 610 615
O4 615 620
Red
R2 620 625
R3 625 630
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
30
XLAMP® XP-E2 LED
PERFORMANCE GROUPS - PEAK WAVELENGTH
Photo red and far red XLamp XP-E2 LEDs are tested for peak wavelength (PWL) and sorted into one of the PWL bins dened below.
Color PWL Group Minimum PWL (nm)
@ 350mA
Maximum PWL (nm)
@ 350mA
Photo Red
P2 650 655
P3 655 660
P4 660 665
P5 665 670
Far Red
F2 720 725
F3 725 730
F4 730 735
F5 735 740
PERFORMANCE GROUPS - FORWARD VOLTAGE
Amber, red-orange, red, photo red and far red XLamp XP-E2 LEDs are tested for forward voltage and sorted into one of the forward voltage
bins dened below.
Forward Voltage
Group
Minimum Forward Voltage
(V) @ 350mA
Maximum Forward Voltage
(V) @ 350mA
A 1.5 1.75
B 1.75 2.0
C 2.0 2.25
D 2.25 2.5
E 2.5 2.75
F 2.75 3.0
G3.0 3.25
H 3.25 3.5
J 3.5 3.75
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
31
XLAMP® XP-E2 LED
CREE’S STANDARD CHROMATICITY REGIONS PLOTTED ON THE 1931 CIE CURVE
ANSI Cool White
ANSI Neutral White and ANSI Warm White
5000 K
5700 K
6500 K
8000 K
0A
0B
0C
0D
0R
0S
0T
0U
1A
1B
1C
1D
2A
2B
2C
2D
3A
3B
1R
1S
1T
1U
2R
2S
2T
2U
3R
3S
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCy
CCx
ANSI
C78.377A
2700 K
3000 K
3500 K
4000 K
4500 K
5000 K
3A
3B
3C
3D
4A
4B
4C
4D 5A1
5A2
5A3
5A4
5B1
5B2
5B3
5B4
5C1
5C2
5C3
5C4
5D1
5D2
5D3
5D46A1
6A2
6A3
6A4
6B1
6B2
6B3
6B4
6C1
6C2
6C3
6C4
6D1
6D2
6D3
6D4
7A1
7A2 7A3
7A4
7B1
7B2 7B3
7B4 7C1
7C2 7C3
7C4
7D1
7D2 7D3
7D48A1
8A2 8A3
8A4
8B1
8B2 8B3
8B4 8C1
8C2 8C3
8C4
8D1
8D28D3
8D4
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
CCy
CCx
ANSI
C78.377A
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
32
XLAMP® XP-E2 LED
CREE’S STANDARD COOL WHITE KITS PLOTTED ON ANSI STANDARD CHROMATICITY REGIONS
5000 K
5700 K
6500 K
8000 K
0A
0B
0C
0D
0R
0S
0T
0U
1A
1B
1C
1D
2A
2B
2C
2D
3A
3B
1R
1S
1T
1U
2R
2S
2T
2U
3R
3S
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCy
CCx
ANSI
C78.377A
51
5000 K
5700 K
6500 K
8000 K
0A
0B
0C
0D
0R
0S
0T
0U
1A
1B
1C
1D
2A
2B
2C
2D
3A
3B
1R
1S
1T
1U
2R
2S
2T
2U
3R
3S
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCy
CCx
ANSI
C78.377A
53
5000 K
5700 K
6500 K
8000 K
0A
0B
0C
0D
0R
0S
0T
0U
1A
1B
1C
1D
2A
2B
2C
2D
3A
3B
1R
1S
1T
1U
2R
2S
2T
2U
3R
3S
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCy
CCx
ANSI
C78.377A
50
5000 K
5700 K
6500 K
8000 K
0A
0B
0C
0D
0R
0S
0T
0U
1A
1B
1C
1D
2A
2B
2C
2D
3A
3B
1R
1S
1T
1U
2R
2S
2T
2U
3R
3S
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCy
CCx
ANSI
C78.377A
E1
5000 K
5700 K
6500 K
8000 K
0A
0B
0C
0D
0R
0S
0T
0U
1A
1B
1C
1D
2A
2B
2C
2D
3A
3B
1R
1S
1T
1U
2R
2S
2T
2U
3R
3S
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.28
0.29
0.30
0.31
0.32
0.33
0.34
0.35
0.36
CCy
CCx
ANSI
C78.377A
E2
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
33
XLAMP® XP-E2 LED
CREE’S STANDARD WARM AND NEUTRAL WHITE KITS PLOTTED ON ANSI STANDARD CHROMATICITY REGIONS
2700 K
3000 K
3500 K
4000 K
4500 K
5000 K
3A
3B
3C
3D
4A
4B
4C
4D 5A1
5A2
5A3
5A4
5B1
5B2
5B3
5B4
5C1
5C2
5C3
5C4
5D1
5D2
5D3
5D4 6A1
6A2
6A3
6A4
6B1
6B2
6B3
6B4
6C1
6C2
6C3
6C4
6D1
6D2
6D3
6D4 7A1
7A2 7A3
7A4
7B1
7B2 7B3
7B4 7C1
7C2 7C3
7C4
7D1
7D2 7D3
7D4 8A1
8A2 8A3
8A4
8B1
8B2 8B3
8B4 8C1
8C2 8C3
8C4
8D1
8D2 8D3
8D4
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
CCy
CCx
ANSI
C78.377A
E3
E4
E5
E6
E8
E7
2700 K
3000 K
3500 K
4000 K
4500 K
5000 K
3A
3B
3C
3D
4A
4B
4C
4D 5A1
5A2
5A3
5A4
5B1
5B2
5B3
5B4
5C1
5C2
5C3
5C4
5D1
5D2
5D3
5D4 6A1
6A2
6A3
6A4
6B1
6B2
6B3
6B4
6C1
6C2
6C3
6C4
6D1
6D2
6D3
6D4 7A1
7A2 7A3
7A4
7B1
7B2 7B3
7B4 7C1
7C2 7C3
7C4
7D1
7D2 7D3
7D4 8A1
8A2 8A3
8A4
8B1
8B2 8B3
8B4 8C1
8C2 8C3
8C4
8D1
8D2 8D3
8D4
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
CCy
CCx
ANSI
C78.377A
F4
F6
F7
F5
F8
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
34
XLAMP® XP-E2 LED
CREE’S STANDARD WARM AND NEUTRAL WHITE KITS PLOTTED ON ANSI STANDARD CHROMATICITY REGIONS -
CONTINUED
CREE’S PC AMBER KIT PLOTTED ON THE 1931 CIE CURVE
2700 K
3000 K
3500 K
4000 K
4500 K
5000 K
3A
3B
3C
3D
4A
4B
4C
4D 5A1
5A2
5A3
5A4
5B1
5B2
5B3
5B4
5C1
5C2
5C3
5C4
5D1
5D2
5D3
5D4 6A1
6A2
6A3
6A4
6B1
6B2
6B3
6B4
6C1
6C2
6C3
6C4
6D1
6D2
6D3
6D4 7A1
7A2 7A3
7A4
7B1
7B2 7B3
7B4 7C1
7C2 7C3
7C4
7D1
7D2 7D3
7D4 8A1
8A2 8A3
8A4
8B1
8B2 8B3
8B4 8C1
8C2 8C3
8C4
8D1
8D2 8D3
8D4
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.33
0.34
0.35
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.47
0.48
0.49
CCy
CCx
ANSI
C78.377A
Z6
Z7
Z5
Z8
0.40
0.41
0.42
0.43
0.44
0.45
0.46
0.53
0.54
0.55
0.56
0.57
0.58
0.59
0.60
0.61
CCy
CCx
Y2
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
35
XLAMP® XP-E2 LED
CREE’S 2200K CCT WHITE KITS PLOTTED ON ANSI STANDARD CHROMATICITY REGIONS
2700 K
3000 K
2450 K2200 K
7C2 7C3
7C4
7D3
8A1
8A2 8A3
8A4
8B1
8B2 8B3
8B4 8C1
8C2 8C3
8C4
8D1
8D2 8D3
8D4
AB2
AB1
AA2
AA1
AB3
AB4
AA3
AA4
AC2
AC1
AD2
AD1
AC3
AC4
AD3
AD4
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.44
0.45
0.46
0.47
0.48
0.49
0.50
0.51
0.52
0.53
0.54
0.55
CCy
CCx
EA
2700 K
3000 K
2450 K2200 K
7C2 7C3
7C4
7D3
8A1
8A2 8A3
8A4
8B1
8B2 8B3
8B4 8C1
8C2 8C3
8C4
8D1
8D2 8D3
8D4
AB2
AB1
AA2
AA1
AB3
AB4
AA3
AA4
AC2
AC1
AD2
AD1
AC3
AC4
AD3
AD4
0.36
0.37
0.38
0.39
0.40
0.41
0.42
0.43
0.44
0.45
0.44
0.45
0.46
0.47
0.48
0.49
0.50
0.51
0.52
0.53
0.54
0.55
CCy
CCx
ZA
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
36
XLAMP® XP-E2 LED
CREE’S STANDARD CHROMATICITY KITS
The following table provides the chromaticity bins associated with chromaticity kits.
Color CCT Kit Chromaticity Bins
Cool
White
6200 K 51 0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U, 3A, 3B, 3R, 3S
6000 K 53 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 3A, 3B, 3S
6200 K 50 1A, 1B, 1C, 1D, 2A, 2B, 2C, 2D
6500 K E1 1A, 1B, 1C, 1D
5700 K E2 2A, 2B, 2C, 2D
Neutral
White
5000 K E3 3A, 3B, 3C, 3D
4750 K F4 3C, 3D, 4A, 4B
4500 K E4 4A, 4B, 4C, 4D
4250 K F5 4C, 4D, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4
4000 K E5 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4
4000 K Z5 5A3, 5B4, 5C1, 5D2
Warm
White
3750 K F6 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4, 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4
3500 K E6 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4, 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4
3500 K Z6 6A3, 6B4, 6C1, 6D2
3250 K F7 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4, 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4
3000 K E7 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4, 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4
3000 K Z7 7A3, 7B4, 7C1, 7D2
2850 K F8 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4
2700 K E8 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4
2700 K Z8 8A3, 8B4, 8C1, 8D2
2200 K EA AA1, AA2, AA3, AA4, AB1, AB2, AB3, AB4, AC1, AC2, AC3, AC4, AD1, AD2, AD3, AD4
2200 K ZA AA3, AB4, AC1, AD2
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
37
XLAMP® XP-E2 LED
BIN AND ORDER CODE FORMATS
XP-E2 bin codes and order codes are congured in the following manner:
Order Code Bin Code
SSSCCC-BD-HHHH-NNNNN
Internal code
Color
BWT = Gen 2 White
BRY = Gen 2 Roy al Blue
BBL = Gen 2 Blue
BGR = Gen 2 Green
BPA = Gen 2 PC Amber
BAM = Gen 2 Amber
BRO = Gen 2 Red-Orange
BRD = G en 2 Red
BPR = Gen 2 Photo Red
BFR = Gen 2 Far Red
Series
XPE = XP-E
Color specification
01 = Outdoor White
L1 = Standard CRI
H1 = 80 CRI minimum
P1 = 85 CRI minimum
U1 = 90 CRI minimum
Kit Number
SSSCCC-BD-WWW-FF-G-AA
Series
XPE = XP-E
Color specification
01 = Outdoor White
L1 = Standard CRI
H1 = 80 CRI minimum
P1 = 85 CRI minimum
U1 = 90 CRI minimum
Luminous or radiant flux group
Internal code
Voltage performance group
(am ber , red-orange, red)
Chromaticity bin or
dominant-wavelength group
Color
BWT = Gen 2 White
BRY = Gen 2 Roy al Blue
BBL = Gen 2 Blue
BGR = Gen 2 Green
BPA = Gen 2 PC Amber
BAM = Gen 2 Amber
BRO = Gen 2 Red-Orange
BRD = G en 2 Red
BPR = Gen 2 Photo Red
BFR = G en 2 Far Red
order code & bin code headings
& formats are in a table
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
38
XLAMP® XP-E2 LED
REFLOW SOLDERING CHARACTERISTICS
In testing, Cree has found XLamp XP-E2 LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general
guideline, Cree recommends that users follow the recommended soldering prole provided by the manufacturer of the solder paste used,
and therefore it is the lamp or luminaire manufacturer’s responsibility to determine applicable soldering requirements.
Note that this general guideline may not apply to all PCB designs and congurations of reow soldering equipment.
Profile Feature Lead-Free Solder
Average Ramp-Up Rate (Tsmax to Tp) 1.2°C/second
Preheat: Temperature Min (Tsmin) 120 °C
Preheat: Temperature Max (Tsmax) 170 °C
Preheat: Time (tsmin to tsmax)65-150 seconds
Time Maintained Above: Temperature (TL) 217 °C
Time Maintained Above: Time (tL) 45-90 seconds
Peak/Classication Temperature (Tp) 235 - 245 °C
Time Within 5°C of Actual Peak Temperature (tp) 20-40 seconds
Ramp-Down Rate 1 - 6 °C/second
Time 25°C to Peak Temperature 4 minutes max.
Note: All temperatures refer to topside of the package, measured on the package body surface.
IPC/JEDEC J-STD-020C
TP
TL
Temperature
Time
t 25˚C to Peak
Preheat
ts
tS
tP
25
Ramp-down
Ramp-up
Critical Zone
TL to TP
Tsmax
Tsmin
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
39
XLAMP® XP-E2 LED
NOTES
Measurements
The luminous ux, radiant power, chromaticity, forward voltage and CRI measurements in this document are binning specications only
and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number
of factors that are not within Cree’s control and are not intended or provided as operational specications for the products. Calculated
values are provided for informational purposes only and are not intended or provided as specications.
Pre-Release Qualication Testing
Please read the LED Reliability Overview for details of the qualication process Cree applies to ensure long-term reliability for XLamp
LEDs and details of Cree’s pre-release qualication testing for XLamp LEDs.
Lumen Maintenance
Cree now uses standardized IES LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LED lumen maintenance.
For information on the specic LM-80 data sets available for this LED, refer to the public LM-80 results document.
Please read the Long-Term Lumen Maintenance application note for more details on Cree’s lumen maintenance testing and forecasting.
Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect
the LED junction temperature.
Moisture Sensitivity
Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering.
Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity.
Once the MBP is opened, XLamp XP-E2 LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited oor life in
conditions of ≤ 30 ºC/85% relative humidity (RH). Regardless of the storage condition, Cree recommends sealing any unsoldered LEDs
in the original MBP.
RoHS Compliance
The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as
implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product
Ecology section of the Cree website.
REACh Compliance
REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA)
has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to
insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available
upon request.
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
40
XLAMP® XP-E2 LED
UL® Recognized Component
This product meets the requirements to be considered a UL Recognized Component with Level 4 enclosure consideration. The LED
package or a portion thereof has been investigated as a re and electrical enclosure per ANSI/UL 8750.
Vision Advisory
WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please
refer to the LED Eye Safety application note.
NOTES - CONTINUED
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
41
XLAMP® XP-E2 LED
MECHANICAL DIMENSIONS
Thermal vias, if present, are not shown on these drawings.
All measurements are ±.13 mm unless otherwise indicated.
Side View
Top View
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5°
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5°
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
3.45
3.45
R1.53
.73
3.30
.50
2.30
3.30
1.30
2.26
.50
.58
3.30
.50
2.30
.64
1.01
.75
.25
3.30
.50
.50
3.30
3.30
1.30
3.30 REF.
3.30 REF.
1/122.000
C
2610-00029
OUTLINE DRAWING XPE G2
07/19/12D. CRONIN
REVISONS
REV DESCRIPTION BY DATE APP'D
RECOMMENDED PCB SOLDER PAD
RECOMMENDED STENCIL PATTERN
(HATCHED AREA IS OPENING)
ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED
PRIMARY
ALTERNATIVE
OPTICAL
REFERENCE
OPTICAL
REFERENCE
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5°
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5°
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
3.45
3.45
R1.53
.73
3.30
.50
2.30
3.30
1.30
2.26
.50
.58
3.30
.50
2.30
.64
1.01
.75
.25
3.30
.50
.50
3.30
3.30
1.30
3.30 REF.
3.30 REF.
1/122.000
C
2610-00029
OUTLINE DRAWING XPE G2
07/19/12D. CRONIN
REVISONS
REV DESCRIPTION BY DATE APP'D
RECOMMENDED PCB SOLDER PAD
RECOMMENDED STENCIL PATTERN
(HATCHED AREA IS OPENING)
ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED
PRIMARY
ALTERNATIVE
OPTICAL
REFERENCE
OPTICAL
REFERENCE
Anode
Bottom View Alternate Bottom View
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5°
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5°
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
3.45
3.45
R1.53
.73
3.30
.50
2.30
3.30
1.30
2.26
.50
.58
3.30
.50
2.30
.64
1.01
.75
.25
3.30
.50
.50
3.30
3.30
1.30
3.30 REF.
3.30 REF.
1/122.000
C
2610-00029
OUTLINE DRAWING XPE G2
07/19/12D. CRONIN
REVISONS
REV DESCRIPTION BY DATE APP'D
RECOMMENDED PCB SOLDER PAD
RECOMMENDED STENCIL PATTERN
(HATCHED AREA IS OPENING)
ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED
PRIMARY
ALTERNATIVE
OPTICAL
REFERENCE
OPTICAL
REFERENCE
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5°
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5°
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
3.45
3.45
R1.53
.73
3.30
.50
2.30
3.30
1.30
2.26
.50
.58
3.30
.50
2.30
.64
1.01
.75
.25
3.30
.50
.50
3.30
3.30
1.30
3.30 REF.
3.30 REF.
1/122.000
C
2610-00029
OUTLINE DRAWING XPE G2
07/19/12D. CRONIN
REVISONS
REV DESCRIPTION BY DATE APP'D
RECOMMENDED PCB SOLDER PAD
RECOMMENDED STENCIL PATTERN
(HATCHED AREA IS OPENING)
ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED
PRIMARY
ALTERNATIVE
OPTICAL
REFERENCE
OPTICAL
REFERENCE
Cathode
Cathode
Electrically neutral
thermal pad
Electrically neutral
thermal pad
Anode Anode
Recommended PCB Solder Pad Recommended Stencil Pattern
(Hatched Area is Open)
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5°
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5°
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
3.45
3.45
R1.53
.73
3.30
.50
2.30
3.30
1.30
2.26
.50
.58
3.30
.50
2.30
.64
1.01
.75
.25
3.30
.50
.50
3.30
3.30
1.30
3.30 REF.
3.30 REF.
1/122.000
C
2610-00029
OUTLINE DRAWING XPE G2
07/19/12D. CRONIN
REVISONS
REV DESCRIPTION BY DATE APP'D
RECOMMENDED PCB SOLDER PAD
RECOMMENDED STENCIL PATTERN
(HATCHED AREA IS OPENING)
ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED
PRIMARY
ALTERNATIVE
OPTICAL
REFERENCE
OPTICAL
REFERENCE
SIZE
TITLE
OF
REV.
SHEET
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300
Fax (919) 313-5558
4600 Silicon Drive
Durham, N.C 27703
UNAUTHORIZED PERSON WITHOUT
THE WRITTEN CONSENT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
CONTAINED WITHIN ARE THE PROPRIETARY AND
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5°
.XXX ± .25
.XX ± .75
.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125
X° ± .5°
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.
TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH:
1.6
3.45
3.45
R1.53
.73
3.30
.50
2.30
3.30
1.30
2.26
.50
.58
3.30
.50
2.30
.64
1.01
.75
.25
3.30
.50
.50
3.30
3.30
1.30
3.30 REF.
3.30 REF.
1/122.000
C
2610-00029
OUTLINE DRAWING XPE G2
07/19/12D. CRONIN
REVISONS
REV DESCRIPTION BY DATE APP'D
RECOMMENDED PCB SOLDER PAD
RECOMMENDED STENCIL PATTERN
(HATCHED AREA IS OPENING)
ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWISE NOTED
PRIMARY
ALTERNATIVE
OPTICAL
REFERENCE
OPTICAL
REFERENCE
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
42
XLAMP® XP-E2 LED
TAPE AND REEL
All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard.
All dimensions in mm.
Loaded Pockets
(1,000 Lamps)
Leader
400mm (min) of
empty pockets with
at least 100mm
sealed by tape
(50 empty pockets min.)
Trailer
160mm (min) of
empty pockets
sealed with tape
(20 pockets min.)
START
END
Cathode Side
Anode Side
(denoted by + and circle)
160.0
A
A
B
2.5
±.1
SECTION A-A
SCALE 2 : 1
1.5
±.1
8.0
±.1
4.0
±.1
1.75
±.10
12.0 .0
+
.3
DETAIL B
SCALE 2 : 1
13
mm
7"
Cover Tape
Pocket Tape
User Feed Direction
User Feed Direction
Ø13
Ø61 ± 0.5
12.40 0
+
2.00
MEASURED AT HUB
12.40
MEASURED AT INSIDE EDGE
16.40
SHEET 1 OF 1
1:2
2400-00005
SIZE
TITLE
REV.
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
.X ± 0.3
X° ± 2°
.XX ± .10
.X ± .25
FOR SHEET METAL PARTS ONLY
.XX ± .13
X° ± 1°
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS & BEFORE FINISH.
TOLERANCE UNLESS SPECIFIED:
SCALE
A
B
C
D
1
23456
65432
1
A
B
C
D
Phone (919) 361-4770
4600 Silicon Drive
Durham, N.C 27703
NOTICE
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
CONTAINED WITHIN ARE THE PROPRIETARY AND
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT
OF CREE, INC.
Reel,
7" x 12mm Wide
B
LIUDEZHI
2012/5/25
PS
Ø190
½öÓÃÓÚÆÀ¹À¡£
°æȨËùÓÐ (c) by Foxit Software Company, 2004
ÓÉ Foxit PDF Editor ±à¼-
OD 7.5''
Ø13
Ø61 ± 0.5
12.40 0
+
2.00
MEASURED AT HUB
12.40
MEASURED AT INSIDE EDGE
16.40
SHEET 1 OF 1
1:2
2400-00005
SIZE
TITLE
REV.
C
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
.X ± 0.3
X° ± 2°
.XX ± .10
.X ± .25
FOR SHEET METAL PARTS ONLY
.XX ± .13
X° ± 1°
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS & BEFORE FINISH.
TOLERANCE UNLESS SPECIFIED:
SCALE
A
B
C
D
1
23456
65432
1
A
B
C
D
Phone (919) 361-4770
4600 Silicon Drive
Durham, N.C 27703
NOTICE
CREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
CONTAINED WITHIN ARE THE PROPRIETARY AND
CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT
MAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY
UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENT
OF CREE, INC.
Reel,
7" x 12mm Wide
B
LIUDEZHI
2012/5/25
PS
Ø190
½öÓÃÓÚÆÀ¹À¡£
°æȨËùÓÐ (c) by Foxit Software Company, 2004
ÓÉ Foxit PDF Editor ±à¼-
OD 7.5''
Y
Y
XX
REF 0.59
W
F(III)
P1
D1
1.5 MIN.
Bo
Ao
R0.2
TYPICAL
REF 4.375
Ko
Other material available.(IV)
(III)
(II)
(I)
hole to centerline of pocket.
Measured from centerline of sprocket
holes is
± 0.20.
Cumulative tolerance of 10 sprocket
to centerline of pocket.
Measured from centerline of sprocket hole
SECTION Y-Y
SECTION X-X
2.0 ±0.05 (I)
P2
1.55
±
0.05
Do
4.0 ±0.1 (II)
Po
1.75 ±0.1
E1
0.30 ±0.05
T
REF R 2.24
2.40Ko +0.0/-0.1
3.70
1
W
F
P
+/- 0.05
+/- 0.1
+0.3/-0.1
5.50
8.00
12.00
Ao 3.70 +/- 0.1
Bo +/- 0.1
Y
Y
XX
REF 0.59
W
F(III)
P1
D1
1.5 MIN.
Bo
Ao
R
0.2
TYPICAL
REF 4.375
Ko
Other material available.(IV)
(III)
(II)
(I)
hole to centerline of pocket.
Measured from centerline of sprocket
holes is
± 0.20.
Cumulative tolerance of 10 sprocket
to centerline of pocket.
Measured from centerline of sprocket hole
SECTION Y-Y
SECTION X-X
2.0 ±0.05 (I)
P2
1.55
±
0.05
Do
4.0 ±0.1 (II)
Po
1.75 ±0.1
E1
0.30 ±0.05
T
REF R 2.24
2.40Ko +0.0/-0.1
3.70
1
W
F
P
+/- 0.05
+/- 0.1
+0.3/-0.1
5.50
8.00
12.00
Ao 3.70 +/- 0.1
Bo +/- 0.1
Y
Y
XX
REF 0.59
W
F(III)
P1
D1
1.5 MIN.
Bo
Ao
R
0.2
TYPICAL
REF 4.375
Ko
Other material available.(IV)
(III)
(II)
(I)
hole to centerline of pocket.
Measured from centerline of sprocket
holes is
± 0.20.
Cumulative tolerance of 10 sprocket
to centerline of pocket.
Measured from centerline of sprocket hole
SECTION Y-Y
SECTION X-X
2.0 ±0.05 (I)
P2
1.55
±
0.05
Do
4.0 ±0.1 (II)
Po
1.75 ±0.1
E1
0.30 ±0.05
T
REF R 2.24
2.40Ko +0.0/-0.1
3.70
1
W
F
P
+/- 0.05
+/- 0.1
+0.3/-0.1
5.50
8.00
12.00
Ao 3.70 +/- 0.1
Bo +/- 0.1
CATHODE SIDE
ANODE SIDE
Copyright © 2012-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo and XLamp® are registered trademarks of Cree, Inc. UL® and
the UR logo are registered trademarks of UL LLC.
43
XLAMP® XP-E2 LED
PACKAGING
Patent Label
(on bottom of box)
Label with Cree Bin Code,
Quantity, Reel ID
Label with Cree Bin Code,
Quantity, Reel ID
Label with Cree Order Code,
Quantity, Reel ID, PO #
Label with Cree Order Code,
Quantity, Reel ID, PO #
Label with Cree Bin Code,
Quantity, Reel ID
Unpackaged Reel
Packaged Reel
Boxed Reel
CREE Bin Code
& Barcode Label
Vacuum-Sealed
Moisture Barrier Bag
Label with Customer
P/N, Qty, Lot #, PO #
Label with Cree Bin
Code, Qty, Lot #
Label with Cree Bin
Code, Qty, Lot #
Vacuum-Sealed
Moisture Barrier Bag
Patent Label
Label with Customer Order
Code, Qty, Reel ID, PO #
