IDT6198S IDT6198L CMOS STATIC RAM 64K (16K x 4-BIT) with Output Control Integrated Device Technology, Inc. FEATURES: * High-speed (equal access and cycle times) -- Military: 20/25/35/45/55/70/85ns (max.) -- Commercial: 15/20/25/35ns (max.) * Output Enable (OE) pin available for added system flexibility * Low-power consumption * JEDEC compatible pinout * Battery back-up operation--2V data retention (L version only) * 24-pin CERDIP, high-density 28-pin leadless chip carrier, and 24-pin SOJ * Produced with advanced CMOS technology * Bidirectional data inputs and outputs * Military product compliant to MIL-STD-883, Class B DESCRIPTION: The IDT6198 is a 65,536-bit high-speed static RAM organized as 16K x 4. It is fabricated using IDT's high-performance, high-reliability technology--CMOS. This state-of-theart technology, combined with innovative circuit design tech- niques, provides a cost-effective approach for memory intensive applications. Timing parameters have been specified to meet the speed demands of the IDT79R3000 RISC processors. Access times as fast as 15ns are available. The IDT6198 offers a reduced power standby mode, ISB1, which is activated when CS goes HIGH. This capability significantly decreases system, while enhancing system reliability. The low-power version (L) also offers a battery backup data retention capability where the circuit typically consumes only 30W when operating from a 2V battery. All inputs and outputs are TTL-compatible and operate from a single 5V supply. The IDT6198 is packaged in either a 24-pin 300 mil CERDIP, 28-pin leadless chip carrier or 24-pin J-bend small outline IC. Military grade product is manufactured in compliance with the latest revision of MIL-STD-883, Class B, making it ideally suited to military temperature applications demanding the highest level of performance and reliability. FUNCTIONAL BLOCK DIAGRAM A0 VCC GND 65,536-BIT MEMORY ARRAY DECODER A13 I/O0 I/O1 I/O2 COLUMN I/O INPUT DATA CONTROL I/O3 CS WE OE 2987 drw 01 The IDT logo is a registered trademark of Integrated Device Technology, Inc. MILITARY AND COMMERCIAL TEMPERATURE RANGES 1994 Integrated Device Technology, Inc. MAY 1994 6.3 DSC-1010/4 1 IDT6198S/L CMOS STATIC RAM 64K (16K x 4-BIT) MILITARY AND COMMERCIAL TEMPERATURE RANGES TRUTH TABLE(1) PIN CONFIGURATIONS A0 A1 A2 A3 A4 A5 A6 A7 A8 CS OE GND 1 24 2 23 3 22 4 D24-1 & SO24-4 5 6 V CC A 13 A 12 A 11 A 10 A9 NC I/O 3 I/O 2 I/O 1 I/O 0 21 20 19 7 18 8 17 9 16 10 15 11 14 12 13 Mode CS WE OE I/O Power Standby H X X High-Z Standby Read L H L DATAOUT Write L L X DATAIN Active Read L H H High-Z Active NOTE: 1. H = VIH, L = VIL, X = Don't Care WE Symbol A0 NC NC V CC NC 3 1 28 27 26 5 25 6 24 7 23 L28-2 8 22 9 21 10 20 11 19 18 12 13 14 15 16 17 OE GND NC WE I/O0 CS 2 4 NC A 13 A 12 A 11 A 10 A9 I/O3 I/O2 I/O1 2987 drw 03 CS WE OE Mil. Unit Terminal Voltage -0.5 to +7.0 with Respect to GND -0.5 to +7.0 V TA Operating Temperature 0 to +70 -55 to +125 C TBIAS Temperature Under Bias -55 to +125 -65 to +135 C TSTG Storage Temperature -55 to +125 -65 to +150 C PT Power Dissipation 1.0 1.0 W IOUT DC Output Current 50 50 mA CAPACITANCE (TA = +25C, f = 1.0MHz) Symbol PIN DESCRIPTIONS A0-A13 Com'l. NOTE: 2987 tbl 03 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. LCC TOP VIEW Name Rating VTERM DIP/SOJ TOP VIEW A1 A2 A3 A4 A5 A6 A7 A8 2987 tbl 02 ABSOLUTE MAXIMUM RATINGS(1) 2987 drw 02 INDEX Active Parameter(1) CIN Input Capacitance CI/O I/O Capacitance Conditions Max. Unit VIN = 0V 7 pF VOUT = 0V 7 pF NOTE: 2987 tbl 04 1. This parameter is determined by device characterization, but is not production tested. Description Address Inputs Chip Select Write Enable Output Enable I/O0-I/O3 Data Input/Output VCC Power GND Ground 2987 tbl 01 6.3 2 IDT6198S/L CMOS STATIC RAM 64K (16K x 4-BIT) MILITARY AND COMMERCIAL TEMPERATURE RANGES RECOMMENDED DC OPERATING CONDITIONS Symbol RECOMMENDED OPERATING TEMPERATURE AND SUPPLY VOLTAGE Parameter Min. Typ. VCC Supply Voltage 4.5 5.0 5.5 V Military GND Supply Voltage 0 0 0 V Commercial VIH Input High Voltage 2.2 -- 6.0 V -- 0.8 V VIL Input Low Voltage -0.5 (1) Max. Unit Grade Temperature GND VCC -55C to +125C 0V 5V 10% 0C to +70C 0V 5V 10% 2987 tbl 06 NOTE: 2987 tbl 05 1. VIL (min.) = -3.0V for pulse width less than 20ns, once per cycle. DC ELECTRICAL CHARACTERISTICS VCC = 5.0V 10% IDT6198S Symbol Parameter Min. Max. Min. Max. Unit VCC = Max., VIN = GND to VCC MIL. COM'L. -- -- 10 5 -- -- 5 2 A Output Leakage Current VCC = Max., CS = VIH, VOUT = GND to VCC MIL. COM'L. -- -- 10 5 -- -- 5 2 A Output Low Voltage IOL = 10mA, VCC = Min. 0.5 -- 0.5 V IOL = 8mA, VCC = Min. -- 0.4 -- 0.4 IOH = -4mA, VCC = Min. 2.4 -- 2.4 -- |ILI| Input Leakage Current |ILO| VOL VOH Test Condition IDT6198L Output High Voltage V 2987 tbl 07 DC ELECTRICAL CHARACTERISTICS(1) (VCC = 5V 10%, VLC = 0.2V, VHC = VCC - 0.2V) 6198S15 6198L15 Symbol ICC1 ICC2 ISB ISB1 Parameter 6198S20 6198L20 6198S25 6198L25 Power Com'l. Mil. Com'l. Mil. Com'l. 6198S35 6198L35 6198S45 6198L45 6198S55/70/85 6198L55/70/85 Mil. Com'l. Mil. Unit Operating Power Supply Current CS = VIL, Outputs Open VCC = Max., f = 0(2) S 100 -- 100 105 100 105 100 105 -- 105 -- 105 mA L 75 -- 70 80 70 80 70 80 -- 80 -- 80 Dynamic Operating Current CS = VIL, Outputs Open VCC = Max., f = fMAX(2) S 135 -- 130 160 125 155 125 140 -- 140 -- 140 L 125 -- 115 130 105 120 105 115 -- 110 -- 110 Standby Power Supply Current (TTL Level) CS VIH, VCC = Max., Outputs Open, f = fMAX(2) S 60 -- 55 70 50 60 45 50 -- 50 -- 50 L 45 -- 40 50 35 40 30 35 -- 35 -- 35 Full Standby Power Supply Current (CMOS Level) CS VHC, VCC=Max., VIN V HC or VIN VLC, f = 0(2) S 20 -- 15 25 15 20 15 20 -- 20 -- 20 L 1.5 -- 0.5 1.5 0.5 1.5 0.5 1.5 -- 1.5 -- 1.5 Mil. Com'l. Mil. Com'l. NOTES: 1. All values are maximum guaranteed values. 2. At f = fMAX address and data inputs are cycling at the maximum frequency of read cycles of 1/tRC. f = 0 means no input lines change. 6.3 mA mA mA 2987 tbl 06 3 IDT6198S/L CMOS STATIC RAM 64K (16K x 4-BIT) MILITARY AND COMMERCIAL TEMPERATURE RANGES DATA RETENTION CHARACTERISTICS OVER ALL TEMPERATURE RANGES (L Version Only) VLC = 0.2V, VHC = VCC - 0.2V Typ. (1) VCC @ Symbol Parameter Test Condition VDR VCC for Data Retention ICCDR Data Retention Current tCDR(3) Chip Deselect to Data Retention Time tR(3) Operation Recovery Time (3) |ILI| -- MIL. COM'L. Min. 2.0v 3.0V 2.0V 3.0V Unit 2.0 -- -- -- -- V -- -- 10 10 15 15 600 150 900 225 A 0 -- -- -- -- ns tRC(2) -- -- -- -- ns -- -- -- 2 2 A CS VHC VIN VHC or VLC Input Leakage Current Max. VCC @ NOTES: 1. TA = +25C. 2. tRC = Read Cycle Time. 3. This parameter is guaranteed by device characterization but is not production tested. 2987 tbl 09 LOW VCC DATA RETENTION WAVEFORM DATA RETENTION MODE VCC 4.5V 4.5V VDR 2V tCDR CS tR VIH VIH VDR 2987 drw 04 AC TEST CONDITIONS Input Pulse Levels GND to 3.0V Input Rise/Fall Times 5ns Input Timing Reference Levels 1.5V Output Reference Levels 1.5V AC Test Load See Figures 1 and 2 2987 tbl 10 5V 5V 480 480 DATA OUT DATA OUT 255 255 30pF* 2987 drw 05 5pF* 2987 drw 06 Figure 1. AC Test Load Figure 2. AC Test Load (for tOLZ, tCLZ, tOHZ, tWHZ, tCHZ and tOW) *Includes scope and jig capacitances 6.3 4 IDT6198S/L CMOS STATIC RAM 64K (16K x 4-BIT) MILITARY AND COMMERCIAL TEMPERATURE RANGES AC ELECTRICAL CHARACTERISTICS (VCC = 5.0V 10%, All Temperature Ranges) 6198S15(1) 6198L15(1) Symbol Parameter 6198S20 6198L20 6198S25 6198L25 Min. Max. Min. Max. Min. 6198S35 6198L35 6198S45/55(2) 6198S70/85(2) 6198L45/55(2) 6198L70/85(2) Max. Min. Max. Min. Max. Min. Max. Unit Read Cycle tRC Read Cycle Time 15 -- 20 -- 25 -- 35 -- 45/55 -- 70/85 -- ns tAA Address Access Time -- 15 -- 19 -- 25 -- 35 -- 45/55 -- 70/85 ns Chip Select Access Time -- 15 -- 20 -- 25 -- 35 -- 45/55 -- 70/85 ns Chip Select to Output in Low-Z 5 -- 5 -- 5 -- 5 -- 5 -- 5 -- ns tACS (3) tCLZ tOE tOLZ Output Enable to Output Valid -- 8 -- 9 -- 11 -- 18 -- 25/35 -- 45/55 ns (3) Output Enable to Output in Low-Z 5 -- 5 -- 5 -- 5 -- 5 -- 5 -- ns (3) Chip Select to Output in High-Z 2 7 2 8 2 10 2 14 -- 15/20 -- 25/30 ns (3) Output Disable to Output in High-Z 2 7 2 8 2 9 2 15 -- 15/20 -- 25/30 ns tCHZ tOHZ tOH Output Hold from Address Change 5 -- 5 -- 2 -- 5 -- 5 -- 5 -- ns tPU (3) Chip Select to Power Up Time 0 -- 0 -- 0 -- 0 -- 0 -- 0 -- ns tPD (3) Chip Deselect to Power Down Time -- 15 -- 20 -- 25 -- 35 -- 45/55 -- 70/85 ns NOTES: 1. 0 to +70C temperature range only. 2. -55C to +125C temperature range only. 3. This parameter is guaranteed by device characterization but is not production tested. 2987 tbl 11 TIMING WAVEFORM OF READ CYCLE NO. 1(1) tRC ADDRESS tAA tOH OE tOE CS tOLZ tOHZ (5) (5) tACS tCHZ (5) tCLZ (5) DATA VALID DATAOUT 2987 drw 07 NOTES: 1. WE is HIGH for Read cycle. 2. Device is continuously selected, CS is LOW. 3. Address valid prior to or coincident with CS transition LOW. 4. OE is LOW. 5. Transition is measured 200mV from steady state voltage. 6.3 5 IDT6198S/L CMOS STATIC RAM 64K (16K x 4-BIT) MILITARY AND COMMERCIAL TEMPERATURE RANGES TIMING WAVEFORM OF READ CYCLE NO. 2(1, 2, 4) tRC ADDRESS tAA tOH DATAOUT tOH PREVIOUS DATA VALID DATA VALID 2987 drw 08 TIMING WAVEFORM OF READ CYCLE NO. 3(1, 3, 4) CS tACS tCHZ tCLZ (5) DATAOUT (5) DATA VALID tPU tPD ICC VCC SUPPLY CURRENT ISB 2987 drw 09 NOTES: 1. WE is HIGH for Read cycle. 2. Device is continuously selected, CS is LOW. 3. Address valid prior to or coincident with CS transition LOW. 4. OE is LOW. 5. Transition is measured 200mV from steady state voltage. AC ELECTRICAL CHARACTERISTICS (VCC = 5.0V 10%, All Temperature Ranges) 6198S15(1) 6198L15(1) Symbol Parameter 6198S20 6198L20 6198S25 6198L25 Min. Max. Min. Max. Min. 6198S35 6198L35 6198S45/55(2) 6198S70/85(2) 6198L45/55(2) 6198L70/85(2) Max. Min. Max. Min. Max. Min. Max. Unit Write Cycle tWC Write Cycle Time 14 -- 17 -- 20 -- 30 -- 40/50 -- 60/75 -- ns tCW Chip Select to End-of-Write 14 -- 17 -- 20 -- 25 -- 35/50 -- 60/75 -- ns tAW Address Valid to End-of-Write 14 -- 17 -- 20 -- 25 -- 35/50 -- 60/75 -- ns tAS Address Set-up Time 0 -- 0 -- 0 -- 0 -- 0 -- 0 -- ns tWP Write Pulse Width 14 -- 17 -- 20 -- 25 -- 35/50 -- 60/75 -- ns tWR Write Recovery Time 0 -- 0 -- 0 -- 0 -- 0 -- 0 -- ns tWHZ(3) Write Enable to Output in High-Z -- 5 -- 6 -- 7 -- 10 -- 15/25 -- 30/40 ns tDW Data Valid to End-of-Write 10 -- 10 -- 13 -- 15 -- 20/25 -- 30/35 -- ns tDH Data Hold Time 0 -- 0 -- 0 -- 0 -- 0 -- 0 -- ns tOW(3) Output Active from End-of-Write 5 -- 5 -- 5 -- 5 -- 5 -- 5 -- ns NOTES: 1. 0 to +70C temperature range only. 2. -55C to +125C temperature range only. 3. This parameter is guaranteed by device characterization, but is not production tested. 6.3 2987 tbl 12 6 IDT6198S/L CMOS STATIC RAM 64K (16K x 4-BIT) MILITARY AND COMMERCIAL TEMPERATURE RANGES TIMING WAVEFORM OF WRITE CYCLE NO. 1 (WE CONTROLLED TIMING)(1, 2, 3, 7) tWC ADDRESS OE tAW CS tWP tAS tWR WE tWZ (6) DATAOUT tOW (6) (4) (4) tDW DATAIN tDH DATA VALID 2987 drw 10 TIMING WAVEFORM OF WRITE CYCLE NO. 2 (CS CONTROLLED TIMING)(1, 2, 3) tWC ADDRESS tAW CS tAS tCW tWR WE tDW DATAIN tDH DATA VALID 2987 drw 11 NOTES: 1. WE or CS must be HIGH during all address transitions. 2. A write occurs during the overlap ( tWP) of a LOW CS and a LOW WE. 3. tWR is measured from the earlier of CS or WE going HIGH to the end of the write cycle. 4. During this period, I/O pins are in the output state so that the input signals must not be applied. 5. If the CS LOW transition occurs simultaneously with or after the WE LOW transition, the outputs remain in a high-impedance state. 6. Transition is measured 200mV from steady state. 7. If OE is LOW during a WE controlled write cycle, the write pulse width must be the larger of tWP or (tWHZ + tDW) to allow the I/O drivers to turn off and data to be placed on the bus for the required tDW. If OE is HIGH during a WE controlled write cycle, this requirement does not apply and the write pulse can be as short as the specified tWP. 6.3 7 IDT6198S/L CMOS STATIC RAM 64K (16K x 4-BIT) MILITARY AND COMMERCIAL TEMPERATURE RANGES ORDERING INFORMATION IDT6198 X XX X X Device Type Power Speed Package Process/ Temperature Range Blank Commercial (0C to +70C) B Military (-55C to +125C) Compliant to MIL-STD-883, Class B D L Y 300 mil CERDIP (D24-1) Leadless Chip Carrier (L28-2) Small Outline IC J-Bend (SO24-4) 15 20 25 35 45 55 70 85 Commercial Only S L Standard Power Low Power Military Only Military Only Military Only Military Only Speed in nanoseconds 2987 drw 12 6.3 8