Mini-Circuits - Specification for Frequency Mixer - TAK-6R
Frequency Mixers
print this page
LO Power Level 7 dBm
Pin Configuration
Port LO RF IF Gnd Ext. Case Gnd Not Used
t 1 8 5,6^ 2,3,4,7 3,4,7 -
^ pins must be connected together externally.
Outline Drawing
Case Style - A04 (inch,mm ) weight: 3.7 grams.
A B C D E F G H J
.770
19.558 .800
20.320 .200
5.080 .210
5.334 .370
9.398 .400
10.160 .200
5.080 .20
5.080 .14
3.556
K L M N P Q R S T
.031
0.787
Tolerance: .x ± .1 .xx ± .03 .xxx ± .015 inch.
Material and Finish:
Header material: C.R.S. Pin material: #52 alloy. Finish: electro
tin, hot-oil flowed. Cover material:upro-nickel.
Mounting:
Insulated spacer available. Request P/N B14-045-01.
Pin's meniscus (of header): 0.015" max.
Special Tolerances:
Pin diameter ±.005 inch.
Notes:
•+7dBm LO, up to +1 dBm RF
•Absolute maximum power, voltage and current ratings:
a. RF power, 50mW
b. Peak IF current, 40mA
•General Quality Control Procedures and Environmental
Specifications are given in Mini- Circuits Guarantees
Quality.
Hi-Rel, MIL description are given in Hi-Rel and MIL
•Prices and Specifications subjects to change without
notice.
TAK-6R
Electrical Specifications
TAK-6R LO Power Level 7 dBm
Frequency
MHz Max. Conversion
Loss dB Min. LO-RF
Isolation dB Min. LO-IF
Isolation dB
LO/RF IF Mid-Band Total Range L M U L M U
0.500-600 DC-600 7.0 8.0 50 30 30 40 25 25
L=low range(fL to 10fL) M=mid range(10fL to fU/2) U=upper range(fU/2 to fU)
Typical Performance Data
TAK-6R Conversion Loss
(dB) ISO Isolation L-R (dB) Isolation L-I (dB)
RF
MHz LO
MHz
LO
+4
dBm
LO
+7
dBm
LO
+10
dBm
LO
(MHz)
LO
+4
dBm
LO
+7
dBm
LO
+10
dBm
LO
+4
dBm
LO
+7
dBm
LO
+10
dBm
0.500 30.500 7.80 7.38 7.11 0.500 64.00 67.00 70.00 64.00 67.00 70.00
1.000 31.000 7.13 6.75 6.47 1.000 64.00 67.00 70.00 64.00 67.00 70.00
2.000 32.000 6.54 6.13 5.93 2.000 64.00 67.00 70.00 64.00 67.00 70.00
5.000 35.000 5.88 5.55 5.38 5.000 64.00 67.00 70.00 64.00 67.00 70.00
10.000 40.000 5.87 5.53 5.32 10.000 64.00 67.00 70.00 64.00 67.00 64.95
20.000 50.000 5.94 5.57 5.35 20.000 64.00 61.27 58.83 64.00 58.72 56.92
40.466 70.470 5.89 5.59 5.39 40.466 55.07 53.48 52.39 53.40 51.73 50.74
60.449 90.450 5.77 5.51 5.39 60.449 51.05 49.77 48.80 49.58 48.51 47.29
100.300 70.000 5.71 5.45 5.32 100.300 46.67 45.73 44.75 45.85 44.74 43.77
140.380 110.380 5.66 5.45 5.33 140.380 44.05 42.94 42.16 43.49 42.35 41.44
200.000 170.000 5.83 5.64 5.55 200.000 41.47 40.43 39.65 40.97 39.87 38.88
240.300 210.300 5.86 5.67 5.55 240.300 39.57 38.69 37.99 38.96 38.10 37.46
280.260 250.260 5.78 5.58 5.48 280.260 39.59 38.77 37.90 38.36 37.77 36.85
360.190 330.190 6.25 5.95 5.80 360.190 36.88 36.13 35.65 35.82 35.08 34.54
400.160 370.160 6.12 5.94 5.87 400.160 36.06 36.07 35.61 34.62 34.75 34.34
480.090 450.090 6.72 6.48 6.32 480.090 34.66 35.09 35.31 30.47 31.56 32.60
500.080 470.080 6.83 6.59 6.37 500.080 34.63 34.94 35.60 29.91 30.74 32.08
540.040 510.040 6.80 6.43 6.19 540.040 35.64 35.12 35.58 30.37 30.07 31.01
580.010 550.010 6.93 6.37 6.03 580.010 37.16 36.24 35.75 32.15 31.22 30.63
600.000 570.000 7.13 6.51 6.16 600.000 37.47 36.75 35.81 33.00 32.22 31.07
http://www.minicircuits.com/cgi-bin/spec?cat=mixer&model=TAK-6R&pix=a05.gif&bv=4 (1 of 2) [7/9/2004 9:45:37 PM]
Mini-Circuits - Specification for Frequency Mixer - TAK-6R
RF/LO VSWR RF port VSWR LO port IF VSWR IF port Ø detection
FREQ.
(MHz)
LO
+4
dBm
LO
+7
dBm
LO
+10
dBm
LO
+4
dBm
LO
+7
dBm
LO
+10
dBm
FREQ.
(MHz)
LO
+4
dBm
LO
+7
dBm
LO
+10
dBm
,FREQ.
MHz
max.DC
output
mV
DC
offset
mV
5.001 1.19 1.26 1.30 1.88 2.80 4.21 5.001 1.49 1.31 1.21 0.50 -220.38 -0.13
10.000 1.10 1.18 1.24 1.84 2.76 3.86 10.000 1.50 1.32 1.21 1.00 -221.24 -0.14
20.000 1.06 1.16 1.22 1.78 2.60 3.83 20.000 1.50 1.32 1.21 2.00 -223.15 -0.14
41.061 1.07 1.18 1.24 1.89 2.87 3.95 41.061 1.49 1.32 1.22 5.00 -226.12 -0.14
59.091 1.08 1.18 1.24 1.83 2.55 3.65 59.091 1.51 1.36 1.25 10.00 -228.13 -0.13
100.000 1.08 1.18 1.24 1.74 2.50 3.42 100.000 1.56 1.39 1.29 20.00 -226.19 -0.13
149.240 1.09 1.18 1.25 1.76 2.48 3.50 149.240 1.66 1.44 1.34 40.47 -224.88 -0.12
200.000 1.10 1.18 1.24 1.78 2.46 3.33 200.000 1.78 1.51 1.41 60.45 -225.86 -0.11
239.390 1.12 1.19 1.25 1.79 2.48 3.36 239.390 1.89 1.60 1.49 100.00 -229.17 -0.07
257.420 1.13 1.19 1.25 1.79 2.51 3.36 257.420 1.95 1.61 1.50 140.38 -233.40 0.00
275.450 1.15 1.20 1.27 1.82 2.49 3.35 275.450 2.00 1.75 1.63 200.00 -229.89 0.10
311.520 1.18 1.23 1.31 1.83 2.50 3.24 311.520 1.94 1.94 1.80 240.30 -234.97 0.11
347.580 1.23 1.28 1.35 1.89 2.51 3.21 347.580 2.25 2.02 1.87 280.26 -236.33 0.34
365.610 1.26 1.31 1.38 1.92 2.58 3.26 365.610 2.31 2.07 1.92 360.19 -211.20 0.48
401.670 1.32 1.36 1.44 1.96 2.63 3.30 401.670 2.42 2.18 2.02 400.16 -197.76 0.52
455.760 1.41 1.49 1.58 2.03 2.66 3.42 455.760 2.61 2.40 2.21 480.09 -211.70 0.79
500.000 1.50 1.52 1.61 2.19 2.72 3.45 500.000 2.76 2.42 2.25 500.08 -209.44 1.00
545.910 1.55 1.61 1.69 2.32 2.90 3.70 545.910 2.82 2.51 2.36 540.04 -192.55 1.09
581.970 1.58 1.66 1.73 2.45 3.09 3.90 581.970 2.87 2.58 2.42 580.01 -170.60 1.36
600.000 1.58 1.67 1.73 2.45 3.11 3.91 600.000 2.85 2.57 2.41 600.00 -164.18 1.25
Click Above for Actual Performance Data.
Back
http://www.minicircuits.com/cgi-bin/spec?cat=mixer&model=TAK-6R&pix=a05.gif&bv=4 (2 of 2) [7/9/2004 9:45:37 PM]
i2 Technologies US, Inc.
HTML Pages converted to PDF Document
This document contain component information from the
manufacturer's website which are not available in a revision
controlled document from the manufacturer. To facilitate the
addition of these parts into the Electronics Database, we are
converting the HTML pages related to that part, from the
manufacturer's website into Adobe PDF format. The contents of this
document is based on the information provided on the
manufacturer's website, therefore the information may have been
changed by the manufacturer since this was created.
Powering the Bottom Line ®
i2 Technologies US, Inc.
15445 Innovation Drive
San Diego, CA 92128
