CPH5503
No.6918-1/4
Applications
•Relay drivers, lamp drivers, motor drivers, strobes.
Features
•Composite type with two NPN transistors contained in
one package facilitating high-density mounting.
•The two chips contained are equivalent to the
CPH3209.
•Ultrasmall package permitting applied sets to be made
small and slim.(0.9mm)
Specifications
Absolute Maximum Ratings at Ta=25°C
Parameter Symbol Conditions Ratings Unit
Collector-to-Base Voltage VCBO 40 V
Collector-to-Emitter Voltage VCEO 30 V
Emitter-to-Base Voltage VEBO 5V
Collector Current IC3A
Collector Current (Pulse) ICP 5A
Collector Dissipation PCMounted on a ceramic board (600mm2✕0.8mm) 0.9 W
Total Dissipation PTMounted on a ceramic board (600mm2✕0.8mm) 1.2 W
Junction Temperature Tj 150 °C
Storage Temperature Tstg --55 to +150 °C
Electrical Characteristics at Ta=25°C
Ratings
Parameter Symbol Conditions min typ max Unit
Collector Cutoff Current ICBO VCB=30V, IE=0 0.1 µA
Emitter Cutoff Current IEBO VEB=4V, IC=0 0.1 µA
DC Current Gain hFE VCE=2V, IC=500mA 200 560
Gain-Bandwidth Product fTVCE=10V, IC=500mA 450 MHz
Output Capacitance Cob VCB=10V, f=1MHz 20 pF
Marking : EC Continued on next page.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
Ordering number : ENN6918A
CPH5503
Package Dimensions
unit : mm
2162
[CPH5503]
GI IM
NPN Epitaxial Planar Silicon Transistor
DC / DC Converter Applications
D0301 TS IM TA-3530 / 22001 TS IM TA-3127
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft's
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
1 : Collector(TR1)
2 : Collector(TR2)
3 : Base(TR2)
4 : Emitter Common
5 : Base(TR1)
SANYO : CPH5
1.6 0.60.6 2.8
0.2
2.9
0.05
0.40.95
0.2
0.9
0.7
0.15
0.4
12
345
CPH5503
No.6918-2/4
VRRB
VCC=12VVBE= --5V
++
50Ω
INPUT
OUTPUT
RL
24Ω
100µF 470µF
PW=20µsIB1
D.C.≤1% IB2
IC=20IB1= --20IB2=500mA
Continued from preceding page.
Ratings
Parameter Symbol Conditions min typ max Unit
Collector-to-Emitter Saturation Voltage VCE(sat) IC=1.5A, IB=30mA 120 180 mV
IC=3A, IB=60mA 220 330 mV
Base-to-Emitter Saturation Voltage VBE(sat) IC=1.5A, IB=30mA 0.85 1.2 V
Collector-to-Base Breakdown Voltage V(BR)CBO IC=10µA, IE=0 40 V
Collector-to-Emitter Breakdown Voltage V(BR)CEO IC=1mA, RBE=∞30 V
Emitter-to-Base Breakdown Voltage V(BR)EBO IE=10µA, IC=0 5 V
T urn-ON T ime ton See specified Test Circuit 30 ns
Storage T ime tstg See specified Test Circuit 300 ns
Fall T ime tfSee specified Test Circuit 15 ns
Switching T ime Test Circuit Electrical Connection
B1 EC B2
C1 C2
IC -- VCE
Collector-to-Emitter Voltage, VCE -- mV
Collector Current, IC -- A
Base-to-Emitter Voltage, VBE -- V
IC -- VBE
Collector Current, IC -- A
Collector Current, IC -- A
hFE -- IC
DC Current Gain, hFE
00 200 400 600 800 1000
IB=0
0.4
1.2
0.8
2.0
1.6
3.0
1.5
1.0
2.5
2.0
0.5
00 0.2 0.4 0.6 0.8 1.0
VCE=2V
25°C
IT03042 IT03043
8.0mA
10mA
50mA
2.0mA
20mA
4.0mA
6.0mA
100 2357
0.01 0.1 2357
1.0 2357
10
2
3
5
7
1000
--25°C
Ta=75°C
IT03044
VCE=2V
25°C
30mA
40mA
--25°C
Ta=75°C
23 57
0.01 0.1
23 57 1.0 23 57
10
0.001
0.1
0.01
7
5
3
2
7
5
3
2
7
5
3
2
1.0
IT03047
IC / IB=20
--25
°C
Ta=75°C
25°C
Collector Current, IC -- A
VCE(sat) -- IC
Collector-to-Emitter
Saturation Voltage, VCE(sat) -- V
CPH5503
No.6918-3/4
23 5 23 57
1.0 10
7
5
3
2
100
10
IT03046
f=1MHz
23 57 23 5723 57
0.01 0.1 1.0 10
0.01
0.1
7
5
3
2
1.0
7
5
3
2
10
7
5
3
2
IT03048
--25
°C
25°C
IC / IB=50
Ta=75°C
0.01 0.1
23 57 1.0
23 57 10
23 57
0.1
1.0
7
5
3
2
10
5
7
3
2
IT03049
IC / IB=50
Ta= --25°C
75°C
25°C
0.01
0.1
1.0
2
3
5
7
2
3
5
7
2
3
5
7
10
2 3 57 2 3 57 2 3 5
0.1 1.0 10 IT03050
1ms
DC operation
10ms
ICP=5A
IC=3A
100ms
100µs
500µs
0
0.2
0.4
0.6
0.8
1.0
0.9
1.2
1.4
0 20 40 60 80 100 120 140 160
IT03051
0
0.4
0.3
0.2
0.1
0.5
0.6
0.8
0.7
0.9
1.0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
IT03052
Collector-to-Base Voltage, VCB -- V
Cob -- VCB
Output Capacitance, Cob -- pF
Collector Current, IC -- A
VCE(sat) -- IC
Collector-to-Emitter
Saturation Voltage, VCE(sat) -- V
Collector Current, IC -- A
VBE(sat) -- IC
Base-to-Emitter
Saturation Voltage, VBE(sat) -- V
Ambient Temperature, Ta -- °C
PC -- Ta
Collector Dissipation, PC -- W
Collector-to-Emitter Voltage, VCE -- V
A S O
Collector Current, IC -- A
Ta=25°C
Single pulse
Mounted on a ceramic board(600mm
2
✕0.8mm) 1unit
Total Dissipation
1unit
Mounted on a ceramic board(600mm2
✕
0.8mm)
Collector Dissipation, PC(TR1) -- W
PC(TR2) -- PC(TR1)
Collector Dissipation, PC(TR2) -- W
Mounted on a ceramic board(600mm2
✕
0.8mm)
Collector Current, IC -- mA
fT -- IC
Gain-Bandwidth Product, fT -- MHz
100
5
7
3
1000
5
7
3
2
23 57 23 2357
10 100 1000 IT03045
VCE=10V
CPH5503
No.6918-4/4
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be expor ted without obtaining the export license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of December, 2001. Specifications and information herein are subject
to change without notice.
PS
