NES-150 150W Single Output Switching Power Supply series Features : *AC input range selectable by switch *Protections: Short circuit / Overload / Over voltage *Cooling by free air convection *LED indicator for power on *100% full load burn-in test *High efficiency, long life and high reliability *2 years warranty .. SPECIFICATION MODEL OUTPUT INPUT NES-150-3.3 NES-150-5 NES-150-7.5 NES-150-9 NES-150-12 NES-150-15 NES-150-24 NES-150-48 DC VOLTAGE 3.3V 5V 7.5V 9V 12V 15V 24V 48V RATED CURRENT 30A 26A 20A 16.7A 12.5A 10A 6.5A 3.3A CURRENT RANGE 0 ~ 30A 0 ~ 26A 0 ~ 20A 0 ~ 16.7A 0 ~ 12.5A 0 ~ 10A 0 ~ 6.5A 0 ~ 3.3A RATED POWER 99W 130W 150W 150W 150W 150W 156W 158.4W RIPPLE & NOISE (max.) Note.2 80mVp-p 80mVp-p 120mVp-p 120mVp-p 120mVp-p 120mVp-p 120mVp-p 200mVp-p VOLTAGE ADJ. RANGE 3.2 ~ 3.5V VOLTAGE TOLERANCE Note.3 3.0% 4.75 ~ 5.5V 2.0% 7.13 ~ 8.3V 1.0% 8.55 ~ 9.9V 1.0% 11.4 ~ 13.5V 1.0% 14.25 ~ 16.5V 22.8 ~ 27.6V 1.0% 1.0% 45.6 ~ 52.8V 1.0% LINE REGULATION Note.4 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION Note.5 2.0% 1.0% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% SETUP, RISE TIME Note.8 800ms, 20ms/230VAC 83% 86% 86% 1200ms, 30ms/115VAC at full load HOLD UP TIME (Typ.) 24ms/230VAC VOLTAGE RANGE 90 ~ 132VAC / 180 ~ 264VAC selected by switch FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 73% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 3A/115VAC 2A/230VAC COLD START 45A/230VAC LEAKAGE CURRENT OVERLOAD PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT 20ms/115VAC at full load 78% 80% 254 ~ 373VDC 83% 83% <2mA / 240VAC 110 ~ 150% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 3.8 ~ 4.65V 5.75 ~ 6.75V 8.6 ~ 10.1V 10.4 ~ 12.2V 13.8 ~ 16.2V 17.25 ~ 20.25V 27.6 ~ 32.4V Protection type : Hiccup mode, recovers automatically after fault condition is removed 55.2 ~ 64.8V -20 ~ +60 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -40 ~ +85, 10 ~ 95% RH 0.03%/ (0 ~ 50) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes VIBRATION SAFETY STANDARDS Note.6 UL60950-1, TUV EN60950-1,GB4943.1:2011 approved SAFETY & EMC (Note 7) OTHERS WITHSTAND VOLTAGE I/P-FG:2KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC 70% RH EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B,GB9254 CLASS B Compliance to EN61000-3-2,-3,GB17625.1 HARMONIC CURRENT EMS IMMUNITY Compliance to EN61000-4-2, 3, 4, 5, 6, 8,11, ENV50204, EN55024, EN61000-6-1, heavy industry level, criteria A MTBF 433.3Khrs min. MIL-HDBK-217F (25) 199*98*38mm (L*W*H) 0.7Kg; 20pcs/15Kg/0.72CUFT DIMENSION PACKING NOTE I/P-O/P:3KVAC ISOLATION RESISTANCE 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% to 100% rated load. 6. For the request of GB4943.1,the power supply is only suitable for use in the altitude 2000m below and the non tropical climate condition. 7. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com) 8. Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quickly may lead to increase of the set up time. File Name:NES-150-SPEC 2012-09-24 NES-150 150W Single Output Switching Power Supply Mechanical Specification Case No. 902 series Unit:mm 7 3.5 9 12 197 1 9.5 2 98 80 4 85.5 3 8.2 5 6 7 3.5 4- +V ADJ. M 3 57.5 4.5 120 199 190 Terminal Pin No. Assignment 3.5 38 3 28.5 3-M 18 3.5 18 9 9.5 6.5 Pin No. 1 2 3 Assignment AC/L AC/N FG Pin No. Assignment DC OUTPUT -V 4,5 6,7 DC OUTPUT +V 157 22 Block Diagram fosc : 65KHz 230 115 RECTIFIERS & FILTER EMI FILTER I/P POWER SWITCHING RECTIFIERS & FILTER -V DETECTION CIRCUIT FG O.L.P. +V PWM CONTROL O.V.P. Derating Curve Static Characteristics Ta=25 100 Others 100 85 80 3.3V,5V 55 7.5V,9V LOAD (%) LOAD (%) 60 70 40 20 -20 0 10 20 30 40 50 AMBIENT TEMPERATURE () 60 70 (HORIZONTAL) 40 25 90 180 100 200 110 220 115 230 125 250 132 264 INPUT VOLTAGE (VAC) 60Hz File Name:NES-150-SPEC 2012-09-24 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Mean Well: NES150-24 NES-150-48 NES-150-12 NES-150-15 NES-150-5 NES-150-7.5 NES-150-9