43
SSL - Discrete Wire IDC
Series 9176
The 917X series of surface mount Insulation Displacement Connectors (IDC)
were developed to meet the harsh automotive and industrial market
applications for connecting individual wires directly to a PCB ranging from 14
AWG to 28 AWG. This industry proven contact system has been tested to
automotive levels of shock, vibration, and temperature cycling to prove their
reliability and robustness. The simplicity of inserting a wire into the connector
with a small tool allows a wide range of devices to be connected to the PCB
without soldering. In SSL applications specifically, these connectors are used to
bring power and signal onto the PCB or are used to daisy chain multiple boards
together in a long string. While the IDC contact provides a gas-tight connection
to conductor of the wire, the housing has been designed to grab the insulation
of the wire to provide a positive strain relief even in the harshest conditions. In
case of repair, the wires can be removed and replace up to three times.
The 9176 series accepts 18 AWG to 24 AWG wires with an insulation diameter
ranging from 1.1mm to 2.1mm. These dual contact connectors support a 10
amp current rating with two large SMT solder tails per wire to provide maximum
stability on the PCB. Available in 1p-3p configuration, these connectors can be
end stackable for higher pin counts. The 9176 series also comes with optional
locking strain relief caps that act as the termination tool for severe vibration
applications.
ELECTRICAL
• Current Rating: 10 Amp / Contact
• Voltage Rating: 250 VAC
9176
Series
00
Prefix
00X
Number of Ways
06
Plating
Option
06 = Pure Tin
all over
HOW TO ORDER
X
Insulator Color
00X
Wire Gauge Size
Code Color Application
0 Black Industrial
1 White Lighting
ENVIRONMENTAL
• Operating Temperature:
-40ºC to +125ºC
MECHANICAL
• Insulator Material: Nylon 46: UL94V0
• Contact Material: Phosphor Bronze
• Plating: Tin over Nickel
• Durability: 3 Cycles
FEATURES AND BENEFITS
• IDC contact provides a gas-tight connection to the PCB for long term reliability
•
Connector housing captures the wire insulation for positive strain relief
•
Tested to automotive levels on shock, vibration and temperature cycling for
reliability
•
Low and high volume assembly tools to match production volumes
•
Reduced total applied cost versus solder or crimp processes
•
Optional thru and end caps lock in place to provide maximum strain relief
•
High temperature insulator capable to 260ºC reflow soldering processes
APPLICATIONS
• Connecting discrete wire components
directly to the PCB
• Bringing power and signals onto a PCB
• Daisy chaining PCB’s together to create
a continuous string of boards
• Application Notes: refer to 201-01-124
Code No of Details
Ways
001 1 Page 44
002 2 Page 45
003 3 Page 46
Code Accepted Wire Cap Code
Wire Gauge Insulation
Pages 47-48
001 18 Gauge Stranded Ø 1.6-2.1 021
011 20 Gauge Stranded Ø 1.6-2.1 021
022 22 Gauge Stranded Ø 1.1-1.6 016
032 24 Gauge Stranded Ø 1.1-1.6 016
Certification: UL File #E320991
44
SSL - Discrete Wire IDC
Series 9176
18-24 AWG 1 WAY IDC CONNECTOR
NOTES:
1. CONNECTOR FOR IDC WIRE TO BOARD CONNECTION.
2. CONTACT MATERIAL: PHOSPHORE BRONZE.
INSULATION MATERIAL: HIGH TEMPERATURE NYLON 46.
COLOR REFER TO PAGE 43.
3. CONNECTOR DESIGNED TO ACCEPT BETWEEN 24 AND 18 GAUGE
STRANDED WIRE.
4. ALL DIMENSIONS FOR REFERENCE UNLESS OTHERWISE STATED.
5. FOR FULL PRODUCT SPECIFICATION REFER TO ELCO SPEC 201-01-106 AND
APPLICATION NOTES 201-01-124.
6. FOR PCB SPACE RESTRICTED BY WIRE ASSEMBLY TOOLING REFER TO PAGE 47.
7. FOR HAND WIRE ASSEMBLY TOOLING REFER TO PAGE 49.
PACKING DETAILS
REEL QTY 1000
LEADER 480MM
TRAILER 120MM
SMT PCB LAYOUT
PURE TIN PADS
Code Accepted A Wire B
Wire Gauge Insulation
001 18 Gauge Stranded 0.72 Ø 1.6-2.1 2.1
011 20 Gauge Stranded 0.60 Ø 1.6-2.1 2.1
022 22 Gauge Stranded 0.47 Ø 1.1-1.6 1.6
032 24 Gauge Stranded 0.37 Ø 1.1-1.6 1.6
45
SSL - Discrete Wire IDC
Series 9176
18-24 AWG 2 WAY IDC CONNECTOR
PACKING DETAILS
REEL QTY 1000
LEADER 480MM
TRAILER 120MM
SMT PCB LAYOUT
PURE TIN PADS
Code Accepted A Wire B
Wire Gauge Insulation
001 18 Gauge Stranded 0.72 Ø 1.6-2.1 2.1
011 20 Gauge Stranded 0.60 Ø 1.6-2.1 2.1
022 22 Gauge Stranded 0.47 Ø 1.1-1.6 1.6
032 24 Gauge Stranded 0.37 Ø 1.1-1.6 1.6
NOTES:
1. CONNECTOR FOR IDC WIRE TO BOARD CONNECTION.
2. CONTACT MATERIAL: PHOSPHORE BRONZE.
INSULATION MATERIAL: HIGH TEMPERATURE NYLON 46.
COLOR REFER TO PAGE 43.
3. CONNECTOR DESIGNED TO ACCEPT BETWEEN 24 AND 18 GAUGE STRANDED WIRE.
4. ALL DIMENSIONS FOR REFERENCE UNLESS OTHERWISE STATED.
5. FOR FULL PRODUCT SPECIFICATION REFER TO ELCO SPEC 201-01-106 AND APPLICATION
NOTES 201-01-124.
6. FOR PCB SPACE RESTRICTED BY WIRE ASSEMBLY TOOLING REFER TO PAGE 47.
7. FOR HAND WIRE ASSEMBLY TOOLING REFER TO PAGE 49
8. FOR PRESS WIRE ASSEMBLY TOOLING REFER TO PAGE 50.
9. FOR ACCESSORY CAPS REFER TO PAGES 47 AND 48.
46
SSL - Discrete Wire IDC
Series 9176
18-24 AWG 3 WAY IDC CONNECTOR
PACKING DETAILS
REEL QTY 1000
LEADER 480MM
TRAILER 120MM
SMT PCB LAYOUT
PURE TIN PADS
Code Accepted A Wire B
Wire Gauge Insulation
001 18 Gauge Stranded 0.72 Ø 1.6-2.1 2.1
011 20 Gauge Stranded 0.60 Ø 1.6-2.1 2.1
022 22 Gauge Stranded 0.47 Ø 1.1-1.6 1.6
032 24 Gauge Stranded 0.37 Ø 1.1-1.6 1.6
NOTES:
1. CONNECTOR FOR IDC WIRE TO BOARD CONNECTION.
2. CONTACT MATERIAL: PHOSPHORE BRONZE.
INSULATION MATERIAL: HIGH TEMPERATURE NYLON 46.
COLOR REFER TO PAGE 43.
3. CONNECTOR DESIGNED TO ACCEPT BETWEEN 24 AND 18 GAUGE STRANDED WIRE.
4. ALL DIMENSIONS FOR REFERENCE UNLESS OTHERWISE STATED.
5. FOR FULL PRODUCT SPECIFICATION REFER TO ELCO SPEC 201-01-106 AND APPLICATION
NOTES 201-01-124.
6. FOR PCB SPACE RESTRICTED BY WIRE ASSEMBLY TOOLING REFER TO PAGE 47.
7. FOR HAND WIRE ASSEMBLY TOOLING REFER TO PAGE 49
8. FOR PRESS WIRE ASSEMBLY TOOLING REFER TO PAGE 50.
9. FOR ACCESSORY CAPS REFER TO PAGES 47 AND 48.
47
Code Slot A (AWG) Diameter B Text
016 1.60 (22-24) 1.00 9176 Ø1.6
021 2.10 (18-20) 1.50 9176 Ø2.1
Color X00
Black 000
White 100
NOTES:
1. CAP FOR IDC WIRE TO BOARD CONNECTION, 2 AND 3 WAY,
THROUGH WIRE.
2. FOR USE WITH STANDARD 9176 IDC CONNECTORS, SEE
PAGE 43 FOR THE CORRECT PART CODE TO MATCH WIRE.
3. CAP MATERIAL: GLASS FILLED NYLON 46, FOR COLORS
SEE TABLE BELOW.
4. DIMENSIONS A, B AND TEXT, SEE TABLE BELOW.
5. CAPS DESIGNED TO ACCOMMODATE WIRE INSULATION
DIAMETERS 1.1MM TO 1.6MM AND 1.6MM TO 2.1MM.
6. ALL DIMENSIONS SHOWN ARE REFERENCE DIMENSIONS.
7. PACKED IN BAGS, 1000 PIECES PER BAG.
SSL - Discrete Wire IDC
Series 9176
60-9176-00X-0XX-X00
ACCESSORY CAP – THROUGH WIRE
48
Color X99
Black 099
White 199
NOTES:
1. CAP FOR IDC WIRE TO BOARD CONNECTION, 2 AND 3
WAY, WITH WIRE STOP.
2. FOR USE WITH STANDARD 9176 IDC CONNECTORS, SEE
PAGE 43 FOR THE CORRECT PART CODE TO MATCH WIRE.
3. CAP MATERIAL: GLASS FILLED NYLON 46, FOR COLORS
SEE TABLE BELOW.
4. DIMENSIONS A, B AND TEXT, SEE TABLE BELOW.
5. CAPS DESIGNED TO ACCOMMODATE WIRE INSULATION
DIAMETERS 1.1MM TO 1.6MM AND 1.6MM TO 2.1MM.
6. ALL DIMENSIONS SHOWN ARE REFERENCE DIMENSIONS.
7. PACKED IN BAGS, 1000 PIECES PER BAG.
SSL - Discrete Wire IDC
Series 9176
60-9176-00X-0XX-X99
ACCESSORY CAP – WIRE STOP
Code Slot A (AWG) Diameter B Text
016 1.60 (22-24) 1.00 9176 Ø1.6
021 2.10 (18-20) 1.50 9176 Ø2.1
49
SSL - Discrete Wire IDC
Series 9176
HAND INSERTION TOOLING
FOR SINGLE 18/24 GAUGE WIRE
CLEARANCE AREA ON PCB FOR HAND TOOLING
HIGH PRODUCTION
Metal
Max Tool
Insulation Dia Part Number
(AWG)
2.10 (18-20) 06 9176 7017 01 000
1.60 (22-24) 06 9176 7017 02 000
Max Tool
Insulation Dia Part Number
(AWG)
2.10 (18-20) 06 9176 7016 01 000
1.60 (22-24) 06 9176 7016 02 000
MED PRODUCTION
Metal/Plastic
UNIVERSAL HANDLE
Details Tool
Part Number
6.35 A/F HEX 06 7000 7730 01 000
BIT HOLDER
1 WAY 2 WAY 3 WAY
50
SSL - Discrete Wire IDC
Series 9176
INSERTION TOOLING
REQUIRES HAND PRESS WITH FLAT ROCK PLATES
HIGH PRODUCTION
Metal
No. Max Tool
of Ways Insulation Dia Part Number
(AWG)
22.10 (18-20) 06 9176 7017 01 002
1.60 (22-24) 06 9176 7017 02 002
32.10 (18-20) 06 9176 7017 01 003
1.60 (22-24) 06 9176 7017 02 003
2 WAY
2 WAY
3 WAY
3 WAY
NOTES:
1. DIMENSIONS SHOWN ARE REFERENCE DIMENSIONS.
2. MAXIMUM COMPONENT HEIGHT 1.00MM IN THIS AREA.
3. MAXIMUM COMPONENT HEIGHT 6.00MM IN THIS AREA.
4. THE SAME RESTRICTIONS APPLY TO ALL WIRE INSULATION DIAMETERS
5. 2 AND 3 WAY TOOLS ONLY, FOR USE UNDER HAND PRESS WITH FLAT PLATES.
6. FOR HAND TOOLING REFER TO PAGE 47.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
AVX:
009176003001006 009176002022006 069176701602000 009176002001006 069176701601000
009176002032006 009176002011006 009176003011006 009176003032006 009176003022006 009176001001006
009176001001106 009176001011006 009176001011106 009176001022006 009176001022106
009176001032006 009176001032106 069176701701000 069176701701002 069176701701003 069176701702000
069176701702002 069176701702003 009176002001106 009176002032106 009176002022106
009176003001106 009176002011106 009176003011106 009176003022106 009176003032106
