FUJITSU MEDIA DEVICE DATA SHEET DS04-23118-4E ASSP Mobile Communication Systems Piezoelectric SAW BPF (700 MHz to 1000 MHz) F5CE Series (D2 type) DESCRIPTION The F5CE-D2 series of SAW bandpass filters apply to the frequency range 700 MHz to 1000 MHz. These filters make it possible to provide high stop-band attenuation and excellent pass-band flatness due to using unique DMS (Double Mode SAW) technology as design method. Moreover, these filters are provided in small 3.0 mm sq. package. This contributes to reduce weight and size of mobile communication units. The F5CE-D2 series of SAW filters are suitable for interstage RF filter in mobile communication systems in the frequency range 700 MHz to 1000 MHz. Standard devices are available for AMPS/CDMA/TDMA, GSM, PDC800 and ISM900. FEATURES * * * * * * Excellent stop-band attenuation Low insertion loss and low pass-band ripple Ultra compact and light package (3.0 mm sq.) External matching circuits are not required. (50 I/O) Surface mount package (SMT) Standard devices are available for mobile communication standards (AMPS/CDMA/TDMA, GSM, PDC800 and ISM900) PACKAGE F5CE Series (D2 type) PIN ASSIGNMENT (BOTTOM VIEW) 1 2 3 6 5 4 PIN DESCRIPTION Pin no. Pin name Description 1 GND 2 IN 3 GND Ground Pin 4 GND Ground Pin 5 OUT Output Pin 6 GND Ground Pin Ground Pin Input Pin ABSOLUTE MAXIMUM RATINGS Parameter Symbol Rating Unit Min Max Ta -30 +85 C Tstg -40 +100 C Input power PIN +15 dBm Input DC voltage -5 +5 V Operating temperature Storage temperature WARNING: Piezoelectric devices can be permanently damaged by application of stress (voltage, current, temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings. 2 F5CE Series (D2 type) RECOMMENDED OPERATING CONDITION Parameter Value Symbol Operating temperature Ta Min Max -30 +85 Unit C WARNING: The recommended operating conditions are required in order to ensure the normal operation of the piezoelectric device. All of the device's electrical characteristics are warranted when the device is operated within these ranges. Always use piezoelectric devices within their recommended operating conditionranges. Operation outside these ranges may adversely affect reliability and could result in device failure. No warranty is made with respect to uses, operating conditions, or combinations not represented on the data sheet. Users considering application outside the listed conditions are advised to contact their FUJITSU representatives beforehand. STANDARD DEVICES Center frequency (MHz) Band width (MHz) Part symbol Tx 836.5 25 32 FAR-F5CE-836M50-D232 Rx 881.5 25 33 FAR-F5CE-881M50-D233 Tx 902.5 25 34 FAR-F5CE-902M50-D234 Rx 947.5 25 35 FAR-F5CE-947M50-D235 915.0 7 38 FAR-F5CE-915M00-D238 915.0 26 36 FAR-F5CE-915M00-D236 System AMPS/CDMA/TDMA GSM ISM900 Part number Remarks 3 F5CE Series (D2 type) ELECTRICAL CHARACTERISTICS AND TYPICAL FREQUENCY RESPONSE 1. AMPS/CDMA/TDMA (Tx) Part number : FAR-F5CE-836M50-D232 Parameter Conditions (Ta = -30 C to +85 C) Value Min Typ Max Unit Insertion loss 824 to 849 MHz 2.7 3.5 dB Pass-band ripple 824 to 849 MHz 0.9 1.6 dB DC to 800 MHz 50 66 dB 869 to 1049 MHz 28 33 dB 1049 to 1200 MHz 50 60 dB 1200 to 2000 MHz 45 50 dB 824 to 849 MHz (9.5) 1.8 (10.9) 2.0 (dB) Absolute stop-band attenuation Pass-band VSWR (Return loss) S21 log MAG 10 dB/ 1REF 0 dB 2 1 : -2.643 dB 824 MHz 2 : -2.7135 dB 849 MHz 3 : -60.88 dB 800 MHz 4 : -34.243 dB 869 MHz S11 1 U FS Remarks 1 : 39.861 0.0938 4 1 18.108 pF 824 MHz 2 : 84.996 -12.77 849 MHz 3 : 2.0156 -29.858 800 MHz 4 : 18.031 -140.37 869 MHz 2 3 4 CENTER 835 MHz S11 SWR SPAN 300 MHz 1 / 1 : 1.2555 REF 1 3 4 3 CENTER 835 MHz S22 1 U FS SPAN 300 MHz 1 : 40.059 2.375 824 MHz 2 : 1.7589 849 MHz 3 : 33.646 800 MHz 4 : 34.335 869 MHz 1 458.73 pF 824 MHz 2 : 84.547 -10.078 849 MHz 3 : 2.1123 -88.005 800 MHz 4 : 12.773 -134.22 869 MHz 2 4 1 3 2 CENTER 835 MHz 4 SPAN 300 MHz CENTER 835 MHz SPAN 300 MHz F5CE Series (D2 type) 2. AMPS/CDMA/TDMA (Rx) Part number : FAR-F5CE-881M50-D233 Parameter Conditions (Ta = -30 C to +85 C) Value Min Typ Max Unit Insertion loss 869 to 894 MHz 2.7 3.5 dB Pass-band ripple 869 to 894 MHz 0.9 1.6 dB DC to 779 MHz 50 63 dB 779 to 849 MHz 45 50 dB 914 to 970 MHz 28 33 dB 970 to 1049 MHz 50 60 dB 1049 to 2000 MHz 40 50 dB 869 to 894 MHz (9.5) 1.7 (11.7) 2.0 (dB) Absolute stop-band attenuation Pass-band VSWR (Return loss) S21 log MAG 10 dB/ 1REF 0 dB 2 1 : -2.6219 dB 869 MHz 2 : -2.7063 dB 894 MHz 3 : -62.398 dB 849 MHz 4 : -33.178 dB 914 MHz S11 1 U FS Remarks 1 : 48.748 -1.7109 4 1 107.05 pF 869 MHz 2 : 89.652 -9.0273 894 MHz 3 : 2.2881 -23.078 849 MHz 4 : 16.703 -149.05 914 MHz 2 3 4 3 CENTER 880 MHz S11 SWR SPAN 300 MHz 1 / REF 1 4 3 1 : 1.0512 869 MHz 2 : 1.8203 894 MHz 3 : 26.584 849 MHz 4 : 31.784 914 MHz CENTER 880 MHz S22 1 U FS SPAN 300 MHz 1 : 48.572 -660.16 m 277.43 pF 869 MHz 2 : 88.297 -7.6133 894 MHz 3 : 2..3965 -21.153 849 MHz 4 : 14.922 -139.78 914 MHz 1 2 4 1 CENTER 880 MHz 3 2 SPAN 300 MHz CENTER 880 MHz SPAN 300 MHz 5 F5CE Series (D2 type) 3. GSM (Tx) Part number : FAR-F5CE-902M50-D234 Parameter Conditions (Ta = -30 C to +85 C) Value Min Typ Max Unit Insertion loss 890 to 915 MHz 2.8 3.3 dB Pass-band ripple 890 to 915 MHz 0.8 1.4 dB DC to 845 MHz 50 60 dB 845 to 870 MHz 45 50 dB 925 to 935 MHz 5 18 dB 935 to 980 MHz 28 33 dB 980 to 1200 MHz 50 60 dB 1200 to 3000 MHz 30 40 dB 890 to 915 MHz (9.0) 1.7 (11.7) 2.1 (dB) Absolute stop-band attenuation Pass-band VSWR (Return loss) S21 log MAG 10 dB/ 1 REF 0 dB 2 4 1 : -2.705 dB 890 MHz 2 : -2.512 dB 915 MHz 3 : -60.125 dB 869 MHz 4 : -32.472 dB 935 MHz 5 : -63.11 dB 980 MHz S11 1 U FS Remarks 1 : 54.355 -3.2813 1 2 3 54.499 pF 890 MHz 2 : 73.234 -8.75 915 MHz 3 : 2.377 -21.645 869 MHz 4 : 16.141 -154.23 935 MHz 5 : 9.9835 -71.762 980 MHz 5 4 3 5 CENTER 900 MHz S11 SWR SPAN 300 MHz 1 / 1 : 1.1118 REF 1 4 3 CENTER 900 MHz S22 1 U FS SPAN 300 MHz 1 : 54.16 -2.3867 5 890 MHz 2 : 1.5029 915 MHz 3 : 25.029 869 MHz 4 : 32.898 935 MHz 5 : 15.535 980 MHz 1 2 4 3 1 CENTER 900 MHz 6 2 74.925 pF 890 MHz 2 : 72.748 -8.6719 915 MHz 3 : 2.3945 -20.338 869 MHz 4 : 14.781 -143.07 935 MHz 5 : 9.7883 -88.281 980 MHz 5 SPAN 300 MHz CENTER 900 MHz SPAN 300 MHz F5CE Series (D2 type) 4. GSM (Rx) Part number : FAR-F5CE-947M50-D235 Parameter Conditions (Ta = -30 C to +85 C) Value Min Typ Max Unit Insertion loss 935 to 960 MHz 2.7 3.3 dB Pass-band ripple 935 to 960 MHz 0.7 1.4 dB DC to 871 MHz 50 66 dB 890 to 915 MHz 30 40 dB 980 to 1025 MHz 25 34 dB 1025 to 2000 MHz 45 48 dB 2000 to 3000 MHz 30 33 dB 935 to 960 MHz (9.0) 1.9 (10.2) 2.1 (dB) Absolute stop-band attenuation Pass-band VSWR (Return loss) S21 log MAG 10 dB/1 REF 0 dB 2 4 1 : -2.838 dB 935 MHz 2 : -2.811 dB 960 MHz 3 : -43.265 dB 915 MHz 4 : -31.174 dB 980 MHz 5 : -62.902 dB 1025 MHz 1 U FS S11 Remarks 1 : 48.096 -11.426 3 1 2 14.898 pF 935 MHz 2 : 87.012 -15.473 960 MHz 3 : 3.3154 -11.977 915 MHz 4 : 12.32 -135.31 980 MHz 5 : 8.1797 -65.523 1025 MHz 5 3 4 5 CENTER 950 MHz S11 SWR SPAN 300 MHz 1 / 1 : 1.2585 REF 1 4 3 CENTER 950 MHz S22 1 U FS SPAN 300 MHz 1 : 46.922 -11.199 5 935 MHz 2 : 1.8212 960 MHz 3 : 16.035 915 MHz 4 : 33.99 980 MHz 5 : 16.709 1025 MHz 1 2 15.199 pF 935 MHz 2 : 86.348 -15.438 960 MHz 3 : 3.269 -11.102 915 MHz 4 : 12.32 -133.48 980 MHz 5 : 8.2369 -63.543 1025 MHz 3 4 1 2 CENTER 950 MHz 5 SPAN 300 MHz CENTER 950 MHz SPAN 300 MHz 7 F5CE Series (D2 type) 5. ISM900 (7 MHz Bandwidth) Part number : FAR-F5CE-915M00-D238 Parameter Conditions (Ta = -30 C to +85 C) Value Min Typ Max Unit Insertion loss 911.5 to 918.5 MHz 3.2 3.5 dB Pass-band ripple 911.5 to 918.5 MHz 0.3 1.0 dB DC to 600 MHz 50 66 dB 600 to 840 MHz 40 35 dB 869 to 894 MHz 35 40 dB 970 to 1500 MHz 40 45 dB 1500 to 3000 MHz 25 28 dB 911.5 to 918.5 MHz (9.5) 1.8 (10.9) 2.0 (dB) Absolute stop-band attenuation Pass-band VSWR (Return loss) S21 log MAG 10 dB/ 1 REF 0 dB 2 1 : -3.133 dB 912.5 MHz 2 : -3.011 dB 920.5 MHz S11 1 U FS Remarks 1 : 50.824 12.756 2.2248 pF 912.5 MHz 2 : 77.844 11 920.5 MHz 1 2 CENTER 915 MHz S11 SWR SPAN 300 MHz 1 / REF 1 1 : 1.2879 CENTER 915 MHz S22 1 U FS SPAN 300 MHz 1 : 50.184 13.977 912.5 MHz 2 : 1.6094 920.5 MHz 2.4377 pF 912.5 MHz 2 : 74.648 11.52 920.5 MHz 1 2 1 2 CENTER 915 MHz 8 SPAN 300 MHz CENTER 915 MHz SPAN 300 MHz F5CE Series (D2 type) 6. ISM900 (26 MHz Bandwidth) Part number : FAR-F5CE-915M00-D236 Parameter (Ta = -30 C to +85 C) Value Conditions Min Typ Max Unit Insertion loss 902 to 928 MHz 2.6 3.5 dB Pass-band ripple 902 to 928 MHz 0.9 2.0 dB DC to 800 MHz 50 70 dB 800 to 880 MHz 45 57 dB 950 to 1080 MHz 28 31 dB 1080 to 2000 MHz 45 60 dB 2000 to 3000 MHz 25 38 dB 902 to 928 MHz (8.1) 1.7 (11.7) 2.3 (dB) Absolute stop-band attenuation Pass-band VSWR (Return loss) S21 log MAG 10 dB/ 1 REF 0 dB 2 4 1 : -2.4997 dB 902 MHz S11 1U FS 1 : 42.717 Remarks -1.4512 121.59 pF 902 MHz 2 : 85.512 -8.3164 928 MHz 2 : -2.5671 dB 928 MHz 3 : -61.414 dB 880 MHz 4 : -33.762 dB 950 MHz 3 : 2.4141 -28.497 880 MHz 4 : 12.734 -135.52 950 MHz 1 2 3 4 SPAN 300 MHz CENTER 915 MHz S11 SWR 1/ REF 1 3 4 1 : 1.2013 902 MHz 3 CENTER 915 MHz S22 1U FS SPAN 300 MHz 1 : 42.037 -2.6191 67.368 pF 902 MHz 2 : 85.066 -10.973 928 MHz 2 : 1.7442 928 MHz 3 : 28.381 880 MHz 4 : 32.443 950 MHz 3 : 2.3496 -28.755 880 MHz 4 : 12.492 -132.72 950 MHz 1 2 4 1 2 CENTER 915 MHz SPAN 300 MHz 3 CENTER 915 MHz SPAN 300 MHz 9 F5CE Series (D2 type) MEASURING CIRCUIT 2 5 1 3 4 6 1 to 6 : Pin numbers PART NUMBER DESIGNATION [Designation example] FAR-F5CE- M (1) -D2 - (2) (3) (1) Frequency designation : Specify the nominal frequency in six alphanumeric characters. Enter M (for MHz) at the decimal point. Refer to "STANDARD DEVICES". [Example] (2) Serial number 836.5 MHz 836M50 : Specify a characters from 01 to 99. Refer to "STANDARD DEVICES". (3) Packing (Reeled tape) : Y : 1 k pcs/reel X : 5 k pcs/reel MARKING LOGO DATE CODE INDEX 10 PART SYMBOL LOT No. F5CE Series (D2 type) PACKAGE DIMENSION 1.2 Max 3.0 3.0 2-R 0.2 2 3 1.5 0.75 1 6 5 4 0.75 0.4 0.6 4-R 0.3 1.2 1.2 Dimensions in mm. 11 F5CE Series (D2 type) RECOMMENDED LAND PATTERN 1.5 3.0 0.75 0.95 3.0 0.2 0.75 1.5 0.70 1.20 1.20 Dimensions in mm. 12 F5CE Series (D2 type) PACKING 1. Reel Dimensions 9.5 0.5 1.5 Min 250 80 12.8 Min 20.2 Min R0.58 Type Volume Y 1 k pcs X 5 k pcs 13.8 Max Dimensions in mm. 2. Packing Style Reel side Pulling side 1PIN Pulling side 13 F5CE Series (D2 type) 3. Tape Dimensions 0.3 0.05 0.1 3.3 0.1 3.5 0.05 1.5 0.0 1.0 Min 3.3 0.1 8.0 0.2 2.0 0.05 1.75 0.1 4.0 0.1 1.3 0.1 4.0 0.1 Dimensions in mm. 4. Peel strength of top cover tape Peel off by the force of 0.1 N to 1.0 N under the condition at the right. (Conforms to EIA) Direction of pulling Speed 300 mm/min 165 to 180 Embossment carrier type tape 14 F5CE Series (D2 type) RECOMMENDED REFLOW PROFILE 240 Temperature (C) 10 s Heating rate 1 C/s to 4 C/s 210 Air cooling 60 s Pre-Heating 150 60 s 90 s Time (s) NOTE A mass-produced product order is accepted by a unit of 1000. 15 F5CE Series (D2 type) FUJITSU MEDIA DEVICES LIMITED All Rights Reserved. The contents of this document are subject to change without notice. Customers are advised to consult with FUJITSU MEDIA DEVICES sales representatives before ordering. The information, such as descriptions of function and application circuit examples, in this document are presented solely for the purpose of reference to show examples of operations and uses of FUJITSU MEDIA DEVICES electronic device; FUJITSU MEDIA DEVICES does not warrant proper operation of the device with respect to use based on such information. When you develop equipment incorporating the device based on such information, you must assume any responsibility arising out of such use of the information. FUJITSU MEDIA DEVICES assumes no liability for any damages whatsoever arising out of the use of the information. Any information in this document, including descriptions of function and schematic diagrams, shall not be construed as license of the use or exercise of any intellectual property right, such as patent right or copyright, or any other right of FUJITSU MEDIA DEVICES or any third party or does FUJITSU MEDIA DEVICES warrant non-infringement of any third-party's intellectual property right or other right by using such information. FUJITSU MEDIA DEVICES assumes no liability for any infringement of the intellectual property rights or other rights of third parties which would result from the use of information contained herein. The products described in this document are designed, and manufactured as contemplated for general use, including without limitation, ordinary industrial use, general office use, personal use, and household use, but are not designed, developed and manufactured as contemplated (1) for use accompanying fatal risks or dangers that, unless extremely high safety is secured, could have a serious effect to the public, and could lead directly to death, personal injury, severe physical damage or other loss (i.e., nuclear reaction control in nuclear facility, aircraft flight control, air traffic control, mass transport control, medical life support system, missile launch control in weapon system), or (2) for use requiring extremely high reliability (i.e., submersible repeater and artificial satellite). Please note that FUJITSU MEDIA DEVICES will not be liable against you and/or any third party for any claims or damages arising in connection with above-mentioned uses of the products. Any electronic devices have inherently a certain rate of failure. You must protect against injury, damage or loss from such failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of over-current levels and other abnormal operating conditions. If any products described in this document represent goods or technologies subject to certain restrictions on export under the Foreign Exchange and Foreign Trade Control Law of Japan, the prior authorization by Japanese government should be required for export of those products from Japan. F0308 FUJITSU LIMITED Printed in Japan