ZMY 1...ZMY 200 (1.3 W) Surface mount Silicon-Zener Diodes (non-planar technology) Flachendiffundierte Si-Zener-Dioden fur die Oberflachenmontage Version 2004-05-13 1.3 W 0.5 0.5 Nominal Z-voltage - Nominale Z-Spannung Type Typ 5.0 2.5 Maximum power dissipation Maximale Verlustleistung Plastic case MELF Kunststoffgehause MELF 1...200 V DO-213AB Weight approx. - Gewicht ca. 0.12 g Plastic material has UL classification 94V-0 Gehausematerial UL94V-0 klassifiziert Dimensions / Mae in mm Standard packaging taped and reeled Standard Lieferform gegurtet auf Rolle see page 18 siehe Seite 18 Standard Zener voltage tolerance is graded to the international E 24 (~5%) standard. Other voltage tolerances and higher Zener voltages on request. Die Toleranz der Zener-Spannung ist in der Standard-Ausfuhrung gestuft nach der internationalen Reihe E 24 (~5%). Andere Toleranzen oder hohere Arbeitsspannungen auf Anfrage. Advantages of non-planar Zener-Diodes: Improved clamping capability Increased max. zener current IZmax Chips produced with Plasma-EPOS technology Molded plastic over passivated junction Vorteile der flachendiffundierten Zener-Dioden: Hohe Impulsfestigkeit Hoher max. Arbeitsstrom IZmax Chips hergestellt in Plasma-EPOS-Technologie Passivierte Chips im Plastik-Gehause Maximum ratings and Characteristics Grenz- und Kennwerte Power dissipation - Verlustleistung TA = 50C Ptot Non repetitive peak power dissipation, t < 10 ms Einmalige Impuls-Verlustleistung, t < 10 ms TA = 25C PZSM 1.3 W 1) 40 W Operating junction temperature - Sperrschichttemperatur Storage temperature - Lagerungstemperatur Tj TS Thermal resistance junction to ambient air Warmewiderstand Sperrschicht - umgebende Luft RthA < 45 K/W 1) Thermal resistance junction to terminal Warmewiderstand Sperrschicht - Kontaktflache RthT < 10 K/W 1 - 50...+150C - 50...+175C ) Mounted on P.C. board with 50 mm2 copper pads at each terminal Montage auf Leiterplatte mit 50 mm2 Kupferbelag (Lotpad) an jedem Anschlu 2 ) Tested with pulses - Gemessen mit Impulsen 3 ) The ZMY 1 is a diode operated in forward. Hence, the index of all parameters should be "F" instead of "Z". The cathode, indicated by a white ring is to be connected to the negative pole. Die ZMY 1 ist eine in Durchla betriebene Si-Diode. Daher ist bei allen Kenn- und Grenzwerten der Index "F" anstatt "Z" zu setzten. Die durch den weien Ring gekennzeichnete Kathode ist mit dem Minuspol zu verbinden. 210 ZMY 1...ZMY 200 (1.3 W) Maximum ratings Type Typ ZMY 1 3) ZMY 3.9 ZMY 4.3 ZMY 4.7 ZMY 5.1 ZMY 5.6 ZMY 6.2 ZMY 6.8 ZMY 7.5 ZMY 8.2 ZMY 9.1 ZMY 10 ZMY 11 ZMY 12 ZMY 13 ZMY 15 ZMY 16 ZMY 18 ZMY 20 ZMY 22 ZMY 24 ZMY 27 ZMY 30 ZMY 33 ZMY 36 ZMY 39 ZMY 43 ZMY 47 ZMY 51 ZMY 56 ZMY 62 ZMY 68 ZMY 75 ZMY 82 ZMY 91 ZMY 100 ZMY 110 ZMY 120 ZMY 130 ZMY 150 ZMY 160 ZMY 180 ZMY 200 1 Grenzwerte 2 Zener voltage ) Zener-Sspanng.2) IZ = IZtest Vzmin [V] Vzmax 0.71 3.7 4.0 4.4 4.8 5.2 5.8 6.4 7.0 7.7 8.5 9.4 10.4 11.4 12.4 13.8 15.3 16.8 18.8 20.8 22.8 25.1 28 31 34 37 40 44 48 52 58 64 70 77 85 94 104 114 124 138 153 168 188 0.82 4.1 4.6 5.0 5.4 6.0 6.6 7.2 7.9 8.7 9.6 10.6 11.6 12.7 14.1 15.6 17.1 19.1 21.2 23.3 25.6 28.9 32 35 38 41 46 50 54 60 66 72 79 88 96 106 116 127 141 156 171 191 212 Test cur. Mestrom Iztest [mA] Dyn. resistance Diff. Widerst. Iztest / 1 kHz rzj [] 100 100 100 100 100 100 100 100 100 100 50 50 50 50 50 50 25 25 25 25 25 25 25 25 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 2.5 2.5 2.5 0.5 (<1) 4 (<7) 4 (<7) 4 (<7) 2 (<5) 1 (<3) 1 (<2) 1 (<2) 1 (<2) 1 (<2) 2 (<4) 2 (<4) 4 (<7) 4 (<7) 5 (<10) 5 (<10) 6 (<15) 6 (<15) 6 (<15) 6 (<15) 7 (<15) 7 (<15) 8 (<15) 8 (<15) 16 (<40) 20 (<40) 24 (<45) 24 (<45) 25 (<60) 25 (<60) 25 (<80) 25 (<80) 30 (<100) 30 (<100) 40 (<200) 60 (<200) 80 (<250) 80 (<250) 90 (<300) 100 (<300) 110 (<350) 120 (<350) 150 (<350) Temp. Coeffiz. of Z-voltage ...der Z-spanng. VZ [10-4 /C] -26...-16 -7...+2 -7...+3 -7...+4 -6...+5 -3...+5 -1...+6 0...+7 0...+7 +3...+8 +3...+8 +5...+9 +5...+10 +5...+10 +5...+10 +5...+10 +6...+11 +6...+11 +6...+11 +6...+11 +6...+11 +6...+11 +6...+11 +6...+11 +6...+11 +6...+11 +7...+12 +7...+12 +7...+12 +7...+12 +8...+13 +8...+13 +8...+13 +8...+13 +9...+13 +9...+13 +9...+13 +9...+13 +9...+13 +9...+13 +9...+13 +9...+13 +9...+13 Reverse volt. Sperrspanng. IR = 1 A VR [V] Z-current 1) Z-Strom 1) TA = 50C IZmax [mA] - - - - - > 1.5 > 1.5 >2 >2 > 3.5 > 3.5 >5 >5 >7 >7 > 10 > 10 > 10 > 10 > 12 > 12 > 14 > 14 > 17 > 17 > 20 > 20 > 24 > 24 > 28 > 28 > 34 > 34 > 41 > 41 > 50 > 50 > 60 > 60 > 75 > 75 > 90 > 90 1000 317 283 260 241 217 197 181 165 149 135 123 112 102 92 83 76 68 61 56 51 45 41 37 34 32 28 26 24 22 20 18 16 15 14 12 11 10 9 8 8 7 6 ) Notes see previous page - Funoten siehe vorhergehende Seite 211