EMC Components
July 2013
Chip Beads
For signal line
MMZ series
MMZ0402 0402[01005 inch]*
MMZ0603 0603[0201 inch]
MMZ1005 1005[0402 inch]
MMZ1608 1608[0603 inch]
MMZ2012 2012[0805 inch]
* Dimensions Code JIS[EIA]
(2/33)
001-01 / 20130722 / e9412_mmz.fm
EMC Components
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using these products.
The storage period is less than 12 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH
or less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.
A malfunction may occur due to magnetic interference.
Use a wrist band to discharge static electricity in your body through the grounding wire.
Do not expose the products to magnets or magnetic fields.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications
equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement
equipment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or
quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to
society, person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/Aviation equipment
(2) Transportation equipment (cars, electric trains, ships, etc.)
(3) Medical equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(7) Transportation control equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(13) Other applications that are not considered general-purpose
applications
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing
protection circuit/device or providing backup circuits in your equipment.
REMINDERS
(3/33)
001-01 / 20130722 / e9412_mmz.fm
• All specifications are subject to change without notice.
EMC Components
Chip Beads
For signal line
FEATURES
Noise reduction solution for general signal lines.
Lineup includes 5 sizes from 0402 to 2012.
Achieves various frequency characteristics by using 8 materials with different features.
Multilayer integration monolithic structure makes it highly reliable.
There is no directivity.
APPLICATION
Smart phones, tablets, portable memory audio devices, various modules, PCs, note PCs, TVs, STBs, Blu-ray recorders, DSCs, and
DVCs
Signal line noise removal for game machines, smart grids, industrial equipment, etc.
PART NUMBER CONSTRUCTION
OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT
Operating temperature range includes self-temperature rise.
The Storage temperature range is for after the circuit board is mounted.
Overview of the MMZ Series
MMZ 0402 S 121 C T □□□
Series name L×W×T Dimensions Material name Impedance Characteristic
type Packaging style Internal code
(mm) (:) at 100MHz
0402 0.4×0.2x0.2 A 121 120 C T Taping
0603 0.6×0.3x0.3 B A
1005 1.0×0.5x0.5 D B
1608 1.6×0.8x0.6 F H
1.6×0.8x0.8 Q
2012 2.0×1.25x0.85 R
S
Y
Type
Temperature range
Package quantity Individual weight
Operating
temperature
Storage
temperature
°C °C pieces/reel mg
MMZ0402 –55 to +125 –55 to +125 20,000 0.08
MMZ0603 –55 to +125 –55 to +125 15,000 0.3
MMZ1005 –55 to +125 –55 to +125 10,000 1
MMZ1608 t=0.6mm –55 to +125 –55 to +125 4,000 3
t=0.8mm –55 to +125 –55 to +125 4,000 4
MMZ2012 –55 to +125 –55 to +125 4,000 8
Product compatible with RoHS directive
Halogen-free
Compatible with lead-free solders
RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://www.tdk.co.jp/rohs/
Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm.
(4/33)
001-01 / 20130722 / e9412_mmz.fm
• All specifications are subject to change without notice.
EMC Components
Overview of the MMZ Series
RECOMMENDED REFLOW PROFILE
Preheating Soldering Peak
Temp. Time Temp. Time Temp. Time
T1 T2 t1 T3 t2 T4 t3
150°C 180°C 60 to 120s 230°C 30 to 60s 250 to 260°C 10s
Natural
cooling
t3
t1
Preheating
t2
Soldering
T3 T3
T4
T2
T1
t: Time
Peak
T: Temperature
(5/33)
001-01 / 20130722 / e9412_mmz.fm
• All specifications are subject to change without notice.
EMC Components
Overview of the MMZ Series
MATERIAL CHARACTERISTICS
B material: This type is perfectly suited for fast digital signals. By equalizing R components and X components that beads possess at a
frequency of 5MHz, it is able to suppress overshooting, undershooting and ringing of fast digital signals.
R material: For wide frequency applications calling for broad impedance characteristics. For digital signal line applications calling
requiring good waveform integrity. Impedance values selected for effectiveness at 10 to 200MHz.
S material: Standard type that features impedance characteristics similar to those of a typical ferrite core. For signal line applications in
which the blocking region is near 100MHz. Impedance values selected for effectiveness at 40 to 300MHz.
Y material: High frequency range type intended for the 100MHz region and above.
For signal line applications in which the signal frequency is far from the cutoff frequency. Impedance values selected for
effectiveness at 80 to 400MHz.
A material: This high-impedance product is based on the impedance frequency characteristics of our Y-material. The product offers
excellent impedance characteristics, which is greater than 2500:, in the vicinity of 100MHz range (MMZ1608A252B).
Q material: For high-band applications designed for 100MHz and above. Impedance values selected for effectiveness at 100 to 800MHz.
D material: For applications calling for low insertion loss at low frequencies and sharply increasing impedance at high frequencies.
Designed for high impedance at high frequencies (300MHz to 1GHz) for signal line applications.
F material: This new product inherits the characteristic of our D-material, namely its sharp impedance rise time, and its impedance peak
frequency has been shifted higher into range. The product offers excellent noise suppression from 600MHz to as high as in
the GHz range.
TYPICAL MATERIAL IMPEDANCE CHARACTERISTICS
MMZ0402 Type
MMZ0603 Type
MMZ1005 Type
MMZ1608 Type
MMZ2012 Type
0
400
100
200
300
500
10 100 1000
Frequency(MHz)
S
0
200
400
600
800
1000
1200
1400
1600
1800
2000
10 100 1000
Frequency(MHz)
S
D
F
Y
B
S
D
Y
0
200
400
600
800
1000
1200
1400
1600
1800
2000
10 100 1000
Frequency(MHz)
Impedance(Ω)
F
0
500
1000
1500
2000
2500
10 100 1000
Frequency(MHz)
Impedance(Ω)
B
RS
A
Y
Q
DF
0
500
1000
1500
2000
2500
10 100 1000
Frequency(MHz)
Impedance(Ω)
R
SD
Y
(6/33)
001-01 / 20130722 / e9412_mmz.fm
• All specifications are subject to change without notice.
EMC Components
MMZ series
MMZ0402 Type
SHAPE & DIMENSIONS
RECOMMENDED LAND PATTERN
Dimensions in mm
0.2±0.02
0.4±0.02
0.08 to 0.14
0.2±0.02
Dimensions in mm
0.2 0.15 to 0.20.15 to 0.2
0.18 to 0.2
(7/33)
001-01 / 20130722 / e9412_mmz.fm
• All specifications are subject to change without notice.
EMC Components
MMZ seriesMMZ0402 Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
Measurement equipment
Equivalent measurement equipment may be used.
Impedance
[100MHz] DC resistance
(:)max.
Rated current
(mA)max. Part No.
(:)Tolerance
10 ±5:0.07 750 MMZ0402S100CT□□□
70 ±25% 0.36 300 MMZ0402S700CT□□□
120 ±25% 0.70 210 MMZ0402S121CT□□□
150 ±25% 0.70 200 MMZ0402S151CT□□□
Measurement item Product No. Manufacturer
Impedance E4991A+16196D Agilent Technologies
DC resistance Type-7556 Yokogawa
(8/33)
001-01 / 20130722 / e9412_mmz.fm
• All specifications are subject to change without notice.
EMC Components
MMZ seriesMMZ0402 Type
ELECTRICAL CHARACTERISTICS
Z VS. FREQUENCY CHARACTERISTICS (BY SERIES)
MMZ0402S SERIES
0
300
250
150
200
100
50
100001000100101
Frequency (MHz)
Impedance (Ω)
MMZ0402S151C
MMZ0402S700C
MMZ0402S100C
MMZ0402S121C
(9/33)
001-01 / 20130722 / e9412_mmz.fm
• All specifications are subject to change without notice.
EMC Components
MMZ seriesMMZ0402 Type
ELECTRICAL CHARACTERISTICS
Z, X, R VS. FREQUENCY CHARACTERISTICS
MMZ0402S100C MMZ0402S700C MMZ0402S121C
MMZ0402S151C
100001000100101
0
20
40
60
80
100
120
140
160
Frequency (MHz)
Impedance (Ω)
Z
R
X
100001000100101
ZR
X
5
10
15
20
0
Frequency (MHz)
Impedance (Ω)
(10/33)
001-01 / 20130722 / e9412_mmz.fm
• All specifications are subject to change without notice.
EMC Components
MMZ series
MMZ0603 Type
SHAPE & DIMENSIONS
RECOMMENDED LAND PATTERN
Dimensions in mm
0.3±0.03
0.6±0.03
0.1min.
0.3±0.03
Dimensions in mm
0.30 0.250.25
0.30
(11/33)
001-01 / 20130722 / e9412_mmz.fm
• All specifications are subject to change without notice.
EMC Components
MMZ seriesMMZ0603 Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
Measurement equipment
Equivalent measurement equipment may be used.
Impedance
[100MHz] DC resistance
(:)max.
Rated current
(mA)max. Part No.
(:)Tolerance
10 ±5:0.09 500 MMZ0603S100CT□□□
80 ±25% 0.30 200 MMZ0603S800CT□□□
120 ±25% 0.45 200 MMZ0603S121CT□□□
240 ±25% 0.57 200 MMZ0603S241CT□□□
470 ±25% 1.30 100 MMZ0603S471CT□□□
600 ±25% 1.45 100 MMZ0603S601CT□□□
1000 ±25% 1.25 200 MMZ0603S102HT □□□
75 ±25% 0.35 300 MMZ0603Y750CT □□□
120 ±25% 0.39 200 MMZ0603Y121CT□□□
240 ±25% 0.80 200 MMZ0603Y241CT□□□
470 ±25% 1.40 200 MMZ0603Y471CT□□□
600 ±25% 1.50 200 MMZ0603Y601CT□□□
33 ±25% 0.70 200 MMZ0603D330CT□□□
47 ±25% 0.70 200 MMZ0603D470CT □□□
56 ±25% 0.95 100 MMZ0603D560CT□□□
80 ±25% 1.25 100 MMZ0603D800CT□□□
10 ±5:0.50 200 MMZ0603F100CT□□□
22 ±25% 1.00 200 MMZ0603F220CT□□□
33 ±25% 1.30 150 MMZ0603F330CT□□□
Measurement item Product No. Manufacturer
Impedance E4991A+16197 Agilent Technologies
DC resistance Type-7556 Yokogawa
(12/33)
001-01 / 20130722 / e9412_mmz.fm
• All specifications are subject to change without notice.
EMC Components
MMZ seriesMMZ0603 Type
ELECTRICAL CHARACTERISTICS
Z VS. FREQUENCY CHARACTERISTICS (BY SERIES)
MMZ0603S SERIES MMZ0603Y SERIES MMZ0603D SERIES
MMZ0603F SERIES
0
100
200
300
400
500
600
700
800
900
1000
100001000100101
Frequency (MHz)
Impedance (Ω)
MMZ0603Y601C
MMZ0603Y471C
MMZ0603Y241C
MMZ0603Y121C
MMZ0603Y750C
0
200
400
800
600
1000
1200
1400
100001000100101
Frequency (MHz)
Impedance (Ω)
MMZ0603S601C
MMZ0603S471C
MMZ0603S241C
MMZ0603S121C
MMZ0603S800C
MMZ0603S100C
MMZ0603S102H
0
100
200
300
400
500
600
700
800
900
100001000100101
Frequency (MHz)
Impedance (Ω)
MMZ0603D800C
MMZ0603D560C
MMZ0603D330C
MMZ0603D470C
0
200
400
600
800
1000
1200
100001000100101
Frequency (MHz)
Impedance (Ω)
MMZ0603F330C
MMZ0603F220C
MMZ0603F100C
(13/33)
001-01 / 20130722 / e9412_mmz.fm
• All specifications are subject to change without notice.
EMC Components
MMZ seriesMMZ0603 Type
ELECTRICAL CHARACTERISTICS
Z, X, R VS. FREQUENCY CHARACTERISTICS
MMZ0603S100C MMZ0603S800C MMZ0603S121C
MMZ0603S241C MMZ0603S471C MMZ0603S601C
MMZ0603Y121C MMZ0603Y241C MMZ0603Y471C
MMZ0603Y601C MMZ0603D330C MMZ0603D560C
MMZ0603D800C MMZ0603F100C MMZ0603F220C
01 10 100 1000 10000
20
40
60
80
100
120
140
160
Frequency (MHz)
Impedance (Ω)
Z
X
R
1 10 100 1000 10000
Z
X
R
2
0
4
6
8
10
12
14
16
18
Frequency (MHz)
Impedance (Ω)
01 10 100 1000 10000
50
100
150
200
250
Frequency (MHz)
Impedance (Ω)
Z
X
R
800
600
400
200
01 10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
Z
X
R
1 10 100 1000 10000
0
100
200
300
400
500
600
700
800
900
Frequency (MHz)
Impedance (Ω)
Z
X
R
1 10 100 1000 10000
0
200
400
600
800
1000
Z
X
R
Frequency (MHz)
Impedance (Ω)
1 10 100 1000 10000
0
100
200
300
400
500
Z
X
R
Frequency (MHz)
Impedance (Ω)
1 10 100 1000 10000
0
100
200
300
400
500
600
700
800
900
Frequency (MHz)
Impedance (Ω)
Z
XR
1 10 100 1000 10000
0
100
200
300
400
500
600
700
Frequency (MHz)
Impedance (Ω)
Z
X
R
(14/33)
001-01 / 20130722 / e9412_mmz.fm
• All specifications are subject to change without notice.
EMC Components
MMZ seriesMMZ0603 Type
ELECTRICAL CHARACTERISTICS
Z, X, R VS. FREQUENCY CHARACTERISTICS
MMZ0603F330C
X
1 10 100 1000 10000
0
200
400
600
800
1000
1200
Z
R
Frequency (MHz)
Impedance (Ω)
(15/33)
001-01 / 20130722 / e9412_mmz.fm
• All specifications are subject to change without notice.
EMC Components
MMZ series
MMZ1005 Type
SHAPE & DIMENSIONS
RECOMMENDED LAND PATTERN
Dimensions in mm
0.5±0.05
1±0.05
0.1min.
0.5±0.05
Dimensions in mm
0.40.5 0.5
0.5
(16/33)
001-01 / 20130722 / e9412_mmz.fm
• All specifications are subject to change without notice.
EMC Components
MMZ seriesMMZ1005 Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
Measurement equipment
Equivalent measurement equipment may be used.
Impedance
[100MHz] DC resistance
(:)max.
Rated current
(mA)max. Part No.
(:)Tolerance
80 ±25% 0.19 450 MMZ1005B800CT□□□
120 ±25% 0.25 400 MMZ1005B121CT□□□
600 ±25% 0.85 200 MMZ1005B601CT□□□
80 ±25% 0.12 500 MMZ1005S800CT□□□
120 ±25% 0.22 500 MMZ1005S121CT□□□
240 ±25% 0.28 400 MMZ1005S241CT□□□
600 ±25% 0.52 300 MMZ1005S601CT□□□
1000 ±25% 0.75 200 MMZ1005S102CT□□□
40 ±25% 0.10 550 MMZ1005Y400CT□□□
80 ±25% 0.17 450 MMZ1005Y800CT□□□
120 ±25% 0.18 400 MMZ1005Y121CT□□□
240 ±25% 0.26 300 MMZ1005Y241CT□□□
300 ±25% 0.38 250 MMZ1005Y301CT□□□
470 ±25% 0.47 250 MMZ1005Y471CT□□□
600 ±25% 0.54 250 MMZ1005Y601CT□□□
1000 ±25% 0.70 200 MMZ1005Y102CT□□□
1500 ±25% 1.00 100 MMZ1005Y152CT□□□
1800 ±25% 0.85 150 MMZ1005Y182CT□□□
10 ±5:0.10 500 MMZ1005D100CT□□□
22 ±25% 0.17 400 MMZ1005D220CT□□□
33 ±25% 0.24 400 MMZ1005D330CT□□□
68 ±25% 0.38 400 MMZ1005D680CT□□□
120 ±25% 0.60 350 MMZ1005D121CT□□□
240 ±25% 0.90 200 MMZ1005D241CT□□□
33 ±25% 0.50 200 MMZ1005F330CT□□□
47 ±25% 0.60 100 MMZ1005F470CT□□□
56 ±25% 0.70 100 MMZ1005F560CT□□□
Measurement item Product No. Manufacturer
Impedance E4991A+16192A Agilent Technologies
DC resistance Type-7556 Yokogawa
(17/33)
001-01 / 20130722 / e9412_mmz.fm
• All specifications are subject to change without notice.
EMC Components
MMZ seriesMMZ1005 Type
ELECTRICAL CHARACTERISTICS
Z VS. FREQUENCY CHARACTERISTICS (BY SERIES)
MMZ1005B SERIES MMZ1005S SERIES MMZ1005Y SERIES
MMZ1005D SERIES MMZ1005F SERIES
0
100
200
300
400
500
600
700
800
100001000100101
Frequency (MHz)
Impedance (Ω)
MMZ1005B601C
MMZ1005B121C
MMZ1005B800C
0
200
400
600
800
1000
1200
1400
100001000100101
Frequency (MHz)
Impedance (Ω)
MMZ1005S102C
MMZ1005S601C
MMZ1005S241C
MMZ1005S121C
MMZ1005S800C
0
200
400
600
800
1000
1200
1400
1600
2200
1800
2000
100001000100101
Frequency (MHz)
Impedance (Ω)
MMZ1005Y152C
MMZ1005Y182C
MMZ1005Y102C
MMZ1005Y601C
MMZ1005Y471C
MMZ1005Y301C
MMZ1005Y241C
MMZ1005Y121C
MMZ1005Y800C
MMZ1005Y400C
0
500
1000
1500
2000
2500
3000
100001000100101
Frequency (MHz)
Impedance (Ω)
MMZ1005D241C
MMZ1005D121C
MMZ1005D680C
MMZ1005D330C
MMZ1005D220C
MMZ1005D100C
0
200
400
600
800
1000
1200
100001000100101
Frequency (MHz)
Impedance (Ω)
MMZ1005F560C
MMZ1005F470C
MMZ1005F330C
(18/33)
001-01 / 20130722 / e9412_mmz.fm
• All specifications are subject to change without notice.
EMC Components
MMZ seriesMMZ1005 Type
ELECTRICAL CHARACTERISTICS
Z, X, R VS. FREQUENCY CHARACTERISTICS
MMZ1005B800C MMZ1005B121C MMZ1005B601C
MMZ1005S800C MMZ1005S121C MMZ1005S241C
MMZ1005S601C MMZ1005S102C MMZ1005Y400C
MMZ1005Y800C MMZ1005Y121C MMZ1005Y241C
MMZ1005Y301C MMZ1005Y471C MMZ1005Y601C
120
40
20
60
80
100
01 10 100 1000 10000
ZR
X
Frequency (MHz)
Impedance (Ω)
1 10 100 1000 10000
0
20
40
60
80
100
120
140
160
180
Frequency (MHz)
Impedance (Ω)
ZR
X
800
700
600
500
400
300
200
100
01 10 100 1000 10000
Z
R
X
Frequency (MHz)
Impedance (Ω)
01 10 100 1000 10000
20
40
60
80
100
120
140
160
Frequency (MHz)
Impedance (Ω)
Z
R
X
400
350
300
250
200
150
100
50
01 10 100 1000 10000
ZR
X
Frequency (MHz)
Impedance (Ω)
01 10 100 1000 10000
Z
R
X
100
200
300
400
500
600
700
800
900
Frequency (MHz)
Impedance (Ω)
01 10 100 1000 10000
Z
X
R
200
400
600
800
1000
1200
1400
Frequency (MHz)
Impedance (Ω)
1 10 100 1000 10000
0
10
20
30
40
50
60
70
80
Frequency (MHz)
Impedance (Ω)
Z
R
X
01 10 100 1000 10000
20
40
60
80
100
120
140
160
Frequency (MHz)
Impedance (Ω)
Z
R
X
01 10 100 1000 10000
100
200
300
400
500
Frequency (MHz)
Impedance (Ω)
Z
R
X
01 10 100 1000 10000
Z
R
X
50
100
150
200
250
Frequency (MHz)
Impedance (Ω)
01 10 100 1000 10000
Z
R
X
100
200
300
400
500
600
Frequency (MHz)
Impedance (Ω)
01 10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
Z
R
X
200
400
600
800
1000
1200
(19/33)
001-01 / 20130722 / e9412_mmz.fm
• All specifications are subject to change without notice.
EMC Components
MMZ seriesMMZ1005 Type
ELECTRICAL CHARACTERISTICS
Z, X, R VS. FREQUENCY CHARACTERISTICS
MMZ1005Y102C MMZ1005Y152C MMZ1005Y182C
MMZ1005D100C MMZ1005D220C MMZ1005D330C
MMZ1005D680C MMZ1005D121C MMZ1005D241C
MMZ1005F330C MMZ1005F470C MMZ1005F560C
0
200
400
600
800
1000
1200
1400
1 10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
ZR
X
1800
1600
1400
1200
1000
800
600
400
200
01 10 100 1000 10000
ZR
X
Frequency (MHz)
Impedance (Ω)
1
0
200
400
600
800
1000
1200
1400
1600
1800
2000
2200
10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
ZR
X
70
60
50
40
30
20
10
01 10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
R
X
Z
3000
2500
2000
1500
1000
500
01 10 100 1000 10000
R
X
Z
Frequency (MHz)
Impedance (Ω)
0
100
200
300
400
500
600
1 10 100 1000 10000
Frequency (MHz)
Impedance (Ω)
ZR
X
1200
1000
800
600
400
200
01 10 100 1000 10000
Z
X
R
Frequency (MHz)
Impedance (Ω)
1000
900
800
700
600
500
400
300
200
100
01 10 100 1000 10000
Z
X
R
Frequency (MHz)
Impedance (Ω)
(20/33)
001-01 / 20130722 / e9412_mmz.fm
• All specifications are subject to change without notice.
EMC Components
MMZ series
MMZ1608 Type
SHAPE & DIMENSIONS
RECOMMENDED LAND PATTERN
Thickness(T)
0.6±0.15mm
0.8±0.15mm
0.8±0.15
1.6±0.15
0.3±0.2
T
Dimensions in mm
Dimensions in mm
0.80.6 0.6
0.8