Tyco Electronics Corporation
300 Constitution Drive Faraday Road 3816 Noborito, Tama-ku Asia Pacific Headquarters
Menlo Park, CA 94025-1164 Dorcan, Swindon, SN3 5HH Kawasaki, Kanagawa 214-8533 26 Ang Mo Kio, Industrial Park 2
USA United Kingdom Japan Singapore 569507
Tel:(800) 926-2425 (US & Canada) Tel: +44 1793 528171 Tel: +81 44 900 5102 Tel: +65 4866 151
Tel:+1 (650) 361-3860 (All other countries)
Users should independently evaluate the suitability of the product for their application.
For more information about this product visit www.tycoelectronics.com
All information, including illustrations, is believed to be reliable. Users, however, should independently evaluate the suitability of each product for their application. Tyco Electronics Corporation makes
no warranties as to the accuracy or completeness of the information, and disclaims any liability regarding its use. Tyco Electronics Corporation’s only obligations are those in the Standard Terms and
Conditions of Sale for these products and in no case will Tyco Electronics Corporation be liable for any incidental, indirect, or consequential damages arising from the sale, resale, use, or misuse of the
product. Tyco Electronics Corporation’s Specifications are subject to change without notice. In addition, Tyco Electronics Corporation reser ves the right to make changes in materials or processing
without notification to the Buyer which do not affect compliance with any applicable specification.
Specification values
Property Unit Requirement Method of test
Physical* Dimensions mm (inches) See reverse ASTM D 2671
Tensile strength** psi (MPa) 1500 (10.3) minimum ASTM D 2671
Ultimate elongation** percent 250 minimum See below***
Heat shock No dripping, flowing, or ASTM D 2671
(4 hours at 225°C/437°F) cracking of outer jacket
Dynamic cut-through pounds (kg) 30 (13.6) minimum ASTM D 3032
See below***
Flammability (black only) Self-extinguishing within ASTM D 2671
60 seconds See below***
Splice performance Current leakage test 0.25 microamp maximum See below***
Insulation resistance test 108ohms minimum
Room temperature flex test See below***
Current leakage test 0.25 microamp maximum
Insulation resistance test 108ohms minimum
Thermal shock See below***
Current leakage test 0.25 microamp maximum
Insulation resistance test 108ohms minimum
Cold impact No cracking of outer jacket See below***
Current leakage test 0.25 microamp maximum
Insulation resistance test 108ohms minimum
Heat aging See below***
Current leakage test 0.25 microamp maximum
Insulation resistance test 108ohms minimum
Fluid immersion See below***
Current leakage test 0.25 microamp maximum
Insulation resistance test 108ohms minimum
*Note: These requirements apply to ES Cap material only. These tests, except dimensions, cannot be performed on material in ES Cap configuration.
**Calculation based on wall thickness of jacket only.
***Consult Raychem RW-3006 for specific details about test procedures.
Raychem is a trademark of Tyco Electronics Corporation.
© 1996, 2002 Tyco Electronics Corporation Printed in USA 1654052 Revised 04/04