Amphenol (R) AC and SAE AS50151 Threaded Standard Cylindrical Connectors www.amphenol-industrial.com Amphenol(R) 97 Series Connectors are UL recognized and CSA recognized. Table of Contents Page Amphenol (R) AC Series Connectors Introduction/General Information..............................................................................................................................................................1 AC Threaded Connector Styles Wall mounting receptacle......................................................................................................................................................2 Line receptacle......................................................................................................................................................................3 Box mounting receptacle.......................................................................................................................................................4 Straight plug..........................................................................................................................................................................5 90 degree plug.......................................................................................................................................................................6 AC Series how to order.................................................................................................................................................................59 Amphenol(R) SAE AS50151 Standard Cylindrical Connectors General Information, Class Designations.................................................................................................................................................7 MS-A, MS-C General Information...................................................................................................................................................8 MS3100A or C wall mounting receptacle...............................................................................................................................9 MS3101A inline receptacle..................................................................................................................................................10 MS3102A or C box mounting receptacle..............................................................................................................................11 MS3106A straight plug........................................................................................................................................................12 MS3108A 90 degree plug....................................................................................................................................................13 MS-E/F General Information.........................................................................................................................................................14 MS3100E/F wall mounting receptacle.................................................................................................................................15 MS3101E/F inline receptacle...............................................................................................................................................16 MS3102E box mounting receptacle.....................................................................................................................................17 MS3106E/F straight plug.....................................................................................................................................................18 MS3108E 90 degree plug....................................................................................................................................................19 MS-R General Information............................................................................................................................................................20 MS3100R wall mounting receptacle....................................................................................................................................21 MS3101R inline receptacle..................................................................................................................................................22 MS3102R box mounting receptacle.....................................................................................................................................23 MS3106R straight plug........................................................................................................................................................24 MS/Standard How to Order...........................................................................................................................................................60 Amphenol AC Threaded/ SAE AS50151 Insert Arrangements, Contacts and Accessories AC Series/MS insert availability.............................................................................................................................................. 25-27 AC Series/MS insert alternate positioning.....................................................................................................................................28 AC Series/MS solder contacts.......................................................................................................................................................29 AC Series crimp contacts..............................................................................................................................................................30 RADSOK(R) technology and crimp socket contacts..................................................................................................................................... 31 AC Series/MS contact arrangements...................................................................................................................................... 32-53 AC Series thermocouple availability..............................................................................................................................................54 AC Series thermocouple contact arrangements ................................................................................................................... 55 - 58 AC Series/MS accessories - sealing gaskets, sealing plugs, sealing ranges................................................................................61 MS3057A cable clamp, MS3420 sleeve........................................................................................................................................62 Plug protection caps......................................................................................................................................................................63 Receptacle protection caps...........................................................................................................................................................64 Dust caps......................................................................................................................................................................................65 AC Series/MS application tools, torque values..............................................................................................................................66 Reverse Bayonet Coupling 5015 type connectors..................................................................................................................................67 AC Series Threaded Connectors with RADSOK(R) Contacts...................................................................................................................68 Amphe-Power(R) 5015 Connectors (AC threaded series with high amperage RADSOK(R) contacts), 5015 Connectors with PCB contacts.............................................................................................................................................68 For additional information on AC Series or SAE AS50151 Connectors for special application requirements, contact your local sales office or - Amphenol Corporation Amphenol Industrial Operations 191 Delaware Avenue Sidney, New York 13838-1395 Telephone: 888-364-9011 Fax: 520-397-7169 www.amphenol-industrial.com Ask for the Amphenol Industrial North American Product Overview for additional connectors offered. This catalog can be viewed, printed and saved from website: www.amphenol-industrial.com. Amphenol Industrial is a Certified ISO 9001 Manufacturer. For specific questions about RoHS compliance, consult Amphenol Industrial Operations, or call the RoHS Product Compliance and Technical Support line: 1-866-315-8559 Amphenol(R) AC Series industrial application threaded style connector AC Threaded Series wall mounting receptacle box mounting receptacle line receptacle straight plug AC Threaded Connectors with RADSOK(R) High Amperage Contacts Designed with the industrial user in mind, for widely diverse applications such as mass transportation, automotive, heavy equipment and geophysical industries, and for the entertainment/ lighting industries, the new AC Series of Connectors offer the following features: * Rugged aluminum shells * Durability and reliability * Environmentally acceptable shell plating options * Conductive and non-conductive * Single key/keyway shell polarization * Five shell styles in sizes 10SL to 40 * Threaded coupling * Various backshells * Resilient inserts * Outstanding moisture barrier * High dielectric strength * High resistance to vibration * Over 275 insert patterns available * Alternate insert positioning * Machined contacts * Maximum corrosion resistance * Maximum current capacity * Low millivolt drop * Solder and crimp contacts - silver plated or optional gold plating * General duty and environmental versions * -55 C to +125 C operating temp. range * Standard application tools Amphe-PowerTM Connectors - AC Threaded Connectors with RADSOK(R) contacts are also available. These are high amperage capability connectors designed for the most demanding industrial and transportation applications. * The RADSOK contact will handle 50% to 150% higher amperages than standard contacts (size dependent). * Current Amphe-Power lines support from 35A to 500A continuous duty. * RADSOK contacts are available in size 12 (35 amps), size 8 (70 amps), size 4 (120 amps), and size 0 (250 amps). See page 31 for more information. Note: The previous AC-B Bayonet series is replaced by the newer ACA-B Reverse Bayonet series. For availability of the AC-B, consult Amphenol Industrial Operations. For information on ACA-B Reverse Bayonet series connectors see Amphenol catalog IC-4. RoHS Compliant options available. 1 AC Threaded wall mounting receptacle L A Thread X S B R P L AC ( )00A* AC ( )00E* M K A Thread L A Thread S PGA PGR R P X B T 4 Holes M B M * To complete order number, see how to order, page 59. Shell Size 10SL 12S 12 14S 14 16S 16 18 20 22 24 28 32 36 40 A B Min Thread Full Class 2A Thread .6250-24UNEF .391 .7500-20UNEF .450 .7500-20UNEF .625 .8750-20UNEF .450 .8750-20UNEF .625 1.0000-20UNEF .450 1.0000-20UNEF .625 1.1250-18UNEF .625 1.2500-18UNEF .625 1.3750-18UNEF .625 1.5000-18UNEF .625 1.7500-18UNS .625 2.0000-18UNS .625 2.2500-16UN .625 2.5000-16UN .625 P K K +.020 L L1 L2 -.010 Max Max Max .672 2.129 3.010 2.189 .672 2.129 3.010 2.261 .860 2.524 3.500 2.644 .672 2.201 3.188 2.261 .860 2.524 3.641 2.644 .672 2.201 3.265 2.266 .860 2.524 3.718 2.644 .891 2.596 3.718 2.716 .891 2.654 3.798 2.774 .891 2.654 4.080 2.916 .953 2.885 4.142 3.051 .953 2.885 4.291 3.140 1.031 2.943 4.643 3.184 1.031 2.943 4.643 3.245 1.031 3.068 5.635 3.670 AC ( )00AF* AC ( )00F* M +.010 P -.000 Max .562 .894 .562 .894 .750 .894 .562 1.083 .750 1.083 .562 1.181 .750 1.181 .750 1.300 .750 1.487 .750 1.487 .812 1.712 .812 1.712 .875 2.063 .875 2.283 .875 2.688 AC ( )00PG( )* K P1 Hex Flats PGA PGR R S Ref Ref Ref .005 .010 .750 .150/.320 .070/.240 .719 1.000 .750 .150/.320 .070/.240 .812 1.094 .750 .150/.320 .070/.240 .812 1.094 .880 .190/.390 .110/.280 .906 1.188 .880 .190/.390 .110/.280 .906 1.188 .940 .230/.470 .190/.350 .969 1.281 .940 .230/.470 .190/.350 .969 1.281 .940 .230/.470 .190/.350 1.063 1.375 1.060 .390/.560 .270/.470 1.156 1.500 1.060 .390/.560 .270/.470 1.250 1.625 1.060 .390/.560 .270/.470 1.375 1.750 1.300 .510/.710 .350/.630 1.562 2.000 1.650 .700/.980 .510/.790 1.750 2.250 1.650 .700/.980 .510/.790 1.938 2.500 1.650 .700/.980 .510/.790 2.188 2.750 T Dia +.004 -.002 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .147 .147 .173 .173 .173 Inches X Max O.D. Cable .312 .312 .312 .438 .438 .531 .531 .625 .750 .750 .938 .938 1.250 1.375 1.625 Millimeters B Min Shell Full Size Thread 10SL 9.93 12S 11.43 12 15.88 14S 11.43 14 15.88 16S 11.43 16 15.88 18 15.88 20 15.88 22 15.88 24 15.88 28 15.88 32 15.88 36 15.88 40 15.88 KM P Hex +.51 L L1 L2 +.25 P Flats PGA PGR R S -.25 Max Max Max -.00 Max Ref Ref Ref .13 .25 17.07 54.08 76.45 55.60 14.28 22.71 19.05 3.81/8.13 1.78/6.10 18.26 25.40 17.07 54.08 76.45 57.43 14.28 22.71 19.05 3.81/8.13 1.78/6.10 20.63 27.79 21.84 64.11 88.90 67.16 19.05 22.71 19.05 3.81/8.13 1.78/6.10 20.63 27.79 17.07 55.91 80.98 57.43 14.28 27.51 22.35 4.83/9.91 2.79/7.11 23.01 30.18 21.84 64.11 92.48 67.16 19.05 27.51 22.35 4.83/9.91 2.79/7.11 23.01 30.18 17.07 55.91 82.93 57.56 14.28 30.00 23.88 5.84/11.94 4.83/8.89 24.61 32.54 21.84 64.11 94.44 67.16 19.05 30.00 23.88 5.84/11.94 4.83/8.89 24.61 32.54 22.63 65.94 94.44 68.99 19.05 33.02 23.88 5.84/11.94 4.83/8.89 27.00 34.93 22.63 67.41 96.47 70.46 19.05 37.77 26.92 9.91/14.22 6.86/11.94 29.36 38.10 22.63 67.41 103.63 74.07 19.05 37.77 26.92 9.91/14.22 6.86/11.94 31.75 41.28 24.21 73.28 105.21 77.50 20.63 43.49 26.92 9.91/14.22 6.86/11.94 34.93 44.45 24.21 73.28 108.99 79.76 20.63 43.49 33.02 12.95/18.03 8.89/16.00 39.68 50.80 26.19 74.75 117.93 80.87 22.23 52.40 41.91 17.78/24.89 12.95/20.07 44.45 57.15 26.19 74.75 117.93 82.42 22.23 57.99 41.91 17.78/24.89 12.95/20.07 49.23 63.50 26.19 77.93 143.13 93.22 22.23 68.28 41.91 17.78/24.89 12.95/20.07 55.58 69.85 1 All dimensions for reference only. 2 T Dia +.10 -.05 3.05 3.05 3.05 3.05 3.05 3.05 3.05 3.05 3.05 3.05 3.73 3.73 4.39 4.39 4.39 X Max O.D. Cable 7.93 7.93 7.93 11.13 11.13 13.49 13.49 15.88 19.05 19.05 23.83 23.83 31.75 34.93 41.28 AC Threaded line receptacle L A Thread X P L B A Thread AC ( )01A* AC ( )01E* PGA PGR L P A Thread B X B AC ( )01PG( )* P AC ( )01AF* AC ( )01F* * To complete order number, see how to order, page 59. A Shell Thread Size Class 2 A 10SL .6250-24UNEF 12S .7500-20UNEF 12 .7500-20UNEF 14S .8750-20UNEF 14 .8750-20UNEF 16S 1.0000-20UNEF 16 1.0000-20UNEF 18 1.1250-18UNEF 20 1.2500-18UNEF 22 1.3750-18UNEF 24 1.5000-18UNEF 28 1.7500-18UNS 32 2.0000-18UNS 36 2.2500-16UN 40 2.5000-16UN Shell Size 10SL 12S 12 14S 14 16S 16 18 20 22 24 28 32 36 40 B Min P1 Full L L1 L2 P HexFlats PGA PGR Thread Max Max Max Max Ref Ref Ref .406 2.129 3.010 2.189 .894 .750 .150/.320 .070/.240 .422 2.129 3.010 2.261 .894 .750 .150/.320 .070/.240 .656 2.524 3.500 2.644 .894 .750 .150/.320 .070/.240 .391 2.201 3.188 2.261 1.083 .880 .190/.390 .110/.280 .625 2.524 3.641 2.644 1.083 .880 .190/.390 .110/.280 .391 2.201 3.265 2.266 1.181 .940 .230/.470 .190/.350 .625 2.524 3.718 2.644 1.181 .940 .230/.470 .190/.350 .625 2.596 3.718 2.716 1.300 .940 .230/.470 .190/.350 .625 2.654 3.798 2.774 1.487 1.060 .390/.560 .270/.470 .625 2.654 4.080 2.916 1.487 1.060 .390/.560 .270/.470 .625 2.885 4.142 3.051 1.712 1.060 .390/.560 .270/.470 .625 2.885 4.291 3.140 1.712 1.300 .510/.710 .350/.630 .625 2.943 4.643 3.184 2.063 1.650 .700/.980 .510/.790 .625 2.943 4.643 3.245 2.283 1.650 .700/.980 .510/.790 .625 3.068 5.635 3.670 2.688 1.650 .700/.980 .510/.790 B MinP1 Full L L1 L2 P Hex Flats PGA PGR Thread Max Max Max Max Ref Ref Ref 10.31 54.08 76.45 55.60 22.71 19.05 3.81/8.13 1.78/6.10 10.72 54.08 76.45 57.43 22.71 19.05 3.81/8.13 1.78/6.10 16.66 64.11 88.90 67.16 22.71 19.05 3.81/8.13 1.78/6.10 9.93 55.91 80.98 57.43 27.51 22.35 4.83/9.91 2.79/7.11 15.88 64.11 92.48 67.16 27.51 22.35 4.83/9.91 2.79/7.11 9.93 55.91 82.93 57.56 30.00 23.88 5.84/11.94 4.83/8.89 15.88 64.11 94.44 67.16 30.00 23.88 5.84/11.94 4.83/8.89 15.88 65.94 94.44 68.99 33.02 23.88 5.84/11.94 4.83/8.89 15.88 67.41 96.47 70.46 37.77 26.92 9.91/14.22 6.86/11.94 15.88 67.41 103.63 74.07 37.77 26.92 9.91/14.22 6.86/11.94 15.88 73.28 105.21 77.50 43.49 26.92 9.91/14.22 6.86/11.94 15.88 73.28 108.99 79.76 43.49 33.02 12.95/18.03 8.89/16.00 15.88 74.75 117.93 80.87 52.40 41.91 17.78/24.89 12.95/20.07 15.88 74.75 117.93 82.42 57.99 41.91 17.78/24.89 12.95/20.07 15.88 77.93 143.13 93.22 68.28 41.91 17.78/24.89 12.95/20.07 All dimensions for reference only. 3 Inches X Max O.D. Cable .312 .312 .312 .438 .438 .531 .531 .625 .750 .750 .938 .938 1.250 1.375 1.625 Millimeters X Max O.D. Cable 7.93 7.93 7.93 11.13 11.13 13.49 13.49 15.88 19.05 19.05 23.83 23.83 31.75 34.93 41.28 AC Threaded box mounting receptacle S R S A Thread P R B T 4 Holes L M K Z AC ( )02A* AC ( )02E* Inches * To complete order number, see how to order, page 59. Shell Size 8S 10S 10SL 12S 12 14S 14 16S 16 18 20 22 24 28 32 36 40 A Thread Class 2 A .5000-28UNEF .6250-24NEF .6250-24NEF .7500-20UNEF .7500-20UNEF .8750-20UNEF .8750-20UNEF 1.0000-20UNEF 1.0000-20UNEF 1.1250-18NEF 1.2500-18NEF 1.3750-18NEF 1.5000-18NEF 1.7500-18NS 2.0000-18NS 2.2500-16UN 2.5000-16UN B Min Full Thread .391 .391 .391 .450 .625 .450 .625 .450 .625 .625 .625 .625 .625 .625 .625 .625 .625 K +.020 -.010 .672 .672 .672 .672 .860 .672 .860 .672 .860 .891 .891 .891 .953 .953 1.031 1.031 1.031 L +.000 -.010 .297 .297 .297 .297 .484 .297 .484 .297 .484 .453 .453 .453 .453 .453 .438 .438 .438 M +.010 -.000 .562 .562 .562 .562 .750 .562 .750 .562 .750 .750 .750 .750 .812 .812 .875 .875 .875 P Dia +.010 R S -.000 .005 .031 .375 .594 .875 .500 .719 1.000 .625 .719 1.000 .625 .812 1.094 .625 .812 1.094 .750 .906 1.188 .750 .906 1.188 .875 .969 1.281 .875 .969 1.281 1.000 1.062 1.375 1.125 1.156 1.500 1.250 1.250 1.625 1.375 1.375 1.750 1.625 1.562 2.000 1.875 1.750 2.250 2.062 1.938 2.500 2.312 2.188 2.750 K +.51 -.25 17.07 17.07 17.07 17.07 21.84 17.07 21.84 17.07 21.84 22.63 22.63 22.63 24.21 24.21 26.19 26.19 26.19 L +.00 -.25 7.54 7.54 7.54 7.54 12.29 7.54 12.29 7.54 12.29 11.51 11.51 11.51 11.51 11.51 11.13 11.13 11.13 M +.25 -.00 14.28 14.28 14.28 14.28 19.05 14.28 19.05 14.28 19.05 19.05 19.05 19.05 20.63 20.63 22.23 22.23 22.23 P Dia +.25 R S -.00 .13 .79 9.53 15.09 22.23 12.70 18.26 25.40 15.88 18.26 25.40 15.88 20.63 27.79 15.88 20.63 27.79 19.05 23.01 30.18 19.05 23.01 30.18 22.23 24.61 32.54 22.23 24.61 32.54 25.40 26.98 34.93 28.58 29.36 38.10 31.75 31.75 41.28 34.93 34.93 44.45 41.28 39.68 50.80 47.63 44.45 57.15 52.38 49.23 63.50 58.73 55.58 69.85 T Dia +.004 -.002 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .147 .147 .173 .173 .173 Millimeters Shell Size 8S 10S 10SL 12S 12 14S 14 16S 16 18 20 22 24 28 32 36 40 B Min Full Thread 9.93 9.93 9.93 11.43 15.88 11.43 15.88 11.43 15.88 15.88 15.88 15.88 15.88 15.88 15.88 15.88 15.88 ** Increase Z dimension by .312 for size "0" contact only. T Dia +.10 -.05 3.05 3.05 3.05 3.05 3.05 3.05 3.05 3.05 3.05 3.05 3.05 3.05 3.73 3.73 4.39 4.39 4.39 Z Max** 13.18 13.18 13.18 13.18 18.34 13.18 18.34 13.18 18.34 17.55 17.55 17.55 15.95 15.95 13.97 13.97 13.97 All dimensions for reference only. 4 Z Max** .519 .519 .519 .519 .722 .519 .722 .519 .722 .691 .691 .691 .628 .628 .550 .550 .550 AC Threaded straight plug L L A Thread P PGA PGR A Thread P X Q AC ( )06A* AC ( )06E* AC ( )06PG ( )* E L Z D A Thread A Thread P X V Thread L AC ( )05A* AC ( )05E* AC ( )06AF* AC ( )06F* * To complete order number, see how to order, page 59. AE P1 Hex Shell Thread D +.020 L L1 L2 L3 P Flats PGA PGR Q Size Class 2B .010 -.030 Max Max Max Max Max Ref Ref Ref Max 10SL .6250-24UNEF .438 .298 2.129 3.010 2.189 .989 .894 .750 .150/.320 .070/.240 .946 12S .7500-20UNEF .438 .312 2.129 3.010 2.261 .989 .894 .750 .150/.320 .070/.240 .995 12 .7500-20UNEF .625 .469 2.524 3.500 2.644 1.364 .894 .750 .150/.320 .070/.240 .995 14S .8750-20UNEF .438 .312 2.201 3.188 2.261 .989 1.083 .880 .190/.390 .110/.280 1.123 14 .8750-20UNEF .625 .469 2.524 3.641 2.644 1.364 1.083 .880 .190/.390 .110/.280 1.123 16S 1.0000-20UNEF .438 .312 2.201 3.265 2.266 .989 1.181 .940 .230/.470 .190/.350 1.250 16 1.0000-20UNEF .625 .469 2.524 3.718 2.644 1.364 1.181 .940 .230/.470 .190/.350 1.250 18 1.1250-18UNEF .625 .469 2.596 3.718 2.716 1.364 1.300 .940 .230/.470 .190/.350 1.333 20 1.2500-18UNEF .625 .469 2.654 3.798 2.774 1.364 1.487 1.060 .390/.560 .270/.470 1.461 22 1.3750-18UNEF .625 .469 2.654 4.080 2.916 1.364 1.487 1.060 .390/.560 .270/.470 1.588 24 1.5000-18UNEF .688 .469 2.885 4.142 3.051 1.427 1.712 1.060 .390/.560 .270/.470 1.715 28 1.7500-18UNS .688 .469 2.885 4.291 3.140 1.427 1.712 1.300 .510/.710 .350/.630 1.968 32 2.0000-18UNS .750 .469 2.943 4.643 3.184 1.489 2.063 1.650 .700/.980 .510/.790 2.209 36 2.2500-16UN .750 .469 2.943 4.643 3.245 1.489 2.283 1.650 .700/.980 .510/.790 2.463 40 2.5000-16UN .750 .469 3.068 5.635 3.670 1.489 2.688 1.650 .700/.980 .510/.790 2.718 V Thread Plated Class 2A .6250-24UNEF .6250-24UNEF .6250-24UNEF .7500-20UNEF .7500-20UNEF .8750-20UNEF .8750-20UNEF 1.0000-20UNEF 1.1250-18UNEF 1.2500-18UNEF 1.3750-18UNEF 1.6250-18UNEF 1.8750-16UN 2.0625-16UN 2.3125-16UN X Max O.D. Cable .312 .312 .312 .438 .438 .531 .531 .625 .750 .750 .938 .938 1.250 1.375 1.625 Millimeters E P Hex Shell D +.51 L L1 L2 L3 P Flats PGA PGR Q Size .25 -.76 Max Max Max Max Max Ref Ref Ref Max 10SL 11.13 7.57 54.08 76.45 55.60 25.12 22.71 19.05 3.81/8.13 1.78/6.10 24.03 12S 11.13 7.93 54.08 76.45 57.43 25.12 22.71 19.05 3.81/8.13 1.78/6.10 25.27 12 15.88 11.91 64.11 88.90 67.16 34.65 22.71 19.05 3.81/8.13 1.78/6.10 25.27 14S 11.13 7.93 55.91 80.98 57.43 25.12 27.51 22.35 4.83/9.91 2.79/7.11 28.52 14 15.88 11.91 64.11 92.48 67.16 34.65 27.51 22.35 4.83/9.91 2.79/7.11 28.52 16S 11.13 7.93 55.91 82.93 57.56 25.12 30.00 23.88 5.84/11.94 4.83/8.89 31.75 16 15.88 11.91 64.11 94.44 67.16 34.65 30.00 23.88 5.84/11.94 4.83/8.89 31.75 18 15.88 11.91 65.94 94.44 68.99 34.65 33.02 23.88 5.84/11.94 4.83/8.89 33.86 20 15.88 11.91 67.41 96.47 70.46 34.65 37.77 26.92 9.91/14.22 6.86/11.94 37.11 22 15.88 11.91 67.41 103.63 74.07 34.65 37.77 26.92 9.91/14.22 6.86/11.94 40.34 24 17.48 11.91 73.28 105.21 77.50 36.25 43.49 26.92 9.91/14.22 6.86/11.94 43.56 28 17.48 11.91 73.28 108.99 79.76 36.25 43.49 33.02 12.95/18.03 8.89/16.00 49.99 32 19.05 11.91 74.75 117.93 80.87 37.82 52.40 41.91 17.78/24.89 12.95/20.07 56.11 36 19.05 11.91 74.75 117.93 82.42 37.82 57.99 41.91 17.78/24.89 12.95/20.07 62.56 40 19.05 11.91 77.93 143.13 93.22 37.82 68.28 41.91 17.78/24.89 12.95/20.07 69.04 1 All dimensions for reference only. 5 X Max O.D. Cable 7.93 7.93 7.93 11.13 11.13 13.49 13.49 15.88 19.05 19.05 23.83 23.83 31.75 34.93 41.28 Z 1.14 14.28 14.28 20.63 14.28 20.63 14.28 20.63 20.63 20.63 20.63 20.63 20.63 20.63 20.63 20.63 Inches Z .045 .562 .562 .812 .562 .812 .562 .812 .812 .812 .812 .812 .812 .812 .812 .812 AC Threaded 90 degree plug Q L Q L A Thread A Thread U U X AC( )08A* P AC( )08E* X P * To complete order number, see how to order, page 59. Shell A Thread L L1 Size Class 2B Max Max 10SL .6250-24NEF 1.492 1.492 12S .7500-20UNEF 1.492 1.492 12 .7500-20UNEF 1.867 1.867 14S .8750-20UNEF 1.556 1.556 14 .8750-20UNEF 1.931 1.931 16S 1.0000-20UNEF 1.682 1.682 16 1.0000-20UNEF 2.057 2.057 18 1.1250-18NEF 2.119 2.119 20 1.2500-18NEF 2.369 2.322 22 1.3750-18NEF 2.369 2.322 24 1.5000-18NEF 2.620 2.510 28 1.7500-18NS 2.620 2.510 32 2.0000-18NS 2.842 2.744 36 2.2500-16UN 2.900 2.869 40 2.5000-16UN 3.025 2.994 Shell Size 10SL 12S 12 14S 14 16S 16 18 20 22 24 28 32 36 40 L Max 37.90 37.90 47.42 39.52 49.05 42.72 52.25 53.82 60.17 60.17 66.55 66.55 72.19 73.66 76.84 L1 Max 37.90 37.90 47.42 39.52 49.05 42.72 52.25 53.82 58.98 58.98 63.75 63.75 69.70 72.87 76.05 P Max 23.01 23.01 23.01 26.19 26.19 28.58 28.58 31.34 37.69 37.69 42.75 42.75 55.58 59.54 68.28 All dimensions for reference only. 6 P Max .906 .906 .906 1.031 1.031 1.125 1.125 1.234 1.484 1.484 1.683 1.683 2.188 2.344 2.688 Q Dia Max .946 .995 .995 1.123 1.123 1.250 1.250 1.333 1.461 1.588 1.715 1.968 2.209 2.463 2.719 Q Dia Max 24.03 25.27 25.27 28.52 28.52 31.75 31.75 33.86 37.11 40.34 43.56 49.99 56.11 62.56 69.06 U Max 33.15 33.15 33.15 37.72 37.72 40.95 40.95 44.15 45.72 47.30 53.34 54.92 61.09 64.41 81.43 U Max 1.305 1.305 1.305 1.485 1.485 1.612 1.612 1.738 1.800 1.862 2.100 2.162 2.405 2.536 3.206 U1 Max 46.03 46.03 46.03 47.63 47.63 49.20 49.20 53.57 55.55 57.15 63.09 64.67 77.34 81.74 85.73 U1 Max 1.812 1.812 1.812 1.875 1.875 1.937 1.937 2.109 2.187 2.250 2.484 2.546 3.045 3.218 3.375 Millimeters X Max O.D. Cable 7.93 7.93 7.93 11.13 11.13 13.49 13.49 15.88 19.05 19.05 23.83 23.83 31.75 34.93 41.28 Inches X Max O.D. Cable .312 .312 .312 .438 .438 .531 .531 .625 .750 .750 .938 .938 1.250 1.375 1.625 (R) Amphenol MIL-DTL-5015 AmphenolSAE AS50151 and MIL-5015 Type Standard Cylindrical Connectors Standard Cylindrical Connectors DESIGN CHARACTERISTICS * Medium to heavy weight weight cylindrical cylindrical * Durable, field-proven design * Environmental Environmental resistant * Resilient inserts * Operating voltage to 3000 3000 VAC VAC (RMS) (RMS) at atsea sealevel level * Threaded couplings * Single key/keyway shell polarization * Cost effective CUSTOMER OPTIONS CUSTOMER * Five shell OPTIONS styles ** Five shellshell styles Nineteen sizes ** Nineteen shell sizes 305 contact arrangements from 1 to 104 circuits ** 305 contact arrangements from16-0 1 to accepting 104 circuits Solder or crimp contacts, sizes * Solder or crimp contacts, sizes 16-0 accepting 22-0 AWG. 22-0 AWG. * Five class designations ** Coaxial and thermocouple Alternate insert positioningcontact options ** Five class designations Hermetic configurations available * Alternate insert positioning connectors meet the latestavailable performance requirements *MSHermetic configurations of SAE AS50151. These connectors represent well* Zinc alloy plating (cadmium-free) available proven electrical capability at an acceptable cost for most MS connectors the islatest performance requireequipment wheremeet durability important. ments of MIL-DTL-5015. These connectors represent SAE AS50151 features threaded couplings and single well-proven electrical capability at an acceptable cost for key/keyway polarization, representing maximum simplic most equipment where durability is important. ity in design. Applications include military ground support MIL-DTL-5015 features and single equipment, ordnance andthreaded shipboardcouplings installations. key/keyway polarization, representing maximum simplicAmphenol Industrial Operations manufactures five ity in design. Applications include military ground support classes of connectors to meet different requirements. equipment, ordnance and shipboard installations. Class designations and brief descriptions are listed below. Amphenol Industrial Operations manufactures five A - Solid Shell - for general, non-environmental appli classes of connectors to meet different requirements. cations. Class designations and brief descriptions are listed C - Pressurized - for use on pressurized bulkheads or below. pressure barriers; limits air leakage regardless of A - Solid Shell - for general, non-environmental applitype and class of plug mated with them. cations. E/F -Environmental Resisting with Strain Relief - C - Pressurized - for use on pressurized bulkheads or designed for applications where the connector will pressure barriers; limits air leakage regardless of be exposed to moisture, vibration, and rapid changes type and class of plug mated with them. in pressure and temperature. E/F -Environmental Resisting with Strain Relief - R - Lightweight Environmental Resisting - shorter in designed for applications where the connector will length and lighter in weight than the E and F classes, be exposed to moisture, vibration, and rapid the MS-R offers a high degree of reliability under changes in pressure and temperature. adverse conditions: recommended for new design R - Lightweight applications.Environmental Resisting - shorter in length and lighter in weight than the E and F classes,Classes the MS-R a high to degree of reliability Environmental F andoffers R are updated and produced in strict underto SAE adverse conditions: for new accordance AS50151. Classes A,recommended C and E are still produced, but aredesign no longer listed on the qualified products database (QPD). applications. MS-A, MS-C MS-E/F MS-R 3 7 MS/Standard and MS-C MS-C MS-A and MS-A and and MS-C MS-C MS-A and and MS-C MS-C class class connectors connectors perform perform many many of of the vital vital functions in powering, testing and ground support systems. Class A applications applications include include communications equipment, computers and shipboard installations installations where mechanical forces forces and physical physical parameters are not sub subject to to extreme extreme or orrapid rapidenvironmental environmentalchanges. changes. Class C connectors are most frequently used on on pressur pressurized bulkheads or pressure barriers at at elevated elevated altitudes altitudes or maritime AirAir leakage is limited to onetocubic maritimeapplications. applications. leakage is limited one inch hour a pressure differential of 30 lbs. square cubicper inch perathour at a pressure differential of per 30 lbs. per inch. square inch. wall mounting mounting receptacle receptacle Shells: Shell components components are are fabricated from high grade grade alumi aluminum alloy. Electrically conductive cadmium plate finish finish with an olive drab chromate after-treat offers offers corrosion corrosion resistance. inline cable receptacle connecting plug Contacts: Contacts are available solder with solder and in pre-filled both solder and cups. crimp Pins versions. sockets machined from copper a with silvera Pins andare sockets are machined from alloy copperwith alloy plated finish. finish. Size 16Size and16 12 and socket incorporate a silver plated 12 contacts socket contacts incorclosed design. Refer to page 54 for additional porate entry a closed entry design. Refer to pages 49, contact 67 and information. 68 for additional contact information. Inserts: Inserts: Inserts Inserts are are resilient resilient neoprene, neoprene, offering high dielectric strength, high vibration. higharc arcresistance resistanceand andresistance resistancetoto vibration. Proprietary design permits pressurization of either pin or socket insert. box mounting mounting receptacle receptacle straight plug plug 90 degree degree plug plug 84 MS/Standard MS/Standard MS3100A or MS3100A or C C wall mounting wall mounting receptacle receptacle S L R V Thread A Thread S R B T 4 Holes M Z K To complete order number, see "how to order" pg. 59. Forcomplete solder well data, see page To order number, see29. "how to order" pg. 70. For solder well data, see page 67. B A Min K B Shell Thread Full +.020 A Min K Size Class 2A Thread -.010 Shell Thread Full +.020 Size Class 2A Thread -.010 8S .5000-28UNEF .391 .672 8S .5000-28UNEF .391 .672 10S .6250-24 UNF .391 .672 10S .6250-24 UNF .391 .672 10SL .6250-24 UNF .391 .672 10SL .6250-24 UNF .391 .672 12S .7500-20UNEF .450 .672 12S .7500-20UNEF .450 .672 12 .7500-20UNEF .625 .860 12 .7500-20UNEF .625 .860 14S .8750-20UNEF .450 .672 14S .8750-20UNEF .450 .672 14 .8750-20UNEF .625 .860 14 .8750-20UNEF .625 .860 16S 1.0000-20UNEF .450 .672 16S 1.0000-20UNEF .450 .672 16 1.0000-20UNEF .625 .860 16 1.0000-20UNEF .625 .860 18 1.1250-18NEF .625 .891 18 1.1250-18NEF .625 .891 20 1.2500-18NEF .625 .891 20 1.2500-18NEF .625 .891 22 1.3750-18NEF .625 .891 22 1.3750-18NEF .625 .891 24 1.5000-18NEF .625 .953 24 1.5000-18NEF .625 .953 28 1.7500-18NS .625 .953 28 1.7500-18NS .625 .953 32 2.0000-18NS .625 1.031 32 2.0000-18NS .625 1.031 36 2.2500-16UN .625 1.031 36 2.2500-16UN .625 1.031 40 2.5000-16UN .625 1.031 40 2.5000-16UN .625 1.031 44*** 2.7500-16UN .625 1.031 44*** 2.7500-16UN .625 1.031 48*** 3.0000-16UN .625 1.031 1.031 *48*** Increase3.0000-16UN Z dimension by .312 for .625 size "0" contact only. ** Increase Z Z dimension .062 for * Increase dimension by by .312 for size size "0" "0" contact contact only. only. *** Available in proprietary version only. ** Increase Z dimension by .062 for size "0" contact only. +.020 -.030 *** Available in proprietary version only. .020 -.030 +.020 L .030 L .030 1.391 1.391 1.468 1.468 1.468 1.468 1.468 1.468 1.843 1.843 1.468 1.468 1.843 1.843 1.468 1.468 1.843 1.843 1.938 1.938 1.844 1.844 1.938 1.938 1.969 1.969 2.188 2.188 2.157 2.157 2.219 2.219 2.188 2.188 2.547 2.547 2.547 2.547 M +.010 M -.000 +.010 -.000 .562 .562 .562 .562 .562 .562 .562 .562 .750 .750 .562 .562 .750 .750 .562 .562 .750 .750 .750 .750 .750 .750 .750 .750 .812 .812 .812 .812 .875 .875 .875 .875 .875 .875 .875 .875 .875 .875 .020 9 5 R .005 R .005 .594 .594 .719 .719 .719 .719 .812 .812 .812 .812 .906 .906 .906 .906 .969 .969 .969 .969 1.063 1.063 1.156 1.156 1.250 1.250 1.375 1.375 1.562 1.562 1.750 1.750 1.938 1.938 2.188 2.188 2.375 2.375 2.625 2.625 S .031 S .031 .875 .875 1.000 1.000 1.000 1.000 1.094 1.094 1.094 1.094 1.188 1.188 1.188 1.188 1.281 1.281 1.281 1.281 1.375 1.375 1.500 1.500 1.625 1.625 1.750 1.750 2.000 2.000 2.250 2.250 2.500 2.500 2.750 2.750 3.000 3.000 3.000 3.000 T Dia. T +.004 Dia. -.002 +.004 -.002 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .147 .147 .147 .147 .173 .173 .173 .173 .173 .173 .173 .173 .173 .173 V Thread V Class 2A Thread Class 2A .5000-28UNEF .5000-28UNEF .5000-28UNEF .5000-28UNEF .6250-24NEF .6250-24NEF .6250-24NEF .6250-24NEF .6250-24NEF .6250-24NEF .7500-20UNEF .7500-20UNEF .7500-20UNEF .7500-20UNEF .8750-20UNEF .8750-20UNEF .8750-20UNEF .8750-20UNEF 1.0000-20UNEF 1.0000-20UNEF 1.1875-18NEF 1.1875-18NEF 1.1875-18NEF 1.1875-18NEF 1.4375-18NEF 1.4375-18NEF 1.4375-18NEF 1.4375-18NEF 1.7500-18NS 1.7500-18NS 2.0000-18NS 2.0000-18NS 2.2500-16UN 2.2500-16UN 2.5000-16UN 2.5000-16UN 3.0000-16UN 3.0000-16UN Z +.050 Z -.060 +.050 -.060 .422 .422 .422 .422 .422 .422 .422 .422 .672 .672 .422 .422 .672 .672 .422 .422 .672 .672 .641* .641* .641* .641* .641* .641* .578* .578* .578* .578* .500* .500* .500* .500* .500* .500* .751** .751** .751** .751** MS/Standard MS3101A cable connecting plug inline receptacle L B N A Thread V Thread Z To complete order number, see see "how "how to toorder" order"pg. pg.59. 70. For solder well data, see see page page 29. 67. Shell Size A Thread Class Class 2A B Min. Full Thread L .030 N Dia. Max. V Thread Class 2A Z .040 8S 10S 10SL 12S 12 14S 14 16S 16 18 20 22 24 28 32 36 40 44*** .5000-28UNEF .6250-24NEF .6250-24NEF .7500-20UNEF .7500-20UNEF .8750-20UNEF .8750-20UNEF 1.0000-20UNEF 1.0000-20UNEF 1.1250-18NEF 1.2500-18NEF 1.3750-18NEF 1.5000-18NEF 1.7500-18NS 2.0000-18NS 2.2500-16UN 2.5000-16UN 2.7500-16UN .406 .406 .406 .422 .656 .391 .625 .391 .625 .625 .625 .625 .625 .625 .625 .625 .625 .625 1.390 1.468 1.468 1.468 1.843 1.468 1.843 1.468 1.843 1.938 1.844 1.938 1.969 2.188 2.157 2.219 2.188 2.521 .532 .628 .755 .755 .755 .882 .882 1.010 1.010 1.137 1.264 1.392 1.519 1.774 1.996 2.251 2.506 3.135 .5000-28UNEF .5000-28UNEF .6250-24NEF .6250-24NEF .6250-24NEF .7500-20UNEF .7500-20UNEF .8750-20UNEF .8750-20UNEF 1.0000-20UNEF 1.1875-18NEF 1.1875-18NEF 1.4375-18NEF 1.4375-18NEF 1.7500-18NS 2.0000-18NS 2.2500-16UN 2.5000-16UN 1.094 1.094 1.094 1.094 1.532 1.094 1.532 1.094 1.532 1.532* 1.532* 1.532* 1.532* 1.532* 1.532* 1.532* 1.532* 1.782** * Increase Z dimension by .312 for size "0" contact contact only. only. ** Increase Z dimension by .062 for size "0" contact contact only. only. Available in proprietary version only. *** Available only. 10 6 MS/Standard MS3102A or or C C box mounting receptacle receptacle S R B A Thread S N R T 4 Holes L M Z K To To complete complete order ordernumber, number,see see"how "howtotoorder" order"pg. pg.59. 70. For For solder solder well welldata, data,see seepage page29. 67. Shell Shell Size Size A A Thread Thread Class 2A 2A Class B B Min Min Full Full Thread Thread K K +.020 +.020 -.010 -.010 LL +.000 +.000 -.010 -.010 M M +.010 +.010 -.000 -.000 N N Dia. Dia. +.010 +.010 -.000 -.000 R R .005 .005 8S 8S 10S 10S 10SL 10SL 12S 12S 12 12 14S 14S 14 14 16S 16S 16 16 18 18 20 20 22 22 24 24 28 28 32 32 36 36 40 40 44*** 44*** 48*** 48*** .5000-28UNEF .5000-28UNEF .6250-24NEF .6250-24NEF .6250-24NEF .6250-24NEF .7500-20UNEF .7500-20UNEF .7500-20UNEF .7500-20UNEF .8750-20UNEF .8750-20UNEF .8750-20UNEF .8750-20UNEF 1.0000-20UNEF 1.0000-20UNEF 1.0000-20UNEF 1.0000-20UNEF 1.1250-18NEF 1.1250-18NEF 1.2500-18NEF 1.2500-18NEF 1.3750-18NEF 1.3750-18NEF 1.5000-18NEF 1.5000-18NEF 1.7500-18NS 1.7500-18NS 2.0000-18NS 2.0000-18NS 2.2500-16UN 2.2500-16UN 2.5000-16UN 2.5000-16UN 2.7500-16UN 2.7500-16UN 3.0000-16UN 3.0000-16UN .391 .391 .391 .391 .391 .391 .450 .450 .625 .625 .450 .450 .625 .625 .450 .450 .625 .625 .625 .625 .625 .625 .625 .625 .625 .625 .625 .625 .625 .625 .625 .625 .625 .625 .625 .625 .625 .625 .672 .672 .672 .672 .672 .672 .672 .672 .860 .860 .672 .672 .860 .860 .672 .672 .860 .860 .891 .891 .891 .891 .891 .891 .953 .953 .953 .953 1.031 1.031 1.031 1.031 1.031 1.031 1.063 1.063 1.063 1.063 .297 .297 .297 .297 .297 .297 .297 .297 .484 .484 .297 .297 .484 .484 .297 .297 .484 .484 .453 .453 .453 .453 .453 .453 .453 .453 .453 .453 .438 .438 .438 .438 .438 .438 .543 .543 .543 .543 .562 .562 .562 .562 .562 .562 .562 .562 .750 .750 .562 .562 .750 .750 .562 .562 .750 .750 .750 .750 .750 .750 .750 .750 .812 .812 .812 .812 .875 .875 .875 .875 .875 .875 .875 .875 .875 .875 .375 .375 .500 .500 .625 .625 .625 .625 .625 .625 .750 .750 .750 .750 .875 .875 .875 .875 1.000 1.000 1.125 1.125 1.250 1.250 1.375 1.375 1.625 1.625 1.875 1.875 2.062 2.062 2.312 2.312 2.594 2.594 2.812 2.812 .594 .594 .719 .719 .719 .719 .812 .812 .812 .812 .906 .906 .906 .906 .969 .969 .969 .969 1.062 1.062 1.156 1.156 1.250 1.250 1.375 1.375 1.562 1.562 1.750 1.750 1.938 1.938 2.188 2.188 2.375 2.375 2.625 2.625 ** Increase Increase ZZdimension dimensionby by .312 .312 for forsize size"0" "0"contact contactonly. only. ** ** Increase Increase ZZdimension dimensionby by .062 .062 for forsize size"0" "0"contact contactonly. only. *** ***Available Available in in proprietary proprietaryversion versiononly. only. +.020 +.020 -.030 -.030 .020 .020 11 7 SS .031 .031 .875 .875 1.000 1.000 1.000 1.000 1.094 1.094 1.094 1.094 1.188 1.188 1.188 1.188 1.281 1.281 1.281 1.281 1.375 1.375 1.500 1.500 1.625 1.625 1.750 1.750 2.000 2.000 2.250 2.250 2.500 2.500 2.750 2.750 3.000 3.000 3.250 3.250 TT Dia. Dia. +.004 +.004 -.002 -.002 ZZ +.050 +.050 -.060 -.060 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .147 .147 .147 .147 .173 .173 .173 .173 .173 .173 .173 .173 .209 .209 .422 .422 .422 .422 .422 .422 .422 .422 .672 .672 .422 .422 .672 .672 .422 .422 .672 .672 .641* .641* .641* .641* .641* .641* .578 .578 .578* .578* .500* .500* .500* .500* .500* .500* .768** .768** .769** .769** MS/Standard MS3106A straight plug L J Z Q V Thread A Thread To complete order order number, number, see see"how "howto toorder" order"pg. pg.59. 70. For solder well data, data, see seepage page29. 67. All lockwire holes holes are are .045 .045 dia. dia. min. min. Shell Size 8S 10S 10SL 12S 12 14S 14 16S 16 18 20 22 24 28 32 36 40 44*** 48*** A Thread Class 2B .5000-28UNEF .6250-24NEF .6250-24NEF .7500-20UNEF .7500-20UNEF .8750-20UNEF .8750-20UNEF 1.0000-20UNEF 1.0000-20UNEF 1.1250-18NEF 1.2500-18NEF 1.3750-18NEF 1.5000-18NEF 1.7500-18NS 2.0000-18NS 2.2500-16UN 2.5000-16UN 2.7500-16UN 3.3000-16UN J .005 L .030 Q Dia. Max. V Thread Class 2A Z .045 .531 .531 .531 .531 .719 .531 .719 .531 .719 .719 .719 .719 .719 .719 .719 .719 .719 .719 .719 .859 .937 .937 .937 1.124 .937 1.124 .937 1.124 1.219 1.125 1.219 1.251 1.470 1.439 1.500 1.469 1.818 1.818 .741 .869 .946 .995 .995 1.123 1.123 1.250 1.250 1.333 1.461 1.588 1.715 1.968 2.209 2.463 2.719 3.084 3.354 .5000-28UNEF .5000-28UNEF .6250-24NEF .6250-24NEF .6250-24NEF .7500-20UNEF .7500-20UNEF .8750-20UNEF .8750-20UNEF 1.0000-20UNEF 1.1875-18NEF 1.1875-18NEF 1.4375-18NEF 1.4375-18NEF 1.7500-18NS 2.0000-18NS 2.2500-16UN 2.5000-16UN 3.0000-16UN .562 .562 .562 .562 .812 .562 .812 .562 .812 .812* .812* .812* .812* .812* .812* .812* .812* 1.063** 1.063** * Increase Z dimension dimension by by .312 for size size "0" "0" contact contactonly. only. ** Increase Z dimension dimension by by .062 for size size "0" "0" contact contactonly. only. *** Available in proprietary proprietary version version only. only. +.020 -.030 12 8 MS/Standard MS3108A 90 degree plug L Z J Q A Thread U W V Thread To complete order number, see To see "how "how to to order" order"pg. pg.59. 70. For solder well data, see page For page 29. 67. All lockwire holes are .045 .045dia. dia.min. min. Shell Size Size A A Thread Class Class 2B J .005 .005 L L Max. Q Dia. Dia. Max. U U Max. V Thread Class Class 2A W Z .045 8S 10S 10SL 12S 12 14S 14 16S 16 18 20 22 24 28 32 36 40 .5000-28UNEF .6250-24NEF .6250-24NEF .7500-20UNEF .7500-20UNEF .8750-20UNEF .8750-20UNEF 1.0000-20UNEF 1.0000-20UNEF 1.1250-18NEF 1.2500-18NEF 1.3750-18NEF 1.5000-18NEF 1.7500-18NS 2.0000-18NS 2.2500-16UN 2.5000-16UN .531 .531 .531 .531 .719 .531 .719 .531 .719 .719 .719 .719 .719 .719 .719 .719 .719 .896 .927 .951 .956 1.143 1.120 1.207 1.146 1.332 1.395 1.645 1.645 1.896 1.896 2.118 2.176 2.301 .741 .869 .946 .995 .995 1.123 1.123 1.250 1.250 1.333 1.461 1.588 1.715 1.968 2.209 2.463 2.719 .750 .750 .875 .875 .875 1.000 1.000 1.062 1.062 1.188 1.250 1.312 1.438 1.500 1.750 1.875 2.031 .5000-28UNEF .5000-28UNEF .6250-24NEF .6250-24NEF .6250-24NEF .7500-20UNEF .7500-20UNEF .8750-20UNEF .8750-20UNEF 1.0000-20UNEF 1.1875-18NEF 1.1875-18NEF 1.4375-18NEF 1.4375-18NEF 1.7500-18NS 2.0000-18NS 2.2500-16UN .375 .375 .375 .375 .375 .375 .375 .375 .375 .375 .375 .375 .375 .375 .438 .500 .500 .562 .562 .562 .562 .812 .562 .812 .562 .812 .812* .812* .812* .812* .812* .812* .812* .812* ** Increase Increase Z dimension by .312 for size "0" contact contact only. only. 13 9 MS/Standard MS-E/F MS-E MS-E & & FF MS MS Class Class F F connectors connectors satisfy satisfy all all the the performance performance requirements AS50151. Class E,E, environmental is requirements of ofSAE MIL-DTL-5015. Class environmental also produced, butbutis isnonolonger is also produced, longerlisted listedon on the the qualified qualified products products listing listing (QPL). (QPL). These These connectors connectors are are recom recommended mended for for conditions conditions where where vibration, vibration, moisture, moisture, pres pressure sure and/or and/or temperature temperature are are extreme. extreme. Strain Strain relief relief is is supplied supplied on on most mostshell shellsizes. sizes. Shells: Shells: wall wall mounting mounting receptacle receptacle Shell Shell components components are are fabricated fabricated from from high high grade grade alumi aluminum alloy. The standard hardware plating is electrically num alloy. standard electrically conductive conductive cadmium plated plated finish finish with with an an olive olive drab drab chro chromate after-treatment for corrosion resistance. mate after-treatment for corrosion resistance. Consult Amphenol, Sidney, NY for other plating options. Contacts: Contacts:are silver plated copper alloy for maximum cor Contacts rosion resistance, currentalloy carrying capacity and Contacts are silvermaximum plated copper for maximum corlow millivolt drop. maximum Size 16 and 12 carrying socket contacts rosion resistance, current capacity incorporate a closed entry to page 54 for and low millivolt drop. Sizedesign. 16 andRefer 12 socket contacts additional contact information. incorporate a closed entry design. Crimp and solder versions are available. Refer to pages 49, 67 and 68 for Inserts: additional contact information. Resilient neoprene inserts provide an outstanding mois Inserts: ture barrier, high dielectric strength, and resistance to vibration. pin or socketprovide insert can be pressurized. Resilient Either neoprene inserts an outstanding moisture barrier, high dielectric strength, and resistance to Strain Relief Clamp: vibration. Either pin or socket insert can be pressurized. Strain relief clamps minimize tension at the solder well Strain Relief Clamp: connection and provide a positive mechanical moisture seal. field minimize serviceability is possible with well the StrainComplete relief clamps tension at the solder strain relief clamp. connection and provide a positive mechanical moisture seal. Complete field serviceability is possible with the strain relief clamp. inline cable receptacle connecting plug box box mounting mounting receptacle receptacle straight straight plug plug 90 90 degree degree plug plug 14 10 MS/Standard MS3100E/F wall mounting receptacle S L R A Thread S XX R P B T 4 Holes M K Z To To complete complete order order number, number, see see"how "howto toorder" order"pg. pg.59. 70. For For solder solder well well data, data, see seepage page29. 67. Shell Size A Thread Class 2A B Min. Full Thread K +.020 -.010 10SL 12S 12 14S 14 16S 16 18 20 22 24 28 32 36 40 .6250-24UNEF .7500-20UNEF .7500-20UNEF .8750-20UNEF .8750-20UNEF 1.0000-20UNEF 1.0000-20UNEF 1.1250-18UNEF 1.2500-18UNEF 1.3750-18UNEF 1.5000-18UNEF 1.7500-18UNS 2.0000-18UNS 2.2500-16UN 2.5000-16UN .391 .450 .625 .450 .625 .450 .625 .625 .625 .625 .625 .625 .625 .625 .625 .672 .672 .860 .672 .860 .672 .860 .891 .891 .891 .953 .953 1.031 1.031 1.031 L Max. M +.010 -.000 P Max. R .005 2.129 2.129 2.129 2.201 2.524 2.201 2.524 2.596 2.654 2.654 2.885 2.885 2.943 2.943 3.068 .562 .562 .750 .562 .750 .562 .750 .750 .750 .750 .812 .812 .875 .875 .875 .896 .896 .896 1.021 1.021 1.151 1.151 1.242 1.499 1.499 1.781 1.781 2.087 2.281 2.581 .719 .812 .812 .906 .906 .969 .969 1.063 1.156 1.250 1.375 1.562 1.750 1.938 2.188 ** Increase Increase Z Z dimension dimension by by .312 .312 for for size size "0" "0" contact contactonly. only. 15 11 S .010 T Dia. +.004 -.002 Z* Max. XX Min. Cable Clearance 1.000 1.094 1.094 1.188 1.188 1.281 1.281 1.375 1.500 1.625 1.750 2.000 2.250 2.500 2.750 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .147 .147 .173 .173 .173 .472 .472 .722 .472 .722 .472 .722 .691 .691 .691 .628 .628 .550 .550 .550 .281 .281 .281 .406 .406 .500 .500 .531 .656 .740 .781 .922 1.156 1.250 1.562 MS/Standard MS3101E/F cable receptacle connecting plug inline L A Thread XX B Z To complete order order number, number, see see"how "howto toorder" order"pg. pg.59. 70. For solder well data, data, see seepage page29. 67. Shell Size 10SL 12S 12 14S 14 16S 16 18 20 22 24 28 32 36 40 A Thread Class 2A .6250-24UNEF .6250-24UNEF .7500-20UNEF .7500-20UNEF .7500-20UNEF .7500-20UNEF .8750-20UNEF .8750-20UNEF .8750-20UNEF .8750-20UNEF 1.0000-20UNEF 1.0000-20UNEF 1.1250-18UNEF 1.2500-18UNEF 1.3750-18UNEF 1.5000-18UNEF 1.7500-18UNS 2.0000-18UNS 2.2500-16UN 2.5000-16UN B Min. Full Thread J Max. L Max. Z* Max. XX Min. Cable Clearance .406 .422 .656 .391 .625 .391 .625 .625 .625 .625 .625 .625 .625 .625 .625 .896 .896 .896 1.021 1.021 1.151 1.151 1.242 1.499 1.499 1.781 1.781 2.087 2.281 2.581 2.129 2.129 2.129 2.201 2.524 2.201 2.524 2.596 2.654 2.654 2.885 2.885 2.943 2.943 3.068 1.134 1.134 1.572 1.134 1.572 1.134 1.572 1.572 1.572 1.572 1.572 1.572 1.572 1.572 1.572 .281 .281 .281 .406 .406 .500 .500 .531 .656 .740 .781 .922 1.156 1.250 1.562 * Increase Z dimension dimension by by .312 for size size "0" "0" contact contactonly. only. 16 12 J MS/Standard MS3102E box mounting receptacle S R B A Thread S N R T 4 Holes L M K Z To complete order order number, number, see see"how "howto toorder" order"pg. pg.59. 70. For solder well data, data, see seepage page29. 67. Shell Size A Thread Class 2A B Min. Full Thread K +.020 -.010 L +.000 -.010 M +.010 -.000 N Dia. +.010 -.000 R .005 8S 10S 10SL 12S 12 14S 14 16S 16 18 20 22 24 28 32 36 40 .5000-28UNEF .6250-24NEF .6250-24NEF .7500-20UNEF .7500-20UNEF .8750-20UNEF .8750-20UNEF 1.0000-20UNEF 1.0000-20UNEF 1.1250-18NEF 1.2500-18NEF 1.3750-18NEF 1.5000-18NEF 1.7500-18NS 2.0000-18NS 2.2500-16UN 2.5000-16UN .391 .391 .391 .450 .625 .450 .625 .450 .625 .625 .625 .625 .625 .625 .625 .625 .625 .672 .672 .672 .672 .860 .672 .860 .672 .860 .891 .891 .891 .953 .953 1.031 1.031 1.031 .297 .297 .297 .297 .484 .297 .484 .297 .484 .453 .453 .453 .453 .453 .438 .438 .438 .562 .562 .562 .562 .750 .562 .750 .562 .750 .750 .750 .750 .812 .812 .875 .875 .875 .375 .500 .625 .625 .625 .750 .750 .875 .875 1.000 1.125 1.250 1.375 1.625 1.875 2.062 2.312 .594 .719 .719 .812 .812 .906 .906 .969 .969 1.062 1.156 1.250 1.375 1.562 1.750 1.938 2.188 ** Increase Z dimension dimension by by .312 for for size size "0" "0" contact contactonly. only. 17 13 S .031 T Dia. +.004 -.002 Z +.050 -.060 .875 1.000 1.000 1.094 1.094 1.188 1.188 1.281 1.281 1.375 1.500 1.625 1.750 2.000 2.250 2.500 2.750 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .147 .147 .173 .173 .173 .422 .422 .422 .422 .672 .422 .672 .422 .672 .641* .641* .641* .578* .578* .500* .500* .500* MS/Standard MS3106E/F straight plug L Q Z B A Thread J XX To complete order order number, number,see see"how "howtotoorder" order"pg. pg.59. 70. For solder well well data, data, see seepage page29. 67. All lockwire holes holes are are .045 .045 dia. dia.min. min. Shell Shell Size Size 10SL 10SL 12S 12S 12 12 14S 14S 14 14 16S 16S 16 16 18 18 20 20 22 22 24 24 28 28 32 32 36 36 40 40 A A Thread Thread Class 2A Class 2A .6250-24UNEF .6250-24UNEF .7500-20UNEF .7500-20UNEF .7500-20UNEF .7500-20UNEF .8750-20UNEF .8750-20UNEF .8750-20UNEF .8750-20UNEF 1.0000-20UNEF 1.0000-20UNEF 1.0000-20UNEF 1.0000-20UNEF 1.1250-18UNEF 1.1250-18UNEF 1.2500-18UNEF 1.2500-18UNEF 1.3750-18UNEF 1.3750-18UNEF 1.5000-18UNEF 1.5000-18UNEF 1.7500-18UNS 1.7500-18UNS 2.0000-18UNS 2.0000-18UNS 2.2500-16UN 2.2500-16UN 2.5000-16UN 2.5000-16UN B B .005 .005 .531 .531 .531 .531 .719 .719 .531 .531 .719 .719 .531 .531 .719 .719 .719 .719 .719 .719 .719 .719 .719 .719 .719 .719 .719 .719 .719 .719 .719 .719 J J Max. Max. .896 .896 .896 .896 .896 .896 1.021 1.021 1.021 1.021 1.151 1.151 1.151 1.151 1.242 1.242 1.499 1.499 1.499 1.499 1.781 1.781 1.781 1.781 2.087 2.087 2.281 2.281 2.581 2.581 * Increase Z dimension by .312 for size "0" contact only. * Increase Z dimension by .312 for size "0" contact only. 18 14 L L Max. Max. 2.129 2.129 2.129 2.129 2.129 2.129 2.201 2.201 2.524 2.524 2.201 2.201 2.524 2.524 2.596 2.596 2.654 2.654 2.654 2.654 2.885 2.885 2.885 2.885 2.943 2.943 2.943 2.943 3.068 3.068 Q Q Max. Max. .946 .946 .995 .995 .995 .995 1.123 1.123 1.123 1.123 1.250 1.250 1.250 1.250 1.333 1.333 1.461 1.461 1.588 1.588 1.715 1.715 1.968 1.968 2.209 2.209 2.463 2.463 2.718 2.718 Z* Z* .045 .045 .607 .607 .607 .607 .857 .857 .607 .607 .857 .857 .607 .607 .857 .857 .857 .857 .857 .857 .857 .857 .857 .857 .857 .857 .857 .857 .857 .857 .857 .857 XX XX Min. Min. Cable Cable Clearance Clearance .281 .281 .281 .281 .281 .281 .406 .406 .406 .406 .500 .500 .500 .500 .531 .531 .656 .656 .740 .740 .781 .781 .922 .922 1.156 1.156 1.250 1.250 1.562 1.562 MS/Standard MS3108E 90 degree plug plug L J Q Z U A Thread Y N To To complete complete order order number, number,see see"how "howtotoorder" order"pg. pg.59. 70. For For solder solder well well data, data,see seepage page29. 67. All All lockwire lockwire holes holes are are .045 .045 dia. dia.min. min. Shell Shell Size Size 8S 8S 10S 10S 10SL 10SL 12S 12S 12 12 14S 14S 14 14 16S 16S 16 16 18 18 20 20 22 22 24 24 28 28 32 32 36 36 40 40 A A Thread Thread Class 2B 2B Class .5000-28UNEF .5000-28UNEF .6250-24NEF .6250-24NEF .6250-24NEF .6250-24NEF .7500-20UNEF .7500-20UNEF .7500-20UNEF .7500-20UNEF .8750-20UNEF .8750-20UNEF .8750-20UNEF .8750-20UNEF 1.0000-20UNEF 1.0000-20UNEF 1.1000-20UNEF 1.1000-20UNEF 1.1250-18NEF 1.1250-18NEF 1.2500-18NEF 1.2500-18NEF 1.3750-18NEF 1.3750-18NEF 1.5000-18NEF 1.5000-18NEF 1.7500-18NS 1.7500-18NS 2.0000-18NS 2.0000-18NS 2.2500-16UN 2.2500-16UN 2.5000-16UN 2.5000-16UN JJ .005 .005 .531 .531 .531 .531 .531 .531 .531 .531 .719 .719 .531 .531 .719 .719 .531 .531 .719 .719 .719 .719 .719 .719 .719 .719 .719 .719 .719 .719 .719 .719 .719 .719 .719 .719 L L Max. Max. .927 .927 .927 .927 .951 .951 .956 .956 1.143 1.143 1.020 1.020 1.207 1.207 1.146 1.146 1.333 1.333 1.395 1.395 1.598 1.598 1.598 1.598 1.786 1.786 1.786 1.786 2.020 2.020 2.145 2.145 2.270 2.270 N N Max. Max. Increase ZZ dimension dimension by by .312 .312 for for size size "0" "0"contact contactonly. only. ** Increase .807 .807 .807 .807 .901 .901 .901 .901 .901 .901 1.026 1.026 1.026 1.026 1.119 1.119 1.119 1.119 1.229 1.229 1.479 1.479 1.479 1.479 1.666 1.666 1.666 1.666 2.135 2.135 2.260 2.260 2.510 2.510 19 15 Q Q Dia. Dia. Max. Max. .741 .741 .869 .869 .946 .946 .995 .995 .995 .995 1.123 1.123 1.123 1.123 1.250 1.250 1.250 1.250 1.333 1.333 1.461 1.461 1.588 1.588 1.729 1.729 1.968 1.968 2.209 2.209 2.463 2.463 2.719 2.719 U U Max. Max. 1.445 1.445 1.445 1.445 1.508 1.508 1.508 1.508 1.508 1.508 1.570 1.570 1.570 1.570 1.633 1.633 1.633 1.633 1.759 1.759 1.931 1.931 1.993 1.993 2.119 2.119 2.181 2.181 2.570 2.570 2.695 2.695 2.851 2.851 Y Y Thread Thread Class 2B 2B Class 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 8-32NC 8-32NC 8-32NC 8-32NC 8-32NC 8-32NC 8-32NC 8-32NC 10-32NF 10-32NF 10-32NF 10-32NF 10-32NF 10-32NF Z Z .045 .045 .562 .562 .562 .562 .562 .562 .562 .562 .812 .812 .562 .562 .812 .812 .562 .562 .812 .812 .812* .812* .812* .812* .812* .812* .812* .812* .812* .812* .812* .812* .812* .812* .812* .812* MS/Standard MS-R MS-R MS-R Specification Specification requirements requirements for for greater greater reliability reliability in in aa shorter, shorter, lighter lighter weight weight environmental environmental resistant resistant connector connector led led to to the the design design of of the the MS-R. MS-R. MS MS Class Class R R connectors connectors satisfy performance requirements of SAE satisfy allallthethe performance requirements of AS50151. MIL-DTL5015. This low profile assembly was attained by moving the axial compression nut assembly and grommet assemblybyforward This low profile was attained moving and the flush the rear ofnut theand insert. The neoprene grom met, axial with compression grommet assembly forward with lowwith coefficient assures threading and its flush the rearofoffriction, the insert. The easier neoprene gromof wirewith bundles andcoefficient quicker assembly and ser viceability of met, its low of friction, assures easier the unit. Molded in each holeassembly insure a moisture threading of wirewebs bundles andwire quicker and serbarrier around eachunit. wire.Molded webs in each wire hole viceability of the insure a moisture barrier eachjoint wire. The addition of an "O" ringaround at the main of all MS3106R wall wall mounting mountingreceptacle receptacle plugs provide of a main joint seal The addition an "O" ring at supplementary the main joint toof the all interfacial seal, thus insuring a higher degree of reliability MS3106R plugs provide a main joint seal supplementary when halves different sources to the connector interfacial seal, thusfrom insuring a higher degreeare of employed. reliability when connector halves from different sources are employed. MS-R types are recommended for new Shells: design applications. Shell components are fabricated from high grade alumi Shells: num alloy. All components have the standard electrically conductive cadmium plated finish with olive drabalumichro Shell components are fabricated froman high grade mate after-treatment for corrosion resistance. num alloy. All components have the standard electrically conductive cadmium plated finish with an olive drab chroContacts: mate after-treatment for corrosion resistance. Consult Contacts are machined from copper alloy for maximum Amphenol, Sidney, NY for other plating options. corrosion resistance, maximum current carrying capacity Contacts: and low millivolt drop. Refer to page 54 for additional contact information. Contacts are machined from copper alloy for maximum corrosion Inserts: resistance, maximum current carrying capacity and low millivolt drop. Both crimp and solder versions are Resilient neoprene inserts provide an outstanding mois available. Refer to pages 49, 67 and 68 for additional ture barrier, maximum vibration resistance and high contact information. dielectric strength. Either pin or socket insert can be Inserts: pressurized. Resilient neoprene inserts provide an outstanding moisture barrier, maximum vibration resistance and high dielectric strength. Either pin or socket insert can be pressurized. inline receptacle cable connecting plug box mounting receptacle box mounting receptacle straight straight plug plug 20 16 MS/Standard MS3100R wall mounting receptacle L S K M R P Z B R S H A Thread T 4 Holes Y To complete complete order number, see "how to To to order" order" pg. pg.59. 70. For solder solder well data, see page 29. For 67. All lockwire lockwire holes are .045 dia. min. All Shell Shell Size Size A A Thread Thread Class Class 2A 2A B B Min. Min. Full Full Thread Thread H H Dia. Dia. Max. Max. K K +.020 +.020 -.010 -.010 8S 8S 10S 10S 10SL 10SL 12S 12S 12 12 14S 14S 14 14 16S 16S 16 16 18 18 20 20 22 22 24 24 28 28 32 32 36 36 40 40 .5000-28UNEF .5000-28UNEF .6250-24NEF .6250-24NEF .6250-24NEF .6250-24NEF .7500-20UNEF .7500-20UNEF .7500-20UNEF .7500-20UNEF .8750-20UNEF .8750-20UNEF .8750-20UNEF .8750-20UNEF 1.0000-20UNEF 1.0000-20UNEF 1.0000-20UNEF 1.0000-20UNEF 1.1250-18NEF 1.1250-18NEF 1.2500-18NEF 1.2500-18NEF 1.3750-18NEF 1.3750-18NEF 1.5000-18NEF 1.5000-18NEF 1.7500-18NS 1.7500-18NS 2.0000-18NS 2.0000-18NS 2.2500-16UN 2.2500-16UN 2.5000-16UN 2.5000-16UN .391 .391 .391 .391 .391 .391 .450 .450 .625 .625 .450 .450 .625 .625 .450 .450 .625 .625 .625 .625 .625 .625 .625 .625 .625 .625 .625 .625 .625 .625 .625 .625 .625 .625 .959 .959 1.026 1.026 1.120 1.120 1.120 1.120 1.120 1.120 1.307 1.307 1.307 1.307 1.432 1.432 1.432 1.432 1.557 1.557 1.744 1.744 1.869 1.869 1.994 1.994 2.166 2.166 2.541 2.541 2.729 2.729 2.979 2.979 .672 .672 .672 .672 .672 .672 .672 .672 .860 .860 .672 .672 .860 .860 .672 .672 .860 .860 .891 .891 .891 .891 .891 .891 .953 .953 .953 .953 1.031 1.031 1.031 1.031 1.031 1.031 ** Increase Increase Z Z dimension by .312 .312 for size "0" contact only. only. LL Max. Max. M M +.010 +.010 -.000 -.000 P P Dia. Dia. Max. Max. R R .005 .005 1.588 1.588 1.588 1.588 1.588 1.588 1.588 1.588 1.931 1.931 1.588 1.588 1.931 1.931 1.588 1.588 1.931 1.931 1.931 1.931 1.931 1.931 1.931 1.931 2.009 2.009 2.009 2.009 2.072 2.072 2.072 2.072 2.072 2.072 .562 .562 .562 .562 .562 .562 .562 .562 .750 .750 .562 .562 .750 .750 .562 .562 .750 .750 .750 .750 .750 .750 .750 .750 .812 .812 .812 .812 .875 .875 .875 .875 .875 .875 .557 .557 .682 .682 .807 .807 .807 .807 .807 .807 .932 .932 .932 .932 1.057 1.057 1.057 1.057 1.182 1.182 1.291 1.291 1.432 1.432 1.557 1.557 1.807 1.807 2.057 2.057 2.260 2.260 2.260 2.260 .594 .594 .719 .719 .719 .719 .812 .812 .812 .812 .906 .906 .906 .906 .969 .969 .969 .969 1.063 1.063 1.156 1.156 1.250 1.250 1.375 1.375 1.562 1.562 1.750 1.750 1.938 1.938 2.510 2.510 21 17 S S .031 .031 Y Y Thread Thread Class Class 2 TT Dia. Dia. +.004 +.004 -.002 -.002 ZZ +.050 +.050 -.060 -.060 .875 .875 1.000 1.000 1.000 1.000 1.094 1.094 1.094 1.094 1.188 1.188 1.188 1.188 1.281 1.281 1.281 1.281 1.375 1.375 1.500 1.500 1.625 1.625 1.750 1.750 2.000 2.000 2.250 2.250 2.500 2.500 2.750 2.750 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 8-32NC 8-32NC 8-32NC 8-32NC 8-32NC 8-32NC 8-32NC 8-32NC 10-32NF 10-32NF 10-32NF 10-32NF 10-32NF 10-32NF .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .147 .147 .147 .147 .173 .173 .173 .173 .173 .173 .422 .422 .422 .422 .422 .422 .422 .422 .672 .672 .422 .422 .672 .672 .422 .422 .672 .672 .641* .641* .641* .641* .641* .641* .578* .578* .578* .578* .500* .500* .500* .500* .500* .500* MS/Standard MS3101R inline cable receptacle connecting plug L J Z B F A Thread Y Thread To To complete complete order ordernumber, number,see see"how "howtotoorder" order"pg. pg.59. 70. For For solder solder well welldata, data,see seepage page29. 67. All lockwire holes are .045 dia. min. All lockwire holes are .045 dia. min. Shell Shell Size Size A A Thread Thread Class Class 2A 2A B B Min. Min. Full Full Thread Thread FF Dia. Dia. Max. Max. JJ Dia. Dia. Max. Max. LL Max. Max. Y Y Thread Thread Class Class 22 ZZ .040 .040 8S 8S 10S 10S 10SL 10SL 12S 12S 12 12 14S 14S 14 14 16S 16S 16 16 18 18 20 20 22 22 24 24 28 28 32 32 36 36 40 40 .5000-28UNEF .5000-28UNEF .6250-24NEF .6250-24NEF .6250-24NEF .6250-24NEF .7500-20UNEF .7500-20UNEF .7500-20UNEF .7500-20UNEF .8750-20UNEF .8750-20UNEF .8750-20UNEF .8750-20UNEF 1.0000-20UNEF 1.0000-20UNEF 1.0000-20UNEF 1.0000-20UNEF 1.1250-18NEF 1.1250-18NEF 1.2500-18NEF 1.2500-18NEF 1.3750-18NEF 1.3750-18NEF 1.5000-18NEF 1.5000-18NEF 1.7500-18NS 1.7500-18NS 2.0000-18NS 2.0000-18NS 2.2500-16UN 2.2500-16UN 2.5000-16UN 2.5000-16UN .406 .406 .406 .406 .406 .406 .422 .422 .656 .656 .391 .391 .625 .625 .391 .391 .625 .625 .625 .625 .625 .625 .625 .625 .625 .625 .625 .625 .625 .625 .625 .625 .625 .625 .959 .959 1.026 1.026 1.120 1.120 1.120 1.120 1.120 1.120 1.307 1.307 1.307 1.307 1.432 1.432 1.432 1.432 1.557 1.557 1.744 1.744 1.869 1.869 1.994 1.994 2.166 2.166 2.541 2.541 2.729 2.729 2.979 2.979 .557 .557 .682 .682 .807 .807 .807 .807 .807 .807 .932 .932 .932 .932 1.057 1.057 1.057 1.057 1.182 1.182 1.291 1.291 1.432 1.432 1.557 1.557 1.807 1.807 2.057 2.057 2.260 2.260 2.510 2.510 1.588 1.588 1.588 1.588 1.588 1.588 1.588 1.588 1.931 1.931 1.588 1.588 1.931 1.931 1.588 1.588 1.931 1.931 1.931 1.931 1.931 1.931 1.931 1.931 2.009 2.009 2.009 2.009 2.072 2.072 2.072 2.072 2.072 2.072 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 8-32NC 8-32NC 8-32NC 8-32NC 8-32NC 8-32NC 8-32NC 8-32NC 10-32NF 10-32NF 10-32NF 10-32NF 10-32NF 10-32NF 1.094 1.094 1.094 1.094 1.094 1.094 1.094 1.094 1.532 1.532 1.094 1.094 1.532 1.532 1.094 1.094 1.532 1.532 1.532* 1.532* 1.532* 1.532* 1.532* 1.532* 1.532* 1.532* 1.532* 1.532* 1.532* 1.532* 1.532* 1.532* 1.532* 1.532* ** Increase Increase ZZdimension dimensionby by .312 .312 for forsize size"0" "0"contact contactonly. only. 22 18 MS/Standard MS3102R box mounting receptacle S R B A Thread S N R T 4 Holes L M Z K To To complete complete order order number, number,see see"how "howtotoorder" order"pg. pg.59. 70. For For solder solder well well data, data, see seepage page29. 67. Shell Size A Thread Class 2A B Min. Full Thread K +.020 -.010 L +.000 -.010 M +.010 -.000 N Dia. +.010 -.000 R .005 8S 10S 10SL 12S 12 14S 14 16S 16 18 20 22 24 28 32 36 40 .5000-28UNEF .6250-24NEF .6250-24NEF .7500-20UNEF .7500-20UNEF .8750-20UNEF .8750-20UNEF 1.0000-20UNEF 1.0000-20UNEF 1.1250-18NEF 1.2500-18NEF 1.3750-18NEF 1.5000-18NEF 1.7500-18NS 2.0000-18NS 2.2500-16UN 2.5000-16UN .391 .391 .391 .450 .625 .450 .625 .450 .625 .625 .625 .625 .625 .625 .625 .625 .625 .672 .672 .672 .672 .860 .672 .860 .672 .860 .891 .891 .891 .953 .953 1.031 1.031 1.031 .297 .297 .297 .297 .484 .297 .484 .297 .484 .453 .453 .453 .453 .453 .438 .438 .438 .562 .562 .562 .562 .750 .562 .750 .562 .750 .750 .750 .750 .812 .812 .875 .875 .875 .375 .500 .625 .625 .625 .750 .750 .875 .875 1.000 1.125 1.250 1.375 1.625 1.875 2.062 2.312 .594 .719 .719 .812 .812 .906 .906 .969 .969 1.062 1.156 1.250 1.375 1.562 1.750 1.938 2.188 ** Increase Increase ZZ dimension dimension by by .312 .312 for for size size "0" "0"contact contactonly. only. 23 19 S .031 .031 T Dia. +.004 -.002 Z +.050 -.060 .875 1.000 1.000 1.094 1.094 1.188 1.188 1.281 1.281 1.375 1.500 1.625 1.750 2.000 2.250 2.500 2.750 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .120 .147 .147 .173 .173 .173 .422 .422 .422 .422 .672 .422 .672 .422 .672 .641* .641* .641* .578* .578* .500* .500* .500* MS/Standard MS3106R straight plug L N Z Q J A Thread F Y To complete complete order number, see "how To "how to to order" order" pg. pg.59. 70. For 67. For solder solder well data, see page 29. All lockwire lockwire holes are .045 dia. min. All Shell Shell Size Size 8S 8S 10S 10S 10SL 10SL 12S 12S 12 12 14S 14S 14 14 16S 16S 16 16 18 18 20 20 22 22 24 24 28 28 32 32 36 36 40 40 A A Thread Thread Class Class 2B 2B .5000-28UNEF .5000-28UNEF .6250-24NEF .6250-24NEF .6250-24NEF .6250-24NEF .7500-20UNEF .7500-20UNEF .7500-20UNEF .7500-20UNEF .8750-20UNEF .8750-20UNEF .8750-20UNEF .8750-20UNEF 1.0000-20UNEF 1.0000-20UNEF 1.0000-20UNEF 1.0000-20UNEF 1.1250-18NEF 1.1250-18NEF 1.2500-18NEF 1.2500-18NEF 1.3750-18NEF 1.3750-18NEF 1.5000-18NEF 1.5000-18NEF 1.7500-18NS 1.7500-18NS 2.0000-18NS 2.0000-18NS 2.2500-16UN 2.2500-16UN 2.5000-16UN 2.5000-16UN FF Dia. Dia. Max. Max. .959 .959 1.026 1.026 1.120 1.120 1.120 1.120 1.120 1.120 1.307 1.307 1.307 1.307 1.432 1.432 1.432 1.432 1.557 1.557 1.744 1.744 1.869 1.869 1.994 1.994 2.166 2.166 2.541 2.541 2.729 2.729 2.979 2.979 JJ .005 .005 .531 .531 .531 .531 .531 .531 .531 .531 .719 .719 .531 .531 .719 .719 .531 .531 .719 .719 .719 .719 .719 .719 .719 .719 .719 .719 .719 .719 .719 .719 .719 .719 .719 .719 Increase Z dimension by .312 .312 for for size "0" contact only. ** Increase LL Max. Max. 1.057 1.057 1.057 1.057 1.057 1.057 1.057 1.057 1.212 1.212 1.057 1.057 1.212 1.212 1.057 1.057 1.212 1.212 1.212 1.212 1.212 1.212 1.212 1.212 1.291 1.291 1.291 1.291 1.353 1.353 1.353 1.353 1.353 1.353 20 24 N N Dia. Dia. Max. Max. .557 .557 .682 .682 .807 .807 .807 .807 .807 .807 .932 .932 .932 .932 1.057 1.057 1.057 1.057 1.182 1.182 1.291 1.291 1.432 1.432 1.557 1.557 1.807 1.807 2.057 2.057 2.260 2.260 2.510 2.510 Q Q Dia. Dia. Max. Max. .741 .741 .869 .869 .946 .946 .995 .995 .995 .995 1.123 1.123 1.123 1.123 1.250 1.250 1.250 1.250 1.333 1.333 1.461 1.461 1.588 1.588 1.715 1.715 1.968 1.968 2.209 2.209 2.463 2.463 2.719 2.719 Y Y Thread Thread Class Class 22 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 6-32NC 8-32NC 8-32NC 8-32NC 8-32NC 8-32NC 8-32NC 8-32NC 8-32NC 10-32NF 10-32NF 10-32NF 10-32NF 10-32NF 10-32NF ZZ .045 .045 .562 .562 .562 .562 .562 .562 .562 .562 .812 .812 .562 .562 .812 .812 .562 .562 .812 .812 .812* .812* .812* .812* .812* .812* .812* .812* .812* .812* .812* .812* .812* .812* .812* .812* AC Series/MS insert availability Insert Arrangement 10SL-3 10SL-4 12S-3 12S-4 12-5 14S-1 14S-2 14S-4 14S-5 14S-6 14S-7 14S-9 14S-10 14S-12 14S-A7 14-3 16S-1 16S-3 16S-4 16S-5 16S-6 16S-8 16-2 16-7 16-9 16-10 16-11 16-12 16-13 16-59 18-1 18-3 18-4 18-5 18-6 18-7 18-8 18-9 18-10 18-11 18-12 18-13 18-14 18-15 18-16 18-17 18-19 18-20 18-22 18-24 18-29 Service Rating A A A D D A Inst. D Inst. Inst. A A Inst. A A A A B D A A A E A A A A A A A A/Inst. D D D D B A Inst. A A A A A A C Inst. A A D A/Inst. A TotalContact Size Contacts 0 4 8 12 16 33 22 22 11 11 33 4 4 11 5 5 6 6 33 22 4 4 33 77 11 77 11 22 33 33 55 11 312 42 2 33 22 11 22 44 10 10 22 44 32 1 11 11 81 7 7 2 5 44 55 66 4 1 3 211 44 1 1 7 2 5 10 10 55 33 10 10 55 Insert Arrangement 18-30 18-31 20-2 20-3 20-4 20-6 20-7 20-8 20-9 20-11 20-12 20-14 20-15 20-16 20-17 20-18 20-19 20-20 20-21 20-22 20-23 20-24 20-25 20-27 20-29 20-30 20-33 20-51 20-57 20-58 20-59 20-66 20-79 22-1 22-2 22-4 22-5 22-6 22-7 22-8 22-9 22-10 22-11 22-12 22-13 22-14 22-15 22-16 22-17 22-18 Service Rating A A D D D D D/A Inst. D/A Inst. A A A A A A A A A A A A Inst. A A Inst. A A A A A A D/A D D A D D E E E E B D D/A A E/A A D/A D/A TotalContact Size Contacts 0 4 8 12 16 55 55 1 1 33 44 33 8 8 6 2 4 8 1 7 13 13 211 5 2 3 77 92 7 65 1 93 6 33 413 91 8 633 22 422 13 13 14 14 17 17 13 13 11 11 3 3 77* 105 5 3 3* 65* 1 8 1 7 2 2 3 3 4 2 2 62 4 321 1 1 22 33 44 22 523 5 4 1 19 19 6 5 1 93 6 9 1 8 8 8 * Crimp contacts accommodate wire the same size as the contact as well as wire of the next smaller, even size. Arrangements identified with an asterisk (*) are exceptions. See insert arrangement drawings on pages 32-53 for application wire size. 25 AC Series/MS insert availability, cont. Contact Size Insert Total Arrange Service Con- Coax** ment Rating tacts 4/0 2/0 0 4 8 12 16 0 4 8 12 22-19 A 14 14 22-20 A 9 9 22-21 A 3 12 22-22 A 4 4 22-23 D/A 8 8 22-24 D/A 6 2 4 22-27 D/A 9 1 8 22-28 A 7 7 22-33 D/A 7 7 22-34 D 5 3 2 22-36 D/A 8 8 22-63 A 12 4 8 22-65 D/A 8 8* 22-70 A 13 8 5 22-80 A 3 3* 24-2 D 7 7 24-3 D 7 2 5 24-5 A 16 16 24-6 D/A 8 8 24-7 A 16 2 14 24-9 A 22 24-10 A 7 7 24-11 A 9 3 6 24-12 A 523 24-16 D/A 7 1 3 3 24-17 D 5 2 3 24-19 A 12 12 24-20 D 11 2 9 24-21 D 1019 24-22 D 4 4 24-27 E 7 7 24-28 Inst. 24 24 24-51 A 5 5 24-52 Hi-Volt 1 1 24-53 A 5 5 24-58 A 13 3 3 7 24-59 A 14 7 7 24-60 A 7 7* 24-65 A 1511 4 24-66 D 7 7 24-67 Inst. 19 19 24-71 A 7 7* 24-75 A 7 7* 24-79 A 5 5 24-80 Inst. 23 23 24-84 A 19 1 18 24-96 Inst. 28 28 24-AJ A 25 25 28-1 D/A 9 3 6 28-2 D 14 2 12 Contact Size Insert Total Arrange Service Con- Coax** ment Rating tacts 4/0 2/0 0 4 8 12 16 0 4 8 12 28-3 E 3 3 28-4 E/D 9 2 7 28-5 D 521 2 28-6 D 3 3 28-7 D 2 2 28-8 E/D/A 12 2 10 28-9 D 12 6 6 28-10 D/A 7 2 2 3 28-11 A 22 4 18 28-12 A 26 26 28-13 A 26 26 28-15 A 35 35 28-16 A 20 20 28-17 B/D/A 15 15 28-18 C/D/A/Inst. 12 12 28-19 B/D/A 10 4 6 28-20 A 1410 4 28-21 A 37 37 28-22 D 6 33 28-51 A 1212 28-59 A 17 7 10 28-66 A 16 2 14 28-72 Coax 3 3 28-74 A 16 7* 9 28-75 A 16 7* 9 28-79 A 1679 28-82 D 6 2 4 28-84 A 9 9 28-AY A 9 45 32-1 E/D 5 2 3 32-2 E 5 32 32-3 D 91 22 4 32-4 A/D 14 2 12 32-5 D 2 2 32-6 A 23 2 3 2 16 32-7 Inst./A 35 7 28 32-8 A 30 6 24 32-9 D 142 12 32-10 E/B/D/A 7 2 2 3 32-12 A/D 15 5 10 32-13 D 23 5 18 32-14 D 1313 32-15 D 826 32-16 A 23 2 3 2 16 32-17 D 4 4 32-22 A 54 54 32-25 A 2525 32-31 A 31 31 32-48 Inst. 48 48 32-52 D 826 32-53 Inst./E 42 5 37 * Crimp contacts accommodate wire the same size as the contact as well as wire of the next smaller, even size. Arrangements identified with an asterisk (*) are exceptions. See insert arrangement drawings on pages 32-53 for application wire size. 26 AC Series/MS insert availability, cont. Contact Size Insert Total Arrange Service Con- Coax** ment Rating tacts 4/0 2/0 0 4 8 12 16 0 4 8 12 32-56 A 306* 24 32-57 Coax 8 6 2 32-58 Coax 4 4 32-59 A 42 40 2 32-60 A 23 15 8 32-62 Coax 23 2 1 2 16 2 32-64 Inst. 54 54 32-68 A 16 12 4 32-73 A 46 46 32-75 Coax 9 2 7 32-76 A 1919 32-79 D 5 4 1 32-82 A 164 12 32-AF A 55 55 36-1 D 22 4 18 36-3 D 633 36-4 D/A 3 3 36-5 A 4 4 36-6 A 6 2 4 36-7 A 47 7 40 36-8 A 47 1 46 36-9 A 31 1 2 14 14 36-10 A 48 48 36-11 A 48 48 36-12 A 48 48 36-13 E/A 17 2 15 36-14 D 16 5 5 6 36-15 D/A 35 35 36-16 A 47 7 40 36-17 A 47 7 40 36-18 A 31 1 2 14 14 36-20 A 34 2 2 30 36-51 D 4 2 2 36-52 A 52 52 36-54 A 39 8 31 36-55 A 39 8* 31 36-59 A 533* 50 36-60 A 477* 40 36-64 Coax 4 4 36-65 Coax 4 4 36-71 A 53 3 50 36-73 Coax 7 7 36-74 A 44 43 1 36-75 A 48 48* 36-76 A 47 47 36-77 D 7 7 36-78 A 14 12 2 36-79 A 2020 36-80 A 2020* Contact Size Insert Total Arrange Service Con- Coax** ment Rating tacts 4/0 2/0 0 4 8 12 16 0 4 8 12 36-83 Coax 7 7 36-85 A/D 35 35* 36-97 C 1 1 36-99 D 12 3 3 3 3 36-AF A 48 48 40-1 D 30 6 24 40-5 A 5 5 40-9 A 47 1 22 24 40-10 A 29 4 916 40-30 A 30 1 29 40-35 D 3535 40-53 A 60 60 40-56 A 85 85 40-57 E 4 4 40-61 A 59 1 3 55 40-62 A 60 60 40-63 A 61 61* 40-64 Coax 36 3 20 13 40-66 Coax 4 4 40-67 A 11 1 10 40-68 A 21 21 40-70 A 61 61 40-72 A 11 1 10 40-73 A 61 61 40-74 A 6 14 1 40-75 E 541 40-80 A 11 10 1 40-81 A 62 62* 40-82 A 62 62 40-85 A 60 60 40-86 E 44 40-87 D 7 7 40-AD A 844 40-AG A 38 38 40-AP E 2 2 40-AR Inst. 13 3 3 7 40-AS A 4025 15 40-AT A 43 1 24 18 40-AU A 14 3 10 1 40-AV D 3 3 *Crimp contacts accommodate wire the same size as the contact as well as wire of the next smaller, even size. Arrangements identified with an asterisk (*) are exceptions. See insert arrangement drawings on pages 32-53 for application wire size. 27 AC Series/MS insert alternate positioning To avoid cross-plugging problems in applications requiring the use of more than one connector of the same size and arrangement, alternate rotations are available as indicated in the accompanying charts. The following insert arrangements have the same alternate insert rotations for W, X, Y and Z, which are: Degrees W X Y 80 110250 As shown in the diagram below, the front face of the pin insert is rotated within the shell in a clockwise direction from the normal shell key. The socket insert would be rotated counterclockwise the same number of degrees in respect to the normal shell key. B A B A A B A B 16-7 18-5 18-9 18-13 18-14 20-7 20-8 20-9 20-12 20-14 20-16 Position W Position X Position Y Position Z View looking into front face of pin insert or rear of socket insert. InsertDegrees Arrangement W X Y 10-SL-4 12S-3 14S-2 14S-5 14S-7 14S-9 16-9 16-10 16-11 16-13 16S-1 16S-4 16S-5 16S-6 16S-8 18-1 18-3 18-4 18-8 18-10 18-11 18-12 18-15 18-20 18-22 18-29 20-3 20-4 20-5 20-6 20-15 20-17 20-18 63 70 - - 90 70 35 90 35 35 80 35 70 90 - 70 35 35 70 - - 80 - 90 70 90 70 45 35 70 80 90 35 - 145 120 110 180 145 110 180 110 110 - 110 145 180 170 145 110 110 - 120 170 - 120 180 145 180 145 110 110 145 - 180 110 - 215 240 - 270 215 250 270 250 250 - 250 215 270 265 215 250 250 - 240 265 - 240 270 215 270 215 250 250 215 - 270 250 Z - 290 - - - 290 325 - 325 325 280 325 290 - - 290 325 325 290 - - 280 - - 290 - 290 - 325 290 280 - 325 InsertDegrees Arrangement W X Y 20-19 20-21 20-23 20-24 20-27 20-29 22-1 22-2 22-4 22-5 22-8 22-9 22-10 22-11 22-13 22-20 22-22 22-23 22-27 22-28 22-63 24-2 24-9 24-10 24-11 24-22 24-27 28-2 28-3 28-5 28-6 28-7 28-12 90 35 35 35 35 80 35 70 35 35 35 70 35 35 35 35 - 35 80 80 20 80 35 80 35 45 80 35 70 35 70 35 90 180 110 110 110 110 - 110 145 110 110 110 145 110 110 110 110 110 - - - - - 110 - 110 110 - 110 145 110 145 110 180 28 270 250 250 250 250 - 250 215 250 250 250 215 250 250 250 250 250 250 250 - - - 250 - 250 250 - 250 215 250 215 250 270 20-20 20-22 22-3 22-6 22-12 22-14 22-15 22-16 22-17 22-18 22-19 Z - 325 325 325 325 280 325 290 325 325 325 290 325 325 325 325 - - 280 280 - 280 325 280 325 - 280 325 290 325 290 325 - Z 280 22-21 22-24 22-25 22-29 22-33 22-34 24-1 24-3 24-4 24-5 24-6 24-7 24-12 24-14 24-16 24-17 24-20 24-21 24-28 24-AJ 28-1 28-4 28-8 28-9 28-10 28-11 28-14 28-15 28-16 28-17 28-19 28-20 28-21 32-1 32-3 32-4 32-6 32-9 32-10 32-12 32-13 32-22 32-31 32-AF InsertDegrees Arrangement W X Y 28-18 28-22 28-AY 32-2 32-5 32-7 32-8 32-14 32-15 32-17 32-25 32-48 32-64 32-68 32-82 36-3 36-4 36-5 36-6 36-9 36-10 36-14 36-15 36-AF 40-1 40-5 40-9 40-10 40-35 40-AD 40-AG 40-AP 40-AV 70 70 45 70 35 80 80 65 35 45 60 80 80 30 30 70 70 - 35 80 80 90 60 65 65 33 65 65 70 45 37 35 90 145 145 110 145 110 125 125 130 110 110 120 - 100 - - 145 145 120 110 125 125 180 125 - 130 - 125 125 130 - 74 110 180 215 215 250 215 250 235 235 230 250 250 - - 110 - - 215 215 240 250 235 235 270 245 - 235 - 225 225 230 - 285 250 270 36-1 36-7 36-8 36-13 40-AR 40-AS 40-AT 40-AU Part Numb 10-40569 10-597107-1 or 10-5974 10-40599 10-597107-1 or 10-5974 10-33646 10-597107-1 10-35531 10-35532 10-35529 Z 10-35530 290 10-35527 290 - 10-35528 290 325 280 280 295 280 - - - 250 - - 290 290 - 325 280 280 - 305 - 300 270 310 310 290 - 322 325 - AC Series/MS solder contacts Machined copper alloy contacts in a full range of sizes, with closed entry socket design in the size 12 and 16 contacts. A heavy silver-plated finish is deposited on all solder contacts for maximum corrosion resistance, maximum current carrying capacity and low millivolt drop. SOLDER CONTACTS* t ber Pin/ Socket Mating End Size Wire Barrel Size Allowable Wire Size Test Current** Amps Pin 16 13 16 Short 16 18 10 161 Socket 20 7.5 424-001 22 5 Pin 16 13 16 Long 16 18 10 171 Socket 20 7.5 422-001 22 5 Pin 12 12 12 23 131 Socket 14 17 Pin 8 8 8 46 Socket 10 33 Pin 4 4 4 80 Socket 6 60 Pin 0 150 0 0 1 125 Socket 2 100 * Solder Wells Filled ** Contact ratings as stated are test ratings only. The connector may not withstand full rated current through all contacts continuously. Please note that the electrical data given is not an establishment of electrical safety factors. This is left entirely in the designer's hands as he can best determine which peak voltage, switching surges, transients, etc. can be expected in a particular circuit. The 10SL, 12S, 14S and 16S connectors require short contacts. CONTACT ARRANGEMENT SERVICE RATING Recommended Operating Voltage* MS Service at Sea Level Rating D C AC (RMS) Inst. A D E B C 250 700 1250 1750 2450 4200 200 500 900 1250 1750 3000 Effective Creepage Mechanical Distance Spacing Nom. Nom. 1/16 1/8 3/16 1/4 5/16 1 1/16 1/8 3/16 1/4 5/16 * The values listed in Table I represent operating values which include a generous safety factor. It may be necessary for some applications to exceed the operating voltages listed here. If this is necessary, designers will find Table II useful for determining the degree to which the recommended values of Table I can be exceeded. ALTITUDE VOLTAGE DERATING** CHART Nominal Standard Sea Pressure Altitude Pressure Altitude Distance Level Conditions 50,000 Feet 70,000 Feet Minimum Minimum Minimum MS Flashover Test Flashover Test Flashover Test Service Voltage Voltage Voltage Voltage Voltage Voltage Rating Airspace Creepage AC (RMS) AC (RMS) AC (RMS) AC (RMS) AC (RMS) AC (RMS) Inst. 1/32 1/16 1400 1000 550 400 325 260 A 1/16 1/8 2800 2000 800 600 450 360 D 1/8 3/16 3600 2800 900 675 500 400 E 3/16 1/4 4500 3500 1000 750 550 440 B 1/4 5/16 5700 4500 1100 825 600 480 C 5/16 1 8500 7000 1300 975 700 560 Not corrected for changes in density due to variations in temperature ** No attempt has been made to recommend operating voltages. The designer must determine his own operating voltage by the application of a safety factor to the above derating chart to compensate for circuit transients, surges, etc. 29 AC Series/MS crimp contacts Machined from copper alloys and silver-plated for maximum corrosion resistance, with a minimum millivolt drop and a maximum current carrying capacity, the size 16 and 12 socket contacts are of the closed entry design. Crimp contacts are available for all insert arrangements and are identified with a Amphenol(R) proprietary number. Gold plated contacts are also available. (See how to order on page 59). CRIMP CONTACTS* Part Pin/ Mating End Wire Barrel Allowable Required Wire Test Current** Number Socket Size Size Wire Size Adapter Sleeve Amps 10-40553 Pin 16 - 13 16 Short 16 18 - 10 10-597109-161 Socket 20 - 7.5 22* 10-74696-6 5 10-40557 Pin 16 - 13 16 Long 16 18 - 10 10-597109-171 Socket 20 - 7.5 22* 10-74696-6 5 10-40561 Pin 12 12 12 - 23 10-597109-131 Socket 14 - 17 10-40792 Pin 8 8 8 - 46 10-40793 Socket 10* 10-74696-1 33 10-40564 Pin 4 4 4 - 80 10-40565 Socket 6* 10-74696-2 60 10-581806-000 Pin 0 0 0 - 150 10-581808-000 Socket 2* 10-74696-7 125 * When using wire adapter sleeve shown ** Contact ratings as stated are test ratings only. The connector may not withstand full rated current through all contacts continuously. Please note that the electrical data given is not an establishment of electrical safety factors. This is left entirely in the designer's hands as he can best determine which peak voltage, switching surges, transients, etc. can be expected in a particular circuit. The 10SL, 12S, 14S and 16S connectors require short contacts. Additional contact variations are available; consult Amphenol, Sidney NY for information. CONTACT ARRANGEMENT SERVICE RATING Recommended Operating Voltage* MS Service at Sea Level Rating D C AC (RMS) Inst. A D E B C 250 700 1250 1750 2450 4200 200 500 900 1250 1750 3000 Effective Creepage Mechanical Distance Spacing Nom. Nom. 1/16 1/8 3/16 1/4 5/16 1 1/16 1/8 3/16 1/4 5/16 ALTITUDE VOLTAGE DERATING** CHART Nominal Standard Sea Pressure Altitude Pressure Altitude Distance Level Conditions 50,000 Feet 70,000 Feet Minimum Minimum Minimum MS Flashover Test Flashover Test Flashover Test Service Voltage Voltage Voltage Voltage Voltage Voltage Rating Airspace Creepage AC (RMS) AC (RMS) AC (RMS) AC (RMS) AC (RMS) AC (RMS) Inst. 1/32 1/16 1400 1000 550 400 325 260 A 1/16 1/8 2800 2000 800 600 450 360 D 1/8 3/16 3600 2800 900 675 500 400 E 3/16 1/4 4500 3500 1000 750 550 440 B 1/4 5/16 5700 4500 1100 825 600 480 C 5/16 1 8500 7000 1300 975 700 560 Not corrected for changes in density due to variations in temperature. ** No attempt has been made to recommend operating voltages. The designer must determine his own operating voltage by the application of a safety factor to the above derating chart to compensate for circuit transients, surges, etc. 30 RADSOK(R) Technology RADSOK(R) Technology Advantages RADSOK(R) Derating Chart - Temperature vs. Current RADSOK'S twisted grid configuration allows for 50% more current to pass through the same size pin, while providing increased reliability, ampacity and cycle durability as well as lower insertion force, T-rise and voltage drop. Based on single conductors in free air. Wire cross-section same size as pin contact crosssectional area. * HIGH RELIABILITY Unique RADSOK(R) design and construction technology create an electrical contact interface that exceeds typical interconnect requirements. Applications in aerospace, medical, industrial, automotive, mining, offshore, and other harsh environments depend on the high reliability of Amphenol's RADSOK(R) technology. * LOW CONTACT ENGAGEMENT/SEPARATION FORCES The hyperbolic lamella socket contact construction distributes normal forces over a high percentage of the mating pin surface. This creates a smooth, even engagement effort. This force distribution also contributes to excellent performance in vibration applications with resistance to typical fretting corrosion. * LOW CONTACT RESISTANCE The large interface area between the socket lamella and pin surface result in very low contact resistance, enabling the RADSOK(R) contacts' high current ratings compared to traditional power contact designs. * HIGH MATING CYCLE DURABILITY RADSOK(R) contacts with typical silver plating finishes have demonstrated survival of 20,000 mating cycles. Specialized plating and contact lubricants can extend cycle life to 200,000 matings or higher. Even with continuous exposure to harsh environmental abuse (salt, sand, and high humidity), RADSOK(R) contacts have been tested to maintain low contact resistance beyond 10,000 mating cycles. RADSOK(R) Socket Table CRIMP CONTACT DATA RADSOK Part Number (R) Socket Contact * Mating Size Wire Barrell Size Allowable Wire Size Required Wire Adapter Sleeve Test Current** AMPS Silver Gold 10-639140-121 10-639140-1231 12 12-14 12 14 - 35 *** 10-639140-081 10-639140-0831 8 8 8 10* 10-74696-1 70 *** 10-639140-041 10-639140-0431 4 4 4 6* 10-74696-2 120 *** 10-639140-001 10-639140-0031 0 0 0 2* 10-74696-7 250 *** When using wire adapter sleeve shown ** Contact ratings as stated are test ratings only. The connector may not withstand full rated current through all contacts continuously. Please note that the electrical data given is not an establishment of electrical safety factors. This is left entirely in the designer's hands as he can best determine which peak voltage, switching surges, transients, etc. can be expected in a particular circuit. *** Consult Amphenol Industrial for test current at these wire sizes. 31 AC Series/MS contact arrangements front face of pin insert or rear face of socket insert illustrated Insert Arrangement Service Rating Number of Contacts Contact Size Front of Socket Insert Front of Socket Insert A A 10SL-3 3 16 10SL-4 12S-3 12S-4 12-5 14S-1 2 2 1 1 3 16 A D 16 D 16 14S-2 A 12 Inst. 4 16 16 Insert Arrangement 14S-4 14S-5 14S-6 14S-7 14S-9 Number of Contacts 1 5 6 3 2 Service Rating Contact Size Insert Arrangement Service Rating Number of Contacts Contact Size D 16 Inst. Inst. 14S-10 A Inst. 4 16 16 16 16 16 14S-12 14S-A7 14-3 16S-1 16S-3 16S-4 3 7 1 7 1 100 Rotation of 14S-7 A A A 16 16 Insert Arrangement 16S-5 16S-6 16S-8 Number of Contacts 3 3 5 Service Rating A 100 Rotation of 14S-2 A 8 A A A B 16 D 2 16 16 16-216-716-9 EAA 1 12 22 Contact Size 16 16 16 12 816 1216 CONTACT LEGEND 32 16 12 8 4 0 AC Series/MS contact arrangements front face of pin insert or rear face of socket insert illustrated Insert Arrangement Service Rating Number of Contacts Contact Size 16-10 A 3 12 Insert Arrangement 18-3 Number of Contacts 2 Service Rating Contact Size D 12 Insert Arrangement18-9 Service RatingInst. Number of Contacts Contact Size 25 1216 Insert Arrangement 18-15 Number of Contacts 4** Service Rating A 16-11 16-12 2 1 A 16-13 A 12 2* 4 1216 18-10 18-11 A 4 18-12 6 1 17 8 1216 18-13 18-14 13 11 18-19 18-20 18-22 10 5 3 16 18-16 18-17 2 5 BA A A A 5 1 10 18-718-8 4 12 CInst. 16 1 A 12 12 D 21 16 B, C, F, G = A; bal. = Inst. 18-6 DD 18-1 A 4 12 18-418-5 4 16-59 A 812 A 416 A D Contact Size 12 12 1216 16 16 16 CONTACT LEGEND *A = Iron: B = Constantan **A, C = Iron; B, D = Constantan 33 16 12 8 4 0 AC Series/MS contact arrangements front face of pin insert or rear face of socket insert illustrated G 250 H A J F E Insert Arrangement Service Rating Number of Contacts Contact Size B I D C 250 Rotation of 18-1 18-24 18-29 B, C, F, G = A; Bal. = Inst. A 16 16 10 20-4 20-6 Number of Contacts 4 3 Contact Size D 12 Contact Size 16 416 5 5 1 D 16 A 20-3 D 16 D 3 0 12 20-720-820-9 A, B, H, G = D; C, D, E, F = AInst. 8 16 16 24 20-11 H = D; Bal. = A Inst. 17 816 13 1216 16 20-1520-1620-1720-18 Service RatingAA 11 20-2 A Insert Arrangement20-1220-14 Number of Contacts 260 Rotation of 18-20 18-31 5 Insert Arrangement Service Rating 110 Rotation of 18-20 18-30 AAAA 23 7 812 12 27 1216 CONTACT LEGEND 34 51 36 1216 16 12 12 8 4 0 AC Series/MS contact arrangements front face of pin insert or rear face of socket insert illustrated Insert Arrangement 20-1920-2020-2120-22 Service Rating Number of Contacts 3 Contact Size 13 8 M N L B Service Rating Number of Contacts Contact Size Insert Arrangement Service Rating Number of Contacts Contact Size E G D 18 412 100 Insert Arrangement 20-2320-24 AAAA A C H 1216 M L F K K J J A B T P S R H F G M D N E 250 100 Rotation of 20-11 20-25 20-27 20-29 Inst. 13 16 A A 14 16 20-5720-58 12 for #14 or 16 wire 55 12 16 G D C E H A 816 F K J 250 Rotation of 20-11 20-30 20-33 20-51 13 11 3* A 16 A 16 8 20-5920-6620-79 A A 7* L B 22 8 Inst. 17 16 2 816 C N AA 33 A A 3* 8 for #10 or 12 wire 7*1* 16 12 for #10 wire CONTACT LEGEND 35 H = D; Bal. = A 15 16 12 16 12 for #16 wire 8 4 0 AC Series/MS contact arrangements front face of pin insert or rear face of socket insert illustrated Insert Arrangement 22-1 Number of Contacts 2 Service Rating 22-222-422-522-6 D Contact Size 3 8 22 8 22-8 22-9 22-10 Number of Contacts 2 3 4 E Contact Size L K J T Number of Contacts Contact Size V S G Service Rating N A P R F B 19 16 1 816 0 22-1122-1222-13 BD 2 16 E = D; A, B, C, D = A 23 16 41 816 1216 G A F C D H E E D 22-1422-1522-1622-17 A E 21 1216 E 12 M U H Insert Arrangement E 12 24 812 Insert Arrangement Service Rating 22-7 DADD D = E; A, B, C, E, F = A 51 1216 C 22-18 A A = D; Bal. = A A, B, F, G, H = D; C, D, E = A 1216 1216 16 36 CONTACT LEGEND 36 B 18 16 12 8 8 4 0 AC Series/MS contact arrangements front face of pin insert or rear face of socket insert illustrated A K J L P H B M G F Insert Arrangement 22-19 Number of Contacts 14 Service Rating Contact Size C D N E A 16 22-20 22-21 9 1 2 16 Number of Contacts Contact Size C, D, E = D; A, B, F = A J = D; Bal. = A 1216 816 24 22-28 18 Number of Contacts Contact Size 22-3622-63 12 8 22-3322-34 16 G D 7 J A H B H P F C K L 32 1216 A B M C N E D 22-6522-70 H = D; Bal. = A** A 8 12 12 D Service Rating 8 A, B, C, D = D; E, F, G = A E Insert Arrangement H =D; Bal = A A 7 F 22-23 A 4 0 16 Insert Arrangement22-2422-27 Service Rating 22-22 A A 22-80 H = D; Bal. = A A 48 8* 12 16 12 for #14 or 16 wire * Solderless ** A, C, E, G = Iron B, D, F, H = Constantan CONTACT LEGEND 37 A 85 3* 12 16 16 8 for #10 or 12 wire 12 8 4 0 AC Series/MS contact arrangements front face of pin insert or rear face of socket insert illustrated F F A G E F B G J M P C D 7 Contact Size B A F E E A B Insert Arrangement 24-9 Number of Contacts 2 Service Rating Contact Size 8 D N C F E A Service RatingD Number of Contacts Contact Size 23 1216 C D H C K H F K E 1 412 B L A H C G D J A J B G J 8 B E F D A D C B E 24-22 AD D 29 1216 D 19 4 816 CONTACT LEGEND 38 3 16 C K 24-1924-20 24-21 16 3 12 D F 12 24-16 A, B, F, G = D; C, D, E = A 23 812 L Insert Arrangement24-17 E B H A B G C 36 M E E A F A I 8 F 214 C E 7 G 1216 A A A 4 B H 24-1024-1124-12 A D 24-624-7 G C C A, G, H = D; Bal. = A A D D B N O 12 B D I C M P D 16 A G A L K B J R 16 1216 A H N A 25 12 K G F H 24-5 D D Number of Contacts E S 24-224-3 Service Rating B C D L C D Insert Arrangement G E B A A 8 16 12 8 4 0 AC Series/MS contact arrangements front face of pin insert or rear face of socket insert illustrated A A F K B F C G L R G E E B N M S D H T J P E Q A D V U W X Y Z 24-27 24-28 24-51 Number of Contacts 7 24 5* E Inst. 16 16 H P N M J F D M L J R H Contact Size 3 8 E H S T J R V Insert Arrangement Service Rating Number of Contacts Contact Size N U K D P F L A E B J D C D N M G E 12 16 24-66 D 11 4 8 for #10 or 12 wire 7 12 16 12 90 C B C D D AA 7* A F E G A F B E G A B E E A D K B R D C D C Inst. A A 2* 5* 8 8 for #10 or 12 wire 5 2 8 8 for #16 wire CONTACT LEGEND 39 B C P E A F B 24-6024-65 24-6724-7124-75 12 R F A M S H C 8 L K A G A A L 19 5* 12 K 7 7 12 16 F G 7 1 B, E for AN#10 or 12 wire Service Rating AA 3 24-53 Hi-Volt B E 24-52 A Insert Arrangement 24-5824-59 Number of Contacts C A, C, D for AN #8 wire F A B P N K E C B C Insert Arrangement Contact Size A D C D Service Rating E B C B F L C D G M S H N T W X U 24-80 5 23 Inst. 8 16 Q V Z 24-79 A J P 16 12 8 4 0 AC Series/MS contact arrangements front face of pin insert or rear face of socket insert illustrated E F R S G H P V T K 14 12 B A L 10 1 24 3 5 19 20 9 M L 1 18 S C G Insert Arrangement J Number of Contacts Contact Size A E 8 1216 M L F E D J K B C F 2 B C C M B L E D 1 28-628-7 D D 32 4 4 A G E B P V R W C D J N U K L S X D C A G B H a N C K I Number of Contacts Contact Size L, M = E; B = D; Bal. = A 210 1216 D G = D; Bal. = A 66 2 1216 4 2 3 8 12 40 d D V W X J C U E F G H A 418 26 1216 16 B T 28-12 A CONTACT LEGEND b Y L A S Z M D M T R P E F Insert Arrangement28-828-9 28-1028-11 Service Rating A B 2 F A K G 212 1216 B 4 12 16 J H A, J, E = D; Bal. = A D F 27 A D E A E D G, P, S = E; Bal. = D H C N 36 A B E G M F D E B P H 812 D 3 A L G F 28-328-4 28-5 Service Rating C V 16 C B G Q 25 A P K Z Y a B J Inst. 16 A P A 24-AJ28-128-2 28 Contact Size 1212 (Coax) RG-188/U or RG-174/U N U X 24-96 J H T H D S W A Number of Contacts C G F R 6 7 8 E K 4 25 18 26 B A 2 17 28 21 Insert Arrangement 24-84 Service Rating 16 22 27 11 M 15 23 13 C N U J 90 D 16 12 8 4 0 AC Series/MS contact arrangements front face of pin insert or rear face of socket insert illustrated 100 R P a N b Z M K D V E W X J U G F B C R E A B E J F G 28-17 A R = B; M, N, P = D; A to L = A 16 16 15 A J N E H P B K C L M G G H F N C M K C E M P 20 L K L D 28-16 B D J A G N P C H D F D E 28-1828-1928-20 M = C; G, H, J, K, L = D; A, B = A; Bal = Inst. H, M = B; A, B = D; Bal.= A 12 K S B A T U n r R Z X e k j p J P d C D W V h g H N c b a C M L 104 1216 G F A 46 16 E Contact Size M Q 35 M Contact Size Number of Contacts m B L R 16 A H Service Rating H A V A J Insert Arrangement S 28-15 26 K T k l 16 L W h f j A Contact Size g e d F J c b a N V U T Z Y G H Number of Contacts Number of Contacts X S 28-13 Service Rating Service Rating R 100 Rotation of 28-12 Insert Arrangement Insert Arrangement P C U d Y L H B T K A B C D E F G J K L M A S J A E 28-2128-22 P F E R A L M M L B K N D s A H B f m F 1216 C N S T B E D U C J F D H K 28-5128-59 A DA A 37 16 3 3 416 12 CONTACT LEGEND 41 7 10 12 1216 16 12 8 4 0 AC Series/MS contact arrangements front face of pin insert or rear face of socket insert illustrated R P N C S L E M B L A T K F C H J Insert Arrangement 28-66 L N P A B R 1 D S H F 9* 4 (Coax) RG-59 A/U K J S H F 3 16 4* P A B R D S H F C E 4 E 16 8 for #10 wire B F H J D 28-8428-AY A A 9 45 8 E 416 B A A B E G E 812 A C A D B C I 5 6 16 8 D C E F A F K G B L C B C 9* 7* 8 for #10 wire A 24 E 3* 8 G F 97 D N K C Service Rating A D Contact Size M T J E H 2 Insert Arrangement28-7928-82 Number of Contacts L C D 3 8 12 M T B R - A A 2 14 Contact Size A 28-7228-7428-75 Service RatingA Number of Contacts P K J B N M T A D O H G D D J H C E J M N Insert Arrangement32-132-232-332-4 Service Rating D Number of Contacts A = E; B, C, D, E = D E D 23 32 1 22 4 CONTACT LEGEND 42 F, J, K, N = A; Bal. = 212 16 12 8 4 0 AC Series/MS contact arrangements front face of pin insert or rear face of socket insert illustrated A K A C E B G I H L P D J M O N R S T U W B e j Z T M a g V X Y L Z B d C H a e D I Y c A G N U H N U I O V L S A B F K R X D E J P W b O V Insert Arrangement F b M T E K S f k J R X d h P W c F C G 32-532-632-732-8 Service Rating D A Number of Contacts 2 Contact Size 2 0 32 4 A 812 F B D H E F I M 624 1216 1216 A A G B B E D H F M G J K D K C L M B R Y H P C S V N O A P W K J N N X L G J L 728 16 C E C A, B, h, j = Inst.; Bal = A A 16 Z T U D E F G Insert Arrangement 32-9 32-1032-1232-13 Service Rating D Number of Contacts A, F = E; G = B; B, E = D; C, D = A 212 Contact Size 2 416 4 1 10 12 6 100 5 C C D 4 510 E K E F 518 1216 3 8 C, D, E, F, G = A; Bal. = D D 8 16 B 13 7 3 A 2 11 9 2 I P O H A B G H L M 1216 D J F U V X W A C B S T G D N R 100 Rotation of 32-6 Insert Arrangement Service Rating Number of Contacts Contact Size 32-1432-1532-16 32-17 DDA 13 12 26 012 2 4 32 812 CONTACT LEGEND 43 D 16 4 16 16 4 12 8 4 0 AC Series/MS contact arrangements front face of pin insert or rear face of socket insert illustrated F S C K N T X c b m g s AB n w A L O U Y h B D G M P j AA AD AG AF a k 11 W f q u x R e d 13 12 J V Z p t z E H 22 21 26 25 12 J 20 22 10 9 h q U c s BB 32-31 32-48 Number of Contacts 54 25 31 48 Contact Size 16 90 A 12 A B C J X H D E F F H A i h R b j k q r p s B c T d f n c U g Z d V E D u t Y a e w H N U I O V F L S X B A C B K R A D E J P W b G 16 M T S m C v Inst. 16 P a Z Y W N M L K v AA CC 32-25 A g p n z 32-22 A X f u t y Insert Arrangement Service Rating P W d m k x H V b r w F N M j i 7 8 T a Z 6 21 29 Y 5 28 S B E L K R 4 19 31 30 23 6 7 27 24 11 5 8 3 18 13 4 18 A C D 2 17 14 15 16 17 9 AE 16 15 3 24 20 AC 1 2 14 25 10 v y 23 19 r 1 D E C G F H G 100 Rotation Insert Arrangement32-5232-5332-56 32-57 Service Rating D Number of Contacts t, u = E; Bal = Inst. A ** 26 Contact Size 537 0 12 W V D A C B U Number of Contacts Contact Size n Y T i P d g h N f L M E c t K J P F H E N a X D M J T U V W C E A S Z Y 12 H F D b s v C a U j R B Z w 62 16 12 for #10 wire A q p k T R Service Rating X m S Insert Arrangement 246 12 16 K I 0 (Coax) RG-71/U A B G H L M P O B K D F J N R S T U C W X V L 32-5832-5932-60 32-62 - A A 4 40 2 15 8 2 1 ** 2 16 2 4 (Coax) RG-161/U 16 8 (Coax) RG-161/U 16 8 (Coax) 4 8 12 16 8 (Coax) or RG-179/URG-124/U RG-124/U16 CONTACT LEGEND 44 16 12 8 4 0 AC Series/MS contact arrangements front face of pin insert or rear face of socket insert illustrated F X b g m s AB D G K N S A C L O T Y c w x z AD P R e q y AA AG A J V u AF Insert Arrangement M j p t E Z d h n U B H W a F r v D C f k G AC E H K L J N M 17 16 15 P 35 32 13 54 39 40 29 30 11 3 28 25 6 7 6 2 7 8 3 5 9 10 9 5 26 27 1 8 4 24 4 32-7332-75 Inst. A Number of Contacts 38 46 41 12 32-6432-68 Service Rating 45 42 31 2 23 37 44 43 33 14 1 22 36 34 R Q AE 18 21 20 19 B A 12 4 8, 9 = D 46 2 7 Contact Size 16 16 4 (Coax) RG-58 C/U 16 12 8 (Coax) RG-180 B/U 1 2 4 3 6 5 8 9 13 11 14 15 17 12 E F 16 D G C H K L b M m P N X g s 19 Contact Size 41 12 D I A B E F J O K C G L P R S U V W N E C D Insert Arrangement36-136-3 Service Rating D D 418 1216 33 012 w h t P U Y E Z d j p u x z AA AH AF M V e q y J R a k v W f r AC AE AG 16 A A D C B B C 36-4 36-5 3 4 A = D; B, C = A A 0 CONTACT LEGEND 45 n H L A B T c O B D 55 H M T G 32-AF 164 A F K AD 124 48 A C AB R Q B S E J N F A D A Number of Contacts Contact Size B 32-7632-7932-82 Service Rating Number of Contacts A C 19 18 A 7 10 Insert Arrangement D 0 16 12 8 4 0 AC Series/MS contact arrangements front face of pin insert or rear face of socket insert illustrated A A C F B O E C H K Z h d j n V f g p v X b f m m s U D E J V e f P W b A H K R T B F L X c y z I O Y r t w d a e j h p u a R V Z d k n v x y z c g s P Y T L M U Z H K M S C E F J O S W D G I N T c k w x D X b t u r N S W a e J M R A B E G I L P U Y B D F C G N Insert Arrangement36-636-736-836-9 Service RatingAAAA Number of Contacts 24 Contact Size 740 0 4 A C H O V J P W d E Q e R f a h r V k z L Y u T a g h q r n t S R L D M G E h j r q v w U c b A T d c P k b a M L U m k s G x F D E z A N, P, Q = E; Bal. = A 16 1216 h g Y J 2 15 C V O D Y E W X F A C H K I L P U V d Z h j n e u R a t w B E G J M N S W X b f v g k T c p m s y x H D F r G D 5 B C z 100 Rotation of 36-7 36-15 36-16 Insert Arrangement36-14 5 A Q H 100 f Z K F S J B e j N L R K 48 Q N T N M N a 16 110 Rotation of 36-10 36-1236-13 B C g p 16 K S 14 812 P 110 G M Z y A P R u z F L Y f m s Q Number of Contacts X e x A Service Rating A Q W d K 48 J H P V k j J 100 Rotation of 36-10 36-11 16 I O c E 214 4 B D H U b w v C N S Z p n G M R y 48 Contact Size K f e A F E Q X t A Number of Contacts W m x Insert Arrangement 36-10 Service Rating J 1 1216 B D P d s w y O c b C H U j q v 100 N T Z g u M S p A G L Y n t F K X m B D 146 1216 6 M = D; Bal. = A 35 7 40 CONTACT LEGEND 46 16 12 8 4 0 AC Series/MS contact arrangements front face of pin insert or rear face of socket insert illustrated A C O H K U Y Z d h j n w r V A I O E f m W b p s T z C E V W b a h N U Z e d M T Y G L S G F K R X F L X c B K R J P B D H A H Y e C D J P y x M U Z d c g k v S 100 a T X b f t u N S W a e 110 J M R V E G I L P B D F c j f k g m N 110 Rotation 100 Rotation of 36-7 of 36-9 Insert Arrangement36-1736-18 36-20 Service RatingAA A Number of Contacts 7 40 Contact Size 1 1216 2 14 14 4 A B A E L T j D M V k u AE X b A r V j U T p P E D E d g h R N R AF P F g M N L H f J K 831 M 816 A B C F n q i S B t p h S E n q i T 16 m s k W U AC D AA c Y x w AB j C d t r V r m s 52 04 a v q B c k W i A 36-5236-54 22 Z h p AA Z Y g X b Y AH AD Service RatingD Contact Size S X n z Insert Arrangement36-51 Number of Contacts R f m y B W d t s C P 30 12 16 a Z K J N c b H 2 8 C D F U a 2 812 16 L M N V W X c H f L d m u J f n v R Y g q p w S T U Z a b h i r x y AE z j s AA O Z t AB h d j n V t r AF S W a u J M R e E G I L P U Y B D F H K k AH AD A C K J P AC K C D H F f AJ T c b g k m p v s w x N X y z Insert Arrangement36-5536-5936-60 Service RatingAA** Number of Contacts Contact Size 31 16 8 50 8 for #6 wire 16 3 CONTACT LEGEND 47 40 12 for #10 wire 16 16 12 8 7 12 for #10 wire 4 0 AC Series/MS contact arrangements front face of pin insert or rear face of socket insert illustrated A A B A D B E D B L M N V W X c d u v Y w Insert Arrangement 36-64 Number of Contacts 4 Service Rating 50 B C G 71 80 22 31 9 18 27 36 14 23 32 40 10 19 28 37 43 46 3 7 76 84 63 72 81 86 48 53 59 68 77 51 56 64 73 49 54 60 69 78 31 52 57 65 74 82 87 91 29 61 70 79 85 28 66 27 30 25 75 33 26 36 47 11 15 23 20 24 29 33 41 45 38 44 25 34 42 21 30 39 G 47 Insert Arrangement 36-76 Number of Contacts 47 43 13 44 15 20 18 11 12 14 16 17 16 for #14 wire 10 9 8 35 10 A B E 8 39 48 17 26 9 36-75 A F 12 45 7 38 40 42 21 5 6 19 A 16 41 4 37 35 46 22 168 (Coax) RG-187/U 8 3 34 48 24 83 2 32 89 90 2 5 AF 3 50 43 1 4 (Coax) RG-62B/U 13 Contact Size 67 88 7 6 Service Rating 58 55 - 4 AA 12 16 36-7336-74 1 z t AB AJ 4 D Contact Size k s AH AD 0 (Coax) RG-59/U, RG-62/U or RG-71/U 62 Number of Contacts j AE 1 F Service Rating b i y U - A A Insert Arrangement a 36-6536-71 0 (Coax) RG-11/U, RG-12/U or RG-13/U E T Z r x C - Contact Size S h q p AC C R g n K J P f m C D H F 1 14 C 3 12 13 7 D 2 11 6 4 5 36-7736-78 A D A 7 16 2 12 4 16 8 CONTACT LEGEND 48 16 12 8 4 0 AC Series/MS contact arrangements front face of pin insert or rear face of socket insert illustrated 1 2 1 3 4 6 7 8 11 12 13 16 17 5 2 3 9 10 6 7 8 14 15 11 12 13 18 19 16 A 4 17 5 F 9 10 14 15 18 B E 19 D 20 20 Insert Arrangement 36-79 36-80 36-83 Number of Contacts 20 20 7 Service Rating A Contact Size A 12 c P N j b Contact Size 16 for #12 wire x N v L t Service Rating Number of Contacts Contact Size C D s W K B c Z b a U V J r 1 S G H q p D g C D T E h j H M m V Z c A K P U L R W a S N b d B X C G e 36-AF40-1 40-5 AD 48 A 6 24 16 5 1216 CONTACT LEGEND 49 3 8 12 16 G J O 3 3 C F I Y 4 B E N T k F n 3 4/0 f R Y X M u A Q P O e 6 36-9736-99 A d z y 11 5 35 w Insert Arrangement 4 36-85 M = D; Bal. = A 12 7 G Service Rating Number of Contacts 9 3 E F X H J D W Y Z 8 2 10 g K Insert Arrangement V f h a 1 C e m 4 (Coax) RG-58/U B U k M L A T d - 12 for #10 wire S R Q C G 0 16 12 8 4 0 2/0 4/0 AC Series/MS contact arrangements front face of pin insert or rear face of socket insert illustrated A C G M U b O V W c d j F E I J K P Q R H N B D X f l m k r p q t u H K N R P 16 Q 4 5 30 28 U T 22 b Z 6 27 23 14 X W c Y s 3 21 29 15 S V 2 20 17 O o 1 19 18 L M i E D G I a h n C J T Z g e F S Y A B L 24 26 13 7 8 25 a 12 11 9 10 Insert Arrangement 40-940-1040-30 Service RatingAAA Number of Contacts 1 22 24 Contact Size 4 8 12 16 16 15 14 13 27 26 12 1 17 28 33 30 35 32 25 3 4 19 20 31 5 21 11 6 10 24 22 23 40 20 38 17 37 45 50 15 35 14 34 13 u AD AP v AE AR AZ BA BJ 9 AH AF AS AT BB BK AJ BC BL BS BT BE BN BU 40-53 40-56 Number of Contacts 35 60 85 Contact Size A 12 8 16 33 50 10 18 26 34 42 2 4 9 17 25 4 1 3 27 35 43 51 19 44 6 7 12 20 28 36 52 11 13 21 29 37 45 14 31 47 54 Number of Contacts Contact Size 20 32 19 41 49 55 18 56 17 59 22 40 39 38 37 16 58 3 Service Rating 21 24 40 48 57 Insert Arrangement 23 39 53 15 22 30 38 46 40-5740-61 1 0 8 3 50 41 53 52 51 36 15 1 24 25 42 43 54 55 60 59 58 50 49 35 34 14 13 2 26 44 56 57 48 33 12 3 27 45 46 47 32 11 4 28 29 30 31 10 5 6 7 8 9 A 55 60 12 16 CONTACT LEGEND 23 40-62 EA 4 BH BR 16 2 5 AN AY A 16 1 AM AX BF BP s AB BV 40-35 D AL AW BD BM r AA AK Insert Arrangement Service Rating z AV g q y AU f p x W d n w V c m M U b k L T a j 10 11 12 AC 8 31 32 33 i t 7 30 47 48 49 6 46 57 58 h K S Z D J R Y C H P X 5 29 56 59 36 16 7 28 B F N 4 27 44 60 51 A E 3 26 55 52 18 8 9 54 12 4 2 43 53 39 19 1 25 42 41 21 29 1 8 16 24 23 22 2 18 29 34 9 16 4 16 16 12 8 4 0 AC Series/MS contact arrangements front face of pin insert or rear face of socket insert illustrated 21 41 40 20 19 18 39 38 17 16 54 36 60 59 51 37 42 53 52 25 2 26 43 44 55 61 14 Insert Arrangement 7 q b V k 4 X a 2 E Z Y 3 F J H A Number of Contacts 61 Contact Size 40-66 - 3 16 for #14 wire A - 20 13 12 16 P F H K 16 A B D H 41 40 E 19 J 18 39 L 36 15 Insert Arrangement40-72 39 47 60 21 61 43 44 55 61 49 33 34 13 12 11 28 5 29 44 52 57 61 16 31 32 2 5 6 30 7 4 8 3 9 10 4 (Coax) RG-9B/U 1 16 CONTACT LEGEND 51 43 51 1 40-74 A 61 27 35 6 4 46 48 42 8 3 47 34 50 18 26 A 27 45 56 58 35 14 2 26 33 56 60 17 25 41 49 40-70 57 50 32 55 59 10 16 24 40-68 1 25 15 40 48 54 9 23 31 58 40-73 Service Rating A 1 10 54 59 51 37 16 16 38 46 F 24 42 53 52 38 17 M 22 A 23 22 20 K 14 30 5 8 4 (Coax) RG-59/U 21 F 21 G 1 10 C 37 45 13 29 4 7 53 H L M 36 E T U 12 20 28 J Service Rating A Contact Size 19 D S Insert Arrangement 40-67 Number of Contacts 11 C V 3 6 X J K 2 R L E D 1 B W C 0 (Coax) RG-63B/U A N B 4 8 (Coax) RG-124/U M Contact Size RG-9B/U D W 40-63 40-64 Service Rating Number of Contacts C U j m K 9 T i p c 8 1 B S n d 10 11 12 g L A R h f 6 30 31 32 M 5 29 47 33 34 13 28 46 48 49 4 27 57 P N 3 45 56 58 50 35 15 1 24 23 22 A 1 12 4 4 (Coax) RG-62/U 16 12 8 0 (Coax) 4 0 AC Series/MS contact arrangements front face of pin insert or rear face of socket insert illustrated 1 A 1 B 5 5 12 4 20 2 C E D F H 13 21 29 37 J 22 38 K M Contact Size 1 5 12 20 6 13 21 29 37 46 14 22 30 38 2 8 15 23 31 39 47 3 7 32 48 54 17 33 49 42 56 18 35 43 51 57 61 28 36 44 52 53 38 17 58 37 36 16 62 51 15 14 50 13 32 4 2 9 10 11 12 7 8 31 33 34 6 30 47 48 49 35 5 29 46 57 58 3 Insert Arrangement 40-82 40-85 40-86 Number of Contacts 62 60 4 Service Rating A Contact Size A 16 - 16 for #14 wire 6 0 (Coax) RG-115A/U A 1 7 2 G 34 F 4 Insert Arrangement Service Rating Number of Contacts Contact Size 7 17 12 30 29 26 13 14 28 24 25 27 40-AG A 4 4 38 80 12 CONTACT LEGEND 52 11 4 15 DA 4 23 16 40-8740-AD 22 3 1 5 31 7 10 2 6 32 3 21 9 18 33 D 20 8 19 35 C E 38 37 B H 36 5 58 62 4 28 45 56 59 45 53 1 3 27 44 55 60 52 18 54 53 39 19 45 40 20 2 26 43 57 44 52 16 for #14 wire 1 25 42 41 21 19 27 24 23 22 11 26 34 50 60 10 25 41 55 59 16 24 40 4 43 28 36 62 16 4 9 35 51 61 19 27 A 110 12 0 42 56 60 26 34 50 11 18 40-81 Service RatingEA 14 25 41 55 10 17 33 49 Insert Arrangement40-7540-80 Number of Contacts 24 40 59 L 9 16 32 48 54 3 15 23 39 4 8 31 47 3 7 14 30 46 2 6 16 12 8 4 0 AC Series/MS contact arrangements front face of pin insert or rear face of socket insert illustrated B N A C M B D A 25 H K F J Insert Arrangement E 2 1 5 16 2 Contact Size 7 4/0 17 16 15 24 14 34 23 13 12 12 20 22 26 27 28 29 30 31 32 33 35 36 37 38 40 41 42 43 22 P 19 3 N F 20 A D 5 6 C M H C L J K 8 Insert Arrangement40-AT40-AU 40-AV Service RatingAA 24 12 18 16 B G A 4 7 9 1612 B 39 21 11 15 25 0 E 2 18 3 4 1 25 10 3 1 3 8 4 CONTACT LEGEND 53 10 8 16 D 1 3 16 2/0 12 8 4 0 2/0 38 40 13 21 14 23 G 39 12 4 24 15 11 3 6 17 37 10 EInst. A Number of Contacts Contact Size 7 18 36 9 40-AP40-AR 40-AS Service Rating Number of Contacts 35 8 27 26 33 34 32 19 29 28 L 31 30 4/0 Thermocouple AC Series - Thermocouple contact availability availability contact A complete line of cylindrical connectors containing containing therthermocouple mocouple insert arrangements arrangements is available. available. The The contact contact layout layout for for aa particular particular arrangement arrangement will will be be found found in in either either the the MS/Standard MS/Standard contact contact arrangement arrangement section, section, pages pages 26-37, 32-53, or the Special contact arrangement arrangement section, section, pages pages 38-48. 54-58. All thermocouple contact layouts layouts may may contain contain either either iron, alumel, alumel, chromel, constantan, constantan, standard standard (cop(copper) or brass (dummy) (dummy) contacts. contacts. See See the the thermocouple thermocouple tabulations tabulations on on the the following following pages. pages. The following abbreviations are used in the contact material column in the charts that follow. Also, thermocouple contacts are color coded as shown. (This identification is made by means of small dots of stain on the solder well end of the contact). Abbreviation Material Color Code Ir. Iron Black Con. Constantan Yellow Cu. Copper Alloy N/A Ch. Chromel White Al. Alumel Green Dummy Brass N/A WIRE WELL DATA Contact Size Well Inside Dia. +.004 -.002 Well Depth +.031 -.000 Solder Well Barrel Outside Dia. 12 .125 .250 .166 .003 16 .094 .188 .125 -.004 +.002 RECOMMENDED WIRE I Chromel - Alumel Use wire in accordance with MIL-W-5848 II Iron - Constantan Use wire in accordance with MIL-W-5845 54 49 Thermocouple AC Series - Thermocouple contact arrangements arrangements contact Shell Size and Arrg. Similar to MS Arrg. Total Contacts Contact Size 10SL-51 10SL-52 10SL-53 10SL-54 10SL-55 10SL-56 10SL-57 10SL-58 10SL-59 10SL-60 10SL-61 10SL-62 10SL-63 10SL-64 10SL-4 10SL-4 10SL-4 10SL-3 10SL-3 10SL-4 10SL-4 10SL-3 10SL-4 10SL-4 10SL-4 10SL-3 10SL-3 10SL-3 2 2 2 3 3 2 2 3 2 2 2 3 3 3 2 2 2 3 3 2 2 3 2 2 2 3 3 3 Pin Insert Rotation CW 45 45 45 None None None None None None None None None None None 12S-51 12S-54 12S-55 12S-56 12S-57 12S-58 12S-59 12S-60 12S-61 12S-62 12S-3 12S-3 12S-3 12S-3 12S-3 12S-3 12S-3 12S-3 12S-3 12S-3 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 315 315 45 None 60 120 None None None None A = Ch.; B = Al. A = Ir.; B = Con. A = Cu.; B = Con. A = Al.; B = Ch. A = Ch.; B = Al. A = Ir.; B = Con. A = Ir.; B = Con. A = Cu.; B = Con. A = Ch.; B = Con. A = Ch.; B = Al. 14S-51 14S-52 14S-53 14S-54 14S-55 14S-56 14S-57 14S-58 14S-59 14S-60 14S-61 14S-63 14S-64 14S-65 14S-67 14S-68 14S-69 14S-70 14S-71 14S-72 14S-73 14S-9 14S-2 14S-9 14S-6 14S-2 14S-2 14S-2 14S-7 14S-9 14S-9 14S-6 14S-6 14S-2 14S-6 14S-6 14S-2 14S-7 14S-2 14S-2 14S-9 14S-2 2 4 2 6 4 4 4 3 2 2 6 6 4 6 6 4 3 4 4 2 4 2 4 2 6 4 4 4 3 2 2 6 6 4 6 6 4 3 4 4 2 4 90 45 90 45 45 45 45 45 90 None 45 None None None None 45 None None None None None A = Al.; B = Ch. A, B = Cu.; C = Al.; D = Ch. A = Ir.; B = Con. A, C, E = Ir.; B, D, F = Con. A, C = Ir.; B, D = Con. A = Ir.; B = Con.; C, D = Cu. A, C = Al.; B, D = Ch. A = Al.; B = Ch.; C = Cu. A = Cu.; B = Con. A = Al.; B = Ch. A = Al.; B = Ch.; C = Ir.; D = Con.; E, F = Cu. A, C = Al.; B, D = Ch.; E = Ir.; F = Con. A, C = Con.; B, D = Cu. A, C., E = Cu.; B, D, F = Con. A = Al.; B = Ch.; Balance = Cu. A = Ch.; B = Con.; C, D = Cu. A = Con.; B = Ch.; C = Cu. A, D = Ch.; B, C = Al. A, B, D = Cu.; C = Con. A = Con.; B = Cu. A, B = Cu.; C = Al.; D = Ch. 12 16 Contact Material A = Ir.; B = Con. A = Cu.; B = Con. A = Al.; B = Ch. A = Ir.; B = Con.; C = Cu. A = Al.; B = Ch.; C = Cu. A = Al.; B = Ch. A = Ch.; B = Con. A = Ch.; B = Al.; C = Cu. A = Ch.; B = Al. A = Ir.; B = Con. A = Cu.; B = Con. A = Cu.; B = Al.; C = Ir. A, C = Con.; B = Ch. A, C = Ch.; B = Al. 55 50 Thermocouple AC Series - Thermocouple contact arrangements arrangements contact Similar to MS Arrg. Total Contacts 14S-74 14S-75 14S-76 14S-77 14S-78 14S-2 14S-2 14S-2 14S-2 14S-9 4 4 4 4 2 4 4 4 4 2 Pin Insert Rotation CW None None None None None 16S-52 16S-54 16S-55 16S-4 16S-1 16S-1 2 7 7 2 7 7 None None None A = Ch.; B = Al. A = Al.; B = Ch.; Balance = Cu. A = Con.; Balance = Cu. 16-52 16-53 16-55 16-56 16-57 16-58 16-60 16-62 16-11 16-9 16-10 16-13 16-10 16-10 16-13 16-11 2 4 3 2 3 3 2 2 90 70 45 90 None None None None A = Al.; B = Ch. A = Al.; C = Ch.; B, D = Cu. A = Al.; B = Ch.; C = Cu. A = Con.; B = Cu. A = Al.; B = Cu.; C = Ch. A = Con.; B, C = Cu. A = Al.; B = Ch. A = Con.; B = Cu. 18-51 18-52 18-53 18-54 18-56 18-57 18-59 18-60 18-61 18-62 18-63 18-65 18-66 18-67 18-68 18-69 18-70 18-71 18-72 18-73 18-74 18-12 18-11 18-12 18-15 18-1 18-12 18-12 18-11 18-12 18-12 18-15 18-12 18-1 18-12 18-11 18-1 18-11 18-15 18-15 18-9 18-12 6 5 6 4 10 6 6 5 6 6 4 6 10 6 5 10 5 4 4 7 6 None None None None 45 45 45 45 None None None None None None None None None None None None None A = Ir.; B, E = Con.; D = Cu.; C, F = Dummy A = Ir.; B = Con.; C = Ch.; D = Al.; E = Dummy A, D = Ir.; B, E = Con.; C, F = Dummy A, C = Al.; B, D = Ch. A, C, E, G, I = Ir.; B, D, F, H, J = Con. A, C, E = Al.; B, D, F = Ch. A, C = Ir.; B, E, F = Con.; D = Cu. A, D = Al.; B, C, = Ch.; E = Cu. A, C = Ir.; B, D = Con.; E = Ch.; F = Al. A, B, C = Ir.; D, E, F = Con. A, C = Con.; B, D = Cu. A = Ir.; B = Con.; Balance = Cu. A, C, E, G, I = Cu.; B, D, F, H, J = Con. A, C, E = Cu.; B, D, F = Con. A, D = Al.; B, C = Ch.; E = Cu. A = Al.; B = Ch.; Balance = Cu. A = Ir.; B = Con.; C = Ch.; D = Al.; E = Cu. A = Con.; Balance = Cu. D = Con.; Balance = Cu. A = Al.; D = Ch.; Balance = Cu. A = Ch.; B = Al.; D = Ir.; E = Cu.; C, F = Con. 20-52 20-56 20-60 20-61 20-62 20-64 20-4 20-7 20-7 20-29 20-15 20-27 4 8 8 17 7 14 315 45 45 45 80 None A = Ir.; B = Con.; C = Ch.; D = Al. A, B, G, H = Ir.; C, D, E, F = Con. D = Ch.; E = Al.; Balance = Cu. A, B, M = Cu.; Balance = Con. A, C, E = Al.; B, D, F = Ch.; G = Cu. A = Al.; C = Ch.; Balance = Cu. Shell Size and Arrg. Contact Size 12 2 2 3 2 3 3 2 2 5 4 5 4 5 5 4 4 2 4 7 16 2 6 6 10 6 6 6 6 6 10 6 10 5 6 8 8 17 14 Contact Material A, B = Ch.; C, D = Al. A, B = Cu.; C, D = Con. A, C = Al.; B, D = Ch. A, D = Al.; B, C = Ch. A = Ch.; B = Al. 56 51 Thermocouple AC Series - Thermocouple contact arrangements contact arrangements Shell Size and Arrg. Similar to MS Arrg. Total Contacts 20-65 20-67 20-68 20-69 20-70 20-71 20-74 20-75 20-77 20-80 20-81 20-82 20-27 20-16 20-7 20-27 20-29 20-29 20-29 20-15 20-16 20-27 20-27 20-29 14 9 8 14 17 17 17 7 9 14 14 17 22-36 22-57 22-60 22-62 22-68 22-69 22-71 22-72 22-73 22-74 22-75 22-76 22-77 22-78 22-79 22-23 22-14 22-14 22-23 22-19 22-19 22-14 22-5 22-5 22-23 22-23 22-19 22-14 22-10 8 19 19 8 14 14 19 6 6 8 8 21 14 19 4 24-56 24-57 24-62 24-20 24-28 24-28 11 24 24 24-63 24-28 24-64 24-68 24-81 Contact Size 12 2 7 2 8 16 14 7 8 14 17 17 17 7 14 14 17 Pin Insert Rotation CW None None None None None None None None None None None None Contact Material A, B, C, D, E, F, G = Ir.; H, I, J, K, L, M, N = Con. H = Al.; I = Ch.; Balance = Cu. A, B, G, H = Con.; C, D, E, F = Cu. A, B, C, D, E, F, G = Cu.; H, I, J, K, L, M, N = Con. A, C, E, G, J, L, N, R, T = Ir.; B, D, F, H, K, M, P, S = Con. S = Al.; R = Ch.; Balance = Cu. A, C, E, G, J, L, N, R = Ir.; B, D, F, H, K, M, P, S = Con.; T = Cu. G = Al.; Balance = Ch. A = Con.; Balance = Std. A, C, E, G, I, K, M = Cu.; B, D, F, H, J, L, N = Con. A, C, E, G, I, K, M = Ch.; B, D, F, H, J, L, N = Al. A, C, E, G, J, L, N, R = Al.; B, D, F, H, K, M, P, S = Ch.; T = Cu. 21 14 19 4 347 45 45 60 45 45 None None None None None None None None None A, C, E, G = Ir.; B, D, F, H = Con. A, C, E, G, J, L, N, R = Ir.; B, D, F, H, K, M, P, S = Con.; T, U, V = Cu. U = Al.; N = Ch.; Balance = Cu. A, B, F, G = Al.; C, D, E, H = Ch. A, C, E, G, J, L, M = Ir.; B, D, F, H, K, P, N = Con. A, C, E, G, J, L, M = Cu.; B, D, F, H, K, P, N = Con. V = Al.; U = Ch.; Balance = Cu. B = Al.; E = Ch.; Balance = Cu. E = Al.; B = Ch.; Balance = Cu. A, C, E, G = Ir.; B, D, F, H = Con. A = Al.; B, D, G, H = Cu.; C = Ch.; E = Ir.; F = Con. W = Con.; Balance = Cu. B, D, F, H, J, K, M, P = Cu.; A, E, L = Ir.; C, G, N = Con. A, C, E, G, H, K, M, P, R, T = Con.; Balance = Cu. A, C, = Con.; B, D = Cu. 9 24 24 45 45 None 24 24 None 24-5 24-28 24-7 16 24 16 16 24 14 None None None E = Al.; F = Ch.; Balance = Cu. A, C, J, V, Y, W, K, E, H, U, S, M = Ch.; Balance = Al. A, C, E, G = Ir.; B, D, F, H = Con.; R, T = Ch.; S, U = Al.; Balance = Cu. A, C, E, G, J, L, K, N, S, U, W, Y = Cu.; B, D, F, H, Q, R, M, P, T, V, X, Z = Con. A, B, C, D, E, F, G, H = Ir.; J, K, L, M, N, P, R, S = Con. D = Con.; Balance = Cu. A, C, E, G, I, K, M, N, P = Cu.; B, D, F, H, J, L, O = Con. 28-53 28-58 28-61 28-63 28-11 28-20 28-21 28-20 22 14 37 14 18 4 37 4 45 45 45 45 28-64 28-15 35 35 None 28-65 28-12 26 26 None 28-67 28-68 28-16 28-15 20 35 20 35 None 45 8 2 2 8 8 2 2 4 10 10 19 19 14 14 19 4 4 J, L = Al.; K, M = Ch.; Balance = Cu. A, C, E, G, K, M = Al.; B, D, F, H, L, N = Ch.; J, P = Cu. A, C, J, Z, m, r, n, a, K, F, H, X, k, h, T, M, N, d = Ir.; Balance = Con. A, C, E, G, J = Al.; B, D, F, H, P = Ch.; Balance = Cu. A, d = Al.; B, j = Ch.; C, D, E, F, G, N, P, R, S, H, J, K, L, M, W, X, Y, Z = Con.; Balance = Cu. A, C, E, G, J, L, N, R, T, V = Ir.; X, Z = Al.; B, D, F, H, K, M, P, S, U, W = Con.; Y, a = Ch.; b, d = Cu. U = Con.; Balance = Cu. T = Al.; U = Ch.; Balance = Cu. 57 52 AC Series - Thermocouple Thermocouple contact contact arrangements arrangements Shell Size and Arrg. Similar to MS Arrg. Total Contacts 28-69 28-70 28-77 28-11 28-11 28-11 22 22 22 Contact Size 12 16 4 18 4 18 4 18 28-81 28-21 37 37 None 32-51 32-55 32-8 32-8 30 30 6 6 24 24 90 125 M = Ch.; N = Al.; Balance = Cu. M, N = Ch.; O, P = Al.; Balance = Cu. 36-53 36-7 47 7 40 45 36-56 36-10 48 48 None 36-57 36-58 36-61 36-62 36-82 36-8 36-15 36-15 36-10 36-52* 47 35 35 48 52 46 35 35 48 52 None None None None None u, v, w = Al.; x, y, z = Ch.; Balance = Cu. A, C, E, G, L, J, H, P, R, T, V, X Z, b, d, f, h, k, q, n, m, u, w, y = Con.; Balance = Cu. W = Al.; f = Ch. Balance = Cu. H = Al.; G = Ch.; Balance = Cu. A, C, E, J, K, L, M, N, P, R, T, V, f, X, Y, h, j, c = Con.; Balance = Cu. A, C, E, = Al.; B, D, F = Ch.; Balance = Cu. v, g = Ir.; p, y, c = Con. x = Ch.; Balance = Cu. 40-58 40-56* 85 85 None 40-59 40-77 40-56* 40-53* 85 60 85 60 None None 40-78 40-53* 60 60 None A, C, E, H, K, M, P, S, U, W, Y, a, c, f, h, j, m, p, r, t, v, x, z, AB, AD, AF, AJ, AL, AN, AP, AS, AU, AW, AY, BA, BC, BE, BH, BK, BM, BP, BS, BU = Ir.; Balance = Con. B = Ch.; C = Con.; Balance = Cu. 55, 60 = Ir.; 57, 58, 59 = Con.; 56 = Ch.; Balance = Cu. 50, 51 = Ir.; 27, 28, 29, 31, 32, 34, 36, 37 = Con.; 25, 39, 40, 41 = Al.; 43, 44, 45, 46, 47, 48, 49, 52, 53, 54 = Ch.; Balance = Cu. 44-57 44-52 104 104 None A, C, E, G, J, L, etc. = Cu.; B, D, F, H, K, M, etc. = Con. * Amphenol arrangement 1 Pin Insert Rotation CW None None None Contact Material G = Al.; R = Ch.; Balance = Cu. A = Al.; B = Ch.; Balance = Cu. J = Con.; Balance = Cu. A, D, S, Z, n, s = Ir.; B, J, K, f, g, r = Con.; G, L, P, b, e, j = Al.; F, H, T, X, h, k = Ch.; Balance = Cu. 58 53 AC Series how to order To more easily illustrate ordering procedure, part number ACCL06AF18-1SX(025) is shown as follows: AC C L 06 AF 18-1 S X (025) 1 2 3 4 5 6 7 8 9 1. AC designates Amphenol Industrial Series Threaded Connectors 2. C S 3. L designates low smoke zero halogen inserts and grommets Omit for standard resilient inserts and grommets. 4. Shell Style 00 - Wall Mounting Receptacle 01 - Line Receptacle 02 - Box Mounting Receptacle 05 - Straight Plug 06 - Straight Plug with hardware 08 - 90 degree Plug 5. Class A or AF - General duty connector E or F - Environmental connector for a wire bundle PGA or PGR - Environmental connector for jacketed cable 6. Shell size and insert arrangement See insert availability on pages 25-27 7. Contact type P - Pin contacts S - Socket contacts R - RADSOK(R) crimp socket contacts (see page 31) 8. designates Crimp Contacts designates Solder Contacts Ask for Brochure SL-391 for Amphe-Power Connectors with RADSOK Technology. Alternate insert rotation "W", "X", "Y", "Z" designates that the insert is rotated in its shell from a normal position. No letter required for normal (no rotation) position. See page 28 for availability. 9. Variations RoHS Compliant (072) - Gray zinc nickel finish (023) - Electroless nickel finish (025) - Black zinc alloy finish (G96) - Black hard-coat anodize (B30) - Gold plated contacts (116) - Non-pre-tinned solder contacts (472) - Black zinc alloy finish and solder contacts less pre-filled cup (548) - Electroless nickel finish and solder contacts less pre-filled cup (724) - Gray zinc nickel finish and solder contacts less pre-filled cup 59 For further RoHS Compliant support, contact Amphenol Industrial Operations or call 1-866-315-8559. MS/Standard how to order SAE AS50151 (Solder Contacts) MS 1 3102 2 A 18 - 3 345 P 6 W 7 1.Connector Type MS designates Military Standard 2. Connector Style 3100 wall mounting receptacle 3101 cable connecting receptacle 3102 box mounting receptacle 3106 straight plug 3108 90 plug 3. Service Class A solid shell for general, non-environmental applications C solid shell for pressurized applications (MS3102 only) E environmental resisting F environmental resisting with strain relief R lightweight environmental resisting 4., 5. Shell size and insert arrangement - see tables, pages 25-27. 6. Contact Types P designates pin contact S designates socket contact 7. Insert Rotation "W", "X", "Y", or "Z" designate that insert is rotated in its shell from normal position. No letter required for normal (no rotation) position. 60 AC Series/MS - accessories 10-40450, 10-36675 sealing gaskets, 10-405996 sealing plugs, sealing ranges SEALING GASKETS C .031 .010 PLAIN A .020 .004 SHIELDING A This flat gasket is provided to give the maximum in con nector performance. Its special feature is in providing the maximum radio shielding under difficult conditions of high receiver sensitivity and low signal strength while retaining the sealing characteristics of the plain gasket. This gasket is for use with the flange mounting C D 4 HOLES B The Amphenol plain flat gasket of synthetic rubber mate rial is provided to take complete advantage of waterproof and pressure sealing features. It is for use with the flange mounted receptacle. This gasket is provided for applications where the major requirement is resistance to the injurious effects of extremely low temperature. Even at temperatures as low as -67F this gasket retains its resiliency and will seal a pressure differential of 30 psi. .031 .010 LOW TEMPERATURE Installation Dimensions Order Data MS Inches Millimeters Shell A B C D A B C D Plain Shielding Size .010 + .016 + .016 .010 .25 +.41 +.41 .25 - .000 - .000 - .00 - .00 8S .594 .500 .875 .172 15.09 12.70 22.22 4.37 10-40450-8 10-40450-8S 10S .719 .625 1.000 .172 18.26 15.88 25.40 4.37 10-40450-10 10-40450-10S 10SL .719 .625 1.000 .172 18.26 15.88 25.40 4.37 10-40450-10 10-40450-10S 12S .813 .750 1.094 .172 20.65 19.05 27.79 4.37 10-40450-12 10-40450-12S 12 .813 .750 1.094 .172 20.65 19.05 27.79 4.37 10-40450-12 10-40450-12S 14S .906 .875 1.188 .172 23.01 22.22 30.18 4.37 10-40450-14 10-40450-14S 14 .906 .875 1.188 .172 23.01 22.22 30.18 4.37 10-40450-14 10-40450-14S 16S .969 1.000 1.281 .172 24.61 25.40 32.54 4.37 10-40450-16 10-40450-16S 16 .969 1.000 1.281 .172 24.61 25.40 32.54 4.37 10-40450-16 10-40450-16S 18 1.063 1.125 1.375 .203 27.00 28.57 34.92 5.16 10-40450-18 10-40450-18S 20 1.156 1.250 1.500 .203 29.36 31.75 38.10 5.16 10-40450-20 10-40450-20S 22 1.250 1.375 1.625 .203 31.75 34.92 41.27 5.16 10-40450-22 10-40450-22S 24 1.375 1.500 1.750 .203 34.92 38.10 44.45 5.16 10-40450-24 10-40450-24S 28 1.563 1.750 2.000 .203 39.70 44.45 50.80 5.16 10-40450-28 10-40450-28S 32 1.750 2.000 2.250 .219 44.45 50.80 57.15 5.56 10-40450-32 10-40450-32S 36 1.938 2.188 2.500 .219 49.23 55.58 63.50 5.56 10-40450-36 10-40450-36S 40 2.188 2.438 2.750 .219 55.58 61.93 69.85 5.56 10-40450-40 10-40450-40S SEALING PLUG 10-405996-XX1 Sealing plugs are used to fill unused holes in multi-holed grommet configurations. B DIA C .135 +.030 -.025 Low Temperature Style 10-36675-8 10-36675-10 10-36675-10 10-36675-12 10-36675-12 10-36675-14 10-36675-14 10-36675-16 10-36675-16 10-36675-18 10-36675-20 10-36675-22 10-36675-24 10-36675-28 10-36675-32 10-36675-36 10-36675-40 Inches Millimeters Contact Wire Color A Dia B C A Dia. B C Order No. Size Size Code .010 .005 .010 0.2 0.1 0.2 10-405996-161 16 20-16 Blue .083 .133 .564** 2.1 3.4 14.3*** 10-405996-121 12 14-12 Yellow .121 .171 .564** 3.1 4.3 14.3*** 10-405996-081 8 10-8 White .185 .315 .470 4.7 8.0 11.9 10-405996-041 4 4-6 Blue .310 .415 .470 7.9 10.5 11.9 10-405996-001 0 0-2 Yellow .440 .605 1.000 11.2 15.4 25.4 A DIA GROMMET HOLE SEALING RANGE 45 All dimensions for reference only. 61 Hole Sealing Range Size Millimeters Inches 16 2.3 - 3.0 .090 - .118 12 3.2 - 4.5 .126 - .177 8 3.8 - 6.5 .150 - .256 4 7.1 - 9.3 .279 - .366 0 10.0 - 13.7 .394 - .539 ** .020 *** 0.5 mm MS/Standard AC Series/MSAccessories Accessories MS3057-A stylecable cableclamp, clamp, MS3057-A style MS3420 sleeve MS3420 sleeve The MS3057-A style cable clamp was designed for use with jacketed cable or wires protected by tubing. Both clamping halves float for maximum strain relief. For unjacketed cable or wires, use corresponding MS3420 sleeve. To order clamp with sleeve, add -1 to the 97 - number. Two telescoping sleeves are furnished with shells sizes 24 and larger. V Thread B C A Shell Size Amphenol Number A .031 B Max. C Dia. Min. V Thread 10SL, 12S 14,14S 16,16S 18 20, 22 24, 28 32 36 97-3057-1004 97-3057-1007 97-3057-1008 97-3057-1010 97-3057-1012 97-3057-1016 97-3057-1020 97-3057-1024 .795 .850 .920 .920 .927 1.015 1.095 1.156 .842 .995 1.120 1.216 1.403 1.683 2.050 2.245 .3125 .4375 .5625 .6250 .7500 .9375 1.2500 1.3750 .6250-24 .7500-20 .8750-20 1.0000-20 1.1875-18 1.4375-18 1.7500-18 2.0000-18 Sleeve MS Part No. 3420-3 3420-4 3420-6 3420-8 3420-10 3420-12 3420-16 3420-20 3420-24 Amphenol Number 9779-513-3 9779-513-4 9779-513-6 9779-513-8 9779-513-10 9779-513-12 9779-513-16 9779-513-20 9779-513-24 A .005 B .005 C .010 D .031 .130 .220 .312 .437 .562 .625 .750 .937 1.250 .210 .302 .427 .552 .615 .740 .927 1.240 1.365 .374 .500 .614 .739 .889 1.084 1.309 1.592 1.842 2.875 2.750 2.625 2.500 2.375 2.250 2.125 2.000 1.875 62 55 A D C B MS/Standard AC Series/MSAccessories Accessories protection caps - plug PLUG PROTECTION CAP 10-329391-XX* L Assembly Number B 10-329391-10 10-329391-11 10-329391-12 10-329391-14 10-329391-16 10-329391-18 10-329391-20 10-329391-22 10-329391-24 10-329391-28 10-329391-32 10-329391-36 10-329391-40 10-329391-44 A THD C PLUG PROTECTION CAP 10-229125-XX* Assembly Number L 10-229125-10 10-229125-12 10-229125-14 10-229125-16 10-229125-18 10-229125-20 10-229125-22 10-229125-24 10-229125-28 10-229125-32 10-229125-36 10-229125-40 A THD D C PLUG PROTECTION CAP MS25042-XXDA* MS Number L MS25042-8DA MS25042-10DA MS25042-12DA MS25042-14DA MS25042-16DA MS25042-18DA MS25042-20DA MS25042-22DA MS25042-24DA MS25042-28DA MS25042-32DA MS25042-36DA MS25042-40DA A THD C A Thread Class 2A B Dia. +.010 -.000 C Approx. 3.5 3.5 3.5 3.5 3.5 3.5 4.0 4.0 4.5 4.5 5.0 5.0 5.0 6.0 1.312 1.312 1.500 1.500 1.500 1.500 1.500 1.500 1.500 1.500 1.500 1.500 1.500 1.500 A Thread Class 2A C Approx. D Ref. L Max. .625-24UNEF .625-24UNEF .750-20UNEF .875-20UNEF 1.000-20UNEF 1.125-18UNEF 1.250-18UNEF 1.375-18UNEF 1.500-18UNEF 1.750-18UNS 2.000-18UNS 2.250-16UN 2.500-16UN 2.750-16UN .625-24NEF .750-20UNEF .875-20UNEF 1.000-20UNEF 1.125-18NEF 1.250-18NEF 1.375-18NEF 1.500-18NEF 1.750-18NS 2.000-18NS 2.250-16UN 2.500-16UN A Thread Class 2A .500-28UNEF .625-24UNEF .750-20UNEF .875-20UNEF 1.000-20UNEF 1.125-18UNEF 1.250-18UNEF 1.375-18UNEF 1.500-18UNEF 1.750-18UNS 2.000-18UNS 2.250-16UN 2.500-16UN .516 .641 .641 .766 .891 1.016 1.141 1.266 1.391 1.641 1.891 2.078 2.328 2.641 3.0 3.5 3.5 3.5 3.5 3.5 3.5 4.5 4.5 5.0 5.0 5.0 B Dia. +.010 -.005 .156 .156 .156 .156 .156 .156 .187 .187 .187 .187 .218 .218 .218 L Max. .140 .140 .140 .140 .140 .193 .193 .193 .193 .193 .193 .193 1.233 1.421 1.421 1.421 1.421 1.421 1.421 1.421 1.421 1.421 1.421 1.421 C Approx. L Max. 4.00 4.00 4.50 4.50 4.50 4.50 5.00 5.00 5.50 7.75 7.75 7.75 7.75 .969 .969 1.156 1.156 1.156 1.156 1.156 1.156 1.156 1.156 1.156 1.156 1.156 * Protective caps are illustrated with sash chains and are available with beaded chains or without chains. Optional terminations are also available. Consult Amphenol, Sidney, NY when ordering. D 63 MS/Standard AC Series/MSAccessories Accessories protection caps--receptacle receptacle protection caps RECEPTACLE PROTECTION CAP 10-329392-XX* L A THD Assembly Number B D C RECEPTACLE PROTECTION CAP 10-422905-XXX* L A THD B D C RECEPTACLE PROTECTION CAP MS25043-XXDA* L D C B Dia. Min. C Approx. D Dia. Max. 3.5 3.5 3.5 3.5 3.5 4.0 4.0 4.5 4.5 5.0 5.0 5.0 6.0 .875 1.000 1.125 1.250 1.375 1.500 1.625 1.750 2.000 2.250 2.500 2.656 2.938 .793 .793 .793 .793 1.024 1.024 1.024 1.024 1.024 1.024 1.024 1.024 1.024 D Dia. Max. L Max. L Max. 10-329392-10 10-329392-12 10-329392-14 10-329392-16 10-329392-18 10-329392-20 10-329392-22 10-329392-24 10-329392-28 10-329392-32 10-329392-36 10-329392-40 10-329392-44 .625-24UNEF .750-20UNEF .875-20UNEF 1.000-20UNEF 1.125-18UNEF 1.250-18UNEF 1.375-18UNEF 1.500-18UNEF 1.750-18UNS 2.000-18UNS 2.250-16UN 2.500-16UN 2.750-16UN .516 .641 .766 .891 1.016 1.141 1.266 1.391 1.641 1.891 2.078 2.328 2.641 Assembly Number A Thread Class 2B B Ref. C Approx. 3.0 3.5 3.5 3.5 3.5 4.0 4.0 4.5 4.5 5.0 5.0 5.0 .875 1.000 1.125 1.250 1.375 1.500 1.625 1.750 2.000 2.250 2.500 2.656 .812 .812 .812 .812 1.031 1.031 1.031 1.031 1.031 1.031 1.031 1.031 B +.010 -.005 C Approx. D Dia. Max. L Max. 10-422905-103 10-422905-123 10-422905-143 10-422905-163 10-422905-183 10-422905-203 10-422905-223 10-422905-243 10-422905-283 10-422905-323 10-422905-363 10-422905-403 .625-24UNEF .750-20UNEF .875-20UNEF 1.000-20UNEF 1.125-18UNEF 1.250-18UNEF 1.375-18UNEF 1.500-18UNEF 1.750-18UNS 2.000-18UNS 2.250-16UN 2.500-16UN MS Number A Thread Class 2B MS25043-8DA MS25043-10DA MS25043-12DA MS25043-14DA MS25043-16DA MS25043-18DA MS25043-20DA MS25043-22DA MS25043-24DA MS25043-28DA MS25043-32DA MS25043-36DA MS25043-40DA A THD A Thread Class 2B .500-28UNEF .625-24UNEF .750-20UNEF .875-20UNEF 1.000-20UNEF 1.125-18UNEF 1.250-18UNEF 1.375-18UNEF 1.500-18UNEF 1.750-18UNS 2.000-18UNS 2.250-16UN 2.500-16UN .140 .140 .140 .140 .193 .193 .193 .193 .193 .193 .193 .193 .140 .140 .140 .140 .140 .140 .140 .140 .171 .171 .187 .187 .187 4.00 4.00 4.50 4.50 4.50 4.50 5.00 5.00 5.50 7.75 7.75 7.75 7.75 .688 .815 1.000 1.125 1.188 1.344 1.469 1.594 1.719 1.969 2.219 2.469 2.719 .750 .750 .750 .750 .750 .750 .750 .750 .750 .812 .812 .812 .812 * Protective caps are illustrated with sash chains and are available with beaded chains or without chains. Optional terminations are also available. Consult Amphenol, Sidney, NY when ordering. B Cap without chain - 10-130969 64 MS/Standard AC Series/MSAccessories dust caps 10-70500 RECEPTACLE DUST CAP C L1 8S 10S 10SL 12S 12 14S 14 16S 16 18 20 22 24 28 32 36 40 Order Number 10-70500-8 10-70500-10 10-70500-10 10-70500-12 10-70500-12 10-70500-14 10-70500-14 10-70500-16 10-70500-16 10-70500-18 10-70500-20 10-70500-22 10-70500-24 10-70500-28 10-70500-32 10-70500-36 10-70500-40 A Dia. Nominal Thread MS Shell Size Order Number B Dia. Min. MS Shell Size for external threads A 10-70506 PLUG DUST CAP for internal threads 8S 10S 10SL 12S 12 14S 14 16S 16 18 20 22 24 28 32 36 40 B L2 65 10-70506-8S 10-70506-10S 10-70506-10S 10-70506-12 10-70506-12 10-70506-14 10-70506-14 10-70506-16 10-70506-16 10-70506-18 10-70506-20 10-70506-22 10-70506-24 10-70506-28 10-70506-32 10-70506-36 10-70506-40 .500 .625 .625 .750 .750 .875 .875 1.000 1.000 1.125 1.250 1.375 1.500 1.750 2.000 2.250 2.500 .469 .587 .587 .704 .704 .828 .828 .953 .953 1.072 1.197 1.322 1.447 1.697 1.947 2.190 2.440 C Dia. .031 .750 .875 .875 1.000 1.000 1.125 1.125 1.250 1.250 1.375 1.500 1.625 1.750 1.938 2.250 2.500 2.750 L1 .062 .500 .500 .500 .500 .500 .500 .500 .500 .500 .562 .562 .562 .562 .562 .562 .625 .625 L2 .125 .625 .625 .625 .625 .625 .625 .625 .625 .625 .625 .625 .625 .625 .625 .625 .625 .625 AC Series/MS application tools, torque values When proprietary crimp contacts are employed rather than the standard MS approved solder contacts, the following application tools are recommended for use. There is a possibility of additional crimping tools other than those included being available at present or in the future for this specific application. Complete instructions for providing reliable crimped wire to contact terminations and inserting proprietary crimp contacts in AC Series connectors are available in publication L-757. TOOLING CHART Crimping Tool Positioner/ Turret Contact Size Contact Style Insertion Tool M22520/1-01 * 16 Pin & Socket 11-7345 M22520/1-01 * 12 Pin & Socket 11-7082 ** ** 8 Pin & Socket 11-8220 ** ** 4 Pin & Socket 11-7365-4 ** ** 0 Pin & Socket 11-7365-5 * Use Daniels Turret TH29-1 or Astro Tool Co. Turret 616266 ** For appropriate crimp tool and positioner refer to Pico Crimping Tool Co. Tools used with Arbor Press 11-7364 RECOMMENDED TORQUE FORCES CONNECTOR BACKSHELLS Size 10SL 14S 16 16S 18 20 In./Lb. Max. 26 44 50 50 55 65 Size 22 24 28 32 36 40 In./Lb. Max. 85 90 114 120 153 170 66 Removal Tool 11-8250 Kit 11-8250 Kit 11-8250 Kit Pin 11-7370-4 Socket 11-7674-2 Pin 11-7370-5 Socket 11-7674-3 Additional Products reverse bayonet coupling 5015 type connectors Amphenol has replaced the previously available AC-B series with the ACA-B. The ACA-B is a modification of the SAE AS50151 family designed for commercial and industrial environments requiring a rugged bayonet style connector, including heavy duty power and signal applications. A comprehensive selection of insert arrangements and accessory hardware are available to accommodate heavy-duty, commercial wire and cable. The rugged shell is made from aluminum alloy and plated with a variety of finishes to meet any application. Features of the ACA-B Reverse Bayonet series: * Quick positive coupling with audible and tactile indication of full coupling. * Intermateable with existing VG95234 connectors * Rated 500 couplings minimum. * No lockwiring required * Inserts available in Neoprene material with alternate materials available upon request. * Contacts available in gold and silver plating * Available in both crimp and solder terminations * Numerous finishes available, including cadmium free zinc alloy. * Rugged construction; aluminum or stainless steel components. Amphenol ACA-B Reverse Bayonet Connectors Ask for Amphenol catalog IC-4 for further information on ACA-B Reverse Bayonet Connectors. GT Reverse Bayonet Connectors Amphenol GT Series of Connectors are heavy duty, rugged and environmentally resistant, and are the preferred interconnect for the mass transit industry. They are also used in power generation, petrochemical industries and heavy equipment/geophysical marketplaces. GT connector utilize SAE AS50151 and commercial inserts and are intermateable with existing VG95234 connectors. Other features include: * reverse bayonet coupling - quick mating, audible, visual and tactile full mating indicators. * UL recognized * rated to 2000 couplings min. * operating temperature range: * with Neoprene inserts: -55C to +125C * with Viton** inserts: -50C to +200C * with low smoke/flame retardant inserts: -55C to +125C * available in both crimp and solder termination * rugged construction - aluminum or stainless steel components * numerous military and commercial finishes available including gray zinc nickel (cadmium free) * resilient inserts provide high dielectric strength and moisture barrier. IP67 performance in environmental versions * over 40 varieties of shell styles and backend accessory combinations Ask for Amphenol catalog IC-4 for further information on GT Series Connectors. 67 Amphenol(R) GT Reverse Bayonet Connectors Amphe-Power GT Connectors are also available that incorporate RADSOK socket contacts. See page 31 for advantages and features of RADSOK contacts for high amperage capability. Additional MS/Standard AC Series/MS AlternateConnectors Designs offered by Amphenol, cont. Amphe-Power Amphe-PowerTMTM5015 5015Connectors Connectors Amphenol derived from thethe 5015 family Amphenoloffers offersthe theAC ACthreaded threadedseries series derived from MIL-5015 (R) that canthat be enhanced with highwith amperage RADSOK contacts. (R) contacts. family can be enhanced high amperage RADSOK Design Designcharacteristics characteristicsofofthe theAmphe-Power Amphe-Power5015 5015connectors connectorsare: are: * * The RADSOK contact handles 50% to 150% higher amperages The RADSOK contact handles up to 150% higher amperagesthan than standard standardcontacts contacts * * The TheRADSOK RADSOKcontact contacthas hasaatwisted twistedhyperbolic, hyperbolic,stamped stampedgrid gridconfig configuration within the socket. This design ensures a large, coaxial, uration within the socket. This design ensures a large, coaxial,facefaceto-face engagement. As male pin ispin inserted, axial memto-facesurface surfacearea area engagement. As male is inserted, axial bers in the female deflect, current flowcurrent across the members in the half female halfimparting deflect, high imparting high flow connection minimalwith voltage loss.voltage loss. across the with connection minimal * * Contact sockets in sizes 0, 4,0,8 4and 128 Contactarrangements arrangementshave haveRADSOK RADSOK sockets in sizes and with standard contacts in size 16. with standard contacts in sizes 16 and 12. The RADSOK and thethe amperages are are as folThecontacts contactsavailable availableinin RADSOK and amperages Amphe-Power(R) 5015 Connectors as follows: lows: (AC Threaded 5015 type connectors with RADSOK (R) high * Size 12 AWG cancan handle currents up to * Size 8 AWG handle currents up35 toamps. 69 amps. amperage contacts) * Size 8 AWG can handle currents up toup 70to amps. * Size 4 AWG can handle currents 120 amps. * Size 4 AWG can handle currents up toup 120 * Size 0 AWG can handle currents toamps. 250 amps. (For0availability of size 12 RADSOK * Size AWG can handle currents up tothat 250handles amps. currents * AC 5015 stylesAmphenol.) include: solid shell for general, up threaded to 35 amps, consult pressurized style use * non-environmental AC threaded 5015applications; styles include: solid shell for for general, on pressurized bulkheads or pressure barriers;style for use non-environmental applications; pressurized environmental resisting styleor with strain relief; lighter on pressurized bulkheads pressure barriers; environweight shorterstyle environmental style weight and mentaland resisting with strain resisting relief; lighter The RADSOK design - socket shorter environmental resisting style cylinder within female contact has twisted hyperbolic grid. For more information ask for Amphenol brochure SL-391, Amphe-Power Connectors with RADSOKbrochure technology. Provides higher amperage capaFor more information ask for Amphenol SL-391, bilities with low insertion force Amphe-Power Connectors with RADSOK technology. and low temperature rise. 5015 Connectors with PCB MIL-5015 Connectors with Contacts PCB Contacts Box 5015 type connectors can be supplied Boxmount mountreceptacle receptacle MIL-5015 type connectors can be with PCB tails mounting to a mounting printed circuit supplied withforPCB tails for to aboard. printed circuit board. Amphenol Industrial for part numbering. Consult See catalog 12-170, Amphenol Cylindrical Connectors for Printed Circuit Board Applications. This catalog gives the most commonly available and widely used insert patterns for cylindrical connectors with PCB tails, along with pin-out location diagrams. 68 72 AMPHENOL CORPORATION Amphenol Industrial Phone: 888-364-9011 191 Delaware Avenue Sidney, NY 13838-1395 www.amphenol-industrial.com Notice: Specifications are subject to change without notice. Contact your nearest Amphenol Corporation Sales Office for the latest specifications. All statements, information and data given herein are believed to be accurate and reliable but are presented without guarantee, warranty, or responsibility of any kind expressed or implied. Statements or suggestions concerning possible use of our products are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe any patent. The user should not assume that all safety measures are indicated or that other measures may not be required. Specifications are typical and may not apply to all connectors. IC-5 HKA 1-2016 Amphenol(R) 97 Series Connectors are UL recognized and CSA recognized.