NT Features IA PL CO M S oH C R1 51810 0S *R Applications Radial Leaded Devices Cured, flame retardant epoxy polymer insulating material meets UL 94V-0 requirements RoHS compliant* Agency recognition: COPAL ELECTRONICS Almost anywhere there is a low voltage power supply and a load to be protected, including: Computers & peripherals General electronics Automotive applications PRCP-R Series - Polymer Resettable Circuit Protectors Electrical Characteristics Ihold Model PRCP-R005** PRCP-R010 PRCP-R017 PRCP-R020 PRCP-R025 PRCP-R030 PRCP-R040 PRCP-R050 PRCP-R065 PRCP-R075 PRCP-R090 PRCP-R090-0-9 PRCP-R110 PRCP-R135 PRCP-R160 PRCP-R185 PRCP-R250 PRCP-R250-0-10 PRCP-R300 PRCP-R400 PRCP-R500 PRCP-R600 PRCP-R700 PRCP-R800 PRCP-R900 PRCP-R1100 V max. Volts I max. Amps 60 60 60 60 60 60 60 60 60 60 60 30 30 30 30 30 30 30 30 30 30 30 30 30 30 16 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 100 Itrip Amperes at 23 C Hold Trip 0.05 0.10 0.17 0.20 0.25 0.30 0.40 0.50 0.65 0.75 0.90 0.90 1.10 1.35 1.60 1.85 2.50 2.50 3.00 4.00 5.00 6.00 7.00 8.00 9.00 11.00 0.10 0.20 0.34 0.40 0.50 0.60 0.80 1.00 1.30 1.50 1.80 1.80 2.20 2.70 3.20 3.70 5.00 5.00 6.00 8.00 10.00 12.00 14.00 16.00 18.00 22.00 Initial Resistance Ohms at 23 C Min. Max. 7.3 2.50 2.00 1.50 1.00 0.76 0.52 0.41 0.27 0.18 0.14 0.07 0.10 0.065 0.055 0.040 0.025 0.025 0.020 0.010 0.010 0.005 0.005 0.005 0.005 0.003 11.1 4.50 3.20 2.84 1.95 1.36 0.86 0.77 0.48 0.40 0.31 0.12 0.18 0.115 0.105 0.07 0.048 0.048 0.05 0.03 0.03 0.02 0.02 0.02 0.01 0.01 1 Hour (R1) Post-Trip Resistance Ohms at 23 C Max. 22.0 7.50 8.00 4.40 3.00 2.10 1.29 1.17 0.72 0.60 0.47 0.22 0.27 0.17 0.15 0.11 0.07 0.07 0.08 0.05 0.05 0.04 0.03 0.03 0.02 0.014 Max. Time To Trip Amperes at 23 C 0.5 0.5 0.85 1.0 1.25 1.5 2.0 2.5 3.25 3.75 4.5 4.5 5.5 6.75 8.0 9.25 12.5 12.5 15.0 20.0 25.0 30.0 35.0 40.0 45.0 40.0 Tripped Power Dissipation Seconds at 23 C 5.0 4.0 3.0 2.2 2.5 3.0 3.8 4.0 5.3 6.3 7.2 5.9 6.6 7.3 8.0 8.7 10.3 10.3 10.8 12.7 14.5 16.0 17.5 18.8 ***20.0 20.0 ** UL/TUV only Watts at 23 C Typ. 0.22 0.38 0.48 0.40 0.45 0.50 0.55 0.75 0.90 0.90 1.00 0.60 0.70 0.80 0.90 1.00 1.20 1.20 2.00 2.50 3.00 3.50 3.80 4.00 4.20 4.50 ***Tested at 40 amps Environmental Characteristics Operating/Storage Temperature ........................-40 C to +85 C Maximum Device Surface Temperature in Tripped State ................................................125 C Passive Aging......................................................+85 C, 1000 hours ....................................5 % typical resistance change Humidity Aging....................................................+85 C, 85 % R.H. 1000 hours....................5 % typical resistance change Thermal Shock ....................................................-40 C to +85 C, 10 times ..........................10 % typical resistance change Solvent Resistance ............................................MIL-STD-202, Method 215 ........................No change Vibration ..............................................................MIL-STD-883C, Method 2007.1, ................No change Condition A Test Procedures And Requirements For Model PRCP-R Series Test Test Conditions Accept/Reject Criteria Visual/Mech. ......................................................Verify dimensions and materials..................Per PRCP physical description Resistance ..........................................................In still air @ 23 C ........................................Rmin R Rmax Time to Trip ........................................................5 times Ihold, Vmax, 23 C..........................T max. time to trip (seconds) Hold Current ......................................................30 min. at Ihold............................................No trip Trip Cycle Life ....................................................Vmax, Imax, 100 cycles ..............................No arcing or burning Trip Endurance....................................................Vmax, 48 hours ..........................................No arcing or burning UL File Number ..................................................E300792 CSA File Number ................................................CA1730526 TUV File Number ................................................R 50075506 *RoHS Directive 2002/95/EC Jan 27 2003 including Annex. Product manufactured with a date code later than April 1, 2005 is RoHS compliant. Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. Additional Features Bulk packaging, tape and reel available on most models PRCP-R Series - Polymer Resettable Circuit Protectors COPAL ELECTRONICS Product Dimensions (see next page for outline drawing) Model PRCP-R005 PRCP-R010 PRCP-R017 PRCP-R020 PRCP-R025 PRCP-R030 PRCP-R040 PRCP-R050 PRCP-R065 PRCP-R075 PRCP-R090 PRCP-R090-0-9 PRCP-R110 PRCP-R135 PRCP-R160 PRCP-R185 PRCP-R250 PRCP-R250-0-10 PRCP-R300 PRCP-R400 PRCP-R500 PRCP-R600 PRCP-R700 PRCP-R800 PRCP-R900 PRCP-R1100 A Max. 8.0 (0.315) 7.4 (0.291) 7.4 (0.291) 7.4 (0.291) 7.4 (0.291) 7.4 (0.291) 7.4 (0.291) 7.9 (0.311) 9.7 (0.382) 10.4 (0.409) 11.7 (0.461) 7.4 (0.291) 8.9 (0.350) 8.9 (0.350) 10.2 (0.402) 12.0 (0.472) 12.0 (0.472) 12.0 (0.472) 12.0 (0.472) 14.4 (0.567) 17.4 (0.685) 19.3 (0.760) 22.1 (0.870) 24.2 (0.953) 24.2 (0.953) 24.2 (0.953) B Max. 8.3 (0.327) 12.7 (0.5) 12.7 (0.5) 12.7 (0.5) 12.7 (0.5) 13.4 (0.528) 13.7 (0.539) 13.7 (0.539) 15.2 (0.598) 16.0 (0.630) 16.7 (0.657) 12.2 (0.480) 14.0 (0.551) 18.9 (0.744) 16.8 (0.661) 18.4 (0.724) 18.3 (0.720) 18.3 (0.720) 18.3 (0.720) 24.8 (0.976) 24.9 (0.980) 31.9 (1.256) 29.8 (1.173) 32.9 (1.295) 32.9 (1.295) 32.9 (1.295) C Nom. 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 5.1 (0.201) 10.2 (0.402) 10.2 (0.402) 10.2 (0.402) 10.2 (0.402) 10.2 (0.402) 10.2 (0.402) Tol. 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) 0.7 (0.028) D Min. 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) 7.6 (0.299) E Max. 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) 3.1 (0.122) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) 3.0 (0.118) Packaging options: BULK: All models = 500 pcs. per bag. TAPE & REEL: PRCP-R005-PRCP-R160 - 12.7 mm device pitch = 3000 pcs. per reel; PRCP-R185-PRCP-R400 - 25.4mm device pitch = 1500 pcs. per reel; PRCP-R250-0-10 = 1500 pcs. per reel. Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. Physical Characteristics Style Lead Dia. Material 0.405 4 Sn/NiCu (0.016) 0.51 1 Sn/NiCu (0.020) 0.51 1 Sn/CuFe (0.020) 0.51 1 Sn/CuFe (0.020) 0.51 1 Sn/CuFe (0.020) 0.51 1 Sn/CuFe (0.020) 0.51 1 Sn/CuFe (0.020) 0.51 1 Sn/Cu (0.020) 0.51 1 Sn/Cu (0.020) 0.51 1 Sn/Cu (0.020) 0.51 1 Sn/Cu (0.020) 0.51 3 Sn/CuFe (0.020) 0.51 1 Sn/Cu (0.020) 0.51 1 Sn/Cu (0.020) 0.51 1 Sn/Cu (0.020) 0.51 1 Sn/Cu (0.020) 0.81 2 Sn/Cu (0.032) 0.51 3 Sn/CuFe (0.020) 0.81 2 Sn/Cu (0.032) 0.81 2 Sn/Cu (0.032) 0.81 2 Sn/Cu (0.032) 0.81 2 Sn/Cu (0.032) 0.81 2 Sn/Cu (0.032) 0.81 2 Sn/Cu (0.032) 0.81 2 Sn/Cu (0.032) 0.81 2 Sn/Cu (0.032) DIMENSIONS = 0.405 (26AWG) 0.51 (24AWG) 0.81 (20AWG) MM (INCHES) PRCP-R Series - Polymer Resettable Circuit Protectors COPAL ELECTRONICS Product Dimensions (see previous page for dimensions) Style 1 Style 2 A E Style 3 A Style 4 A E B B A E B E B D C D D D C C C NOTE: Kinked lead option is available for board standoff. Contact factory for details. NOTE: Also available with straight leads. Contact factory for details. Thermal Derating Chart - Ihold / Itrip (Amps) Model PRCP-R005 PRCP-R010 PRCP-R017 PRCP-R020 PRCP-R025 PRCP-R030 PRCP-R040 PRCP-R050 PRCP-R065 PRCP-R075 PRCP-R090 PRCP-R090-0-9 PRCP-R110 PRCP-R135 PRCP-R160 PRCP-R185 PRCP-R250 PRCP-R250-0-10 PRCP-R300 PRCP-R400 PRCP-R500 PRCP-R600 PRCP-R700 PRCP-R800 PRCP-R900 PRCP-R1100 Ambient Operating Temperature -40 C 0.08 / 0.16 0.16 / 0.32 0.26 / 0.52 0.31 / 0.62 0.39 / 0.78 0.47 / 0.94 0.62 / 1.24 0.78 / 1.56 1.01 / 2.02 1.16 / 2.32 1.40 / 2.80 1.40 / 2.80 1.60 / 3.20 1.96 / 3.92 2.32 / 4.64 2.68 / 5.36 3.63 / 7.26 3.63 / 7.26 4.35 / 8.70 5.80 / 11.6 7.25 / 14.5 8.70 / 17.4 10.1 / 20.3 11.6 / 23.2 13.0 / 26.1 16.1 / 32.0 -20 C 0.07 / 0.14 0.14 / 0.28 0.23 / 0.46 0.27 / 0.54 0.34 / 0.68 0.41 / 0.82 0.54 / 1.08 0.68 / 1.36 0.88 / 1.76 1.02 / 2.04 1.22 / 2.44 1.22 / 2.44 1.43 / 2.86 1.76 / 3.52 2.08 / 4.16 2.41 / 4.82 3.25 / 6.50 3.25 / 6.50 3.90 / 7.80 5.20 / 10.4 6.50 / 13.0 7.80 / 15.6 9.10 / 18.2 10.4 / 20.8 11.7 / 23.4 14.6 / 29.2 0 C 0.06 / 0.12 0.12 / 0.24 0.20 / 0.40 0.24 / 0.48 0.30 / 0.60 0.36 / 0.72 0.48 / 0.96 0.60 / 1.20 0.77 / 1.54 0.89 / 1.78 1.07 / 2.14 1.07 / 2.14 1.27 / 2.54 1.55 / 3.10 1.84 / 3.68 2.13 / 4.26 2.88 / 5.76 2.88 / 5.76 3.45 / 6.90 4.60 / 9.20 5.75 / 11.5 6.90 / 13.8 8.05 / 16.1 9.20 / 18.4 10.3 / 20.7 13.1 / 26.2 23 C 0.05 / 0.10 0.10 / 0.20 0.17 / 0.34 0.20 / 0.40 0.25 / 0.50 0.30 / 0.60 0.40 / 0.80 0.50 / 1.00 0.65 / 1.30 0.75 / 1.50 0.90 / 1.80 0.90 / 1.80 1.10 / 2.20 1.35 / 2.70 1.60 / 3.20 1.85 / 3.70 2.50 / 5.00 2.50 / 5.00 3.00 / 6.00 4.00 / 8.00 5.00 / 10.0 6.00 / 12.0 7.00 / 14.0 8.00 / 16.0 9.00 / 18.0 11.0 / 22.1 40 C 0.04 / 0.08 0.08 / 0.16 0.14 / 0.28 0.16 / 0.32 0.20 / 0.40 0.24 / 0.48 0.32 / 0.64 0.41 / 0.82 0.53 / 1.06 0.61 / 1.22 0.73 / 1.46 0.73 / 1.46 0.91 / 1.82 1.12 / 2.24 1.33 / 2.66 1.54 / 3.08 2.08 / 4.16 2.08 / 4.16 2.49 / 4.98 3.32 / 6.64 4.15 / 8.30 4.98 / 9.96 5.81 / 11.6 6.64 / 13.2 7.47 / 14.9 9.40 / 18.4 50 C 0.04 / 0.08 0.07 / 0.14 0.12 / 0.24 0.14 / 0.28 0.18 / 0.36 0.22 / 0.44 0.29 / 0.58 0.36 / 0.72 0.47 / 0.94 0.54 / 1.08 0.65 / 1.30 0.65 / 1.30 0.85 / 1.70 1.04 / 2.08 1.23 / 2.46 1.42 / 2.84 1.93 / 3.86 1.93 / 3.86 2.31 / 4.62 3.08 / 6.16 3.85 / 7.70 4.62 / 9.24 5.39 / 10.7 6.16 / 12.3 6.93 / 12.7 8.80 / 17.6 60 C 0.03 / 0.07 0.06 / 0.12 0.11 / 0.22 0.13 / 0.26 0.16 / 0.32 0.19 / 0.38 0.25 / 0.50 0.32 / 0.64 0.41 / 0.82 0.47 / 0.94 0.57 / 1.14 0.57 / 1.14 0.75 / 1.50 0.92 / 1.84 1.09 / 2.18 1.26 / 2.52 1.70 / 3.40 1.70 / 3.40 2.04 / 4.08 2.72 / 5.44 3.40 / 6.80 4.08 / 8.16 4.76 / 9.52 5.44 / 10.8 6.12 / 12.2 7.80 / 15.6 70 C 0.03 / 0.07 0.05 / 0.10 0.09 / 0.18 0.11 / 0.22 0.14 / 0.28 0.16 / 0.32 0.22 / 0.44 0.27 / 0.54 0.35 / 0.70 0.41 / 0.82 0.49 / 0.98 0.49 / 0.98 0.67 / 1.34 0.82 / 1.64 0.98 / 1.96 1.13 / 2.26 1.53 / 3.06 1.53 / 3.06 1.83 / 3.66 2.44 / 4.88 3.05 / 6.10 3.66 / 7.32 4.27 / 9.44 4.88 / 9.76 5.49 / 10.9 6.90 / 13.8 85 C 0.02 / 0.05 0.04 / 0.08 0.07 / 0.14 0.08 / 0.16 0.10 / 0.20 0.12 / 0.24 0.16 / 0.32 0.20 / 0.40 0.26 / 0.52 0.30 / 0.60 0.36 / 0.72 0.36 / 0.72 0.57 / 1.14 0.70 / 1.40 0.83 / 1.66 0.96 / 1.92 1.30 / 2.60 1.30 / 2.60 1.56 / 3.12 2.08 / 4.16 2.60 / 5.20 3.12 / 6.24 3.64 / 7.28 4.16 / 8.32 4.68 / 9.36 5.20 / 10.4 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. PRCP-R Series - Polymer Resettable Circuit Protectors COPAL ELECTRONICS How to Order PR CP PR -R00 5 CP -R0 10 PR CP PR -R01 CP 7 PR -R02 0 CP PR R02 CP 5 PR -R03 CP 0 PR -R04 CP 0 R PR CP 050 PR -R06 5 CP PR -R07 CP 5 -R0 90 Typical Time to Trip at 23 C PRCP - R 110 - 0 - 99 Product Designator Series R = Radial Leaded Component Hold Current, Ihold 005-1100 (0.05 Amps - 11.0 Amps) Packaging Options - 0 = Bulk packaging - 2 = Tape and Reel Ti m e t o t r i p ( Sec o n d s ) 100 Part Number Suffix Option - 99 = Part number suffix option for customers requiring a new part number to reference the engineering change to RoHS compliance. 10 1 0.1 0.01 Typical Part Marking:PRCP-R005-R025 0.001 0.1 1 10 100 Fault Current (Amps) Represents total content. Layout may vary. PR - 0 -CP-R 9 090 PR CP PR -R110 CP PR -R135 CP PR -R16 0 CP PR -R18 CP 5 R 2 5 0 25 - 0 - 0, PR 1 0 CP PR -R30 CP 0 PR -R40 0 CP PR -R50 CP 0 R PR CP 600 PR -R70 0 CP PR -R80 0 CP PR -R90 CP 0 -R1 100 PART IDENTIFICATION MANUFACTURER'S MARK R025 5A DATE CODE: WEEK 1 OF 2005 = 5A (YEAR & WEEK) WEEK 27 OF 2005 = A5 (WEEK & YEAR) Typical Part Marking:PRCP-R030-R1100 Represents total content. Layout may vary. Ti m e t o t r i p ( Sec o n d s ) 100 PART IDENTIFICATION 10 DATE CODE (FIRST DIGIT = LAST DIGIT OF YEAR; NEXT THREE DIGITS = DAY OF YEAR) 1 0.1 0.01 0.001 1 10 Fault Current (Amps) Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 100 R250 5180S MANUFACTURER'S MARK LOT NO. (S = CHINA) COPAL ELECTRONICS PRCP-R Series Tape and Reel Specifications Devices taped using EIA468-B/IEC286-2 standards. See table below and Figures 1 and 2 for details. Dimension Description IEC Mark EIA Mark Carrier tape width W W Hold down tape width: W0 W4 Hold down tape Top distance between tape edges Dimensions Dimensions Tolerance 18 (.709) 11 (.433) min. No protrusion W2 W6 3 (.118) max. 9 (.354) 4 (.157) 18.5 (.728) 16 (.63) 38.0 (1.496) 32.2 (1.268) 55.0 (2.165) 43.2 (1.7) 54.0 (2.126) 42.5 (1.673) 1.0 (.039) 11 (.433) -0.5/+0.75 (-0.02/+0.03) 0.2 (.0078) 3.0 (.118) 0.5 (.02) Sprocket hole position W1 W5 Sprocket hole diameter D0 D0 Abscissa to plane (straight lead) H H Abscissa to plane (kinked lead) H0 H0 Abscissa to top (straight lead) H1 H1 Abscissa to top (kinked lead) H1 H1 Overall width w/lead protrusion (straight lead) C1 Overall width w/lead protrusion (kinked lead) C1 Overall width w/o lead protrusion (straight lead) C2 C2 Overall width w/o lead protrusion (kinked lead) Lead protrusion I1 L1 Protrusion of cutout L L Protrusion beyond hold tape I2 I2 Not specified Sprocket hole pitch P0 P0 12.7 (0.5) Pitch tolerance Device pitch: PRCP-R005-PRCP-R160 Device pitch: PRCP-R185-PRCP-R400 Tape thickness Tape thickness with splice: -0.5/+1.0 (-0.02/+.039) t PRCP-R010-PRCP-R160 Tape thickness with splice: PRCP-R250-PRCP-R1100 max. max. max. max. max. max. max. max. 20 consecutive 0.3 (.012) 1 (.039) 12.7 (0.5) 0.3 (.012) 25.4 (1.0) 0.6 (.024) t1 0.9 (.035) 1.5 (.059) max. t1 2.3 (.091) max. t Splice sprocket hole alignment 0 Body lateral deviation h h Body tape plane deviation p p Lead spacing F F Reel width w W2 Reel diameter d a Space between flanges less device W1 h 0 0 5.08 (0.2) 56 (2.205) 370 (14.57) 4.75 (.187) max. 0.3 (.012) 1.0 (.039) 1.3 (.051) 0.2 (.008) max. max. 3.25 (.128) DIMENSIONS = MM (INCHES) Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. COPAL ELECTRONICS PRCP-R Series Tape and Reel Specifications IEC Mark Dimension Description Dimensions Dimensions Tolerance EIA Mark Arbor hole diameter f c 26 (1.024) 12.0 (.472) Core diameter h n 80 (3.15) max. 62 (2.44) Box 355 (14.0) Consecutive missing places 345 (13.6) max. 3 Empty places per reel max. Not specified Taped Component Dimensions - Figure 1 p h h p Reference plane P1 H1 A L I2 H1 F I1 H0 B P0 W0 D0 H DIMENSIONS = W1 W User direction of feed Cross section A - B Reel Dimensions - Figure 2 t Reel h d f h w Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. User direction of feed Upper side Tape Lower side MM (INCHES) Revision History Date Rev. Reason 11/02/2005 A Initial issue 12/12/2005 B Updated UL, CSA, TUV File Number 06/01/2007 C Updated Packaging options 07/15/2011 D Updated Typical Part Marking 02/20/2013 E Updated Environmental Characteristics 10/02/2013 F Updated Tape and Reel Specifications COPAL ELECTRONICS NIDEC COPAL ELECTRONICS CORP. Japan Head Office Nishi-Shinjuku, Kimuraya Bldg., 7-5-25 Nishi-Shinjuku, Shinjuku-ku, Tokyo 160-0023 Phone: +81-3-3364-7055 Fax: +81-3-3364-7098 www.nidec-copal-electronics.com Revision : F Issue date : 10/02/13 PRCP-R SERIES Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications.