BAS70
IFAG IMM RPD D HIR 1 of 3 V2, Februar 2011
HiRel Silicon Schottky Diode
HiRel Discrete and Microwave
Semiconductor
General-purpose diodes for high-speed
switching
Circuit protection
Voltage clamping
High-level detecting and mixing
Hermetically sealed microwave package
Space Qualified
ESA/SCC Detail Spec. No.: 5512/020
Type Variant No. 01
ESD: Electrostatic discharge sensitive device,
observe handling precautions!
Type
Marking
Ordering Code
Pin Configuration
Package
BAS70-T1 (ql)
-
see below
1 2
T1
(ql) Quality Level: P: Professional Quality
H: High Rel Quality
S: Space Quality
ES: ESA Space Quality
(see order instructions for ordering example)
BAS70
IFAG IMM RPD D HIR 2 of 3 V2, Februar 2011
Maximum Ratings
Parameter
Symbol
Values
Unit
Reverse Voltage
VR
70
V
Forward Current
IF
70
mA
Surge Forward Current 1)
IFSM
85
mA
Power Dissipation 2)
Ptot
250
mW
Operating Temperature Range
Top
-55 to +150
°C
Storage Temperature Range
Tstg
-55 to +150
°C
Soldering Temperature 3)
Tsol
+250
°C
Junction Temperature
Tj
150
°C
Thermal Resistance Junction-Case
Rth(j-c)
100
K/W
Electrical Characteristics
at TA=25°C; unless otherwise specified
Parameter
Symbol
Values
Unit
min.
typ.
max.
DC Characteristics
Reverse Current 1, VR=70V
IR1
-
-
2
µA
Reverse Current 2, VR=56V
IR2
-
-
0,1
µA
Forward Voltage 1, IF1=1mA
VF1
0,30
0,38
0,44
V
Forward Voltage 2, IF2=10mA
VF2
0,60
0,70
0,78
V
Forward Voltage 3, IF3=15mA
VF3
0,80
0,85
1,00
V
Differential Forward Resistance 4)
IF2=10mA, IF3=15mA
RFD
24
30
32
AC Characteristics
Total Capacitance
VR=0V; f=1MHz
CT
1,2
1,5
2
pF
Notes.:
1.) t 10ms, Duty Cycle=10%
2.) At TCASE = 125 °C. For TCASE > 125 °C derating is required.
3.) During 5 sec. maximum. The same terminal shall not be resoldered until 3 minutes have elapsed.
VF
4.) RFD=----------------
5x10-3 A
BAS70
IFAG IMM RPD D HIR 3 of 3 V2, Februar 2011
T1 Package
B
C
Y1 Y2
X1
G
D
H
A
E
F
G
12
Edition 2011-02
Published by
Infineon Technologies AG
85579 Neubiberg, Germany
© Infineon Technologies AG 2011
All Rights Reserved.
Attention please!
The information given in this document shall in no event be regarded as a guarantee of
conditions or characteristics (“Beschaffenheitsgarantie“). With respect to any examples or
hints given herein, any typical values stated herein and/or any information regarding the
application of the device, Infineon Technologies hereby disclaims any and all warranties and
liabilities of any kind, including without limitation warranties of non-infringement of intellectual
property rights of an third party.
Information
For further information on technology, delivery terms and conditions and prices please
contact your nearest Infineon Technologies Office (www.infineon.com).
Warnings
Due to technical requirements components may contain dangerous substances. For
information on the types in question please contact your nearest Infineon Technologies
Office.
Infineon Technologies Components may only be used in life-support devices or systems with
the express written approval of Infineon Technologies, if a failure of such components can
reasonably be expected to cause the failure of that life-support device or system, or to affect
the safety or effectiveness of that device or system.
Life support devices or systems are intended to be implanted in the human body, or to
support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to
assume that the health of the user or other persons may be endangered.
Symbol
Millimetre
min
max
A
1,30
1,45
B
1,15
1,35
C
-
0,40
D
0,10
0,50
E
-
0,30
F
0,06
0,10
G
5,50
-
H
0,40
0,60
