https://www.phoenixcontact.com/us/products/2313928
09/03/2014Page2/4
Network isolator-FL ISOLATOR 100-RJ/SC-2313928
Technical data
Ambient conditions
Permissible humidity (operation) 10 % ... 95 % (non-condensing)
Permissible humidity (storage/transport) 5 % ... 95 % (non-condensing)
Altitude 5000 m (For restrictions see manufacturer's declaration)
Degree of protection IP20
General
Electrical isolation Ethernet // Ethernet
Test voltage data interface/data interface 4 kV AC (50 Hz, 1 min.)
Insulation voltage input/output 250 Vrms
Standards/regulations EN 50121 and EN 50155 (for railway applications)
Electromagnetic compatibility Conformance with EMC Directive 2004/108/EC
Net weight 90 g
Housing material PA 6.6-FR
Color green
MTBF 26549 Years (Telcordia standard, 25°C temperature, 21% operating cycle
(5 days a week, 8 hours a day))
9033 Years (Telcordia standard, 40°C temperature, 34.25% operating
cycle (5 days a week, 12 hours a day))
UL, USA / Canada 508 listed
Serial interface
Interface 1 Ethernet interface, 10/100BASE-T(X) in acc. with IEEE 802.3u
Interface Ethernet
Connection method RJ45 socket, shielded
Transmission length ≤ 100 m (Total length across both ports (dependent on data rate and cable
used))
Serial transmission speed 10/100 Mbps
Interface 2 Ethernet interface, 10/100/1000Base-T(X) according to IEEE 802.3u
Interface Ethernet
Connection method COMBICON screw terminal block
Transmission length ≤ 100 m (Total length across both ports (dependent on data rate and cable
used))
Conductor cross section solid min. 0.14 mm²
Conductor cross section solid max. 1.5 mm²
Conductor cross section stranded min. 0.14 mm²
Conductor cross section stranded max. 1.5 mm²
Conductor cross section AWG/kcmil min. 26
Conductor cross section AWG/kcmil max 16