Data sheet| Item number:2002-1611
2-conductor fuse terminal block; with pivoting fuse holder; and end plate; for
5 x 20 mm miniature metric fuse; without blown fuse indication; for DIN-rail
35 x 15 and 35 x 7.5; 2.5 mm²; Push-in CAGE CLAMP®; 2,50 mm²; gray
www.wago.com/2002-1611
Subject to changes. Please also observe the further product documentation!
WAGO Kontakttechnik GmbH & Co. KG
Hansastr. 27
32423 Minden
Phone: +49571 887-0 | Fax: +49571 887-169
Email: info.de@wago.com | Web: www.wago.com
Do you have any questions about our products?
We are always happy to take your call at +49 (571) 887-44222.
16.03.2021Page /1 18
Color:
Data sheet| Item number:2002-1611
www.wago.com/2002-1611
Subject to changes. Please also observe the further product documentation!
WAGO Kontakttechnik GmbH & Co. KG
Hansastr. 27
32423 Minden
Phone: +49571 887-0 | Fax: +49571 887-169
Email: info.de@wago.com | Web: www.wago.com
Do you have any questions about our products?
We are always happy to take your call at +49 (571) 887-44222.
16.03.2021Page /2 18
Item description
Safety information 1:
Electrical ratings are given by the fuse.
Data
Electrical data
Power loss (max.) P (note)
l (max.) When selecting glass cartridge fuses, make sure that the maximum
power loss listed below is not exceeded. The power loss is
determined according to IEC or EN 60947-7-3/VDE 0611-6 at 23°C.
The temperature rise of the terminal block must be checked
according to their application and mounting. Higher ambient
temperatures represent an additional impact on miniature fuses.
Therefore, in such applications, the rated current must be reduced if
necessary. More details are available from the manufacturers.
Power loss P (max )
l . 1.6 W
Power loss P (note)
lOverload and short circuit protection (Individual arrangement)
Power loss P 2 (max.)
l1.6 W
Power loss P 2 (note)
lOverload and short circuit protection (Group arrangement)
Power loss P 3 (max )
l . 2.5 W
Power loss P 3 (note)
lShort circuit protection only (Individual arrangement)
Power loss P 4 (max )
l . 2.5 W
Power loss P 4 (note)
lShort circuit protection only (Group arrangement)
Ratings per IEC/EN
Ratings per IEC/EN 60947-7-3
Nominal voltage (III/3) 250 V
Rated surge voltage (III/3) 6 kV
Rated current 6.3 A
Legend (ratings) (III / 3) ≙ Overvoltage category III / Pollution degree 3
Ratings per UL
Approvals per UL 1059
Rated voltage UL (Use Group B) 250 V
Rated current UL (Use Group B) 10 A
Rated voltage UL (Use Group C) 250 V
Data sheet| Item number:2002-1611
www.wago.com/2002-1611
Subject to changes. Please also observe the further product documentation!
WAGO Kontakttechnik GmbH & Co. KG
Hansastr. 27
32423 Minden
Phone: +49571 887-0 | Fax: +49571 887-169
Email: info.de@wago.com | Web: www.wago.com
Do you have any questions about our products?
We are always happy to take your call at +49 (571) 887-44222.
16.03.2021Page /3 18
Rated voltage UL (Use Group C) 250 V
Rated current UL (Use Group C) 10 A
Rated voltage UL (Use Group D) 250 V
Rated current UL (Use Group D) 10 A
Ratings per CSA
Approvals per C22.2 No 158
Rated voltage CSA (Use Group B) 250 V
Rated current CSA (Use Group B) 10 A
Rated voltage CSA (Use Group C) 250 V
Rated current CSA (Use Group C) 10 A
Ex information
Ratings per ATEX: KIWA 17 ATEX 0030 U / IECEx: KIWA 17.0014U (Ex ec IIC Gc)
Rated voltage EN (Ex e II) 275 V
Rated current (Ex e II) 6.3 A
Connection data
Connection technology Push-in CAGE CLAMP®
Actuation type Push-in
Open Tool Slot
Connectable conductor materials Copper
Nominal cross-section 2.5mm²
Solid conductor 0.25 … 4mm²/ 22 … 12AWG
Solid conductor; push-in termination 0.75 … 4mm²/ 18 … 12AWG
Fine-stranded conductor 0.25 … 4mm²/ 22 … 12AWG
Fine-stranded conductor; with insulated ferrule 1 … 2.5mm²/ 18 … 14AWG
Fine-stranded conductor; with ferrule; push-in termination 1 … 2.5mm²/ 18 … 14AWG
Note (conductor cross-section) Depending on the conductor characteristic, a conductor with a
smaller cross-section can also be inserted via push-in termination.
Strip length 10 … 12mm/ 0.39 … 0.47inch
Total number of connection points 2
Total number of potentials 1
Number of levels 1
Wiring type Front-entry wiring
Number of jumper slots 2
Physical data
Data sheet| Item number:2002-1611
www.wago.com/2002-1611
Subject to changes. Please also observe the further product documentation!
WAGO Kontakttechnik GmbH & Co. KG
Hansastr. 27
32423 Minden
Phone: +49571 887-0 | Fax: +49571 887-169
Email: info.de@wago.com | Web: www.wago.com
Do you have any questions about our products?
We are always happy to take your call at +49 (571) 887-44222.
16.03.2021Page /4 18
Physical data
Width 6.2mm/ 0.244inch
Height 66.1mm/ 2.602inch
Mechanical data
Design horizontal type
Mounting type DIN-35 rail
Marking level Center/side marking
Material data
Color gray
Insulation material Polyamide (PA66)
Fire load 0.227 MJ
Weight 13.2 g
Commercial data
Product Group 22 (TOPJOB S)
Packaging type BOX
Country of origin CN
GTIN 4045454974732
Customs tariff number 85369095000
Approvals / Certificates
Ex-Approvals
Logo Approval Additional Approval Text Certificate name
AEx
Underwriters Laboratories Inc.
UL 60079 20190704-E185892
ATEX
KIWA Netherlands B.V.
EN 60079 KIWA 17ATEX0030
U
CCCEx
CQST/CNEx
CNCA-C23-01 2020312313000180
IECEx
KIWA Netherlands B.V.
EN 60079 IECEx KIWA 17.0014
U
Data sheet| Item number:2002-1611
www.wago.com/2002-1611
Subject to changes. Please also observe the further product documentation!
WAGO Kontakttechnik GmbH & Co. KG
Hansastr. 27
32423 Minden
Phone: +49571 887-0 | Fax: +49571 887-169
Email: info.de@wago.com | Web: www.wago.com
Do you have any questions about our products?
We are always happy to take your call at +49 (571) 887-44222.
16.03.2021Page /5 18
KIWA Netherlands B.V. U
Country specific Approvals
Logo Approval Additional Approval Text
Certificate
name
CCA
DEKRA Certification B.V.
EN 60947 NTR NL
7730
KEMA/KEUR
DEKRA Certification B.V.
EN 60947 71-
107687
Ship Approvals
Logo Approval Additional Approval Text
Certificate
name
ABS
American Bureau of Shipping
EN 60947 20-
HG1941090-
PDA
DNV GL
Det Norske Veritas, Germanischer Lloyd
- TAE00001V2
LR
Lloyds Register
EN 60947 91/20112
(E9)
Compatible products
Carrier rail
Item no.: 210-112
Steel carrier rail; 35 x 7.5 mm; 1 mm thick; 2 m long; slotted; according to EN 60715; "Hole width 25 mm;
silver-colored
www.wago.com/210-112
Item no.: 210-113
Steel carrier rail; 35 x 7.5 mm; 1 mm thick; 2 m long; unslotted; according to EN 60715; silver-colored www.wago.com/210-113
Item no.: 210-114
Steel carrier rail; 35 x 15 mm; 1.5 mm thick; 2 m long; unslotted; similar to EN 60715; silver-colored www.wago.com/210-114
Item no.: 210-115
Data sheet| Item number:2002-1611
www.wago.com/2002-1611
Subject to changes. Please also observe the further product documentation!
WAGO Kontakttechnik GmbH & Co. KG
Hansastr. 27
32423 Minden
Phone: +49571 887-0 | Fax: +49571 887-169
Email: info.de@wago.com | Web: www.wago.com
Do you have any questions about our products?
We are always happy to take your call at +49 (571) 887-44222.
16.03.2021Page /6 18
Item no.: 210-115
Steel carrier rail; 35 x 7.5 mm; 1 mm thick; 2 m long; slotted; according to EN 60715; "Hole width 18 mm;
silver-colored
www.wago.com/210-115
Item no.: 210-118
Steel carrier rail; 35 x 15 mm; 2.3 mm thick; 2 m long; unslotted; according to EN 60715; silver-colored www.wago.com/210-118
Item no.: 210-196
Aluminum carrier rail; 35 x 8.2 mm; 1.6 mm thick; 2 m long; unslotted; similar to EN 60715; silver-colored www.wago.com/210-196
Item no.: 210-197
Steel carrier rail; 35 x 15 mm; 1.5 mm thick; 2 m long; slotted; similar to EN 60715; silver-colored www.wago.com/210-197
Item no.: 210-198
Copper carrier rail; 35 x 15 mm; 2.3 mm thick; 2 m long; unslotted; according to EN 60715; copper-
colored
www.wago.com/210-198
Item no.: 210-504
Steel carrier rail; 35 x 7.5 mm; 1 mm thick; 2 m long; slotted; galvanized; according to EN 60715; silver-
colored
www.wago.com/210-504
Item no.: 210-505
Steel carrier rail; 35 x 7.5 mm; 1 mm thick; 2 m long; unslotted; galvanized; according to EN 60715;
silver-colored
www.wago.com/210-505
Item no.: 210-506
Steel carrier rail; 35 x 15 mm; 1.5 mm thick; 2 m long; unslotted; galvanized; similar to EN 60715; silver-
colored
www.wago.com/210-506
Item no.: 210-508
Steel carrier rail; 35 x 15 mm; 1.5 mm thick; 2 m long; slotted; galvanized; similar to EN 60715; silver-
colored
www.wago.com/210-508
Marking accessories
Item no.: 2009-110
Marking strips; for Smart Printer; on reel; not stretchable; plain; snap-on type; white www.wago.com/2009-110
Item no.: 2009-115
WMB-Inline; for Smart Printer; 1500 pieces on roll; stretchable 5 - 5.2 mm; plain; snap-on type; white www.wago.com/2009-115
Item no.: 2009-115/000-002
WMB-Inline; for Smart Printer; 1500 pieces on roll; stretchable 5 - 5.2 mm; plain; snap-on type; yellow
www.wago.com/2009-115
/000-002
Item no.: 2009-115/000-005
WMB-Inline; for Smart Printer; 1500 pieces on roll; stretchable 5 - 5.2 mm; plain; snap-on type; red
www.wago.com/2009-115
/000-005
Item no.: 2009-115/000-006
WMB-Inline; for Smart Printer; 1500 pieces on roll; stretchable 5 - 5.2 mm; plain; snap-on type; blue
www.wago.com/2009-115
/000-006
Item no.: 2009-115/000-007
WMB-Inline; for Smart Printer; 1500 pieces on roll; stretchable 5 - 5.2 mm; plain; snap-on type; gray
www.wago.com/2009-115
/000-007
Item no.: 2009-115/000-012 www.wago.com/2009-115
Data sheet| Item number:2002-1611
www.wago.com/2002-1611
Subject to changes. Please also observe the further product documentation!
WAGO Kontakttechnik GmbH & Co. KG
Hansastr. 27
32423 Minden
Phone: +49571 887-0 | Fax: +49571 887-169
Email: info.de@wago.com | Web: www.wago.com
Do you have any questions about our products?
We are always happy to take your call at +49 (571) 887-44222.
16.03.2021Page /7 18
Item no.: 2009-115/000-012
WMB-Inline; for Smart Printer; 1500 pieces on roll; stretchable 5 - 5.2 mm; plain; snap-on type; orange
www.wago.com/2009-115
/000-012
Item no.: 2009-115/000-017
WMB-Inline; for Smart Printer; 1500 pieces on roll; stretchable 5 - 5.2 mm; plain; snap-on type; light
green
www.wago.com/2009-115
/000-017
Item no.: 2009-115/000-023
WMB-Inline; for Smart Printer; 1500 pieces on roll; stretchable 5 - 5.2 mm; plain; snap-on type; green
www.wago.com/2009-115
/000-023
Item no.: 2009-115/000-024
WMB-Inline; for Smart Printer; 1500 pieces on roll; stretchable 5 - 5.2 mm; plain; snap-on type; violet
www.wago.com/2009-115
/000-024
Item no.: 2009-145
Mini-WSB Inline; for Smart Printer; 1700 pieces on roll; stretchable 5 - 5.2 mm; plain; snap-on type; white www.wago.com/2009-145
Item no.: 2009-145/000-002
Mini-WSB Inline; for Smart Printer; 1700 pieces on roll; stretchable 5 - 5.2 mm; plain; snap-on type;
yellow
www.wago.com/2009-145
/000-002
Item no.: 2009-145/000-005
Mini-WSB Inline; for Smart Printer; 1700 pieces on roll; stretchable 5 - 5.2 mm; plain; snap-on type; red
www.wago.com/2009-145
/000-005
Item no.: 2009-145/000-006
Mini-WSB Inline; for Smart Printer; 1700 pieces on roll; stretchable 5 - 5.2 mm; plain; snap-on type; blue
www.wago.com/2009-145
/000-006
Item no.: 2009-145/000-007
Mini-WSB Inline; for Smart Printer; 1700 pieces on roll; stretchable 5 - 5.2 mm; plain; snap-on type; gray
www.wago.com/2009-145
/000-007
Item no.: 2009-145/000-012
Mini-WSB Inline; for Smart Printer; 1700 pieces on roll; stretchable 5 - 5.2 mm; plain; snap-on type;
orange
www.wago.com/2009-145
/000-012
Item no.: 2009-145/000-023
Mini-WSB Inline; for Smart Printer; 1700 pieces on roll; stretchable 5 - 5.2 mm; plain; snap-on type;
green
www.wago.com/2009-145
/000-023
Item no.: 2009-145/000-024
Mini-WSB Inline; for Smart Printer; 1700 pieces on roll; stretchable 5 - 5.2 mm; plain; snap-on type;
violet
www.wago.com/2009-145
/000-024
Item no.: 248-501
Miniature WSB Quick marking system; plain; Marker width 5 mm; 10 strips with 10 markers per card www.wago.com/248-501
Item no.: 248-501/000-002
Mini-WSB marking card; as card; not stretchable; plain; snap-on type; yellow
www.wago.com/248-501
/000-002
Item no.: 248-501/000-005 www.wago.com/248-501
Data sheet| Item number:2002-1611
www.wago.com/2002-1611
Subject to changes. Please also observe the further product documentation!
WAGO Kontakttechnik GmbH & Co. KG
Hansastr. 27
32423 Minden
Phone: +49571 887-0 | Fax: +49571 887-169
Email: info.de@wago.com | Web: www.wago.com
Do you have any questions about our products?
We are always happy to take your call at +49 (571) 887-44222.
16.03.2021Page /8 18
Item no.: 248-501/000-005
Mini-WSB marking card; as card; not stretchable; plain; snap-on type; red
www.wago.com/248-501
/000-005
Item no.: 248-501/000-006
Mini-WSB marking card; as card; not stretchable; plain; snap-on type; blue
www.wago.com/248-501
/000-006
Item no.: 248-501/000-007
Mini-WSB marking card; as card; not stretchable; plain; snap-on type; gray
www.wago.com/248-501
/000-007
Item no.: 248-501/000-012
Mini-WSB marking card; as card; not stretchable; plain; snap-on type; orange
www.wago.com/248-501
/000-012
Item no.: 248-501/000-017
Mini-WSB marking card; as card; not stretchable; plain; snap-on type; light green
www.wago.com/248-501
/000-017
Item no.: 248-501/000-023
Mini-WSB marking card; as card; not stretchable; plain; snap-on type; green
www.wago.com/248-501
/000-023
Item no.: 248-501/000-024
Mini-WSB marking card; as card; not stretchable; plain; snap-on type; violet
www.wago.com/248-501
/000-024
Item no.: 793-501
WMB marking card; as card; not stretchable; plain; snap-on type; white www.wago.com/793-501
Item no.: 793-501/000-002
WMB marking card; as card; not stretchable; plain; snap-on type; yellow
www.wago.com/793-501
/000-002
Item no.: 793-501/000-005
WMB marking card; as card; not stretchable; plain; snap-on type; red
www.wago.com/793-501
/000-005
Item no.: 793-501/000-006
WMB marking card; as card; not stretchable; plain; snap-on type; blue
www.wago.com/793-501
/000-006
Item no.: 793-501/000-007
WMB marking card; as card; not stretchable; plain; snap-on type; gray
www.wago.com/793-501
/000-007
Item no.: 793-501/000-012
WMB marking card; as card; not stretchable; plain; snap-on type; orange
www.wago.com/793-501
/000-012
Item no.: 793-501/000-017
WMB marking card; as card; not stretchable; plain; snap-on type; light green
www.wago.com/793-501
/000-017
Data sheet| Item number:2002-1611
www.wago.com/2002-1611
Subject to changes. Please also observe the further product documentation!
WAGO Kontakttechnik GmbH & Co. KG
Hansastr. 27
32423 Minden
Phone: +49571 887-0 | Fax: +49571 887-169
Email: info.de@wago.com | Web: www.wago.com
Do you have any questions about our products?
We are always happy to take your call at +49 (571) 887-44222.
16.03.2021Page /9 18
Item no.: 793-501/000-023
WMB marking card; as card; not stretchable; plain; snap-on type; green
www.wago.com/793-501
/000-023
Item no.: 793-501/000-024
WMB marking card; as card; not stretchable; plain; snap-on type; violet
www.wago.com/793-501
/000-024
Item no.: 793-5501
WMB marking card; as card; for terminal block width 5 - 17.5 mm; stretchable 5 - 5.2 mm; plain; snap-on
type; white
www.wago.com/793-5501
Item no.: 793-5501/000-002
WMB marking card; as card; for terminal block width 5 - 17.5 mm; stretchable 5 - 5.2 mm; plain; snap-on
type; yellow
www.wago.com/793-5501
/000-002
Item no.: 793-5501/000-005
WMB marking card; as card; for terminal block width 5 - 17.5 mm; stretchable 5 - 5.2 mm; plain; snap-on
type; red
www.wago.com/793-5501
/000-005
Item no.: 793-5501/000-006
WMB marking card; as card; for terminal block width 5 - 17.5 mm; stretchable 5 - 5.2 mm; plain; snap-on
type; blue
www.wago.com/793-5501
/000-006
Item no.: 793-5501/000-007
WMB marking card; as card; for terminal block width 5 - 17.5 mm; stretchable 5 - 5.2 mm; plain; snap-on
type; gray
www.wago.com/793-5501
/000-007
Item no.: 793-5501/000-012
WMB marking card; as card; for terminal block width 5 - 17.5 mm; stretchable 5 - 5.2 mm; plain; snap-on
type; orange
www.wago.com/793-5501
/000-012
Item no.: 793-5501/000-014
WMB marking card; as card; for terminal block width 5 - 17.5 mm; stretchable 5 - 5.2 mm; plain; snap-on
type; brown
www.wago.com/793-5501
/000-014
Item no.: 793-5501/000-017
WMB marking card; as card; for terminal block width 5 - 17.5 mm; stretchable 5 - 5.2 mm; plain; snap-on
type; green
www.wago.com/793-5501
/000-017
Item no.: 793-5501/000-023
WMB marking card; as card; for terminal block width 5 - 17.5 mm; stretchable 5 - 5.2 mm; plain; snap-on
type; light green
www.wago.com/793-5501
/000-023
Item no.: 793-5501/000-024
WMB marking card; as card; for terminal block width 5 - 17.5 mm; stretchable 5 - 5.2 mm; plain; snap-on
type; violet
www.wago.com/793-5501
/000-024
Jumper
Item no.: 2004-402
Jumper; 2-way; insulated; light gray www.wago.com/2004-402
Item no.: 2004-403
Jumper; 3-way; insulated; light gray www.wago.com/2004-403
Data sheet| Item number:2002-1611
www.wago.com/2002-1611
Subject to changes. Please also observe the further product documentation!
WAGO Kontakttechnik GmbH & Co. KG
Hansastr. 27
32423 Minden
Phone: +49571 887-0 | Fax: +49571 887-169
Email: info.de@wago.com | Web: www.wago.com
Do you have any questions about our products?
We are always happy to take your call at +49 (571) 887-44222.
16.03.2021Page /10 18
Jumper; 3-way; insulated; light gray www.wago.com/2004-403
Item no.: 2004-404
Jumper; 4-way; insulated; light gray www.wago.com/2004-404
Item no.: 2004-405
Jumper; 5-way; insulated; light gray www.wago.com/2004-405
Item no.: 2004-405/011-000
Star point jumper; 3-way; insulated; light gray
www.wago.com/2004-405
/011-000
Item no.: 2004-406
Jumper; 6-way; insulated; light gray www.wago.com/2004-406
Item no.: 2004-406/020-000
Delta jumper; insulated; light gray
www.wago.com/2004-406
/020-000
Item no.: 2004-407
Jumper; 7-way; insulated; light gray www.wago.com/2004-407
Item no.: 2004-408
Jumper; 8-way; insulated; light gray www.wago.com/2004-408
Item no.: 2004-409
Jumper; 9-way; insulated; light gray www.wago.com/2004-409
Item no.: 2004-410
Jumper; 10-way; insulated; light gray www.wago.com/2004-410
Item no.: 2004-433
Jumper; from 1 to 3; insulated; light gray www.wago.com/2004-433
Item no.: 2004-434
Jumper; from 1 to 4; insulated; light gray www.wago.com/2004-434
Item no.: 2004-435
Jumper; from 1 to 5; insulated; light gray www.wago.com/2004-435
Item no.: 2004-436
Jumper; from 1 to 6; insulated; light gray www.wago.com/2004-436
Item no.: 2004-437
Jumper; from 1 to 7; insulated; light gray www.wago.com/2004-437
Item no.: 2004-438
Jumper; from 1 to 8; insulated; light gray www.wago.com/2004-438
Item no.: 2004-439
Jumper; from 1 to 9; insulated; light gray www.wago.com/2004-439
Item no.: 2004-440 www.wago.com/2004-440
Data sheet| Item number:2002-1611
www.wago.com/2002-1611
Subject to changes. Please also observe the further product documentation!
WAGO Kontakttechnik GmbH & Co. KG
Hansastr. 27
32423 Minden
Phone: +49571 887-0 | Fax: +49571 887-169
Email: info.de@wago.com | Web: www.wago.com
Do you have any questions about our products?
We are always happy to take your call at +49 (571) 887-44222.
16.03.2021Page /11 18
Item no.: 2004-440
Jumper; from 1 to 10; insulated; light gray
www.wago.com/2004-440
Item no.: 210-103
Wire commoning chain; insulated; black www.wago.com/210-103
Item no.: 210-123
Wire commoning chain; insulated; blue www.wago.com/210-123
Locking lever
Item no.: 210-254
Interlocking link; mechanically locks multiple links; 1 m long; transparent www.wago.com/210-254
check
Item no.: 210-136
Test plug; 2 mm Ø; with 500 mm cable; red www.wago.com/210-136
End plate
Item no.: 2002-991
End plate for fuse terminal blocks; 2 mm thick; gray www.wago.com/2002-991
Item no.: 2002-992
End plate for fuse terminal blocks; 2 mm thick; orange www.wago.com/2002-992
Item no.: 209-191
Separator for Ex e/Ex i applications; 3 mm thick; 120 mm wide; orange www.wago.com/209-191
Insulation stop
Item no.: 2002-171
Insulation stop; 0.25 - 0.5 mm²; 5 pieces/strip; light gray www.wago.com/2002-171
Item no.: 2002-172
Insulation stop; 0.75 - 1 mm²; 5 pieces/strip; dark gray www.wago.com/2002-172
ferrule
Item no.: 216-241
Ferrule; Sleeve for 0.5 mm² / 20 AWG; insulated; electro-tin plated; electrolytic copper; gastight
crimped; acc. to DIN 46228, Part 4/09.90; white
www.wago.com/216-241
Item no.: 216-242
Ferrule; Sleeve for 0.75 mm² / 18 AWG; insulated; electro-tin plated; electrolytic copper; gastight
crimped; acc. to DIN 46228, Part 4/09.90; gray
www.wago.com/216-242
Item no.: 216-243
Ferrule; Sleeve for 1 mm² / AWG 18; insulated; electro-tin plated; electrolytic copper; gastight crimped;
acc. to DIN 46228, Part 4/09.90; red
www.wago.com/216-243
Item no.: 216-244
Ferrule; Sleeve for 1.5 mm² / AWG 16; insulated; electro-tin plated; electrolytic copper; gastight
crimped; acc. to DIN 46228, Part 4/09.90; black
www.wago.com/216-244
Item no.: 216-246
Ferrule; Sleeve for 2.5 mm² / AWG 14; insulated; electro-tin plated; electrolytic copper; gastight
crimped; acc. to DIN 46228, Part 4/09.90; blue
www.wago.com/216-246
Item no.: 216-262
Ferrule; Sleeve for 0.75 mm² / 18 AWG; insulated; electro-tin plated; electrolytic copper; gastight www.wago.com/216-262
Data sheet| Item number:2002-1611
www.wago.com/2002-1611
Subject to changes. Please also observe the further product documentation!
WAGO Kontakttechnik GmbH & Co. KG
Hansastr. 27
32423 Minden
Phone: +49571 887-0 | Fax: +49571 887-169
Email: info.de@wago.com | Web: www.wago.com
Do you have any questions about our products?
We are always happy to take your call at +49 (571) 887-44222.
16.03.2021Page /12 18
Ferrule; Sleeve for 0.75 mm² / 18 AWG; insulated; electro-tin plated; electrolytic copper; gastight
crimped; acc. to DIN 46228, Part 4/09.90; gray
www.wago.com/216-262
Item no.: 216-263
Ferrule; Sleeve for 1 mm² / AWG 18; insulated; electro-tin plated; electrolytic copper; gastight crimped;
acc. to DIN 46228, Part 4/09.90; red
www.wago.com/216-263
Item no.: 216-264
Ferrule; Sleeve for 1.5 mm² / AWG 16; insulated; electro-tin plated; electrolytic copper; gastight
crimped; acc. to DIN 46228, Part 4/09.90; black
www.wago.com/216-264
Item no.: 216-266
Ferrule; Sleeve for 2.5 mm² / AWG 14; insulated; electro-tin plated; electrolytic copper; gastight
crimped; acc. to DIN 46228, Part 4/09.90; blue
www.wago.com/216-266
tools
Item no.: 210-658
Operating tool; Blade: 3.5 x 0.5 mm; with a partially insulated shaft; angled; short; multicoloured www.wago.com/210-658
Item no.: 210-720
Operating tool; Blade: 3.5 x 0.5 mm; with a partially insulated shaft; multicoloured www.wago.com/210-720
Protective Warning Marker
Item no.: 2002-115
Protective warning marker; with high-voltage symbol, black; for 5 terminal blocks; yellow www.wago.com/2002-115
Downloads
Documentation
Bid Text
2002-1611
docx - Datei
2019 Apr 23 docx
15.7 kB
Download
2002-1611
X81 - Datei
2019 Apr 29 xml
4.2 kB
Download
Additional Information
Technical explanations 2019 Apr 3 pdf
2.2 MB
Download
CAD/CAE-Data
CAD data
2D/3D Models 2002-1611 URL Download
CAE data
EPLAN Data Portal 2002-1611 URL Download
Data sheet| Item number:2002-1611
www.wago.com/2002-1611
Subject to changes. Please also observe the further product documentation!
WAGO Kontakttechnik GmbH & Co. KG
Hansastr. 27
32423 Minden
Phone: +49571 887-0 | Fax: +49571 887-169
Email: info.de@wago.com | Web: www.wago.com
Do you have any questions about our products?
We are always happy to take your call at +49 (571) 887-44222.
16.03.2021Page /13 18
Conductor termination
Inserting a conductor via push-in
termination:
Solid conductors with cross-sections from
either one size above, or up to two sizes
below, the rated cross-section can be simply
pushed in – no tools needed.
Push-in termination of solid and ferruled
conductors
All conductor types at a glance
EPLAN Data Portal 2002-1611 URL Download
WSCAD Universe 2002-1611 URL Download
ZUKEN Portal 2002-1611 URL Download
Environmental Product Compliance
Compliance Search
Environmental Product Compliance 2002-1611
2-conductor fuse terminal block; with pivoting fuse holder; and end plate; for 5 x 20
mm miniature metric fuse; without blown fuse indication; for DIN-rail 35 x 15 and 35 x
7.5; 2.5 mm²; Push-in CAGE CLAMP®; 2,50 mm²; gray
URL Download
Installation Notes
Data sheet| Item number:2002-1611
www.wago.com/2002-1611
Subject to changes. Please also observe the further product documentation!
WAGO Kontakttechnik GmbH & Co. KG
Hansastr. 27
32423 Minden
Phone: +49571 887-0 | Fax: +49571 887-169
Email: info.de@wago.com | Web: www.wago.com
Do you have any questions about our products?
We are always happy to take your call at +49 (571) 887-44222.
16.03.2021Page /14 18
Commoning
Conductor termination – insulation stop
Inserting a conductor via operating tool:
Connecting fine-stranded conductors
without ferrules, or small cross-sectional
conductors that cannot be pushed in, is
performed similarly to the original CAGE
CLAMP® – just use an operating tool.
Advantage:
To open the clamp, the operating tool is
inserted vertically. The conductor entry is
less than 15 degrees for easier wiring.
Data sheet| Item number:2002-1611
www.wago.com/2002-1611
Subject to changes. Please also observe the further product documentation!
WAGO Kontakttechnik GmbH & Co. KG
Hansastr. 27
32423 Minden
Phone: +49571 887-0 | Fax: +49571 887-169
Email: info.de@wago.com | Web: www.wago.com
Do you have any questions about our products?
We are always happy to take your call at +49 (571) 887-44222.
16.03.2021Page /15 18
Fuse terminal blocks with a width of 6.2 mm
/0.244 in can be assembled adjacently. If
there is no adjacent fuse terminal block at
the end of the assembly, an end plate must
be used.
Removing a push-in type jumper bar:
Insert the operating tool between the jumper
and partition wall of the dual jumper slots,
then lift up the jumper.
Place the operating tool in the center of
jumpers for up to five contacts (see above),
or alternately on both sides for jumpers with
more than five contacts.
The push-in type jumper bar system is based
on the common plug and socket principle.
Each terminal block is spring-loaded with a
double socket and a resilient CrNi steel
spring. The jumper contact material is pure
electrolytic copper, which allows for an
extremely small design capable of carrying
the full-rated current of the terminal block.
Ground terminal blocks can also be
commoned using the same jumper system.
Custom jumpers are created by breaking
and removing jumper contacts (2000, 2001,
2002, 2004 Series).
Data sheet| Item number:2002-1611
www.wago.com/2002-1611
Subject to changes. Please also observe the further product documentation!
WAGO Kontakttechnik GmbH & Co. KG
Hansastr. 27
32423 Minden
Phone: +49571 887-0 | Fax: +49571 887-169
Email: info.de@wago.com | Web: www.wago.com
Do you have any questions about our products?
We are always happy to take your call at +49 (571) 887-44222.
16.03.2021Page /16 18
When selecting glass cartridge fuses, make
sure that the maximum power loss listed
below is not exceeded. The power loss is
determined according to IEC or EN60947-7-
3/VDE 0611-6 at 23°C. The temperature rise
of the terminal block must be checked
according to their application and mounting.
Higher ambient temperatures represent an
additional impact on miniature fuses.
Therefore, in such applications, the rated
current must be reduced if necessary. More
details are available from the manufacturers.
Fused disconnect terminal block with a
pivoting fuse holder
Fuse replacement
Fused Disconnect Terminal Block with a
Pivoting Fuse Holder
Pivot the fuse holder into the locked open
position.
Data sheet| Item number:2002-1611
www.wago.com/2002-1611
Subject to changes. Please also observe the further product documentation!
WAGO Kontakttechnik GmbH & Co. KG
Hansastr. 27
32423 Minden
Phone: +49571 887-0 | Fax: +49571 887-169
Email: info.de@wago.com | Web: www.wago.com
Do you have any questions about our products?
We are always happy to take your call at +49 (571) 887-44222.
16.03.2021Page /17 18
Application Notes on Terminal Blocks for
Glass Cartridge Fuses
Nominal current ratings for fuse cartridges
are defined differently in international
standards. This is why the recommended
continuous current-carrying capacity of the
fuses is a max. 80% of their nominal current
according to DIN72581/Part 3 (for a
surrounding air temperature of 23°C).
Selecting the correct fuse cartridge is
important for product safety within
applications, as well as for fuse cartridge
service life and reliability. Fuse cartridges will
only operate perfectly as protection
components (break-off point) if they are
properly selected and used as intended (i.e.,
according to the state of the technology and
valid specifications, as well as data sheet
characteristics), according to basic safety
requirements (i.e., persons, animals and
property must be protected against hazards).
Application Notes on Terminal Blocks for
Glass Cartridge Fuses
Diagram: “Block Arrangement”
Application Notes on Terminal Blocks for
Glass Cartridge Fuses
Diagram: “Individual Arrangement”
Data sheet| Item number:2002-1611
www.wago.com/2002-1611
Subject to changes. Please also observe the further product documentation!
WAGO Kontakttechnik GmbH & Co. KG
Hansastr. 27
32423 Minden
Phone: +49571 887-0 | Fax: +49571 887-169
Email: info.de@wago.com | Web: www.wago.com
Do you have any questions about our products?
We are always happy to take your call at +49 (571) 887-44222.
16.03.2021Page /18 18
Marking
Snapping WMB Inline markers into marker
slots.
Concerning product safety, fuse cartridges
must generally be tested under both normal
and faulty operating conditions within your
application.
Product family
TOPJOB® S
TOPJOB®S: In various industrial applications and modern building installations, WAGO's wide and versatile range of rail-
mount terminal blocks provides more than just reliable electrical connections.
Show all products from the family