Customer Service Center - Call toll-free from: U.S.A., Canada and Mexico 1-800-255-1479
Specifications
Channel Range: 7-13, one 6 MHz channel
(174-216 MHz)
VSWR: 1.05 Visual +0.5 MHz 1.08 Color
Sub-Carrier 1.10 Remainder of Channel
Deicing: Fiberglass Radome Enclosed
Input Power: 100 kW, Peak Visual +20% Aural
Input Type: Specify 50 or 75 ohm 6-1/8" EIA
Antenna Selection
Antennas are selected on the basis of:
Azimuth Pattern
Elevation gain 6, 9, 12 or 16 are typical
Beam tilt 0.75, 1.0 or 1.5° are typical
Horizontal, elliptical or circular polarization
Top or side mount
Standard Type Numbers are listed in the table. Specify
channel number and, for elliptically/circularly polarized
antennas, the desired power split. Other patterns, gains
and beam tilts are available on request.
Top-Mounted Antennas
Azimuth Pattern Peak Power Standard
Relative Field Pol. Gain Type No.
Omnidirectional ±1 dB
Horiz. 6.00 (7.78 dBd) ATW6V3-HTO- (*)
Ellipt. ** ATW6V3-ETO- (*)
Horiz. 9.00 (9.54 dBd) ATW9V3-HTO- (*)
Ellipt. ** ATW9V3-ETO- (*)
Horiz. 12.00 (10.79 dBd) ATW12V3-HTO- (*)
Ellipt. ** ATW12V3-ETO- (*)
Horiz. 16.00 (12.04 dBd) ATW16V3-HTO- (*)
Ellipt. ** ATW16V3-ETO- (*)
Directivity: 1.00 (0.00 dB)
Skull
Horiz. 11.40 (10.57 dBd) ATW6V3-HTS-(*)
Ellipt. ** ATW6V3-ETS-(*)
Horiz. 17.10 (12.33 dBd) ATW9V3-HTS-(*)
Ellipt. ** ATW9V3-ETS-(*)
Horiz. 22.80 (13.58 dBd) ATW12V3-HTS-(*)
Ellipt. ** ATW12V3-ETS-(*)
Horiz. 30.40 (14.83 dBd) ATW16V3-HTS-(*)
Ellipt. ** ATW16V3-ETS-(*)
Directivity: 1.90 (2.79 dB)
* Specify VHF-TV channel number.
** Horizontal and vertical gains depend on power split. Specify power split.
30°
90°
120°
150°
210°
240°
300°
330°
60°
270°
0
180°
0.8
0.6
0.4
0.2
1.0
Relative Field
30°
90°
120°
150°
210°
240°
300°
330°
60°
270°
0
180°
0.8
0.6
0.4
0.2
1.0
Relative Field
TRASAR®VHF-TV Transmitting Antennas
Azimuth Patterns
As shown in the table, omnidirectional and skull patterns
are standard. Cardioid patterns are also available.
Note that these are typical free space patterns and may
vary slightly depending on channel, structural design
criteria and tower mounting configuration.
286