1PS7032I 06/26/09
Truth Table
EN IN ON Switch
00
S1A, S1B, S1C, S1D
01
S2A, S2B, S2C, S2D
1 X Disabled
Features
• High-performance solution to switch between video sources
• Wide bandwidth: 570 MHz (typical)
• Low On-Resistance: 5Ω (typical)
• Low crosstalk at 10 MHz: –80dB
• Ultra-low quiescent power (0.1μA typical)
• Single supply operation: +5.0V
• Fast switching: 10ns
• ESD > 5KV HBM, 10KV I/O to GND
• Packaging (Pb-free & Green Available):
– 16-pin 150-mil wide plastic SOIC (W)
– 16-pin 150-mil wide plastic QSOP (Q)
PI5V330S
Low On-Resistance Wideband/Video
Quad 2-Channel Mux/DeMux
Block Diagram
Description
Pericom Semiconductor’s PI5V330S is a true bi di rec tion al Quad
2-channel multiplexer/demultiplexer rec om mend ed for both RGB
and com pos ite video switching applications. The video switch
can be driven from a current output RAMDAC or voltage output
com pos ite video source.
Low On-Resistance and wide bandwidth make it ideal for video
and other applications. Also this device has ex cep tion al ly high
current capability which is far greater than most analog switches
offered today. A single 5V supply is all that is required for operation.
The PI5V330S offers a high-performance, low-cost so lu tion to
switch between video sources. The application section de scribes the
PI5V330S replacing the HC4053 multiplier and buffer/amplifi er.
Pin Confi guration
Pin Description
Pin Name Description
S1A, S1B, S1C, S1D
S2A, S2B, S2C, S2DAnalog Video I/O
IN Select Input
EN Enable
DA, DB
DC, DDAnalog Video I/O
GND Ground
VDD Power
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
VDD
EN
S1D
S2D
DD
S1C
S2C
DC
IN
S1A
S2A
DA
S1B
S2B
DB
GND
S1A
S2A
S1B
S2B
S1C
S2C
S1D
S2D
DA
DB
DC
DD
EN IN
DECODER/DRIVERS
09-0124
2PS7032I 06/26/09
PI5V330S
Low On-Resistance Wideband/Video
Quad 2-Channel Mux/DeMux
Storage Temperature ..........................................................–65°C to +150°C
Ambient Temperature with Power Applied .........................–40°C to +85°C
Supply Voltage to Ground Potential (Inputs & VDD Only) ..–0.5V to +7.0V
Supply Voltage to Ground Potential (Outputs & D/O Only) –0.5V to +7.0V
DC Input Voltage ..................................................................–0.5V to +7.0V
DC Output Current .............................................................................120mA
Power Dissipation .................................................................................0.5W
Note:
Stresses greater than those listed under MAX I MUM RAT-
INGS may cause permanent damage to the de vice. This is
a stress rating only and func tion al op er a tion of the device
at these or any other conditions above those indicated in the
operational sections of this specifi cation is not implied. Ex-
posure to absolute maximum rating conditions for extended
periods may affect reliability.
Notes:
1. For Max. or Min. conditions, use appropriate value specifi ed under Electrical Characteristics for the applicable device type.
2. Typical values are at VDD = 5.0V, TA = 25°C ambient and maximum loading.
3. Measured by the voltage drop between S1, S2, and D I/O pins at indicated current through the switch. On-Resistance is de ter mined by the
lower of the voltages on the S1, S2, and D I/O pins.
Maximum Ratings
(Above which the useful life may be impaired. For user guidelines, not tested.)
DC Electrical Characteristics (Over the Operating Range, TA = –40°C to +85°C, VDD = 5V ±5%)
Parameters Description Test Conditions(1) Min. Typ.(2) Max. Units
V
ANALOG Analog Signal Range 0 2.0
VVIH Input HIGH Voltage Guaranteed Logic HIGH Level 2.0 -
VIL Input LOW Voltage Guaranteed Logic LOW Level –0.5 0.8
IIH Input HIGH Current VDD = Max., VIN = VDD ±1
μAIIL Input LOW Current VDD = Max., VIN = GND ±1
IOAnalog Output Leakage Current 0 ≤ S1, S2 or D ≤ VDD, Switch OFF ±1
VIK Clamp Diode Voltage VDD = Min., IIN = -18mA -0.7 -1.2 V
VHInput Hysteresis at Control Pins 150 - mV
RON Switch On-Resistance(3)
VDD = Min., VIN = 1.0V,
ION = 13mA 57
Ω
VDD = Min., VIN = 2.0V,
ION = 26mA 710
09-0124
3PS7032I 06/26/09
PI5V330S
Low On-Resistance Wideband/Video
Quad 2-Channel Mux/DeMux
Power Supply Characteristics
Parameters Description Test Conditions(1) Min. Typ(2) Max. Units
ICC Quiescent Power
Supply Current VDD = Max. IN = GND or VDD 0.1 3.0 μA
∆ICC Supply Current per Input
@ TTL HIGH VDD = Max. IN = 3.4V(3) 2.5 mA
ICCD Supply Current per Input
per MHz(4)
VDD = Max., S1, S2 and D
Pins Open EN = GND
Control Input Toggling
50% Duty Cycle
0.25 mA/
MHz
Notes:
1. For Max. or Min. conditions, use appropriate value specifi ed under Electrical Characteristics for the applicable device.
2. Typical values are at VDD = 5.0V, +25°C ambient.
3. Per TTL driven input (VIN = 3.4V, control inputs only); S1, S2, and D pins do not contribute to ICC.
4. This current applies to the control inputs only and represent the current required to switch internal capacitance at the specifi ed frequency. The
S1, S2, and D I/O pins generate no signifi cant AC or DC currents as they transition. This parameter is not tested, but is guar an teed by design.
Notes:
1. This parameter is determined by device characterization but is not production tested.
Dynamic Characteristics (Over the Operating Range, TA = –40°C to +85°C, VDD = 5V ±5%)
Parameters Description Test Conditions Min. Typ. Max. Unit
tON Turn On Time RL = 75Ω, CL = 20PF, See Fig. 4 2.5 5 ns
tOFF Turn Off Time RL = 75Ω, CL = 20PF, See Fig. 4 1.1 5
BW(1) -3 dB Bandwidth See Fig. 5 570 MHz
XTALK Crosstalk 10MHz, See Fig. 5, CL = 0pF -80 dB
CIN(1) Input/Enable Capacitance VIN = 0V, f = 1 MHz 6
pF
COFF(1) Capacitance, Switch Off VIN = 0V, f = 1 MHz 6
CON(1) Capacitance, Switch On VIN = 0V, f = 1 MHz 9
OIRR Off Isolation 10MHz, See Fig 5, CL = 0pF -48 dB
09-0124
4PS7032I 06/26/09
PI5V330S
Low On-Resistance Wideband/Video
Quad 2-Channel Mux/DeMux
Defi nitions
Symbol Description
RON Resistance between source and drain with switch in the ON state.
IOOutput leakage current measured at S1, S2, and D with the switch OFF.
VIN Digital voltage at the IN pin that selects between S1 and S2 analog inputs.
VEN A voltage that ENABLES the chip.
CIN Capacitance at the digital inputs.
COFF Capacitance at analog I/O (S1, S2, D) with switch OFF.
CON Capacitance at analog I/O (S1, S2, D) with switch ON.
VIH Minimum input voltage for logic HIGH.
VIL Minimum input voltage for logic LOW.
IIH (IIL) Input current of the digital input.
tON
Propagation delay measured between 50% of the digital input to 90% of the analog output when switch is
turned ON. The peak analog voltage is 0.714V.
tOFF Propagation delay measured between 50% of the digital input to 90% of the analog output when switch is
turned OFF. The peak analog voltage is 0.714V.
BWFrequency response of the switch in the ON state measured at 3dB down.
XTALK
Is an unwanted signal coupled from channel to channel. Measured in –dB. XTALK = 20 LOG VOUT/VIN. This is
non-adjacent crosstalk.
OIRR Off isolation is the resistance (measured in –dB) between the input and output with the switch off (NO).
09-0124
5PS7032I 06/26/09
PI5V330S
Low On-Resistance Wideband/Video
Quad 2-Channel Mux/DeMux
Figure 1. Gain vs Frequency
Figure 2. Off Isolation vs Frequency
09-0124
6PS7032I 06/26/09
PI5V330S
Low On-Resistance Wideband/Video
Quad 2-Channel Mux/DeMux
Figure 3. Crosstalk vs Frequency
Figure 4. Switching Time
tON
tOFF
90%
90%
50%
Analog
Output
Digital
Input
50%
75Ω
GND EN
IN
3V S D
+5.0V
V
DD
V
OUT
20pF
Figure 5. Gain/Phase, Crosstalk, Off-Isolation
PI5V330S
T1 R1
S1
HP11667A
HP4396B
09-0124
7PS7032I 06/26/09
PI5V330S
Low On-Resistance Wideband/Video
Quad 2-Channel Mux/DeMux
Packaging Mechanical: 16-pin SOIC (W)
1
SEATING PLANE
.050
BSC
1
16
0-8˚
.149
.157
X.XX
X.XX DENOTES DIMENSIONS
IN MILLIMETERS
3.78
3.99
.386
.393
9.80
10.00
1.27
.053
.068 1.35
1.75
.2284
.2440
5.80
6.20
.0040
.0098 0.10
0.25
.013
.020
.0155
.0260
0.330
0.508
0.393
0.660
.0075
.0098
0.25
0.50
.0099
.0196 x 45˚
0.19
0.25
.016
.050
0.41
1.27
REF
DESCRIPTION: 16-Pin, 150-Mil Wide, SOIC
PACKAGE CODE: W
DOCUMENT CONTROL NO.
PD - 1004
REVISION: E
DATE: 03/09/05
Notes:
1) Controlling dimensions in millimeters.
2) Ref: JEDEC MS-012D/AC
Pericom Semiconductor Corporation
3545 N. 1st Street, San Jose, CA 95134
1-800-435-2335 • www.pericom.com
09-0124
8PS7032I 06/26/09
PI5V330S
Low On-Resistance Wideband/Video
Quad 2-Channel Mux/DeMux
Packaging Mechanical: 16-pin QSOP (Q)
1
.189
.197
.053
.069
.004
.010
SEATING
PLANE
.025
BSC
.007
.010
.228
.244
1
16
.150
.157
X.XX
X.XX DENOTES DIMENSIONS IN MILLIMETERS
0.635
4.80
5.00
1.35
1.75
5.79
6.19
0.101
0.254
.008
.012
0.203
0.305
3.81
3.99
0.178
0.254
0.38
.008
0.203
.015 x 45°
REF
Detail A
Detail A
.008
0.20
MIN.
Guage Plane
.010
0.254
.041
1.04
REF
.016
.035
0.41
0.89
0˚-6˚
.008
.013
0.20
0.33
DESCRIPTION: 16-Pin 150-Mil Wide QSOP
PACKAGE CODE: Q
DOCUMENT CONTROL NO.
PD - 1201
REVISION: G
DATE: 11/07/07
Note:
1) Controlling dimensions in inches.
2) Ref: JEDEC MO-137B/AB.
3) Dimensions do not include mold flash, protrusions or gate burrs
Pericom Semiconductor Corporation
3545 N. 1st Street, San Jose, CA 95134
1-800-435-2335 • www.pericom.com
Ordering Information
Ordering Code Package Code Package Description
PI5V330SWE W Pb-free & Green, 16-pin 150-mil wide plastic SOIC
PI5V330SQE Q Pb-free & Green, 16-pin 150-mil wide plastic QSOP
Notes:
1. Thermal characteristics can be found on the company web site at www.pericom.com/packaging/
2. E = Pb-free and Green
3. Adding an X suffi x = Tape/Reel
Pericom Semiconductor Corporation • 1-800-435-2336 • www.pericom.com
09-0124
