RSpecification Control
Drawing
EPD-RWC-15673
8 conductor cable
Issue C - 7/12/2011
Identification, colors & marks Cross section
A
9/96
B
9/96/93
B
9/96/93
Components
ID Quantity Part number Description
A 1 55A3121-22 Twisted pair, shielded, unjacketed.
B 2 55A3131-22 Twisted trio, shielded, unjacketed.
Cable
Outer Description Thickness OD
Inches mm Inches mm
Core 0.232 5.90
Wrap Polyester tape .001" 0.002 0.05 0.236 6.00
Jacket Raythane FR black 0.022 0.56 0.280 7.12
Cable OD tolerance + 0.014 + 0.36
Specification Raychem WCD 3310
Weight 45.86 lb/kft 68.38 Kg/Km
Page 1 of 2
This specification sheet takes precedence over documents referenced herein.
Referenced documents shall be of the issue in effect on date of invitation to bid.
Proposed specification control drawings may be altered prior to final issue.
RCD Version 1.2 Level 1 Ser #5 RWC 8/7/95
Tyco Electronics Corporation
Raychem Wire and Cable
501 Oakside Avenue
Redwood City, CA 94063-3800
1-800-227-8816
© 2011 Tyco Electronics Corporation. All rights reserved.
RSpecification Control
Drawing
EPD-RWC-15673
8 conductor cable
Issue C - 7/12/2011
Continued
Physical properties
Component Sequence The placing of the components in the cross sectional view of the cable is for
reference only and is not a requirement
Notes
Colors Color code designators shall be in accordance with MIL-STD-681.
Dimensions Dimensions are in inches, and unless otherwise designated, are nominal.
Export License Note The information contained on this drawing may be subject to International Traffic in
Arms Regulations (ITAR) or Export Administration Regulations (EAR) controls and
may not be disclosed to any foreign person or firm, including foreign persons
employed by or associated with your firm, without first complying with all
requirements for obtaining an export license if applicable.
Identification, Colors & Marks The following is the key to the descriptions in the left hand view of the cable on
Page 1.
Line 1: Identifies the component per the components' ID list.
Line 2: Color codes.
Line 3: Mark on component "-" mark on component jacket.
Minimum length Cable will be supplied in 50 ft. minimum lengths unless otherwise specified
Part Number Note Other codes and suffixes may be added to the Part Number as necessary, to
capture any additional requirements imposed by the purchase order
Specification Information This drawing is the property of Tyco Electronics Corporation and may not be used
for any purpose other than for that which it is supplied without the express written
authority of Tyco Electronics Corporation.
Trademarks Raychem, Raythane, TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks.
Page 2 of 2
This specification sheet takes precedence over documents referenced herein.
Referenced documents shall be of the issue in effect on date of invitation to bid.
Proposed specification control drawings may be altered prior to final issue.
RCD Version 1.2 Level 1 Ser #5 RWC 8/7/95
Tyco Electronics Corporation
Raychem Wire and Cable
501 Oakside Avenue
Redwood City, CA 94063-3800
1-800-227-8816