MMBZ9V1ALFHT116 - ROHM SEMICONDUCTOR

MMBZ9V1ALFH

　Transient Voltage Suppressor (AEC-Q101 qualified) Data sheet

　　 ●Outline

VRWM 6.0 V　　

PPP 24 W　

IPP 1.7 A　

●Feature ●Inner Circuit

High reliability

Small mold type

●Application ●Packaging Specification

ESD Protection Packing Embossed Tape

Reel Size(mm) 180

Taping Width(mm) 8

Quantity(pcs) 3000

●Structure Taping Code T116

Silicon Epitaxial Planar 　Marking D0S

●Absolute Maximum Rating (Ta = 25℃)

Parameter Symbol Conditions Min. Max. Unit

Peak Pulse Power

PPP1 tp＝10/1000us - 24 W

MMBZ5V6AL ～MMBZV10AL

PPP2 tp＝10/1000us - 40 W

MMBZ12VAL ～MMBZV33AL

Junction temperature Tj- - 150 ℃

Storage temperature Tstg - -65 150 ℃

Power dissipation

PD1 On Glasss-epoxy substrate - 225 mW

PD2 On Alumina substrate - 300 mW

ESD capability* V

ESD

IEC61000-4-2 Air - 30 kV

Contact - 30 kV

Machine model - 2 kV

Human body model - 8 kV

MIL-STD-883 level3

CDM （Charged device model) - 500 V

*IEC61000-4-2 C=150pF R=330Ω

Machine model C=200pF R=0Ω

　　　　　　　　　　　　　　　　　　　　　　　　　 Human body model C=100pF R=1.5kΩ

www.rohm.com

Not Recommended for

New Designs

MMBZ9V1ALFH 　　　　　　　　　　　　　　　　　　　　　　 Data sheet

●Characteristic (Ta = 25ºC) 　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　

P/N

Symbol

Breakdown voltage ：VB R (V) Reverse Current：

IR(μA)

Forward voltage：

VF(V)

Reverse Stand-off

voltage

VRW M(V)

MIN. Nom. MAX. It(mA) MAX. VR(V) MAX. IF(mA) MAX.

MMBZ5V6AL 5.32 5.60 5.88 20 5 3.0 0.9 10 3.0

MMBZ6V2AL 5.89 6.20 6.51 1 0.2 3.0 0.9 10 3.0

MMBZ6V8AL 6.46 6.80 7.14 1 0.3 4.5 0.9 10 4.5

MMBZ9V1AL 8.65 9.10 9.56 1 0.1 6.0 0.9 10 6.0

MMBZ10VAL 9.50 10.00 10.50 1 0.02 6.5 0.9 10 6.5

MMBZ12VAL 11.40 12.00 12.60 1 0.005 8.5 0.9 10 8.5

MMBZ15VAL 14.25 15.00 15.75 1 0.005 12.0 0.9 10 12.0

MMBZ16VAL 15.20 16.00 16.80 1 0.005 13.0 0.9 10 13.0

MMBZ18VAL 17.10 18.00 18.90 1 0.005 14.5 0.9 10 14.5

MMBZ20VAL 19.00 20.00 21.00 1 0.005 17.0 0.9 10 17.0

MMBZ24VAL 22.80 24.00 25.20 1 0.005 20.0 0.9 10 20.0

MMBZ27VAL 25.65 27.00 28.35 1 0.005 22.0 0.9 10 22.0

MMBZ30VAL 28.50 30.00 31.50 1 0.005 24.0 0.9 10 24.0

MMBZ33VAL 31.35 33.00 34.65 1 0.005 26.0 0.9 10 26.0

Breakdown voltage (V

BR) is measured by applying current with 40ms pulse.

P/N

Symbol

Peak pluse current：

Ipp(A) 10/1000us

Clamping voltage：

Vcl(V)

Capacitance between

terminals：

Ct(pF)

MAX. MAX. Ipp(A) TYP. VR(V)

MMBZ5V6AL 3.00 8.0 3.00 230 0

MMBZ6V2AL 2.76 8.7 2.76 180 0

MMBZ6V8AL 2.50 9.6 2.50 165 0

MMBZ9V1AL 1.70 14.0 1.70 120 0

MMBZ10VAL 1.70 14.2 1.70 105 0

MMBZ12VAL 2.35 17 2.35 85 0

MMBZ15VAL 1.90 21 1.90 75 0

MMBZ16VAL 1.70 23 1.70 70 0

MMBZ18VAL 1.60 25 1.60 60 0

MMBZ20VAL 1.40 28 1.40 55 0

MMBZ24VAL 1.25 32 1.25 46 0

MMBZ27VAL 1.00 40 1.00 42 0

MMBZ30VAL 0.95 43 0.95 38 0

MMBZ33VAL 0.87 46 0.87 34 0

●Marking

形名 Marking 形名 Marking

MMBZ5V6AL D0M MMBZ16VAL D0Y

MMBZ6V2AL D0N MMBZ18VAL D0Z

MMBZ6V8AL D0P MMBZ20VAL D1A

MMBZ9V1AL D0S MMBZ24VAL D1C

MMBZ10VAL D0T MMBZ27VAL D1D

MMBZ12VAL D0V MMBZ30VAL D1E

MMBZ15VAL D0X MMBZ33VAL D1F

www.rohm.com

2019/06/19_Rev.002

Not Recommended for

New Designs

MMBZ9V1ALFH 　　　　　　　　　　　　　　　　　　　　　　 Data sheet

●Characteristic Curves

www.rohm.com

Not Recommended for

New Designs

MMBZ9V1ALFH 　　　　　　　　　　　　　　　　　　　　　　 Data sheet

●Characteristic Curves

www.rohm.com

2019/06/19_Rev.002

Not Recommended for

New Designs

MMBZ9V1ALFH 　　　　　　　　　　　　　　　　　　　　　　　　 Data sheet

●Dimensions (SOT-23 SSD3)

●Taping (Unit:mm)

www.rohm.com

Not Recommended for

New Designs

Notice-PAA-E Rev.004

Notice

Precaution on using ROHM Products

1. If you intend to use our Products in devices requiring extremely high reliability (such as medical equipment (Note 1),

aircraft/spacecraft, nuclear power controllers, etc.) and whose malfunction or failure may cause loss of human life,

bodily injury or serious damage to property (“Specific Applications”), please consult with the ROHM sales

representative in advance. Unless otherwise agreed in writing by ROHM in advance, ROHM shall not be in any way

responsible or liable for any damages, expenses or losses incurred by you or third parties arising from the use of any

ROHM’s Products for Specific Applications.

(Note1) Medical Equipment Classification of the Specific Applications

JAPAN

USA

CHINA

CLASSⅢ

CLASSⅡb

CLASSⅢ

CLASSⅣ

CLASSⅢ

2. ROHM designs and manufactures its Products subject to strict quality control system. However, semiconductor

products can fail or malfunction at a certain rate. Please be sure to implement, at your own responsibilities, adequate

safety measures including but not limited to fail-safe design against the physical injury, damage to any property, which

a failure or malfunction of our Products may cause. The following are examples of safety measures:

[a] Installation of protection circuits or other protective devices to improve system safety

[b] Installation of redundant circuits to reduce the impact of single or multiple circuit failure

3. Our Products are not designed under any special or extraordinary environments or conditions, as exemplified below.

Accordingly, ROHM shall not be in any way responsible or liable for any damages, expenses or losses arising from the

use of any ROHM’s Products under any special or extraordinary environments or conditions. If you intend to use our

Products under any special or extraordinary environments or conditions (as exemplified below), your independent

verification and confirmation of product performance, reliability, etc, prior to use, must be necessary:

[a] Use of our Products in any types of liquid, including water, oils, chemicals, and organic solvents

[b] Use of our Products outdoors or in places where the Products are exposed to direct sunlight or dust

[c] Use of our Products in places where the Products are exposed to sea wind or corrosive gases, including Cl2,

H2S, NH3, SO2, and NO2

[d] Use of our Products in places where the Products are exposed to static electricity or electromagnetic waves

[e] Use of our Products in proximity to heat-producing components, plastic cords, or other flammable items

[f] Sealing or coating our Products with resin or other coating materials

[g] Use of our Products without cleaning residue of flux (Exclude cases where no-clean type fluxes is used.

However, recommend sufficiently about the residue.); or Washing our Products by using water or water-soluble

cleaning agents for cleaning residue after soldering

[h] Use of the Products in places subject to dew condensation

4. The Products are not subject to radiation-proof design.

5. Please verify and confirm characteristics of the final or mounted products in using the Products.

6.In particular, if a transient load (a large amount of load applied in a short period of time, such as pulse, is applied,

confirmation of performance characteristics after on-board mounting is strongly recommended. Avoid applying power

exceeding normal rated power; exceeding the power rating under steady-state loading condition may negatively affect

product performance and reliability.

7.De-rate Power Dissipation depending on ambient temperature. When used in sealed area, confirm that it is the use in

the range that does not exceed the maximum junction temperature.

8.Confirm that operation temperature is within the specified range described in the product specification.

9.ROHM shall not be in any way responsible or liable for failure induced under deviant condition from what is defined in

this document.

Precaution for Mounting / Circuit board design

1. When a highly active halogenous (chlorine, bromine, etc.) flux is used, the residue of flux may negatively affect product

performance and reliability.

2. In principle, the reflow soldering method must be used on a surface-mount products, the flow soldering method must

be used on a through hole mount products. If the flow soldering method is preferred on a surface-mount products,

please consult with the ROHM representative in advance.

For details, please refer to ROHM Mounting specification

Not Recommended for

New Designs

Notice-PAA-E Rev.004

Precautions Regarding Application Examples and External Circuits

1. If change is made to the constant of an external circuit, please allow a sufficient margin considering variations of the

characteristics of the Products and external components, including transient characteristics, as well as static

characteristics.

2. You agree that application notes, reference designs, and associated data and information contained in this document

are presented only as guidance for Products use. Therefore, in case you use such information, you are solely

responsible for it and you must exercise your own independent verification and judgment in the use of such information

contained in this document. ROHM shall not be in any way responsible or liable for any damages, expenses or losses

incurred by you or third parties arising from the use of such information.

Precaution for Electrostatic

This Product is electrostatic sensitive product, which may be damaged due to electrostatic discharge. Please take proper

caution in your manufacturing process and storage so that voltage exceeding the Products maximum rating will not be

applied to Products. Please take special care under dry condition (e.g. Grounding of human body / equipment / solder iron,

isolation from charged objects, setting of Ionizer, friction prevention and temperature / humidity control).

Precaution for Storage / Transportation

1. Product performance and soldered connections may deteriorate if the Products are stored in the places where:

[a] the Products are exposed to sea winds or corrosive gases, including Cl2, H2S, NH3, SO2, and NO2

[b] the temperature or humidity exceeds those recommended by ROHM

[c] the Products are exposed to direct sunshine or condensation

[d] the Products are exposed to high Electrostatic

2. Even under ROHM recommended storage condition, solderability of products out of recommended storage time period

may be degraded. It is strongly recommended to confirm solderability before using Products of which storage time is

exceeding the recommended storage time period.

3. Store / transport cartons in the correct direction, which is indicated on a carton with a symbol. Otherwise bent leads

may occur due to excessive stress applied when dropping of a carton.

4. Use Products within the specified time after opening a humidity barrier bag. Baking is required before using Products of

which storage time is exceeding the recommended storage time period.

Precaution for Product Label

A two-dimensional barcode printed on ROHM Products label is for ROHM’s internal use only.

Precaution for Disposition

When disposing Products please dispose them properly using an authorized industry waste company.

Precaution for Foreign Exchange and Foreign Trade act

Since concerned goods might be fallen under listed items of export control prescribed by Foreign exchange and Foreign

trade act, please consult with ROHM in case of export.

Precaution Regarding Intellectual Property Rights

1. All information and data including but not limited to application example contained in this document is for reference

only. ROHM does not warrant that foregoing information or data will not infringe any intellectual property rights or any

other rights of any third party regarding such information or data.

2. ROHM shall not have any obligations where the claims, actions or demands arising from the combination of the

Products with other articles such as components, circuits, systems or external equipment (including software).

3. No license, expressly or implied, is granted hereby under any intellectual property rights or other rights of ROHM or any

third parties with respect to the Products or the information contained in this document. Provided, however, that ROHM

will not assert its intellectual property rights or other rights against you or your customers to the extent necessary to

manufacture or sell products containing the Products, subject to the terms and conditions herein.

Other Precaution

1. This document may not be reprinted or reproduced, in whole or in part, without prior written consent of ROHM.

2. The Products may not be disassembled, converted, modified, reproduced or otherwise changed without prior written

consent of ROHM.

3. In no event shall you use in any way whatsoever the Products and the related technical information contained in the

Products or this document for any military purposes, including but not limited to, the development of mass-destruction

weapons.

4. The proper names of companies or products described in this document are trademarks or registered trademarks of

ROHM, its affiliated companies or third parties.

Not Recommended for

New Designs

DatasheetDatasheet

Notice – WE Rev.001

General Precaution

1. Before you use our Products, you are requested to carefully read this document and fully understand its contents.

ROHM shall not be in any way responsible or liable for failure, malfunction or accident arising from the use of any

ROHM’s Products against warning, caution or note contained in this document.

2. All information contained in this document is current as of the issuing date and subject to change without any prior

notice. Before purchasing or using ROHM’s Products, please confirm the latest information with a ROHM sales

representative.

3. The information contained in this document is provided on an “as is” basis and ROHM does not warrant that all

information contained in this document is accurate and/or error-free. ROHM shall not be in any way responsible or

liable for an y damages, expenses or losses incurred b y you or third parties resulting from inaccuracy or errors of or

concerning such information.

Not Recommended for

New Designs