FUJITSU TAKAMISAWA COMPONENT CATALOG PC BOARD CONNECTORS 700 SERIES FEATURES The 700 series connector has a superior ejector with a unique flexible latch. Terminals are palladium plated and have an excellent cost performance ratio. The solder dip section is a 0.5 mm (0.020 in.) square and can be used in a 0.8 mm (0.031 in.) through hole. Special strain relief prevents breakage. Two kinds of keys and bump polarization prevent incorrect insertion. Connectors with 4 mm (0.157 in.) long tails are also available for mounting on multilayer PC boards. SPECIFICATIONS Item Specification Operating temperature range -55C to +105C Current rating DC 1 A Voltage rating AC 250 V Contact resistance 120 m max. (DC 6 V, 0.1 A) Insulation resistance 1000 M min. (DC 500 V) Dielectric strength AC 500 V for 1 minute Insertion force 3.5 kg max. (10 pins), 21 kg max. (60 pins) Withdrawal force 0.25 kg min. (10 pins), 2.5 kg min. (60 pins) Applicable wire Flat cable: 1.27 mm (0.050 in.) pitch AWG #28 (stranded wires) or AWG #30 (solid wire) Applicable wire-wrapping wire AWG #26 to #30 (solid wire) MATERIALS Item Materials Insulating material Polyester (UL94V-0) Conductor Copper alloy Contact Gold Terminal Palladium Plating Applicable PC board (standard) 1.6 mm (0.062 in.) for standard terminal, 3.2 mm (0.125 in.) for long tail 700 Series HEADER DIMENSIONS (WITHOUT HOOK) 1. P (F) type (one side shrouded) 2.54 (0.100) 0.64 (0.025) 2 (0.079) *L 2 (0.079) 2-2.5 (0.098) Standard tail : 3.0 mm (0.118 in.) Long tail : 4.0 mm (0.157 in.) Unit: mm (in.) 7.8 (0.307) 0.5 (0.020) 2.54 (0.100) 0.3 (0.012) 17.3 (0.681) B *L *L FCN-704P FCN-702P 0.3 (0.012) 7.8 (0.307) 2.54 (0.100) 2-2.3 (0.090) E 1.8 (0.071) B 0.5 (0.020) C 3.6 (0.142) 0.3 (0.012) 0.3 D B D 2-2.5 (0.098) A D 2-2.3 (0.090) E 13.5 17.3 (0.531) (0.681) 2-2.5 (0.098) [Right-angle type] 17.3 (0.681) 2-2.3 (0.090) E 0.3 (0.012) 3.52 (0.139) A C *L A C [Straight type] 7.8 (0.307) 0.3 (0.012) 3.52 (0.139) [Wire-wrap type] Standard tail : 2.5 mm (0.098 in.) Long tail : 4.0 mm (0.157 in.) FCN-705P Unit: mm (in.) Unit: mm (in.) D B 2.54 0.64 (0.100) FCN-702Q (0.025) 2.54 (0.100) (0.346) 0.3 (0.012) 8.8 B *L *L *L Standard tail : 2.5 mm (0.098 in.) Standard tail : 3.0 mm (0.118 in.) Long tail : 4.0 mm (0.157 in.) FCN-704Q Unit: mm (in.) 17.3 3.18 2-2.5 (0.125) (0.098) 0.5 (0.020) 2.54 1.8 (0.100) (0.071) D B *L 2-2.5 (0.098) 0.5 3.18 (0.125) (0.020) 2-2.3 (0.090) E (0.681) 17.3 17.3 (0.681) 13.5 (0.531) 2-2.5 (0.098) C 3.6 (0.142) 2-2.3 (0.090) E (0.681) 2-2.3 (0.090) E A D 8.8 (0.346) A C 8.8 (0.346) A C 0.3 (0.012) 4.7 (0.185) 0.3 (0.012) 4.7 (0.185) 2. Q (G) type (both sides shrouded) FCN-705Q Unit: mm (in.) Unit: mm (in.) DIMENSION TABLE Number of contacts 10 14 16 20 26 30 34 40 50 60 A 32.0 (1.25) 37.1 (1.46) 39.6 (1.56) 44.7 (1.76) 52.3 (2.06) 57.4 (2.26) 62.5 (2.46) 70.1 (2.76) 82.8 (3.26) 95.5 (3.76) B 21.8 (.858) 26.9 (1.06) 29.4 (1.16) 34.5 (1.36) 42.2 (1.66) 47.2 (1.86) 52.3 (2.06) 59.9 (2.36) 72.6 (2.86) 85.3 (3.36) Dimensions (unit: mm (in.) ) C 27.9 (1.09) 33.0 (1.30) 35.5 (1.40) 40.6 (1.60) 48.3 (1.90) 53.3 (2.10) 58.4 (2.30) 66.0 (2.60) 78.7 (3.10) 91.4 (3.60) D 10.16 (0.400) 15.24 (0.600) 17.78 (0.700) 22.86 (0.900) 30.48 (1.20) 35.56 (1.40) 40.64 (1.60) 48.26 (1.90) 60.96 (2.40) 73.66 (2.90) E 18.3 (0.720) 23.4 (0.921) 25.9 (1.02) 31.0 (1.22) 38.6 (1.52) 43.7 (1.72) 48.8 (1.92) 56.4 (2.22) 69.0 (2.72) 81.8 (3.22) 2 700 Series HOOK FORM (COMMON TO P AND Q TYPES) F L latch M latch 17.3 27.4 (1.08) (Lock height) 29.95 (1.18) F' (0.681) F Without latch CONFIGURATION BY THE NUMBER OF PINS 10 pins (clip type) 10 pins (bump type) 14 pins 16 to 60 pins FCN-702, 704, 705P or Q FCN-702, 704, 705F or G FCN-702, 704, 705P or Q FCN-702, 704, 705P or Q PART NUMBERS Header type Tail length Number of contacts 10 14 16 20 26 30 34 40 50 60 Tail type Latch type Without latch L latch M latch Without latch L latch M latch Without latch L latch M latch Without latch L latch M latch Without latch L latch M latch Without latch L latch M latch Without latch L latch M latch Without latch L latch M latch Without latch L latch M latch Without latch L latch M latch designation: P for P type header (one side shrouded), Q for Q type header (both sides shrouded), F for 10-pin bump type header (one side shrouded), G for 10-pin bump type header (both sides shrouded) Standard tail (3.0 mm (0.118 in.) for straight, 2.5 mm (0.098 in.) for Long tail (4.0 mm (0.157 in.) for both right-angle) straight and right-angle) Right-angle type Right-angle type Straight type Wire-wrap type Straight type (P type only) FCN-704 010-AU/A FCN-705 010-AU/0 FCN-702 010-AU/0 FCN-705P010-AU/A FCN-704 010-AU/0 FCN-702 010-AU/L FCN-704 010-AU/L FCN-705 010-AU/L FCN-704 010-AU/B FCN-705P010-AU/B FCN-702 010-AU/M FCN-704 010-AU/M FCN-705 010-AU/M FCN-704 010-AU/C FCN-705P010-AU/C FCN-702 014-AU/0 FCN-704 014-AU/0 FCN-705 014-AU/0 FCN-704 014-AU/A FCN-705P014-AU/A FCN-702 014-AU/L FCN-704 014-AU/L FCN-705 014-AU/L FCN-704 014-AU/B FCN-705P014-AU/B FCN-702 014-AU/M FCN-704 014-AU/M FCN-705 014-AU/M FCN-704 014-AU/C FCN-705P014-AU/C FCN-702 016-AU/0 FCN-704 016-AU/0 FCN-705 016-AU/0 FCN-704 016-AU/A FCN-705P016-AU/A FCN-702 016-AU/L FCN-704 016-AU/L FCN-705 016-AU/L FCN-704 016-AU/B FCN-705P016-AU/B FCN-702 016-AU/M FCN-704 016-AU/M FCN-705 016-AU/M FCN-704 016-AU/C FCN-705P016-AU/C FCN-702 020-AU/0 FCN-704 020-AU/0 FCN-705 020-AU/0 FCN-704 020-AU/A FCN-705P020-AU/A FCN-702 020-AU/L FCN-704 020-AU/L FCN-705 020-AU/L FCN-704 020-AU/B FCN-705P020-AU/B FCN-702 020-AU/M FCN-704 020-AU/M FCN-705 020-AU/M FCN-704 020-AU/C FCN-705P020-AU/C FCN-702 026-AU/0 FCN-704 026-AU/0 FCN-705 026-AU/0 FCN-704 026-AU/A FCN-705P026-AU/A FCN-702 026-AU/L FCN-704 026-AU/L FCN-705 026-AU/L FCN-704 026-AU/B FCN-705P026-AU/B FCN-702 026-AU/M FCN-704 026-AU/M FCN-705 026-AU/M FCN-704 026-AU/C FCN-705P026-AU/C FCN-702 030-AU/0 FCN-704 030-AU/0 FCN-705 030-AU/0 FCN-704 030-AU/A FCN-705P030-AU/A FCN-702 030-AU/L FCN-704 030-AU/L FCN-705 030-AU/L FCN-704 030-AU/B FCN-705P030-AU/B FCN-702 030-AU/M FCN-704 030-AU/M FCN-705 030-AU/M FCN-704 030-AU/C FCN-705P030-AU/C FCN-702 034-AU/0 FCN-704 034-AU/0 FCN-705 034-AU/0 FCN-704 034-AU/A FCN-705P034-AU/A FCN-702 034-AU/L FCN-704 034-AU/L FCN-705 034-AU/L FCN-704 034-AU/B FCN-705P034-AU/B FCN-702 034-AU/M FCN-704 034-AU/M FCN-705 034-AU/M FCN-704 034-AU/C FCN-705P034-AU/C FCN-702 040-AU/0 FCN-704 040-AU/0 FCN-705 040-AU/0 FCN-704 040-AU/A FCN-705P040-AU/A FCN-702 040-AU/L FCN-704 040-AU/L FCN-705 040-AU/L FCN-704 040-AU/B FCN-705P040-AU/B FCN-702 040-AU/M FCN-704 040-AU/M FCN-705 040-AU/M FCN-704 040-AU/C FCN-705P040-AU/C FCN-702 050-AU/0 FCN-704 050-AU/0 FCN-705 050-AU/0 FCN-704 050-AU/A FCN-705P050-AU/A FCN-702 050-AU/L FCN-704 050-AU/L FCN-705 050-AU/L FCN-704 050-AU/B FCN-705P050-AU/B FCN-702 050-AU/M FCN-704 050-AU/M FCN-705 050-AU/M FCN-704 050-AU/C FCN-705P050-AU/C FCN-702 060-AU/0 FCN-704 060-AU/0 FCN-705 060-AU/0 FCN-704 060-AU/A FCN-705P060-AU/A FCN-702 060-AU/L FCN-704 060-AU/L FCN-705 060-AU/L FCN-704 060-AU/B FCN-705P060-AU/B FCN-702 060-AU/M FCN-704 060-AU/M FCN-705 060-AU/M FCN-704 060-AU/C FCN-705P060-AU/C 3 700 Series ACCESSORIES (POLARIZING KEY, LOCK SPRING) DIMENSIONS 7.6 (0.299) 4 (0.157) Note : Can be ordered in units of 10. 8.7 (0.342) 3 (0.118) 15.5 (0.610) 4 (0.157) 8 (0.315) 0.85 (0.033) 1.5 (0.059) Part number : FCN-700A3 (lock spring) Part number : FCN-700A2 25.5 (1.00) Part number : FCN-700A1 Note : Dotted lines indicate the section to be snapped off when used. Unit: mm (in.) 10.6 (0.417) Unit: mm (in.) Unit: mm (in.) SPECIFICATION OF POLARITY TO PREVENT INCORRECT INSERTION * Specify polarity as follows: * Header (pin type, clip type) * Socket (pin type) FCN-705P050-AU/M # (Header) FCN-707J050-AU/B # Basic part number Common Pin number with pin polarity Example 00: No polarity When the A2 key is not used, only the basic part number is specified without a suffix. 04: Pin 4 is cut or pulled out. Position of clip type polarity (see the figure on the right) Note: The standard specification is #04 or the end pin number (if the end pin is 50, the specification is 50). Basic part number Common Pin number with pin polarity Example 04: FCN-700A1 plugged into pin # A FCN-700A2 on both sides 4 Note: The specification method is the same for IDC plugs and through hole sockets. # B FCN-700A2 on only one side opposite the triangle mark ( ) (Socket) #01 FCN-700A1 plugged into pin 1 MOUNTING HOLE LAYOUT 0.74 (.029) 0.1(.004) 2.54 (.100) 0.1(.004) 3.6 (0.142) 10~15 (0.939~0.590) B 0.1(.004) D 0.2(.008) X Note : When inserting a 720 series cover, mounting holes should be located less than 9 mm (0.354 in.) from the edge of the PC board. 1.52 (.060) 0.1(.004) 2.54 (.100) 0.1(.004) 3.52 (0.139) Socket (straight type) Header (right-angle P and Q type) C 0.1(.004) D 0.2(.008) X 0.8 (0.304) 0.06(.002) Hole For straight tail 1.52 (.060) 0.1(.004) 2.54 (.10) 0.1(.004) 4.7 (0.185) Header (straight, wire-wrap Q type) See the table on the preceding page for the dimensions. C 0.1(.004) D 0.2(.008) With L latch : 30.48 mm (1.20 in.) min. With M latch, without latch : 22.86 mm (0.900 in.) min. for X X Header (straight, wire-wrap P type) 2.54 (.100) 0.1(.004) Edge of PC board 0.8(.304) 0.06 (.002) Hole 2.8 (0.110) Hole 1.0 (0.039) 0.06(.002) Hole For wire-wrap tail 2.8 (0.110) Hole 40.46 (1.593) 0.2(.008) 7.5 (0.295) min. When mated with a 700 series header, the header's pitch should be used. 0.8 (0.304) 0.06(.002) Hole 2.8 (0.110) Hole 0.8(.304) 0.06(.002) Hole for straight tail 1.0 (0.039) 0.06(.002) Hole for wire-wrap tail Notes: * * * * Unit: mm (in.) See the next page for cable termination. See the next page for IDC tools. The last digit (0) of the part number is zero. Use tapping screws JIS B1122, 2.5x6 to mount a straight connector on PC boards. 4