0 Items Sign In
SHOP BLOG LEARN FORUMS VIDEOS
ROBOTICS & CNC / EXTRUSIONS / ADJUSTABLE ANGLE SUPPORT FOR 2020 ALUMINUM EXTRUSION
DESCRIPTION
This is an interesting hardware piece addition for 20x20 aluminum extrusion. Rather than being
a 90 degree type plate, its a hinged piece that connects the end of one extrusion to the side of
another, but with any angle you wish. You can loosen/tighten the angle with the screw on the
side. Given its just a bolt, it's not incredibly strong so while you can use it for structure, its not a
load-bearing connector: make sure there isn't a lot of torque on the joint. You can use thread-
lock to make it stronger.
The half that connects to the side one an extrusion simply uses a single M4 or M5 x 8mm long
screw + T-nut as you'd use with any other plate. For the half that connects to the end of an
extrusion, you'll need to tap the 5mm diameter center-hole of the extrusion and screw directly in.
We don't include a tap or matching screw so you'll want to pick those up from a hardware store.
New Products 2/9/2013
1
ADD TO CART
Adjustable Angle
Support for 2020
Aluminum Extrusion
PRODUCT ID: 1257
29 IN STOCK
1-9
10-99
100+
ADD TO WISHLIST
DESCRIPTION
TECHNICAL DETAILS
Adjustable Angle Support for 2020 Aluminum Extrusion (15:07)
TECHNICAL DETAILS
MAY WE ALSO SUGGEST...
Slotted Aluminum Extrusion
- 20mm x 20mm - 610mm
Button Hex Machine Screw
- M4 thread - 8mm long -
Aluminum Extrusion Corner
Brace Support (for 20x20)
Linear Rail Shaft
Guide/Support - 8mm
Allen Wrench (Hex Key) -
2.5mm
L-Plate for 2020 Aluminum
Extrusion
Plastic Hinge for 20x20
Aluminum Extrusion
Aluminum Extrusion Double
Corner Brace Support (for
T-Plate for 2020 Aluminum
Extrusion
Coupling Plate - 3 Holes -
20x20 Aluminum Extrusion
Linear Bearing Supported
Slide Rail - 12mm wide -
Cross-Plate for 2020
Aluminum Extrusion
EXPAND TO SEE DISTRIBUTORS
DISTRIBUTORS
CONTACT
"...programming is more than an
