https://www.phoenixcontact.com/us/products/3002773
06/07/2021Page1/11
Distribution block-PTFIX 18X1,5 GN-3002773
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Distribution block, bridged internally, the blocks can be bridged with one another via the conductor shaft, for
corresponding plug-in bridges, see accessories, nom. voltage: 450 V, nominal current: 17.5 A, connection
method: Push-in connection, number of connections: 18, cross section: 0.14 mm²-2.5 mm², AWG:26-14, width:
37.4 mm, height: 17.7 mm, color: green, mounting type: for snapping onto a DIN rail adapter, Direct mounting
with flange, Free-hanging
Your advantages
Space-saving, thanks to the compact design
Clear arrangement thanks to marking of all terminal points
Flexible use, thanks to direct mounting with flange covers from accessories
Space-saving potential distribution, thanks to compact micro potential distributors
Convenient test options, thanks to test openings at every terminal point
Key Commercial Data
Packing unit 1 pc
Minimum order quantity 20 pc
GTIN
GTIN 4055626432540
Weight per Piece (excluding packing) 16.000 g
Custom tariff number 85369010
Country of origin Poland
Technical data
General
Note Notes on operation the blocks can be bridged with one another via the
conductor shaft, for corresponding plug-in bridges, see accessories
Number of levels 1
Number of connections 18
https://www.phoenixcontact.com/us/products/3002773
06/07/2021Page2/11
Distribution block-PTFIX 18X1,5 GN-3002773
Technical data
General
Potentials 1
Nominal cross section 1.5 mm²
Color green
Insulating material PA
Flammability rating according to UL 94 V0
Rated surge voltage 6 kV
Degree of pollution 3
Overvoltage category III
Insulating material group I
Maximum load current 22 A
Maximum total current 26 A
Nominal current IN17.5 A
Nominal voltage UN450 V
Open side panel No
Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11
Back of the hand protection guaranteed
Finger protection guaranteed
Result of thermal test Test passed
Proof of thermal characteristics (needle flame) effective duration 30 s
Ageing test for screwless modular terminal block temperature cycles 192
Relative insulation material temperature index (Elec., UL 746 B) 130 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
Static insulating material application in cold -60 °C
Surface flammability NFPA 130 (ASTM E 162) passed
Specific optical density of smoke NFPA 130 (ASTM E 662) passed
Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg
Smoke gas toxicity NFPA 130 (SMP 800C) passed
Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
Dimensions
Width 37.4 mm
Length 21.6 mm
Height 17.7 mm
Connection data
https://www.phoenixcontact.com/us/products/3002773
06/07/2021Page3/11
Distribution block-PTFIX 18X1,5 GN-3002773
Technical data
Connection data
Connection method Push-in connection
Stripping length 8 mm ... 10 mm
Connection in acc. with standard IEC60998-2-2
Conductor cross section solid min. 0.14 mm²
Conductor cross section solid max. 2.5 mm²
Conductor cross section AWG min. 26
Conductor cross section AWG max. 14
Conductor cross section flexible min. 0.14 mm²
Conductor cross section flexible max. 1.5 mm²
Min. AWG conductor cross section, flexible 24
Max. AWG conductor cross section, flexible 14
Conductor cross section flexible, with ferrule without plastic sleeve min. 0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max. 1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min. 0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max. 1.5 mm²
Connection cross sections directly pluggable 0.34 mm² 2.5 mm² 26 14
Conductor cross section solid min. 0.34 mm²
Conductor cross section solid max. 2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min. 0.34 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max. 1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min. 0.34 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max. 1.5 mm²
Internal cylindrical gage A1 / B1
Ambient conditions
Operating temperature -60 °C ... 105 °C (max. short-term operating temperature130°C)
Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24h, -60°C to +70°C)
Permissible humidity (storage/transport) 30 % ... 70 %
Ambient temperature (assembly) -5 °C ... 70 °C
Ambient temperature (actuation) -5 °C ... 70 °C
Standards and Regulations
Connection in acc. with standard IEC60998-2-2
Flammability rating according to UL 94 V0
Environmental Product Compliance
China RoHS Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
https://www.phoenixcontact.com/us/products/3002773
06/07/2021Page4/11
Distribution block-PTFIX 18X1,5 GN-3002773
Drawings
Circuit diagram
Classifications
eCl@ss
eCl@ss 10.0.1 27141120
eCl@ss 11.0 27141120
eCl@ss 4.0 27141120
eCl@ss 4.1 27141120
eCl@ss 5.0 27141120
eCl@ss 5.1 27141120
eCl@ss 6.0 27141100
eCl@ss 7.0 27141120
eCl@ss 9.0 27141120
ETIM
ETIM 2.0 EC000897
ETIM 3.0 EC000897
ETIM 4.0 EC000897
ETIM 6.0 EC000897
ETIM 7.0 EC000897
UNSPSC
UNSPSC 6.01 30211811
UNSPSC 7.0901 39121410
UNSPSC 11 39121410
UNSPSC 12.01 39121410
UNSPSC 13.2 39121410
UNSPSC 18.0 39121410
UNSPSC 19.0 39121410
UNSPSC 20.0 39121410
UNSPSC 21.0 39121410
Approvals
Approvals
https://www.phoenixcontact.com/us/products/3002773
06/07/2021Page5/11
Distribution block-PTFIX 18X1,5 GN-3002773
Approvals
Approvals
CSA / EAC / EAC / LR / UL Recognized / cUL Recognized / cUL Recognized / DNV GL / IECEE CB Scheme / BV / VDE Zeichengenehmigung
Ex Approvals
Approval details
CSA http://www.csagroup.org/services-industries/product-listing/ 13631
B C D
Nominal voltage UN 300 V 150 V 300 V
Nominal current IN 20 A 20 A 10 A
mm²/AWG/kcmil 26-12 26-12 26-12
EAC RU C-
DE.AI30.B.01102
EAC RU C-
DE.BL08.B.00644
LR http://www.lr.org/en LR2002627TA
UL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 60425
B C D
Nominal voltage UN 300 V 150 V 300 V
Nominal current IN 20 A 20 A 10 A
mm²/AWG/kcmil 26-12 26-12 26-12
https://www.phoenixcontact.com/us/products/3002773
06/07/2021Page6/11
Distribution block-PTFIX 18X1,5 GN-3002773
Approvals
cUL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 60425
cUL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 60425
B C D
Nominal voltage UN 300 V 150 V 300 V
Nominal current IN 20 A 20 A 10 A
mm²/AWG/kcmil 26-12 26-12 26-12
DNV GL https://approvalfinder.dnvgl.com/ TAE00002TT
Nominal voltage UN 500 V
Nominal current IN 24 A
IECEE CB Scheme http://www.iecee.org/ DE1-61977
Nominal voltage UN 450 V
Nominal current IN 17.5 A
mm²/AWG/kcmil 1.5
BV http://www.veristar.com/portal/veristarinfo/generalinfo/
approved/approvedProducts/equipmentAndMaterials 59146/A0 BV
VDE Zeichengenehmigung http://www2.vde.com/de/Institut/Online-Service/
VDE-gepruefteProdukte/Seiten/Online-Suche.aspx 40047798
Nominal voltage UN 450 V
Nominal current IN 17.5 A
mm²/AWG/kcmil 0.2-1.5
https://www.phoenixcontact.com/us/products/3002773
06/07/2021Page7/11
Distribution block-PTFIX 18X1,5 GN-3002773
Accessories
Accessories
Insulating sleeve
Insulating sleeve-ISH 1,5/0,2-3206131
Insulating sleeve, color: white
Insulating sleeve-ISH 1,5/0,5-3031034
Insulating sleeve, color: gray
Jumper
Plug-in bridge-FBS 2-4-3030116
Plug-in bridge, pitch: 4.2 mm, number of positions: 2, color: red
Plug-in bridge-FBS 2-4 GY-3030118
Plug-in bridge, pitch: 4.2 mm, number of positions: 2, color: gray
https://www.phoenixcontact.com/us/products/3002773
06/07/2021Page8/11
Distribution block-PTFIX 18X1,5 GN-3002773
Accessories
Plug-in bridge-FBS 2-4 BU-3030117
Plug-in bridge, pitch: 4.2 mm, number of positions: 2, color: blue
Labeled terminal marker
Marker card-SK 3,8 REEL P4,15 WH CUS-0825990
Marker card, Card, can be ordered: by card, white, labeled according to customer specifications, mounting type:
adhesive, for terminal block width: 4.15 mm, lettering field size: continuous x 3.8mm
Marker card-SK 2,8 REEL P4,15 WH CUS-8199987
Marker card, Card, can be ordered: by card, white, labeled according to customer specifications, mounting type:
adhesive, for terminal block width: 4.15 mm, lettering field size: continuous x 2.8mm
Marker card-SK 3,8 REEL P4,15 WH CUS-8199988
Marker card, Card, can be ordered: by card, white, labeled according to customer specifications, mounting type:
adhesive, for terminal block width: 4.15 mm, lettering field size: continuous x 3.8mm
Mounting material
Flange-PTFIX 1,5-F-1049503
Flange, with screw-on fixing, width: 7.7 mm, height: 17.7 mm, color: gray, mounting type: Screw mounting
https://www.phoenixcontact.com/us/products/3002773
06/07/2021Page9/11
Distribution block-PTFIX 18X1,5 GN-3002773
Accessories
DIN rail adapter-PTFIX 1,5-NS15A-1049500
DIN rail adapter, length: 21.6 mm, width: 8 mm, height: 10.85 mm
DIN rail adapter-PTFIX 1,5-NS35-1049497
DIN rail adapter, length: 58.1 mm, width: 21.6 mm, height: 11 mm
DIN rail adapter-PTFIX 1,5-NS35AD-1049498
DIN rail adapter, for NS35 for accommodating two rows of PTFIX 1,5 distribution blocks, length: 44.4 mm, width: 8 mm,
height: 10.9 mm
Assembly adapters-PTFIX 1,5-RZF-1050613
Adapter for direct mounting
Terminal marking
Marking foil for zack marker strip-TML (EX3,8)R-0801837
Marking foil for zack marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL 2.0,
THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2,
mounting type: adhesive, for terminal block width: 30000 mm, lettering field size: 30000x3.8mm, Number of individual
labels: 1
https://www.phoenixcontact.com/us/products/3002773
06/07/2021Page10/11
Distribution block-PTFIX 18X1,5 GN-3002773
Accessories
Marking foil for zack marker strip-TML (104X3,8)R-0801833
Marking foil for zack marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL 2.0,
THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2,
mounting type: adhesive, for terminal block width: 104 mm, lettering field size: 104 x 3.8 mm, Number of individual labels:
2500
Marking foil for zack marker strip-TML (104X2,8)R-0801832
Marking foil for zack marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL 2.0,
THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2,
mounting type: adhesive, for terminal block width: 104 mm, lettering field size: 104 x 2.8 mm, Number of individual labels:
2500
Marking foil for zack marker strip-TML (EX2,8)R-0801836
Marking foil for zack marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL 2.0,
THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2,
mounting type: adhesive, for terminal block width: 30000 mm, lettering field size: 30000x2.8mm, Number of individual
labels: 1
Marker for terminal blocks-US-TML (104X3,8)-0830768
Marker for terminal blocks, Card, white, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID,
THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: adhesive, lettering field
size: 104 x 3.8 mm, Number of individual labels: 22
Marker for terminal blocks-US-TML (104X2,8)-0830767
Marker for terminal blocks, Card, white, unlabeled, can be labeled with: BLUEMARKIDCOLOR, BLUEMARKID,
THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: adhesive, lettering field
size: 104 x 2.8 mm, Number of individual labels: 26
https://www.phoenixcontact.com/us/products/3002773
06/07/2021Page11/11
Distribution block-PTFIX 18X1,5 GN-3002773
Accessories
Marker card-SK U/3,8 WH:UNBEDRUCKT-0803906
Marker card, Sheet, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, Office printing systems,
mounting type: adhesive, for terminal block width: 210 mm, lettering field size: 186 x 3.8 mm, Number of individual labels:
1440
Marker card-SK U/2,8 WH:UNBEDRUCKT-0803883
Marker card, Sheet, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, Office printing systems,
mounting type: adhesive, for terminal block width: 210 mm, lettering field size: 186 x 2.8 mm, Number of individual labels:
3600
Label-MM-TML (EX3,8)R C1 WH/BK-1092026
Label, Roll, white, unlabeled, can be labeled with: THERMOFOX, THERMOMARKGO, THERMOMARK GO.K, mounting
type: adhesive, for terminal block width: 8000 mm, lettering field size: continuous x 3.8mm
Test plug terminal block
Accessories-MPS-MT 1-S4-B RD-1982800
Accessories, number of positions: 1, pitch: 0 mm
Phoenix Contact 2021 © - all rights reserved
http://www.phoenixcontact.com