APW1683 3-Channel Power Supply Supervisor Features General Description * The APW1683 is designed to minimize the external components of personal-computer switching power supply systems. It provides protection circuits, power good indicator, fault protection output FPO and PSON control. Over Voltage Protection and Lock Out for ! 3.3 V, 5 V, and 12 V * ! Under Voltage Protection and Lock Out for 3.3 V and 5 V * Fault Protection Output with Open Drain Output Stage * Open Drain Power Good Output Signal for Power Good Input, 3.3 V and 5 V ! * * OVP (over voltage protection) monitors 3.3V, 5 V, and 12 V (12 V OV detects via V CC terminal). UVP (under voltage protection) monitors 3.3V and 5V. When an OV or UV condition is detected, the PGO (power good output) is set to low and FPO is latched to high. PSON from low to high resets the protection latch. There is a 2.3ms turn-off delay from PSON to FPO . There is no delay during turn on. 300 ms Power Good Delay 2.3 ms PSON Control to FPO Turn-Off Delay * 38 ms PSON Control Debounce Power good feature monitors PGI, 3.3V and 5V under voltages, and issues a power good signal when they are ready. * 75 ms Delay for 3.3V and 5V Under Voltage ! Protection * * 73 s Width Noise Deglitches Pin Description Wide Power Supply Voltage Range from 4 V to 15 V * Intelligent Under Voltage Protection to Pre PGI 1 8 PGO GND 2 7 VCC FPO 3 6 VS5 PSON 4 5 VS33 vent Instantaneously AC Power Black Out Applications * PC Switching Power Supply Ordering Information APW1683 Package Code J : DIP - 8 Temp. Range C : 0 to 70 C Handling Code TU : Tube Handling Code Temp. Range Package Code ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and advise customers to obtain the latest version of relevant information to verify before placing orders. Copyright ANPEC Electronics Corp. Rev. P.2 - Aug., 2001 1 www.anpec.com.tw APW1683 Block Diagram VCC VREF + 12 OV POR Reset RL=100k Bandgap Reference Vreg VDD=3.5V VREF 1.192V R VS5 R R VREF + 73s Debounce 5 OV 73s Debounce RL=100k R FPO S Q 2.3 ms Delay EN VS33 RTT Reset Dominent Latch VDD Reset 38ms Debounce VREF 3.3 OV + 75ms Delay EN Counter RL=100k VREF VREF PSON + R 3.3 UV R + 5 UV 1.15V + PGI1 0.95V + PGI2 150s Debounce and 4.8ms delay 73s Debounce PGO EN 300ms Delay Counter GND PGI Absolute Maximum Ratings Sym bol V CC VS5, VS33 FPO PSO N PG I PG O TA T STG TL Param eter Supply Voltage 5V and 3.3V Input Voltage(Note 1) Fault Protection O utput Voltage O N/O FF Control Input Voltage(Note 1) Power G ood Input Voltage(Note 1) Power G ood O utput Voltage(Note 1) Am bient Tem perature Range Storage Tem perature R ange Lead Tem perature (Soldering, 10 second) Rating 16 8 16 8 8 8 0 to 70 -65 to +150 260 Unit V V V V V V C C C Note 1: For a short period (<1 sec) over voltage test, these pins can withstand up to 12V. Copyright ANPEC Electronics Corp. Rev. P.2 - Aug., 2001 2 www.anpec.com.tw APW1683 Pin Function Description Terminal NO. I/O Terminal Function Description VS33 5 I 3.3 V over/under voltage protection input pin VS5 6 I 5 V over/under voltage protection input pin GND 2 FPO 3 O Inverted fault protection output, open drain output stage PGI 1 I Power good input signal pin PGO 8 O Power good output signal pin, open drain output stage PSON 4 I ON/OFF control input pin VCC 7 I Supply voltage/12 V over voltage protection input pin Name Ground Function Table L UV Condition ( 3.3 V or 5V ) no OV Condition ( 3.3V, 5V, or 12V ) no <0.95V L no <0.95V L 0.95V<PGI<1.15V L 0.95V<PGI<1.15V 0.95V<PGI<1.15V PGI PSON FPO PGO <0.95V L L yes H L yes no L L no no L L L no yes H L L yes no H L PGI>1.15V L no no L H PGI>1.15V L no yes H L PGI>1.15V L yes no H L X H X X H L X = don't care FPO = L means: fault is NOT latched FPO = H means: fault is latched PGO = L means: fault PGO = H means: NO fault Thermal Characteristics Symbol RTHJA Parameter Thermal Resistance from Junction to Ambient in Free Air Value Unit DIP-8 129 K/W Copyright ANPEC Electronics Corp. Rev. P.2 - Aug., 2001 3 www.anpec.com.tw APW1683 Electrical Characteristics Symbol Parameter Test Conditions APW1683 Unit Min. Typ. Max. VS33 3.7 3.9 4.1 VS5 5.7 6.1 6.5 VCC 13.2 13.8 14.4 Over Voltage Protection Over Voltage Threshold V ILKG Leakage Current ( FPO ) V( FPO )=5V 5 A VOL Low Level Output Voltage ( FPO ) ISINK= 10mA 0.3 V ISINK= 30mA 0.7 VOH FPO Pin Pull High Voltage 15 V V PGI and PGO Input Threshold Voltage (PGI) PGI1 1.1 1.15 1.2 PGI2 0.9 0.95 1.0 VS33 2.0 2.2 2.4 VS5 3.3 3.5 3.7 49 75 114 ms 5 A 0.4 V 7 V Under Voltage threshold Under Voltage Protection Delay Time (3.3V and 5V) ILKG Leakage Current (PGO) PGO=5V VOL Low Level Output Voltage (PGO) Sink Current = 10mA VOH PGO Pin Pull High Voltage V PSON Control Input Pull-Up Current High-Level Input Voltage A 150 PSON = 0V 2.4 V Low-Level Input Voltage 1.2 V 15 V 1 mA Total Device VCC Supply Voltage ICC Supply Current 4 PSON =5V Switching Characteristics td1 Delay time (PGI to PGO) 200 300 450 ms tb Debounce Time ( PSON ) 24 38 57 ms Tdg Noise Deglitch Time 47 73 110 s td2 Delay Time ( PSON to FPO ) tb+4 ms Copyright ANPEC Electronics Corp. Rev. P.2 - Aug., 2001 tb+1.1 tb+2.3 4 www.anpec.com.tw APW1683 Typical Application Circuit 5 VSB PGI PGO APW1683 12 V 1 2 3 PSON 4 PGI PGO GND VCC FPO VS5 PSON VS33 8 0.5V Drop 7 5 VSB 6 5V 5 3.3 V Custormer Service Anpec Electronics Corp. Head Office : 5F, No. 2 Li-Hsin Road, SBIP, Hsin-Chu, Taiwan, R.O.C. Tel : 886-3-5642000 Fax : 886-3-5642050 Taipei Branch : 7F, No. 137, Lane 235, Pac Chiao Rd., Hsin Tien City, Taipei Hsien, Taiwan, R. O. C. Tel : 886-2-89191368 Fax : 886-2-89191369 Copyright ANPEC Electronics Corp. Rev. P.2 - Aug., 2001 5 www.anpec.com.tw APW1683 Timing Chart VDD Reset R PSON S Q FPO PGI 3.3V 5V 12V PGO td1 td1 td1 PG Off Delay Protection Occur tb tb td2 AC OFF PSON OFF Copyright ANPEC Electronics Corp. Rev. P.2 - Aug., 2001 6 PSON ON www.anpec.com.tw APW1683 Packaging Information PDIP-8pin (Reference JEDEC Registration MS-001) D E1 E 1 A2 A 1 E3 A1 L e2 e1 e3 Dim Mi ll im et er s Min . Inche s Max . 5. 33 A Min. Max . 0. 210 A1 0. 38 A2 2. 92 3. 68 0. 11 5 0. 145 D 9. 02 10 .16 0. 355 0. 400 2. 54B S C e1 e2 0. 36 e3 1. 14 0. 100 B S C 0. 56 0. 014 1. 78 0. 045 7. 62 B SC 8. 26 E E1 0. 015 6. 10 0. 070 0. 300 B SC 0. 325 7. 11 0. 240 10 .92 E3 0. 022 0. 280 0. 430 L 2. 92 3. 81 0. 11 5 0. 150 1 0 15 0 15 Copyright ANPEC Electronics Corp. Rev. P.2 - Aug., 2001 7 www.anpec.com.tw