49906A Molded Cable Assemblies - D-Subminiature Assembly For more information please call 1-800-Belden1 See Put-ups and Colors Description: 9-position shielded D-Sub for RS-449 applications, straight handle both ends, S-R PVC insulation, PVC jacket. PHYSICAL CHARACTERISTICS: CONDUCTOR: Number of Conductors 9 Total Number of Conductors 9 Number of Pins 9 AWG 24 Stranding 7x32 Conductor Diameter .024 in. Conductor Material TC - Tinned Copper INSULATION: Insulation Material S-R PVC - Semi-Rigid Polyvinyl Chloride Nom. Insulation Wall Thickness 0.01 in. OUTER SHIELD: Outer Shield Trade Name Beldfoil(R) Outer Shield Type Tape Outer Shield Material Aluminum Foil-Polyester Tape Outer Shield %Coverage 100 % OUTER SHIELD DRAIN WIRE : Outer Shield Drain Wire AWG 24 Outer Shield Drain Wire Stranding 7x32 Outer Shield Drain Wire Conductor Material TC - Tinned Copper OUTER JACKET: Outer Jacket Material PVC - Polyvinyl Chloride Outer Jacket Nominal Wall Thickness 0.032 in. OVERALL NOMINAL DIAMETER: Overall Nominal Diameter .244 in. ASSEMBLY DIMENSIONAL CHARACTERISTICS: Page 1 of 3 49906A Molded Cable Assemblies - D-Subminiature Assembly Assembly Dimensional Length 10 ft. CONNECTOR CHARACTERISTICS: FIRST END : Connector Characteristics - First End Connector Type D-Sub Connector Characteristics - First End # of Connector Contacts/positions 9 Connector Characteristics - First End Connector Gender Male Connector Characteristics - First End Connector Shielding Type Metal Backshell Connector Characteristics - First End Overmold Type 9 Position D-Sub Connector Characteristics - First End Overmold Compound Material PVC Connector Characteristics - First End Overmold Color Chrome Connector Characteristics - First End Retention Hardware Thumbscrew SECOND END : Connector Characteristics - Second End Connector Type D-Sub Connector Characteristics - Second End # of Connector Contacts/positions 9 Connector Characteristics - Second End Connector Gender Female Connector Characteristics - Second End Connector Shielding Type Metal Backshells Connector Characteristics - Second End Overmold Type 9 Position D-Sub Connector Characteristics - Second End Overmold Compound Material PVC Connector Characteristics - Second End Overmold Color Chrome Connector Characteristics - Second End Retention Hardware Thumbscrew Wiring Point to Point. Pin #1 on end 1 to Pin #1 on end 2, Pin #2 to Pin #2, etc. Cable shield connected to connector shell. MECHANICAL CHARACTERISTICS: UL Temperature Rating 80C (UL AWM Style 2464) APPLICABLE SPECIFICATIONS AND AGENCY COMPLIANCE: NEC/(UL) Specification CM (cable only) AWM Specification UL Style 2464 (300 V 80C) (cable only) APPLICABLE STANDARDS: EU RoHS Compliant (Y/N) Yes Page 2 of 3 49906A Molded Cable Assemblies - D-Subminiature Assembly EU RoHS Compliance Date (mm/dd/yyyy): 04/01/2005 PLENUM/NON-PLENUM: Plenum (Y/N) N ELECTRICAL CHARACTERISTICS: Max. Operating Voltage - UL 300 V RMS (UL AWM Style 2464) NOTES: Notes Molded handles are 100% shielded to assist in FCC compliance and guard against EMI/RFI. All connectors tin-plated and male connectors have detents for positive ground connection. Wiring is point-to-point with the shield to connector shell. Notes (cont'd) Jack screw retention on both connectors. PUT-UPS AND COLORS: Item Description 49906A 060S2 9 POS SHD D-SUB 9539 Revision Number: 1 Put-Up (ft.) S2 Ship Weight (lbs.) 2 Jacket Color CHROME Notes Revision Date: 05-13-2005 (c) 2005 Belden Wire & Cable Company All Rights Reserved. Although Belden Electronics Division ("Belden") makes every reasonable effort to ensure their accuracy at the time of this publication, information and specifications described herein are subject to error or omission and to change without notice, and the listing of such information and specifications does not ensure product availability. Belden provides the information and specifications herein on an "AS IS" basis, with no representations or warranties, whether express, statutory or implied. In no event will Belden be liable for any damages (including consequential, indirect, incidental, special, punitive, or exemplary damages) whatsoever, even if Belden has been advised of the possibility of such damages, whether in an action under contract, negligence or any other theory, arising out of or in connection with the use, or inability to use, the information or specifications described herein. All sales of Belden products are subject to Belden's standard terms and conditions of sale. Belden CDT Electronics Division believes this product to be in compliance with the following environmental regulations: California Proposition 65 Consent Judgment For Wire & Cable Mfgs.(San Francisco Superior Court Nos. 312962 And 320342); EU RoHS (Directive 2002/95/EC, 27-Jan-2003);Material manufactured prior to the compliance date may still be in stock at Belden facilities and in our Distributor's inventory. EU ELV (Directive 2000/53/EC, 18-Sept-2000); EU WEEE (Directive 2002/96/EC, 27-Jan-2003); And EU BFR (Directive 2003/11/EC, 6-Feb-2003). The information provided in this Product Disclosure, and the identification of materials listed as reportable or restricted within the Product Disclosure, is correct to the best of Belden's knowledge, information and belief at the date of its publication. The information provided in the Product Disclosure is designed only as a general guide for the safe handling, storage, and any other operation of the product itself or the one that it becomes a part of. This Product Disclosure is not to be considered a warranty or quality specification. Regulatory information is for guidance purposes only. Product users are responsible for determining the applicability of legislation and regulations based on their individual usage of the product. Page 3 of 3