YA GEO CORPORATION ALUMINUM ELECTR OLYTIC CAPACITORS
Miniature Size Aluminum
Electrolytic Capacitors LG [ For 105ºC, 2000 Hours General ]
For Printed Circuit Board High-Performance Aluminum Electrolytic Power
Supply Input and Output Filter Capacitors
DESCRIPTION (LG Series 105ºC 2000 Hours Assured)
LG type capacitors are combined with
snaplock terminals for easy to mount on P.C.
Board.
They are ideally suitable to be used in
switching power supplies and other industrial
or commercial applications.
For Detail Specifications, Please Refer to
Engineering Bulletin No. 2062
SPECIFICATIONS
ITEMS SPECIFICATIONS
Rated Voltage Range 6.3 to 100VDC 160 to 450VDC
Operating Temperature Range -40 to +105ºC -25 to+105ºC
Capacitance T olerance ±20% (At 25ºC,120Hz)
Leakage Current I = 0.02CV, L = 20m/m, I = 0.03CV or 3mA Whichever is smaller.
(At 25ºC, After 5 Minutes)
Where, I; Leakage Current (µA) C: Nominal Capacitance (µF) V; Rated Voltage (V)
Dissipation Factor (tan∂)Rate Voltage (V) 6.3 10 16 25 35 50~80 100 160~250 315~450
D.F (%) 60 50402525 20 15 10 * 15
* Note : 15% For D = 35m/m or L = 20m/m (At 25ºC, 120Hz)
(WV = 6.3 ~ 100V For Capacitor Whose Capacitance Exceeds 1000µF
The value of D.F (%) is increased by 2% for every addition of 1000µF.)
Low T emperature Rated Voltage (V) 6.3~16 25 35 50~63 80~100 160~400 450
Characteristics Z(-25ºC) / Z(20ºC) 4 3 3 2 2 4 8
(120Hz) Z(-40ºC) / Z(20ºC) 15 10 8 6 5 – –
Load Life The following specifications shall be satisfied when the capacitors are restored to
25ºC after the rated voltage with maximum ripple current is applied for 2000 hours
at 105ºC.
Capacitance Change ≤ ±20% of the Inital Value
D.F ≤ 200% of the Initial Specified Value
Leakage Current ≤ the Initial Specified Value
Shelf Life The following specifications shall be satisfied when the capacitor are restored to 25ºC
after exposing them for 1000 hours at 105ºC without voltage applied.
Capacitance Change ≤ ±20% of the Inital Value
D.F ≤ 150% of the Intial Specitied Value
Leakage Current ≤ 150% of Initial Speciffied Value
Unit : mm
Vinyl Sleeve
Botton Plate Negative
L+2 Max. 5.8±1D±1
10±0.5
Safety Device
2m/m x 2
1.5
0.910±0.5
5.8±1.0
3.0
0.8
DIA GRAM OF DIMENSIONS
Location of P.C.B. Holes