28/11/08 DB91048
0.26
0.5
Dimensions in mm
10.16
7.0
6.0
1.2
7.62
3.0
13°
Max
3.35
4.0
3.0
2.54
0.26
7.62
6.62
0.5
1
34
6
25
OPTION G
7.62
SURFACE MOUNT
OPTION SM
OPTICALLY COUPLED BILATERAL
SWITCH LIGHT ACTIV ATED ZERO
VOLTAGE CROSSING TRIAC
APPROVALS
zz
zz
zUL recognised, File No. E91231
Package Code " GG " or " TT "
'X' SPECIFICATION APPROV ALS
zz
zz
zVDE 0884 in 3 available lead form : -
- STD
- G form
- SMD approved to CECC 00802
DESCRIPTION
The MOC304_ Series are optically coupled
isolators consisting of a Gallium Arsenide
infrared emitting diode coupled with a monolithic
silicon detector performing the functions of a
zero crossing bilateral triac mounted in a
standard 6 pin dual-in-line package.
FEATURES
zOptions :-
10mm lead spread - add G after part no.
Surface mount - add SM after part no.
T ape&reel - add SMT&R after part no.
zHigh Isolation V oltage (5.3kVRMS ,7.5kVPK )
zZero Voltage Crossing
z400V Peak Blocking V oltage
zAll electrical parameters 100% tested
zCustom electrical selections available
APPLICATIONS
zCRTs
zPower Triac Driver
zMotors
zConsumer appliances
zPrinters
ABSOLUTE MAXIMUM RATINGS
(25 °C unless otherwise noted)
Storage T emperature -550C - +1500C
Operating Temperature -400C - +1000C
Lead Soldering Temperature 2600C
(1.6mm from case for 10 seconds)
INPUT DIODE
Forward Current 50mA
Reverse Voltage 6V
Power Dissipation 120mW
(derate linearly 1.41mW/0C above 250C)
OUTPUT PHOTO TRIAC
Off-State Output Terminal V oltage 400V
Peak Repetitive Surge Current
(PW=100μs, 120pps) 1A
Power Dissipation 150mW
(derate linearly 1.76mW/0C above 250C)
POWER DISSIPATION
T otal Power Dissipation 250mW
(derate linearly 2.94mW/0C above 250C)
10.46
9.86
0.6
0.1 1.25
0.75
MOC3040, MOC3041, MOC3042, MOC3043
MOC3040X, MOC3041X, MOC3042X, MOC3043X
ISOCOM COMPONENTS 2004 LTD
Unit 25B, Park V iew Road West,
Park V iew Industrial Estate, Brenda Road
Hartlepool, TS25 1UD England Tel:
(01429)863609 Fax : (01429) 863581 e-mail
sales@isocom.co.uk http://www.isocom.com
DB91048m-AAS/A8
28/11/08
PARAMETER MIN TYP MAX UNITS TEST CONDITION
ELECTRICAL CHARACTERISTICS ( TA = 25°C Unless otherwise noted )
Input Forward Voltage (VF) 1.2 1.4 V IF = 20mA
Reverse Current (IR)10μAV
R = 6V
Output Peak Off-state Current ( IDRM ) 500 nA VDRM = 400V (note 1 )
Peak Blocking Voltage ( VDRM ) 400 V IDRM = 500nA
On-state Voltage ( VTM ) 3.0 V ITM = 100mA ( peak )
Critical rate of rise of
of f-state Voltage ( dv/dt ) 600 1500 V/μs
Coupled Input Current to Trigger ( IFT )(note 2 )
MOC3040 30 mA VTM = 3V ( note 2 )
MOC3041 15 mA
MOC3042 10 mA
MOC3043 5 mA
Holding Current , either direction ( IH ) 400 μA
Input to Output Isolation Voltage V ISO 5300 VRMS See note 3
7500 VPK See note 3
Zero Inhibit Voltage ( VIH )20VI
F= Rated IFT
Crossing MT1-MT2 Voltage
Charact- above which device
-eristic will not trigger
Leakage in Inhibited State ( IS ) 500 μAI
F= Rated IFT
VDRM = Rated VDRM
Off-state
Note 1. Test voltage must be applied within dv/dt rating.
Note 2. Guaranteed to trigger at an IF value less than or equal to max. IFT , recommended IF lies
between Rated IFT and absolute max. I F .
Note 3. Measured with input leads shorted together and output leads shorted together.