System Power and Expansion CPU Rack CPU Rack CPU Backplane A CPU Rack consists of a CPU, Power Supply Unit, CPU Backplane, Basic I/O Modules, Special I/O Modules, and CPU Bus Modules. The Serial Communications Board and Memory Cards are optional. Note: The Backplane depends on the type of CPU Rack, Expansion I/O Racks, and Slave Racks that are used. Power Supply Unit I/O Modules Special I/O Modules Memory Card CS1 CPU Bus Modules Serial Communications Board I/O Connecting Cable Remote I/O Master Unit Expansion Rack I/O Backplane Expansion Racks Both C200H and CS1 Expansion Racks can be used. * C200H Expansion I/O Racks can be connected to CPU Racks, CS1 Expansion Racks, or other C200H Expansion I/O Racks. * CS1 Expansion Racks can be connected to CPU Racks or other CS1 Expansion Racks. An Expansion Rack consists of a Power Supply Module, a CS1 or C200H Expansion I/O Backplane , Basic I/O Modules, Special I/O Modules, and a CS1 CPU Bus Modules. I/O Modules Special I/O Modules CS1 CPU Bus Modules Power Supply Unit Long-distance Expansion Racks An I/O Control Module and I/O Interface Modules can be used to extend the normal limit of 12 m to 50 m for each of two series of CS1 Expansion Racks. The following Modules can be mounted to Long-distance Expansion Racks: CS1 Basic I/O Modules, CS1 Special I/O Modules, and CS1 CPU Bus Modules. (C200H Modules cannot be mounted to Long-distance Expansion Racks.) Programmable Controller CS1 C--149 System Power and Expansion CPU Rack J Configuration Name Configuration Remarks CPU Rack CPU Backplane One of each Module required q for every y CPU Rack. CPU Module Refer to the following g table for model number. Power Supply Module Memory Card Install as required. q Serial Communications Board Refer to the following table for model number. J Products Used in CPU Racks Name CPUs Model CS1H-CPU67H Specifications I/O bits: 5,120, Program capacity: 250K steps Data Memory: 448K words (DM: 32K words, EM: 32K words x 13 banks) CS1H-CPU66H I/O bits: 5,120, Program capacity: 120K steps Data Memory: 256K words (DM: 32K words, EM: 32K words x 7 banks) CS1H-CPU65H I/O bits: 5,120, Program capacity: 60K steps Data Memory: 128K words (DM: 32K words, EM: 32K words x 3 banks) CS1H-CPU64H I/O bits: 5,120, Program capacity: 30K steps Data Memory: 64K words (DM: 32K words, EM: 32K words x 1 bank) CS1H-CPU63H I/O bits: 5,120, Program capacity: 20K steps Data Memory: 32K words (DM: 32K words, EM: 32K words x 1 bank) CS1G-CPU45H I/O bits: 5,120, Program capacity: 60K steps Data Memory: 128K words (DM: 32K words, EM: 32K words x 3 banks) CS1G-CPU44H I/O bits: 1,280, Program capacity: 30K steps Data Memory: 64K words (DM: 32K words, EM: 32K words x 1 banks) CS1G-CPU43H I/O bits: 960, Program capacity: 20K steps Data Memory: 64K words (DM: 32K words, EM: 32K words x 1 bank) CS1G-CPU42H I/O bits: 960, Program capacity: 10K steps Data Memory: 64K words (DM: 32K words, EM: 32K words x 1 bank) CPU Backplanes CS1W-BC022 2 slots (Connection is not possible to Expansion Backplane.) Power Supply pp y M d l Modules CS1W-BC032 CS1W-BC052 CS1W-BC082 CS1W-BC102 C200HW-PA204 C200HW-PA204S 3 slots 5 slots 8 slots 10 slots 100 to 120 VAC or 200 to 240 VAC, Output capacity: 4.6 A, 5 VDC 100 to 120 VAC or 200 to 240 VAC (0.8 A 24 VDC service power ) Output capacity: 4.6 A, 5 VDC C200HW-PA204R 100 to 120 VAC or 200 to 240 VAC (with RUN output) Output capacity: 4.6 A, 5 VDC C200HW-PD024 C200HW-PA209R 24 VDC, Output capacity: 4.6 A, 5 VDC 100 to 120 VAC or 200 to 240 VAC (with RUN output) Output capacity: 9 A, 5 VDC I/O Control Module CS1W-IC102 Memoryy Cards HMC-EF172 HMC-EF372 HMC-EF672 HMC-AP001 Connects to CS1 Expansion Racks (two Terminating Resistors included). Must be used together with I/O Interface Modules to connect Long-distance Expansion Racks (50 m max.). Not required to connect CS1 Expansion Racks within 12 m. Flash memory, 15 MB (See note.) Flash memory, 30 MB (See note.) Flash memory, 64 MB (See note.) Memory Card adapter These Backplanes are for CS1 Modules only. Use CS1W-BCjj3 Backplanes for C200H Modules. Modules (This table continues on the next page.) Note: HMC-EF172/EF372/EF672flash memory cannot be used with CS1G-CPUjjH, CS1H-CPUjjH, CJ1G-CPUjjH, or CJ1H-CPUjjH Modules predating lot number 020108 (i.e., manufactured before January 8, 2002) or with NS-7-series products predating lot number 0852 (i.e., manufactured before May 8, 2002) cannot be used together. C--150 Programmable Controller CS1 System Power and Expansion CPU Rack Products Used in CPU Rack (continued) Name Serial Communications Boards Programming g g Consoles Programming g g Console Connection C bl Cables CX-Programmer g Model CS1W-SCB21-V1 CS1W-SCB41-V1 CQM1-PRO01-E C200H-PRO27-E CS1W-CN114 CS1W-CN224 CS1W-CN624 WS02-CXPC1-EV3 WS02-CXPC1-EV3L03 (For 3 licenses) WS02-CXPC1-EV3L10 (For 10 licenses) Programming g g Device Connecting g C bl (for Cables (f peripheral i h l port)) Programming Device Connecting Cables (for ( RS-232C port) p ) CX-Simulator Specifications 2 x RS-232C ports, protocol macro function 1 x RS-232C port + 1 x RS-422/485 port, protocol macro function An English g Keyboard y Sheet (CS1W-KS001-E) ( ) is required. q Connects the CQM1-PRO01-E Programming Console. (Length: 0.05 m) Connects the C200H-PRO27-E Programming Console. (Length: 2.0 m) Connects the C200H-PRO27-E Programming Console. (Length: 6.0 m) Windows-based Support pp Software for Windows 95/98/Me / / or Windows NT/2000/XP Note: Can connect through peripheral port or through RS RS-232C 232C port on CPU Module or Serial Communications Board. CS1W-CN118 CS1W-CN226 CS1W-CN626 XW2Z-200S-CV CBL--202* Connects DOS computer, D-Sub 9-pin receptacle (Length: 0.1 m) Connects DOS computer, D-Sub 9-pin (Length: 2.0 m) Connects DOS computer, D-Sub 9-pin (Length: 6.0 m) Connects DOS computer, D-Sub 9-pin (Length: 2.0 m) XW2Z-500S-CV XW2Z-200S-V CBL-202* Connects DOS computer, D-Sub 9-pin (Length: 5.0 m) Connects DOS computer, D-Sub 9-pin (Length: 2.0 m) (For Host Link connection) XW2Z-500S-V Connects DOS computer, D-Sub 9-pin (Length: 5.0 m) (For Host Link connection) WS02-SIMC1-E Windows-based Support Software for Windows 95, 98, Me, NT, or 2000 Simulates operation for CS1 CS1H/CS1G-CPUjj CPU Modules without "V1" at the end of the model number. CX-Protocol WS02-PSTC1-E Windows-based Support Software for Windows 95, 98, Me, 2000 or NT Used to create and manage protocol macros. Battery Set CS1W-BAT01 For CS1 Series only. Use a replacement battery that is no more than 2 years old from the date of manufacture. * Available in Canada only. Programmable Controller CS1 C--151 System Power and Expansion CPU Rack J Expansion Rack Configuration Rack Configuration Remarks CS1 Expansion p Rack CS1 Expansion I/O Backplane One of each Module is required. q Power Supply Module For connection to a CPU Backplane or CS1 Expansion I/O Backplane: CS1 I/O Connecting Cable For connection to a C200H Expansion I/O Backplane: CS1 to C200H I/O Connecting Cable C200H Expansion p I/O / R k Rack C200H Expansion I/O Backplane One of each Module is required. q Power Supply Module A CS1 Expansion Rack cannot be connected after a C200H Expansion I/O Rack. For connection to a CPU Backplane or CS1 Expansion I/O Backplane: CS1 to C200H I/O Connecting Cable For connection to a C200H Expansion I/O Backplane: C200H I/O Connecting Cable J Products Used in Expansion Racks Name CS1 Expansion p I/O / B k l Backplanes C200H Expansion p I/O / B k l Backplanes Power Supply Modules Model CS1W-BI032 CS1W-BI052 CS1W-BI082 CS1W-BI102 C200HW-BI031 C200HW-BI051 C200HW-BI081-V1 C200HW-BI101-V1 C200HW-PA204 Specifications These Backplanes p are for CS1 3 slots Modules only. only 5 slots Use CS1W-BIjj3 Backplanes for C200H Modules. 8 slots 10 slots 3 slots 5 slots 8 slots 10 slots 100 to 120 VAC or 200 to 240 VAC C200HW-PA204S Output capacity: 4.6 A, 5 VDC 100 to 120 VAC or 200 to 240 VAC (with power output terminal: 0.8 A, 24 VDC) C200HW-PA204R Output capacity: 4.6 A, 5 VDC 100 to 120 VAC or 200 to 240 VAC (with RUN output) C200HW-PD024 C200HW-PA209R Output capacity: 4.6 A, 5 VDC 24 VDC 100 to 120 VAC or 200 to 240 VAC (with RUN output) I/O Interface Module CS1W-II102 CS1 I/O Connecting Cables CS1W-CN313 Output capacity: 9 A, 5 VDC Connects CS1 Expansion Racks. Must be used together with I/O Control Module to connect Long-distance Expansion Racks (50 m max.). Not required to connect CS1 Expansion Racks within 12 m. Connects CS1 Expansion I/O Backplanes to CPU Backplanes or other CS1 Expansion I/O Backplanes. p p p CS1W-CN713 When using a CS1W-CN313 or CS1W-CN713 I/O Connecting Cable with a CS1j-CPUjjH CPU Module, Module use only Cables produced on or after September 20, 2001 (production number 2091). (p ) Cables with no production p number, b a 6-digit 6 di i production d i number, b or produced d d before b f September 20, 2001, cannot be used. CS1W-CN223 CS1W-CN323 CS1W-CN523 Reading the production number jjjj CS1W-CN133 CS1W-CN133-B2 C--152 Programmable Controller Year (e.g., (e g 1997=7) Month (1 to 9, X (10), Y (11), Z (12)) Day (01 to 31) Cable Length --- --- 0.3 m 0.7 m 2m 3m 5m 10 m 12 m CS1 System Power and Expansion CPU Rack J Products Used in CPU Racks Name Long-distance g Connecting g C bl Cables CS1-C200H I/O / C Connecting i Cables C bl C200H I/O / Connecting g C bl Cables Model CV500-CN312 CV500-CN612 CV500-CN122 CV500-CN222 CV500-CN322 CV500-CN522 CV500-CN132 CV500-CN232 CV500-CN332 CV500-CN432 CV500-CN532 CS1W-CN311 CS1W-CN711 CS1W-CN221 CS1W-CN321 CS1W-CN521 CS1W-CN131 CS1W-CN131-B2 C200H-CN311 C200H-CN711 C200H-CN221 C200H-CN521 C200H-CN131 Specifications For Long-distance g Expansion p Racks Connects the I/O Control Module to I/O Interface Modules or connects one I/O Interface Module to the next I/O Interf face M d l Module. Connects C200H Expansion p I/O / Backplanes p to CPU B k l Backplanes or CS1 E Expansion i I/O Backplanes. B k l Connects C200H Expansion p I/O / Backplanes p to other C200H E Expansion i I/O Backplanes. B k l Cable Length 0.3 m 0.6 m 1m 2m 3m 5m 10 m 20 m 30 m 40 m 50 m 0.3 m 0.7 m 2m 3m 5m 10 m 12 m 0.3 m 0.7 m 2m 5m 10 m J Expansion Rack Patterns The following diagrams show the 5 possible patterns of Expansion Racks. CPU Rack with CS1 Expansion Racks CPU Rack with CS1 Expansion Racks and C200H Expansion I/O Racks CPU Rack CPU Rack CS1 I/O Connecting Cable 12 m CS1 I/O Connecting Cable CS1 Expansion Rack CS1 I/O Connecting CS1 Expansion Rack Cable 12 m 7 Racks max. CS1 I/O Connecting Cable CS1 Expansion Rack CS1 to C200H I/O Connecting Cable CS1 Expansion Rack C200H Expansion I/O Rack 7 Racks max. (Three C200H Expansion I/O Racks max.) C200H I/O Connecting Cable C200H I/O Connecting Cable C200H Expansion I/O Rack Programmable Controller CS1 C--153 System Power and Expansion CPU Rack CPU Rack with CS1 Long-Distance Expansion Racks I/O Control Module CPU Rack Long-distance Connecting Cables I/O Interface Module I/O Interface Module CS1 Expansion Rack CS1 Expansion Rack Long-distance Connecting Cable Long-distance Connecting Cable I/O Interface Module I/O Interface Module CS1 Expansion Rack CS1 Expansion Rack 50 m 50 m Long-distance Connecting Cable I/O Interface Module Long-distance Connecting Cable I/O Interface Module CS1 Expansion Rack Long-distance Connecting Cable I/O Interface Module Terminating Resistor CS1 Expansion Rack Terminating Resistor Note: C200H Modules cannot be mounted to Long-distance Expansion Racks. CPU Rack with C200H Expansion I/O Racks CPU Rack CS1 to C200H I/O Connecting Cable 12 m C200H I/O Connecting Cable C200H Expansion I/O Rack C200H Expansion I/O Rack 3 Racks max. C200H I/O Connecting Cable C--154 CS1 Expansion Rack C200H Expansion I/O Rack Programmable Controller CS1 Up to 7 Racks in 2 series System Power and Expansion CPU Rack CPU Rack with CS1 Expansion Rack and CS1 Long-Distance Expansion Racks CPU Rack CS1 I/O Connecting Cables 0.7 m I/O Control Module CS1 Expansion Rack Long-distance Connecting Cables I/O Interface Module CS1 Expansion Rack I/O Interface Module CS1 Expansion Rack 50 m Long-distance Connecting Cable Long-distance Connecting Cable I/O Interface Module CS1 Expansion Rack I/O Interface Module CS1 Expansion Rack 50 m Long-distance Connecting Cable I/O Interface Module Terminating Resistor Up to 6 Racks in 2 series CS1 Expansion Rack Note: Long-distance Connecting Cable I/O Interface Module CS1 Expansion Rack Note: Terminating Resistor C200H Modules cannot be mounted to Long-distance Expansion Racks. (They can be mounted to the CS1 Expansion Rack with the I/O Control Module mounted.) Programmable Controller CS1 C--155 System Power and Expansion I/O Allocations J I/O Allocations In CS1 PLCs, part of the I/O memory is allocated to each Module. Modules are divided into the following 3 groups for allocations. * Basic I/O Modules * Special I/O Modules * CS1 CPU Bus Modules Basic I/O Modules Allocations CIO Area: CIO 0000 to CIO 0319 (See Note 1.) (Memory is allocated in word Modules in order of mounting position in the Racks.) Note 1. The Rack's first word setting can be changed from the default setting (CIO 0000) to any word from CIO 0000 to CIO 9999. The first word setting can be changed only with a Programming Device other than a Programming Console. CS1 Basic I/O Modules C200H Basic I/O Modules 2. The Module number setting on the front of C200H Group-2 High-density I/O Modules is ignored. Words are allocated to these Modules based on their location in the Rack. C200H Group-2 High-density I/O Modules (See Note 2.) Special I/O Modules Allocations Special I/O Module Area: CIO 2000 to CIO 2959 (Each Module is allocated ten words based on its Module number.) Note 1. Although there are 80 Module number settings, a maximum of 80 Modules can actually be mounted to a PLC because that is the maximum number of slots possible. 2. Some Modules classified as I/O Modules (namely C200H High-density I/O Modules) are actually treated as Special I/O Modules. CS1 Special I/O Modules C200H Special I/O Modules (See Note 2.) CS1 CPU Bus Modules Allocations CS1 CPU Bus Module Area: CIO 1500 to CIO 1899 (Each Module is allocated 25 words based on its Module number.) CS1 CPU Bus Modules C--156 Programmable Controller CS1 System Power and Expansion I/O Allocations Basic I/O Modules include CS1 Basic I/O Modules, C200H Basic I/O Modules, and C200H Group-2 High-density I/O Modules. Allocated words in the CIO Area:CIO 0000 to CIO 0319 2. Allocations to CS1 Expansion and C200H Expansion I/O Racks I/O allocations to Basic I/O Modules continues from the CPU Rack to the Expansion Racks. Words are allocated from left to right and each Module is allocated as many words as it requires in word Modules, just like Modules in the CPU Rack. Basic I/O Modules can be mounted to the CPU Rack, CS1 Expansion Racks, and C200HX/HG/HE Expansion I/O Racks. Note: CPU CIO 0000 CS1 Basic I/O Modules cannot be mounted to C200HX/ HG/HE Expansion I/O Racks. Power Supply J Allocations to Basic I/O Module Groups CPU Rack Allocation Methods Basic I/O Modules on the CPU Rack are allocated words left to right; Modules are allocated as many words as required in word Modules. Power Supply 1. CPU Rack Words allocated in order from Rack nearest CPU Rack. CS1 Expansion Rack CPU Rack Power Supply CPU Unit CIO 0000 Power Supply Module Slot numbers 2, 3, 5, 8, and 10 IN 16 IN 64 OUT OUT 8 32 CIO CIO CIO CIO 0000 0001 0002 0006 to 0005 CIO 0007 to 0008 Power Supply Module IN 8 CPU Unit Example CS1 Expansion Rack CPU Rack Programmable Controller CS1 C--157 System Power and Expansion I/O Allocations 3. CS1 Long-distance Expansion Racks Words are allocated to series A and then series B. Otherwise, allocations are the same as for other Racks. Power Supply Unit CPU Unit CPU Rack Power Supply Unit I/O Control Module Series Series B A CS1 Expansion Rack Power Supply Unit I/O Interface Module I/O Interface Module Power Supply Unit Terminating resistance CS1 Expansion Rack CS1 Expansion Rack Power Supply Unit I/O Interface Module CS1 Expansion Rack I/O Interface Terminating Module resistance C--158 Programmable Controller CS1 System Power and Expansion I/O Allocations J Allocations to Special I/O Modules J Allocations to CS1 CPU Bus Modules Special I/O Modules include CS1 Special I/O Modules and C200H Special I/O Modules. Each CS1 CPU Bus Module is allocated 25 words in the CS1 CPU Bus Module Area (CIO 1500 to CIO 1899). Each of these Modules is allocated ten words in the Special I/O Module Area (CIO 2000 to CIO 2959). CS1 CPU Bus Modules can be mounted to the CPU Rack or CS1 Expansion Racks. Special I/O Modules can be mounted to the CPU Rack, CS1 Expansion Racks, and C200H Expansion I/O Racks*. Each Module is allocated 25 words in the CPU Bus Module Area, as shown in the following table. Note: *CS1 Special I/O Modules cannot be mounted to C200H Expansion I/O Racks. Each Module is allocated 10 words in the Special I/O Module Area, as shown in the following table. Module number Words allocated 0 CIO 2000 to CIO 2009 1 CIO 2010 to CIO 2019 2 CIO 2020 to CIO 2029 15 CIO 2150 to CIO 2159 95 CIO 2950 to CIO 2959 Note: Module number Words allocated 0 CIO 1500 to CIO 1524 1 CIO 1525 to CIO 1549 2 CIO 1550 to CIO 1574 15 CIO 1875 to CIO 1899 Note: CS1 CPU Bus Modules are ignored during I/O allocation to Basic I/O Modules. Slots containing CS1 CPU Bus Modules are treated as empty slots. Special I/O Modules are ignored during I/O allocation to Basic I/O Modules. Slots containing Special I/O Modules are treated as empty slots. Programmable Controller CS1 C--159 System Power and Expansion Current Consumption The amount of current/power that can be supplied to the Modules mounted in a Rack is limited by the capacity of the Rack's Power Supply Module. The system must be designed so that the total current consumption of the Modules does not exceed the maximum current for each voltage group and the total power consumption does not exceed the maximum for the Power Supply Module. J CPU Racks and Expansion Racks The following table shows the maximum currents and power that can be supplied by Power Supply Modules on CPU Racks and Expansion Racks (both CS1 Expansion Racks and C200H Expansion I/O Racks). Note: 1. When calculating current/power consumption in a CPU Rack, be sure to include the power required by the CPU Backplane and CPU Module themselves. 2. Likewise, be sure to include the power required by the Expansion Backplane itself when calculating current/power consumption in an Expansion Rack. Power Supply pp y Module Max. Current Consumption 5-V group 26-V group 24-V group Max. Total Power C Consumption i C200HW-PA204 4.6 A 0.6 A None 30 W C200HW-PA204S 4.6 A 0.6 A 0.8 A 30 W C200HW-PA204R 4.6 A 0.6 A None 30 W C200HW-PD204 4.6 A 0.6 A None 30 W C200HW-PA209R 9A 1.3 A None 45 W Be sure both Condition 1 and Condition 2 are met. Condition 1: Maximum Current Supply 1. Current required at 5 VDC by all Modules (A) Max. Current shown in table 2. Current required at 26 VDC by all Modules (B) Max. Current shown in table 3. Current required at 24 VDC by all Modules (C) Max. Current shown in table Condition 2: Maximum Total Current Supply 1. A x 5 VDC + B x 26 VDC + C x 24 VDC Max. Power shown in table J Example Calculations Example 1 In this example, the following Modules are mounted to a CPU Rack with a C200HW-PA204S Power Supply Module. Module Model Quantity 5-VDC 26-VDC 24-VDC CPU Backplane (8 slots) CS1W-BC083 1 0.11 A --- --- CPU Module CS1H-CPU67-EV1 1 1.10 A --- --- Input p Modules C200H-ID216 2 0.10 A --- --- CS1W-ID291 2 0.20 A --- --- Output Modules C200H-OC221 2 0.01 A 0.075 A --- Special I/O Module C200H-NC213 1 0.30 A --- --- CPU Bus Module CS1W-CLK21 1 0.50 A --- --- 0.3 A used --- --- 0.3 A 2.63 A (4.6) x 5 V = 13.15W 0.15 A 0.6A) x 26 V = 3.9 W 0.3 A 0.8A) x 24 V = 7.2 W Service Power Supply Module (24 VDC) Total current/power consumption 13.15+3.9+7.2 = 24.25 (30 W) C--160 Programmable Controller CS1 System Power and Expansion Current Consumption J Current Consumption Tables 5-VDC Voltage Group Name Model Consumption (A) CPU Modules CS1H-CPU67H 0.82 (See note.) (These values include current consumption by a Programming Console.) CS1H-CPU66H 0.82 (See note.) CS1H-CPU65H 0.82 (See note.) CS1H-CPU64H 0.82 (See note.) CS1H-CPU63H 0.82 (See note.) CS1G-CPU45H 0.78 (See note.) CS1G-CPU44H 0.78 (See note.) CS1G-CPU43H 0.78 (See note.) CS1G-CPU42H 0.78 (See note.) CS1W-SCB21-V1 0.28 (See note.) CS1W-SCB41-V1 0.36 (See note.) CS1W-BC022 0.11 CS1W-BC032 0.11 CS1W-BC052 0.11 CS1W-BC082 0.11 CS1W-BC102 0.11 CS1W-BC023 0.11 CS1W-BC033 0.11 CS1W-BC053 0.11 CS1W-BC083 0.11 CS1W-BC103 0.11 I/O Control Module CS1W-IC102 0.92 CS1 Expansion Backplanes (for CS1 Modules only) CS1W-BI032 0.23 CS1W-BI052 0.23 CS1W-BI082 0.23 CS1W-BI102 0.23 CS1W-BI033 0.23 CS1W-BI053 0.23 CS1W-BI083 0.23 CS1W-BI103 0.23 I/O Interface Module CS1W-II102 0.23 C200H Expansion I/O Backplanes C200HW-BI031 0.15 C200HW-BI051 0.15 C200HW-BI081-V1 0.15 C200HW-BI101-V1 0.15 Serial Communication Boards CPU Backplanes (for CS1 Modules only) CPU Backplanes CS1 Expansion Backplanes Note: Add 0.15 A per port when the NT-AL001-E is connected. Basic I/O Modules Category Name Model Consumption (A) C200H Input Modules DC Input Modules C200H-ID211 0.01 C200H-ID212 0.01 C200H-IA121 0.01 C200H-IA122 0.01 C200H-IA122V 0.01 C200H-IA221 0.01 C200H-IA222 0.01 C200H-IA222V 0.01 C200H-IM211 0.01 C200H-IM212 0.01 C200H-B7AI1 0.10 C200H-B7A12 0.10 C200HS-INT01 0.02 AC Input Modules AC/DC Input Modules B7A Interface Modules Interrupt Input Modules (This table continues on the next page.) Programmable Controller CS1 C--161 System Power and Expansion Current Consumption Basic I/O Modules (continued) Category Name Model Consumption (A) C200H Group Group-2 2 High High-density density I Input tM Modules d l DC Input Modules C200H-ID216 0.10 C200H-ID217 0.12 C200H-ID218 0.10 C200H-ID219 0.12 C200H-ID111 0.12 CS1W-ID211 0.10 CS1W-ID231 0.15 CS1W-ID261 0.15 CS1W-ID291 0.20 CS1W-IA111 0.11 CS1W-IA211 0.11 Interrupt Input Module CS1W-INT01 0.10 High-speed Input Module CS1W-IDP01 0.10 Safety Relay Module CS1W-SF200 0.10 Relay Output Modules C200H-OC221 0.01 C200H-OC222 0.01 C200H-OC222N 0.008 C200H-OC225 0.05 C200H-OC226N 0.03 C200H-OC223 0.01 C200H-OC224 0.01 C200H-OC224N 0.01 C200H-OD411 0.14 C200H-OD213 0.14 C200H-OD214 0.14 C200H-OD216 0.01 C200H-OD211 0.16 C200H-OD217 0.01 C200H-OD212 0.18 C200H-OD21A 0.16 C200H-B7A01 0.10 C200H-B7A02 0.10 C200H-OA223 0.18 C200H-OA222V 0.20 C200H-OA224 0.27 CS1W-OC201 0.10 CS1W-OC211 0.13 CS1W-OD211 0.17 CS1W-OD212 0.17 CS1W-OD231 0.27 CS1W-OD232 0.27 CS1W-OD261 0.39 CS1W-OD262 0.39 CS1W-OD291 0.48 CS1W-OD292 0.48 CS1W-OA201 0.23 max. (0.07+0.02x No. of points ON) CS1W-OA211 0.406 max. (0.07+0.021xNo. of points ON) C200H-OD218 0.27 C200H-OD21B 0.48 C200H-OD219 0.48 CS1 Input Modules DC Input Modules AC Input Modules C200H Output Modules Transistor Output Modules B7A Interface Modules Triac Output Modules CS1 Output Modules Relay Output Modules Transistor Output Modules Triac Output Modules C200H Group Group-2 2 High High-density density O t tM Output Modules d l Transistor Output Modules (This table continues on the next page.) C--162 Programmable Controller CS1 System Power and Expansion Current Consumption Basic I/O Modules (continued) Category Name Model Consumption (A) CS1W-MD261 0.27 CS1W-MD262 0.27 CS1W-MD561 0.27 CS1 I/O Modules CS1W-MD291 0.35 CS1 I/O Modules CS1W-MD292 0.35 C200H-B7A21 0.10 C200H-B7A22 0.10 C200H-TM001 0.06 CS1 I/O Modules DC Input/Transistor Output M d l Modules C200H I/O Modules B7A Interface Modules Analog Timer Module Special I/O Modules Category C200H Hi h d it I/O High-density Modules (Special I/O Modules) C200H Special I/O M Modules d l Name Model Consumption (A) DC Input Module C200H-ID215 0.13 TTL Input Module C200H-ID501 0.13 Transistor Output Module C200H-OD215 0.22 TTL Output Module C200H-OD501 0.22 TTL I/O Module C200H-MD501 0.18 DC Input Transistor Output Module C200H-MD215 0.18 C200H-MD115 0.18 C200H-TC001 0.33 C200H-TC002 0.33 C200H-TC003 0.33 C200H-TC101 0.33 C200H-TC102 0.33 C200H-TC103 0.33 C200H-TV001 0.33 C200H-TV002 0.33 C200H-TV003 0.33 C200H-TV101 0.33 C200H-TV102 0.33 C200H-TV103 0.33 C200H-TS001 0.45 C200H-TS002 0.45 C200H-TS101 0.45 C200H-TS102 0.45 C200H-PID01 0.33 C200H-PID02 0.33 C200H-PID03 0.33 Cam Positioner Module C200H-CP114 0.30 ASCII Modules C200H-ASC02 0.20 C200H-ASC11 0.25 C200H-ASC21 0.30 C200H-ASC31 0.30 C200H-AD001 0.55 C200H-AD002 0.45 C200H-AD003 0.10 C200H-DA001 0.65 C200H-DA002 0.60 C200H-DA003 0.10 C200H-DA004 0.10 Analog I/O Modules C200H-MAD01 0.10 High-speed High speed Counter Modules C200H-CT001-V1 0.30 C200H-CT002 0.30 C200H-CT021 0.45 Motion Control Module C200H-MC221 0.65 (w/ Teaching Box: 0.85 ) Position Control Modules C200HW- NC113 0.30 C200HW-NC213 0.30 C200HW-NC413 0.50 Temperature Control Modules Heat/Cool Temperature Control Modules Temperature Sensor Modules PID Control Modules Analog Input Modules Analog Output Modules (This table continues on the next page.) Programmable Controller CS1 C--163 System Power and Expansion Current Consumption Special I/O Modules (continued) Category C200H Special I/O M Modules d l Note: Name Model ID Sensor Modules Consumption (A) C200H-IDS01-V1 0.25 C200H-IDS21 0.25 Fuzzy Logic Module C200H-FZ001 0.30 Voice Module C200H-OV001 0.30 PC Card Module C200HW-PCV01 (See note.) DeviceNet Master Module C200HW-DRM21-V1 0.25 DeviceNet I/O Link Module C200HW-DRT21 0.25 Profibus-DP Master Module C200HW-PRM21 0.6 Profibus I/O Link Module C200HW-PRT21 0.25 CompoBus/S Master Module C200HW-SRM21-V1 0.15 PC Link Module C200H-LK401 0.35 The consumption depends on the commercial memory card used. Calculate the consumption using the following. +5 VDC, 0.7 A max. (for each Module) + PC card output current (Icard) I5V (1 slot) 0.5 A, I12V (1 slot) 0.1 A However, Icard = I5V (2 slots) + 3.4 x I12V (2 slots) 1.0 A Category CS1 Special I/O M d l Module Name Model Consumption (A) Analog Input Module CS1W-ADjjj 0.13 Analog Output Module CS1W-DAjjj 0.13 Analog I/O Module CS1W-MAD44 0.20 Isolated Thermocouple Input Module CS1W-PTS01 0.15 Isolated Temperature- resistance Thermometer Input Module CS1W-PTS02 Isolated Temperature- resistance Thermometer Input Module (Ni508.4 ) CS1W-PTS03 Isolated Two-wire Transmission Device Input Module CS1W-PTW01 Isolated DC Input Module CS1W-PDC01 Isolated Pulse Input Module CS1W-PPS01 Isolated Control Output Module CS1W-PMV01 Power Transducer Input Module CS1W-PTR01 0.08 100-mV 100 mV DC Input Module Motion Control Modules CS1W-PTR02 CS1W PTR02 CS1W-MC221 0.60 (w/ Teaching Box: 0.80 A) CS1W-MC421 0.70 (w/ Teaching Box: 1.00 A) CS1W-NC113/ 133 0.25 Position Control Modules 0.16 CS1W-NC213/ 233 CS1W-NC413/ 433 Customizable Counter Modules ID Sensor Modules C--164 Programmable Controller 0.36 CS1W-CT021 High-speed High speed Counter Modules CS1 CS1W-CT041 0.45 CS1W-CTS21 0.32 CS1W-HCP22 0.80 CS1W-HCA22 0.75 CS1W-HIO01 0.60 CS1W-V600C11 0.26 CS1W-V600C12 0.32 System Power and Expansion Current Consumption CS1 CPU Bus Modules Category CS1 CPU Bus Modules Name Consumption (A) CS1W-LC001 0.36 Controller Link Modules CS1W-CLK52-V1 0.65 CS1W-CLK21-V1 0.33 CS1W-CLK12-V1 0.52 CS1W-SLK21 0.48 CS1W-SLK11 0.47 Serial Communications Module CS1W-SCU21-V1 0.29 (See Note.) Ethernet Module CS1W-ETN01/11 0.40 CS1W-ETN21 0.38 CS1W-DRM21 0.29 SYSMAC LINK Module DeviceNet Module Note: Model Loop Control Module Add 0.15 A per port when the NT-AL001-E is connected. 26-V Current Consumption Category C200H Output Modules Name Relay Output Modules Model C200H-OC221 C200H-OC222 Consumption (A) 0.075 for 8 points ON att th the same time ti C200H-OC223 C200H-OC224 C200H-OC225 C200H-OC222N C200H-OC226N 0.09 for 8 points ON at th same time the ti C200H-OC224N Transistor Output Modules C200H-OD216 C200H-OD217 CS1 Output Modules C200H Special I/O Modules CS1 Special I/O Modules Relay Output Modules CS1W-OC201 0.075 for 8 points ON att th the same time ti CS1W-OC211 0.006 for each point ON att th the same time ti Analog Intput Module C200H-AD003 0.10 Analog Output Modules C200H-DA003 0.20 C200H-DA004 0.25 Analog I/O Module C200H-MAD01 0.20 ID Sensor Modules C200H-IDS01-V1 0.12 C200H-IDS21 0.12 Analog Input Module CS1W-ADjjj 0.10 Analog Output Modules CS1W-DA041 0.18 CS1W-DA08V 0.18 CS1W-DA08C 0.25 Analog I/O Module CS1W-MAD44 0.20 Isolated Thermocouple Input Module CS1W-PTS01-V1 0.15 Isolated Temperature- resistance Thermometer Input Module CS1W-PTS02 Isolated Temperature- resistance Thermometer Input Module (Ni508.4 ) CS1W-PTS03 Isolated Two-wire Transmission Device Input Module CS1W-PTW01 Isolated DC Input Module CS1W-PDC01 Isolated Pulse Input Module CS1W-PPS01 Isolated Control Output Module CS1W-PMV01 Power Transducer Input Module CS1W-PTR01 100-mV DC Input Module CS1W-PTR02 Customizable Counter Module CS1W-HCA22 0.15 ID Sensor Module CS1W-V600C11 0.12 Programmable Controller 0.16 0.08 CS1 C--165 System Power and Expansion Replacing C200H I/O Modules J Replacing C200H I/O Modules with CS1 I/O Modules This section shows the corresponding CS1 I/O models and notes for replacing C200H I/O Modules. 16-point DC Input Modules Item C200H I/O Modules Corresponding CS1 I/O Modules Model number C200H-ID212 CS1W-ID211 Description 16-point DC Input Modules with terminal blocks Notes The terminal arrangement must be changed. The impedance increases (from 3 k to 3.3 k). Check that correct operation is possible in cases where increased impedance may influence operation. The internal 5-V current consumption increases (from 10 mA to 100 mA). Check that the increased current is within the range of the power supply. 32-point DC Input Modules Item C200H I/O Modules Corresponding CS1 I/O Modules Model number C200H-ID218/C200H-ID216 CS1W-ID231 Description 32-point DC Input Modules with connectors. The connectors, the pin arrangement, and the input specifications are the same. Notes There are 2 commons instead of 1. Connect where necessary. The input specifications change (e.g., the impedance decreases and the input current increases from 4.1 mA to 6 mA.) Check that correct operation is possible in cases where changes in input specifications may influence operation. The internal 5-V current consumption increases (from 100 mA to 150 mA). Check that the increased current is within the range of the power supply. 64-point DC Input Modules Item C200H I/O Module Corresponding CS1 I/O Module Model number C200H-ID219/C200H-ID217 CS1W-ID261 Description 64-point DC Input Modules with connectors. The connectors, the pin arrangement, and the input specifications are the same. Notes There are 4 commons instead of 2. Connect where necessary. The input specifications change (e.g., the impedance decreases and the input current increases from 4.1 mA to 6 mA.) Check that correct operation is possible in cases where changes in input specifications may influence operation. The internal 5-V current consumption increases from 120 mA to 150 mA (C200H-ID219) and from 100 mA to 150 mA (C200H-ID217). Check that the increased current is within the range of the power supply. 16-point Sinking Transistor Output Modules Item C200H I/O Module Corresponding CS1 I/O Module Model number C200H-OD212 CS1W-OD211 Description 16-point Transistor Output (sinking) Modules with terminal blocks. The output current capacity increases (from 0.3 A per point and 4.8 A per Module to 0.5 A per point and 8 A per Module). he rated voltage range also increases (from 24 V to any voltage in the range 12 to 24 V.) Notes The terminal arrangement must be changed. The output specifications change. Check that correct operation is possible in cases where changes in output specifications may influence operation. (Residual voltage increases from 0.8 V to 1.5 V, ON response time increases from 0.1 ms to 0.5 ms, OFF response time increases from 0.3 ms to 1 ms.) C--166 Programmable Controller CS1 System Power and Expansion Replacing C200H I/O Modules 16-point Sourcing Transistor Output Modules Item C200H I/O Module Corresponding CS1 I/O Module Model number C200H-OD21A CS1W-OD212 Description 16-point Transistor Output (sourcing) Modules with terminal blocks. Notes The terminal arrangement must be changed. The output capacity changes (from 1 A per point and 4 A per Module to 0.5 A per point and 5 A per Module). Check that correct operation is possible in cases where changes in output capacity may influence operation. The output specifications change. Check that correct operation is possible in cases where changes in output specifications may influence operation. (Residual voltage increases from 0.8 V to 1.5 V, ON response time increases from 0.1 ms to 0.5 ms, OFF response time increases from 0.3 ms to 1 ms.) The internal 5-V current consumption increases (from 160 mA to 170 mA). The external 24-V power supply current also increases (from 35 mA to 40 mA). Check that the increased current is within the range of the power supply. There are no alarm output contacts. Use the alarm bits in the Auxiliary Area. 32-point Sinking Transistor Output Modules Item C200H I/O Module Corresponding CS1 I/O Module Model number C200H-OD218 CS1W-OD231 Description 32-point Transistor Output (sinking) Modules with connectors. The connectors and the pin arrangement are the same. The output current capacity increases (from 100 mA to 0.5 A per point, 2.5 A per common, and 5 A per Module). The load voltage range changes from 4.5 to 26.4 V to 10.2 to 26.4 V. Notes There are 2 commons instead of 1. Connect where necessary. The output specifications change. Check that correct operation is possible in cases where changes in output specifications may influence operation. (Residual voltage increases from 0.8 V to 1.5 V, ON response time increases from 0.1 ms to 0.5 ms, OFF response time increases from 0.4 ms to 1 ms.) Replacement is not possible for applications with an output load range of 4.5 to 10.2 V. The internal 5-V current consumption increases (from 180 mA to 270 mA). Check that the increased current is within the range of the power supply. 32-point Sourcing Transistor Output Modules Item C200H I/O Module Corresponding CS1 I/O Module Model number C200H-OD21B CS1W-OD232 Description 32-point Transistor Output (sourcing) Modules with connectors. The connectors and the pin arrangement are the same. Notes There are 2 commons instead of 1. Connect where necessary. The output specifications change. Check that correct operation is possible in cases where changes in output specifications may influence operation. (Residual voltage increases from 0.8 V to 1.5 V, ON response time increases from 0.1 ms to 0.5 ms, OFF response time increases from 0.3 ms to 1 ms.) The internal 5-V current consumption increases (from 180 mA to 270 mA). Check that the increased current is within the range of the power supply. Programmable Controller CS1 C--167 System Power and Expansion Replacing C200H I/O Modules 64-point Sinking Transistor Output Modules Item C200H I/O Module Corresponding CS1 I/O Module Model number C200H-OD219 CS1W-OD261 Description 64-point Transistor Output (sinking) Modules with connectors. The connectors and the pin arrangement are the same. The output current capacity increases (from 100 mA to 0.3 A per point, 1.6 A per common, and 6.4 A per Module). The load voltage range changes from 4.5 to 26.4 V to 10.2 to 26.4 V. Notes There are 4 commons instead of 2. Connect where necessary. The output specifications change. Check that correct operation is possible in cases where changes in output specifications may influence operation. (Residual voltage increases from 0.8 V to 1.5 V, ON response time increases from 0.1 ms to 0.5 ms, OFF response time increases from 0.4 ms to 1 ms.) Replacement is not possible for applications with an output load range of 4.5 to 10.2 V. The internal 5-V current consumption increases (from 270 mA to 390 mA). Check that the increased current is within the range of the power supply. 16-point 100-VAC Input Modules Item C200H I/O Module Corresponding CS1 I/O Module Model number C200H-IA122/122V CS1W-IA111 Description 16-point 100-VAC Input Modules with terminal blocks. 100-VDC input also possible. Notes The terminal arrangement must be changed. The input specifications change. Check that correct operation is possible in cases where changes in input specifications may influence operation. (ON voltage increases from 60 VAC min. to 65 VAC min. and the input impedance (50 Hz) increases from 9.7 k to 10 k.) The internal 5-V current consumption increases (from 10 mA to 110 mA). Check that the increased current is within the range of the power supply. 16-point 200-VAC Input Modules Item C200H I/O Module Corresponding CS1 I/O Module Model number C200H-IA222/222V CS1W-IA211 Description 16-point 200-VAC Input Modules with terminal blocks. The input specifications are the same. Notes The terminal arrangement must be changed. The internal 5-V current consumption increases (from 10 mA to 110 mA). Check that the increased current is within the range of the power supply. 8-point Triac Output Modules Item C200H I/O Module Corresponding CS1 I/O Module Model number C200H-OA223 CS1W-OA201 Description 8-point Triac Output Modules with terminal blocks. The output current capacity increases (from 4 A per Module to 4.8 A per Module). Notes The terminal arrangement must be changed. The maximum inrush current changes. Check that correct operation is possible in cases where changes in maximum inrush current may influence operation. (Changes from 15 A for a pulse width of 100 ms and 30 A for a pulse width of 10 ms to 10 A for a pulse width of 100 ms and 20 A for a pulse width of 10 ms.) The internal 5-V current consumption increases (from 180 mA to 230 mA). Check that the increased current is within the range of the power supply. C--168 Programmable Controller CS1 System Power and Expansion Replacing C200H I/O Modules 16-point Triac Output Modules Item C200H I/O Module Corresponding CS1 I/O Module Model number C200H-OA224 CS1W-OA211 Description 16-point Triac Output Modules with terminal blocks. The number of output points increases (from 12 to 16). The output current capacity also increases (from 2 A per Module to 4 A per Module). Notes The terminal arrangement must be changed. The output specifications change. Check that correct operation is possible in cases where changes in output specifications may influence operation. (Maximum inrush current decreases from 20 A for a pulse width of 10 ms to 15 A for a pulse width of 10 ms and the residual voltage increases from 1.5 VAC (50 to 500 mA) to 1.6 VAC.) The internal 5-V current consumption increases (from 270 mA to 406 mA). Check that the increased current is within the range of the power supply. 8-point Independent Relay Output Modules Item C200H I/O Module Corresponding CS1 I/O Module Model number C200H-OC224/OC224N CS1W-OC201 Description Relay Output Modules with 8 independent output points and terminal blocks. 100-VDC input also possible. Notes The terminal arrangement must be changed. The ON/OFF response time changes (C200H-OC224 only). Check that correct operation is possible in cases where an increased ON/OFF response time may influence operation. (Increases from 10 ms to 15 ms) The internal 5-V current consumption increases (from 10 mA to 100 mA). Check that the increased current is within the range of the power supply. 16-point Relay Output Modules Item C200H I/O Module Corresponding CS1 I/O Module Model number C200H-OC225/OC226N CS1W-OC211 Description 16-point Relay Output Modules with terminal blocks. Restrictions on the number of points per current for simultaneous turning ON of more than 1 contact are removed. 100-VDC input also possible. Notes The terminal arrangement must be changed. The ON/OFF response time changes (C200H-OC225 only). Check that correct operation is possible in cases where an increased ON/OFF response time may influence operation. (Increases from 10 ms to 15 ms) The internal 5-V current consumption increases (from the range 30 to 50 mA to 130 mA at 5 V and from the range 75 to 90 mA to 96 mA at 26 V.) Check that the increased current is within the range of the power supply. Programmable Controller CS1 C--169