ideal-tek s.a. manufacturer of high precision tools and instruments PCSA CIRCUIT BOARD HOLDER PCSA Circuit board holder PCSA-1 work surface: 290x280 Additional splint: BS-PCSS-1 Additional foam: PCSA-1.2 Pag. 2 PCSA-2 PCSA-4 work surface: 520x280 work surface: 520x410 Additional splint: BS-PCSS-2-4 Additional foam: PCSA-2.2 Additional splint: BS-PCSS-2-4 Additional foam: PCSA-4.2 Standard configuration: - 2 splints (sliding rail) - 1 central removable middle bridge - 1 cover - 1 foam rubber ESD safe ideal-tek s.a. via A. Monti 10, 6828 Balerna (switzerland) Tel. +41 (0)91 683 32 29 Fax +41 (0)91 683 03 71 info@ideal-tek.com www.ideal-tek.com PCSA Circuit board holder Pag. 3 PCSA-2 PCSA-4 FEATURE: - Circuit board holders of the PCSA series are the ideal tool for fitting circuit boards with components. The holder can easily be demounted in single parts and be reassembled in different combinations. - The standard models PCSA-1/2/4 are equipped with 1 removable middle bridge and 2 adjustable splints. Thus two work areas can be created. - Any circuit board holders can be fitted with additional subdivisors (4 for PCSA-1/2 and 6 for PCSA-4). That way small circuit boards can be used on several levels. BRIDGE = 1 SPLINT = 6 BRIDGE = 1 SPLINT = 4 BRIDGE = 1 SPLINT = 2 BRIDGE = 0 SPLINT = 2 PCSA-1 Combinations and work surface in mm Subject to changes. The manufacturer declines any responsability for potential damages to persons or objects due to inappropriate usage. ideal-tek s.a. via A. Monti 10, 6828 Balerna (switzerland) Tel. +41 (0)91 683 32 29 Fax +41 (0)91 683 03 71 info@ideal-tek.com www.ideal-tek.com PCSA Circuit board holder How to use PCSA detachable assembly jigs for pc board Pag. 4 PC Assembly jig with component-press lid closed screwed or clamped to work-top, in relation to the height of the components. Sliding rails may be positioned by means of selflocking sleeves. A system of springs makes it possible to insert and remove printed circuit boards without changing position of sleeves. Turn the knob to remove the middle bridge. Moveable couplings, located on the rear side of the assembly jigs for attaching the PC assembly jig to the frame. These couplings keep the PC assembly jig from detaching from the frame. Using pc board assembly jig in vertical position Foam rubber-lined lid for holding components in place. May be raised by applying pressure to front buttons. Positioning of the lower corners of the PC Assembly Jig in the toothed guides located on the frame. Positioning at 70 angle Positioning at 80 angle Positioning at 90 angle Easy to unslot and detach various parts. (Frame-PC holder unit-component-Press Lid). PC board assembly jig can be raised by turning lateral knobs. Self-adjustment to frame at right working angle, after unit raising. ideal-tek s.a. Practical use of PC Assembly Jig with PC Board in place. Unsoldering of components carried out with PC Assembly Jig in vertical positions. via A. Monti 10, 6828 Balerna (switzerland) Tel. +41 (0)91 683 32 29 Fax +41 (0)91 683 03 71 info@ideal-tek.com www.ideal-tek.com PCSA spare parts Pag. 5 PCSA-1 PCSA-2 BS-PCSS-1: Sliding rail PCSA-1.2: Foam ideal-tek s.a. PCSA-4 BS-PCSS-2-4: Sliding rail PCSA-2.2: Foam PCSA-4.2: Foam via A. Monti 10, 6828 Balerna (switzerland) Tel. +41 (0)91 683 32 29 Fax +41 (0)91 683 03 71 info@ideal-tek.com www.ideal-tek.com PCSA spare parts Pag. 6 PCSA-1 PCSA-2 PCSA-4 BS-PCSS-NBS: Sliding block MO-BS-PCSS: Spring SF-BS-PCSS: Ball diam. 5 mm IN-PCSS: Cover support AC-PCSA: Bush-Knob-Screw SR-PCSA: Bush SR-PCSS: Bush (old) PR-PCSS: Knob RIC-PCSA-N15: Pivot SC-PCSS: Cover clip lever ideal-tek s.a. via A. Monti 10, 6828 Balerna (switzerland) Tel. +41 (0)91 683 32 29 Fax +41 (0)91 683 03 71 info@ideal-tek.com www.ideal-tek.com PCSA Pag. 7 Rev.02 ideal-tek s.a. via A. Monti 10, 6828 Balerna (switzerland) Tel. +41 (0)91 683 32 29 Fax +41 (0)91 683 03 71 info@ideal-tek.com www.ideal-tek.com