RS-35 35W Single Output Switching Power Supply series Features : Universal AC input / Full range Protections: Short circuit / Over load / Over voltage Cooling by free air convection LED indicator for power on 100% full load burn-in test No load power consumption<0.5W All using 105 long life electrolytic capacitors Withstand 300VAC surge input for 5 second High operating temperature up to 70 Withstand 5G vibration test High efficiency, long life and high reliability 3 years warranty SPECIFICATION MODEL OUTPUT RS-35-3.3 RS-35-5 RS-35-12 RS-35-15 RS-35-24 RS-35-48 DC VOLTAGE 3.3V 5V 12V 15V 24V 48V RATED CURRENT 7A 7A 3A 2.4A 1.5A 0.8A CURRENT RANGE 0 ~ 7A 0 ~ 7A 0 ~ 3A 0 ~ 2.4A 0 ~ 1.5A 0 ~ 0.8A RATED POWER 23.1W 35W 36W 36W 36W 38.4W RIPPLE & NOISE (max.) Note.2 80mVp-p 80mVp-p 120mVp-p 120mVp-p 120mVp-p 200mVp-p VOLTAGE ADJ. RANGE 4.5 ~ 5.5V 2.0% 10.8 ~ 13.2V 1.0% 13.5 ~ 16.5V 1.0% 22 ~ 27.6V 1.0% 42 ~ 54V 1.0% VOLTAGE TOLERANCE Note.3 INPUT 2.9V ~ 3.6V 3.0% LINE REGULATION Note.4 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION Note.5 2.0% 1.0% 0.5% 0.5% 0.5% 0.5% SETUP, RISE TIME 500ms, 50ms/230VAC HOLD UP TIME (Typ.) 80ms/230VAC VOLTAGE RANGE 88 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY(Typ.) 76.5% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 0.8A/115VAC 0.55A/230VAC COLD START 36A/230VAC LEAKAGE CURRENT 1200ms, 50ms/115VAC at full load 15ms/115VAC at full load 125 ~ 373VDC (Withstand 300VAC surge for 5sec. Without damage) 80.5% 84.5% 86% 88% 88.5% 27.6 ~ 32.4V 55.2 ~ 64.8V <2mA / 240VAC 110 ~ 150% rated output power OVERLOAD PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT Protection type : Hiccup mode, recovers automatically after fault condition is removed 3.8 ~ 4.45V 5.75 ~ 6.75V 13.8 ~ 16.2V 17.25 ~ 20.25V Protection type : Hiccup mode, recovers automatically after fault condition is removed -25 ~ +70 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -40 ~ +85 , 10 ~ 95% RH 0.03%/ (0 ~ 50 ) VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE 10 ~ 500Hz, 5G 10min./1cycle, period for 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 approved HARMONIC CURRENT Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN61000-6-2 (EN50082-2), heavy industry level, criteria A I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH EMC EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B (Note 6) EMS IMMUNITY MTBF OTHERS DIMENSION PACKING NOTE 249Khrs min. MIL-HDBK-217F (25 99*82*36mm (L*W*H) 0.3Kg; 45pcs/14Kg/0.83CUFT ) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% to 100% rated load. 6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com) File Name:RS-35-SPEC 2010-10-18 http://store.iiic.cc/ RS-35 35W Single Output Switching Power Supply Mechanical Specification Case No. 932A series Unit:mm 9.5 1 2 3.5 2- 8.2 M3 82 3 40 4 20.5 40.5 5 55 5 3.5 5 88.5 99 6.5 87 3.5 3 36 Pin No. 1 2 3 17.5 2-M 18 Terminal Pin No. Assignment 28 3.5 74 Assignment AC/L AC/N FG Pin No. 4 5 Assignment DC OUTPUT -V DC OUTPUT +V Block Diagram fosc : 60KHz RECTIFIERS & FILTER EMI FILTER I/P RECTIFIERS & FILTER POWER SWITCHING DETECTION CIRCUIT FG O.L.P. +V -V CONTROL O.V.P. Derating Curve Static Characteristics (24V) 100 OUTPUT VOLTAGE (V) Others 80 3.3V,5V LOAD (%) 60 40 20 -25 -25 0 0 10 20 30 40 50 60 70 300 28 250 24 200 20 150 16 100 12 50 8 25 (HORIZONTAL) AMBIENT TEMPERATURE ( ) 60 80 100 120 140 160 180 200 220 240 OUTPUT RIPPLE (mVp-p) Ta=25 32 264 INPUT VOLTAGE (VAC) 60Hz File Name:RS-35-SPEC 2010-10-18 http://store.iiic.cc/